|
1278 | QCAD (main) | Feature Request | Low | Layer list: store layer state independently of parent l... | Assigned | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3755
|
|
766 | QCAD (main) | Feature Request | Low | Layer List: Add "Lock All Layers" | Assigned | |
2 |
Task Description
To improve useability/efficiency I would like to propose the following changes/additions to the layer list:
1) Combining the show and hide button into one button.
Clicking once will hide all layers, clicking again will show them all again.
2) A “lock/unlock” button.
Clicking once will lock all layers, clicking again will unlock them all again.
Regarding the icons I suggest that instead of show both the black and grey version of the eye/lock, you could switch between them depending on the state the switch-button is in. Also the mouse-over-text could/should change with the state.
|
|
2340 | QCAD (main) | Feature Request | Low | Layer List / Block List: Link minus icon to keyboard de... | Assigned | |
|
Task Description
Referring to Layer List / Block List: It would improve the workflow if the Delete key on the keyboard would be linked to the minus icon (Delete). The command ER is also ignored in both list.
|
|
1701 | QCAD (main) | Feature Request | Low | Layer List / Block List: add filter input | Assigned | |
|
Task Description
Add text filter for layer list, block list.
|
|
1036 | QCAD (main) | Feature Request | Low | Layer list - drop down menu option | Assigned | |
|
Task Description
In the same way as the Pen tool has a drop down menu, would it be possible to have an option to configure the layer list in the same way. I am trying to create a bit more drawing space and it would be good if I could dock the layer list in the top of my window and only take up a single row space!
|
|
1851 | QCAD (main) | Suggestion | Low | Lateral surface of a cone | Assigned | |
|
Task Description
Module mise à plat d’un cone
Bonjour,
Serait il possible dans un futur d’ajouter un module de mise en plan de cone.
Une petite fenêtre sur lequel on donne par exemple : 1- Ø haut 2- angle de coupe du haut 3- hauteur du cône 4- Ø bas 5- angle du bas 6- épaisseur matière
Ce qui permettrai de sortir une mise en plan a plat de la forme
|
|
2386 | QCAD Community Edition | Bug Report | Low | Label "Linear format" missing in Property Editor | Assigned | |
|
Task Description
no task description |
|
2452 | QCAD (main) | Feature Request | Very Low | Keyboard Shortcut for Undo Last Point While Drawing Spl... | Assigned | |
1 |
Task Description
Instead of having to click on the toolbar, it would be useful to have a keyboard shortcut for undoing the last fit point (or control point) while drawing splines. Preferably it would also be nice to allow the user the ability to set what the keyboard shortcut is for this function.
|
|
2552 | QCAD (main) | Suggestion | Low | Keep Windows menu shortcuts (Alt+Key) unique per menu | Assigned | |
|
Task Description
Reason: Same underlined keys are used for different menus
Select and Snap = S, Dimension and Info = I, Modify and Misc = M,
|
|
853 | QCAD (main) | Feature Request | Low | Keep selection after undo ... | Assigned | |
2 |
Task Description
If I move something and it went wrong I can easily undo the last move and start over without the need of a re-selection. If I copy something and it went wrong I can undo the last copy but I have to re-select everything again.
It would be nice to keep the once chosen selection in both “undo” situation!
Same with similar functions like rotate etc. ....
|
|
2146 | QCAD (main) | Suggestion | Very Low | Keep 'Invisible' objects invisible while saving | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Related topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7882 Explanation found in REntity.cpp Listed as a Public Member Functions inherited from RObject
Regards, CVH
|
|
2415 | QCAD (main) | Bug Report | Very Low | Issues with OffsetBothSides | Assigned | |
1 |
Task Description
Andrew,
I can’t find any documentation concerning OffsetBothSides under Misc .. Modify. It is not listed in the QCAD features nor in the changelog.
There was a Feature Request FS#1130 for this, I think you might want to close that as being implemented.
The tool asks for a Line, Arc, Circle, Ellipse, Spline or Polyline. It also seems to act on shapes that can be exploded to such entities like Text, Dimension and Hatch entities.
There may be many ‘Result loop not closed’ or ‘No offsets possible’ warnings when hovering over entities on a drawing. The preview may be partially, one or two sided and even two sided partially and closed with semi-circles.
I only successfully created a dual offset for open Splines, open or logically open Polylines. All other attempts result in a single offset at the indicated side.
There are the usual exceptions for Polylines with arc-segments but that is related to small arc segments and being tangentially connected. Only tested it on a Win7 platform. I don’t suspect that version 3.27.8 includes a fix for that ...
Regards, CVH
|
|
1691 | QCAD (main) