|
2316 | QCAD (main) | Feature Request | Low | Modify > Detect Duplicates: implement for infinite line... | Assigned | |
1 |
Task Description
Headline should already explain the issue ...
|
|
2308 | QCAD (main) | Feature Request | Low | Viewport Scale Field | Assigned | |
|
Task Description
It would be helpful if the scale field that appears while placing a viewport would also re-appear when the viewport is selected after it’s already been placed in the layout. It would also be helpful if the pre-populated values in the dropdown matched those in the global layout scale field.
|
|
2307 | QCAD/CAM | Feature Request | Low | Tools to create dogbones or corner overcut | Assigned | |
2 |
Task Description
The inside corners of profile tool paths have rounded inside corners. This occurs because the rounded outside the bit cannot make it all the way into the corner of the feature. Think of tracing the inside wall of a cardboard box with a can of soup. The can makes direct contact with the box walls, but its round shape is unable to completely fit into the tight corners— there’s always a gap.
In a dog-bone overcut (see the figure in attachment), the inside profile corner is enlarged into a semicircle, allowing the sharp edges of the mating piece to slide through without interference.
When a dog bone is applied to the inside corners, as shown in the second figure in the attachment, the joints fit together nicely!
The following website explains what should be implemented More elegant CNC dogbones
There are two ways to implement this tool. Either you modify the original design (as implemented in Fusion 360) or you can do it at the moment you define the tool path (Estlcam allows you to do this for example). See the feature Corner overcut, on Estlcam website
|
|
2301 | QCAD (main) | Feature Request | Low | Rotate preview on/off | Assigned | |
1 |
Task Description
Hi,
I believe prior QCAD version 3.22.0.0 there was no rotating preview. The rotating preview shows the outcome regarding to the chosen center point. I know that it is also common for move/copy. However, for me it is very confusing and difficult to chose the correct center point for a rotation if I’m constantly been distracted by the most of the time overlapping preview of my selection. This said if the drawing is very detailed I have to zoom in extremely to be able to snap to the right entity. That wouldn’t be necessary without the preview. Additional rotate a large drawing selections will compromise the performance - CPU is going like crazy.
It would be nice to have an option to turn this preview on/off.
|
|
2300 | QCAD (main) | Feature Request | Low | Duplicate layout blocks with contents | Assigned | |
2 |
Task Description
Add a tool to duplicate a layout block with contents.
|
|
2299 | QCAD (main) | Feature Request | Low | Add support for multi line attributes | Assigned | |
2 |
Task Description
Multiline attributes can contain linefeeds and formatting like MTEXT.
|
|
2296 | QCAD (main) | Feature Request | Low | Custom font type and size for command line widget | Assigned | |
|
Task Description
Would be nice to change default font type and size for command line widget.
|
|
2295 | QCAD (main) | Feature Request | Low | Deselect all with Escape key | Assigned | |
|
Task Description
I’m used to have persistant selection while drawing (Application Preferences > Graphics View:Appearance > Selection), but I’m missing deselection of all objects with ESC key. I have seen the option to deselect with right key, but it’s nice to have right key for context menu.
Currently ESC key cancels current active command, but would be nice if there is no command active to also deselect all features by default.
|
|
2294 | QCAD (main) | Feature Request | Low | Auto Zoom with middle mouse button | Assigned | |
|
Task Description
I tried to assign double click on middle-mouse button to zoomauto command, but it seems it’s not possible currently.
Would love to see this feature.
|
|
2293 | QCAD (main) | Feature Request | Low | insert attributes into a point element | Assigned | |
1 |
Task Description
Would it be possible to extend the tool for importing points with a label so that when importing points into the drawing (as it is now), the attributes of the point are taken from the csv file and written to the point’s own properties? See attachment. This would extend the functionality of the tool and I assume that it would also lay the foundation for the possible re-export of such points from the drawing to a csv file, including all the details.
|
|
2288 | QCAD (main) | Feature Request | Low | Layer State Widget | Assigned | |
3 |
Task Description
The option of a layer state widget would be a nice way to see and select between different layer states.
|
|
2287 | QCAD (main) | Feature Request | Very Low | Evaluate draw order for preference "Prevent white-on-wh... | Assigned | |
|
Task Description
The Application Preference setting “Graphics View - Appearance - Prevent white-on-white/black-on-black display” seems to be a global setting that doesn’t take the draw order into account. For example: With the setting enabled, it prevents creating a white hatch of a higher draw order on top of a larger, colored hatch with lower draw order (background). The preference does not seem to evaluate if the object is truly drawn as “white-on-white”.
With the preference enabled, setting the object color as “white” will set the “white” color label, but the object color actually stays black. Its hard to determine why it happens in that case.
Is it possible to let the global preference setting be applied to objects after evaluation of the draw order, and determine if the object actually is a true case of white-on-white?
My workaround: Disable the preference setting (I think it is default = on), and only enable it for ad-hoc checks of hidden and overlooked objects.
|
|
2282 | QCAD (main) | Feature Request | Low | Add a "Save As" command while editing blocks in place | Assigned | |
1 |
Task Description
As a heavy mechanical drawings user, it would help a lot to have an option to exit a block saving as a new name and making it a new entity from that time ahead.
Example: if a have a lot of screws, one of then is behind another peace and need the to have some lines changed to hidden style lines, in the flow of the work is great if I edit that screw in place and when exiting have the option to save as a new block, to don’t mess with other entities of the same block that I don’t want to change. Yes, there is a workaround that is duplicate and rename the block prior to the editing, but a save as seems to work easier.
Thanks Andrew and team!
|
|
2272 | QCAD (main) | Feature Request | Low | Support unit "US survey foot" | Assigned | |
|
Task Description
In the US, it is (unfortunately) still common to use US survey foot. It seems at least some DXF applications/libraries support this unit as a $INSUNITS value, some references:
There are two issues regarding this with QCAD:
If you open a document with $INSUNITS being 21, it’s reset to 0 (unitless/unspecified) when saved again, even when not changing anything.
It is not possible to select these units in the GUI.
I don’t know about standardization of these values, but my hope is that it’s at least possible to preserve the unit in an existing drawing. Given that this unit is supposed to be obsolete in some years, it might seem less important, but due to this transition, it might get even more important to be able to distinguish between units. Thanks!
|
|
2233 | QCAD/CAM | Feature Request | Low | More selection options to select sheets for nesting | Assigned | |
|
Task Description
I’m often in the situation that I have to select for nesting 50+ sheets. Currently is only a Shift + left mouse click selection possible. It would be nice if QCAD/CAM could get for the nesting / sheet selection additional a mouse rectangle area selection.
|
|
2229 | QCAD (main) | Feature Request | Low | Property Editor, option format property values as decim... | Assigned | |
|
Task Description
Angle Display is decimal although the decimal display is disabled in Application Preferences.
Format should be 17° 31’ 52” instead of 17.531111.
|
|
2227 | QCAD (main) | Feature Request | Low | CAM > CAM Export: post processor for tangential knife c... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=2&t=8342
|
|
2226 | QCAD (main) | Feature Request | Very Low | macOS: support proxy icon | Assigned | |
|
Task Description
Support proxy icon in title bar. This can be used to move the file to another folder using drag and drop.
|
|
2213 | QCAD/CAM | Feature Request | Low | Allow editing Spindle Speed separately for each Toolpat... | Assigned | |
1 |
Task Description
Hello dear CAM developers!
I need to use the same tool at different spindle speed in a single machining file. I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)
FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal. I need to be able to do both engraving and cutting in a single file. Alas! this laser tool is defined with a fix and unique number (99). Therefore I cannot define different laser tools with different speeds.
Many thanks Best regards.
|
|
2195 | QCAD (main) | Feature Request | Low | Saved views include memory of block | Assigned | |
1 |
Task Description
When saving a view, it would be great if the view also saved which block (model space, layout block, or any other block) that was active at the time the view was saved and when the view is later re-activated, the corresponding block would re-activate.
|
|
2192 | QCAD (main) | Feature Request | Low | Add "Define angle using mouse cursor" to Move and Rotat... | Assigned | |
2 |
Task Description
The “Define annge using mouse cursor” of the Rotate tool would be useful in the Move and Rotate Tool
|
|
2191 | QCAD (main) | Feature Request | Low | Extend the functionality of the Reorder tool | Assigned | |
3 |
Task Description
Add functions to the Reorder tool, similar to the functions of the counter tool, undo last step and start at any number, allowing corrections and restarting the tool part way through.
See the discussions at https://qcad.org/rsforum/viewtopic.php?f=32&t=8170
|
|
2189 | QCAD (main) | Feature Request | Low | Vertically and/or diagonally stacked fractions option. | Assigned | |
2 |
Task Description
The option for vertically and diagonally stacked fractions would be helpful for both the text creation tool and as the output of dimensions.
|
|
2182 | QCAD (main) | Feature Request | Low | Select > Select Previous | Assigned | |
3 |
Task Description
Select the previously selected entities.
|
|
2164 | QCAD/CAM | Feature Request | Low | Add ability to pan the 3D view with a modifier key and ... | Assigned | |
2 |
Task Description
With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.
|
|
2161 | QCAD (main) | Feature Request | Low | Make Polyline from Selection (OC) configurable for simp... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Not related to OS, nor version.
The method Polyline from Segments (OC) can be configured for tolerance and simplification in the Options Toolbar. The method Polyline from Selection (OG) has no UI or none showing.
OG retrieves a tolerance from QCAD.ini, what is initially not set:
var tolerance = RSettings.getDoubleValue("PolylineFromSelection/Tolerance", 0.001);
The tolerance will be default = 0.001 similar as the default in AppPrefs. The tolerance setting is included in QCAD.ini after changing the AppPrefs entry.
OG calls PolylineFromSelection.autoJoinSegments with this tolerance:
var counter = PolylineFromSelection.autoJoinSegments(di, tolerance, this);
PolylineFromSelection.autoJoinSegments calls PolylineFromSegments.createPolylineShape with simplification hard coded to true. (last parameter)
// create polyline from line, arc, spline or open polyline entity:
var polyline = PolylineFromSegments.createPolylineShape(
entity, doc, vTolerance, op, undefined,
traversed, callBacks, undefined, true);
I would like to see the simplification optional and default = true.
Regards, CVH
|
|
2127 | QCAD (main) | Feature Request | Low | Snap for predicted intersections while using "Restrict ... | Assigned | |
2 |
Task Description
I would like to request a new kind of snap: a “Restricted Intersection” snap that appears at the point where an entity would intersect with a line drawn from Relative Zero that fulfills the current EL criteria. “Restricted Intersection” snaps would be similar to other Relative Zero-based snaps (like “Perpendicular” and “Tangential”), but would predict the point of the snap from the EL constraints instead of the characteristics of the entity being snapped to. Naturally a value of 0 for angle or length would result in that constraint being ignored.
Additional operational flexibility could be achieved by allowing the snap to exist regardless of whether EL is actually in use. To be useful this would probably require determining snap locations based on angle OR length as opposed to angle AND length.
Implementing this new snap would allow, for example, for easily drawing a line of unknown (but determinable) length at a specified angle between a given point and a given entity (see discussion here), with the “Restricted Intersection” snap ensuring that the endpoint of the new line forms an intersection with the entity in question. Currently the same goal can be achieved a couple of different ways, but they all involve at least two separate steps.
|
|
2107 | QCAD (main) | Feature Request | Very Low | Add a button to the tool bar to allow for a quick backg... | Assigned | |
1 |
Task Description
I find myself with reasonable regularity needing to change the background color between black and white. It would be much more efficient to have a toggle button on the ribbon to make this sort of instant (kind of like the “screen based line types” button works but make it for background color and just between black and white or let people define their dark and light themes and toggle the background between the two.
|
|
2091 | QCAD (main) | Feature Request | Low | Toggle redrawing of hatches | Assigned | |
2 |
Task Description
Because modifying hatches have lag issues I’d like to propose a toggle that turns of the redrawing/rendering of the hatch. Especially while modifying the hatch.
The hatches always have a boundary that can be worked with right? So when we move or stretch the hatch we can still see the boundary and its handles to perform all the actions.
This could be a new view mode that turns of the view of the interior/pattern of the hatch but leave the boundary of the hatch. Or the draft mode can be extended to include simplified hatches while modifying.
Also see the discussion
|
|
2087 | QCAD (main) | Feature Request | Low | More options for "Paste along Entity" [PE] | Assigned | |
1 |
Task Description
“Paste” has already the options: To current layer, Overwrite layers, Overwrite blocks.
Would be a nice time saver to have the same options for “Paste along Entity” too.
|
|
2070 | QCAD (main) | Feature Request | Low | cropping image | Assigned | |
4 |
Task Description
It may be useful to insert the “image cropping” function both in top / bottom - right / left mode, and with polyline
|
|
2060 | QCAD (main) | Feature Request | Low | Dialog box for Layer Status | Assigned | |
1 |
Task Description
So far, layer status has only been implemented very rudimentarily. I wish something like a dialog box in which you can choose for each layer status, which layers belong to it and which not.
|
|
2057 | QCAD (main) | Feature Request | Low | Multiline tool | Assigned | |
2 |
Task Description
Implement a multiline tool.
|
|
2056 | QCAD (main) | Feature Request | Low | Option Duplicate layer (yy) inclusive all sub-layers. | Assigned | |
|
Task Description
If I’ve to duplicate a layer with a bunch of sub-layer it’s a kind of a Sisyphus task to get it done. Currently I have to duplicate each single layer. Then in an additional step I’ve to address each child layer to the proper parent layer.
Current lack: Marked parent layer with all sub-layer / Duplicate Layer / only ONE layer will be duplicated.
With other words: If I have to duplicate a layer with 5 sub-layer it requires 11 steps to get a copy of that tree ...
|
|
2037 | QCAD (main) | Feature Request | Low | Support alternative angle reference | Assigned | |
|
Task Description
E.g. 0 degrees at the top, clock-wise for positive direction, alternative angle units.
|
|
2034 | QCAD (main) | Feature Request | Low | Paint Properties to include modifying linetype scales w... | Assigned | |
|
Task Description
Previous Feature Request #1285, dated 2015, incorporated in QCADPro 3.24. I regularly adjust linetype scales on hidden, centreline and phantom lines to achieve the best appearance on the drawing when printed. I note the Paint Properties feature copies all the attributes of the chosen line but does not copy the scale. I have to change the scale of each line, even after ‘painting’. This copying all Properties is something AutoCAD does. I know I could change the line to Hidden2 etc. and tick the ‘scale lines’ box in Drawing Properties but that is not always successful- copying properties is a quick and useful way of achieving the required result. QCAD Pro 3.24 Windows10.
|
|
2018 | QCAD (main) | Feature Request | Low | Layer visibility setting per view/view-port | Assigned | |
6 |
Task Description
In a medium complex drawing it’s often too much details to have all layers in a drawing visible at once. Also, it is of great importance to be able to have a single model to avoid duplication of work and risk inconsistency.
So i would like to create a number of views where each view has selected layers visible (that makes sense for the purpose of the view) and then assign the views to different layout blocks (using view-ports) in paper-space to be able to setup printing of several views on the same page/PDF
This also means that view-ports would have to be aware of what view they are displaying (if any besides the standard-view). This will then make it possible for printouts of different views with selected layers visible (different for each view and view-port) and still have only one model. Today this is not possible.
As it is today the only limited workaround is to set the layers you want to display, print/PDF of that viewport on separate page, and then change it for the next page, and so on. The big drawback is that you cannot have two different views/view-ports on the same page with different layers visible. Also, for large drawing it is painful to have to do a lot of manual setup for each rendering of the complete drawing.
|
|
1999 | QCAD (main) | Feature Request | Low | Viewport: Add additional properties for controlling dim... | Assigned | |
3 |
Task Description
When working with multiple Viewports with different scale it could be very useful to have extra properties controlling how dimensions are rendered in the viewport:
1) E.g an extra “Dimension Scale” under “Scale” in the Viewport selection’s ‘Specific Properties’ section, could allow having the same size when printed. This Dimension Scale would be multiplied on top of the Scale value, but only for Dimensions rendering.
2) Toggle button for hiding any dimensions in the Viewport. Maybe this should be controlled by being able to specify a Layer that should be hidden in this Viewport only, then I could select my Dimensions layer here.
The Viewport properties: https://i.imgur.com/s07JtaB.png
|
|
1983 | QCAD (main) | Feature Request | Low | Trim All or Bulk Break out | Assigned | |
4 |
Task Description
This is a trim method I am missing in Qcad.
20 years ago it existed in CadKey. You had a bunch of lines or segments. You defined a (new) line or segment as cutter. ‘Trim All’. You pointed at the side of the cutter entity to trim all intersecting at that side.
Pritty the same as in this topic: https://qcad.org/rsforum/viewtopic.php?t=5221
Only in rare cases I can use Husky’s workaround as pro. It all depends on what else is in the clipping rectangle that is needed to trim all intended. If of no use all single crossing entities have to be chosen one by one.
Regards, CVH
|
|
1982 | QCAD (main) | Feature Request | Low | measure DIN 1356 | Assigned | |
|
Task Description
To measure in the format DIN 1356 , Architect It is hard work to do this manual input with meta characters.
|
|
1977 | QCAD (main) | Feature Request | Low | Corresponding coordinate format | Assigned | |
1 |
Task Description
Hi,
It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.
This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.
Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).
|
|
1976 | QCAD (main) | Feature Request | Low | Envelope at offset to a poly tool | Assigned | |
1 |
Task Description
See: https://www.qcad.org/rsforum/viewtopic.php?t=6650
|
|
1940 | QCAD/CAM | Feature Request | Low | CAM > CAM Configuration: Add program description | Assigned | |
1 |
Task Description
Add a program description to the CAM configuration dialog and export to postprocessors as variable.
See also: https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649
|
|
1934 | QCAD (main) | Feature Request | Low | Diametric text - overlaid | Assigned | |
|
Task Description
Diametric text is always placed above a horizontal measurement.
I often want to indicate both the inside and outside diameter of an object e.g. a wheel using diametric text. The text is overlaid and illegible.
To avoid text overlapping, I use Horizontal Aligned because I can control the position of the text to avoid illegible text.
A better method would be to alternate the placement of diametric text (alternatively) above and below a measurement so that in the majority of cases an overlap would be avoided.
Similarly for a vertical measurement, the text is overlaid and illegible.
When the angle is almost vertical, the angle controls the side the text appears however it also reverses the direction of the text (which is logical but not attractive).
Kind regards Simon
|
|
1930 | QCAD (main) | Feature Request | Low | Option disable "Auto Zoom on load" for saved "Layout Vi... | Assigned | |
|
Task Description
Hi,
my setting for “Auto Zoom on load” is checked to on. That works perfect for me for most of my drawings.
But if I save a drawing with Layout Viewports then I have to adjust every Viewport again after loading.
Would it be possible to have an option below Application Preferences / Graphics View / Appearance / Auto Zoom on load / ON which excludes drawings saved with Layout Viewports?
|
|
1928 | QCAD (main) | Feature Request | Low | Optionnally 'Auto clean up' after generation of NaN / N... | Assigned | |
1 |
Task Description
Some functions / methods can generate some sort off entity or part with NaN / Null / Null-lenght ... props. Some explicitly don’t and test their actions with isNull().
As these serve a purpose in some processes, trails of them can be part of the results. For some users Null / Null-lenght are meaningfull, for other users these produce errors down the line. In a few cases its a desirable feature eg. controlpoint spline. (Allthough there are no Null props involved with equal successively controlpoints)
Many problem post on the forum are related to Null - Zero and so on.
In some cases it can’t be undone by re-editing the drawing. https://qcad.org/bugtracker/index.php?do=details&task_id=1925
If it can’t be undone by Undo/Redo it is a bug. https://qcad.org/bugtracker/index.php?do=details&task_id=1757
In some cases there is a difference noticed after file save-close-open.
|
|
1926 | QCAD (main) | Feature Request | Low | No negative coordinate values ? (DO command) | Assigned | |
1 |
Task Description
Just starting with QCAD, for some hours now - really excellent user interface (compared to other low budget CADs, like DCAD, or BeckerCAD...) !
Surprisingly, point coordinates - entered via the command line, and shown with correct positions on the drawing- are not displayed correctly with the ‘dimordinate’ (DO) command. There are no negative values, even when the center point (0;0) is right in the middle of the drawing, so points left and below should have !
GW.G
|
|
1922 | dwg2bmp | Feature Request | Very Low | Add error message when requesting raster for a non-exis... | Assigned | |
|
Task Description
It would be nice if QCAD spit some kind of warning message when trying to render a layer with a name that doesn’t exist (and perhaps render nothing), rather than silently rendering an empty image. :D
See https://qcad.org/rsforum/viewtopic.php?f=33&t=6453
|
|
1920 | QCAD (main) | Feature Request | Very Low | Edit > Application Preferences: Add preference to disab... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447
|
|
1917 | QCAD (main) | Feature Request | Low | Automatic labels with static information of the drawing | Assigned | |
|
Task Description
I would like static information of the drawing (like scale, creation-date, modified-date, revision etc) to be available as automatic labels to be placed in the drawing (with selectable style, font etc)
This would greatly simplify the creatin of title sections in the drawing and making sure it is consistent with the actual drawing and not requiring manual “synchronization”.
|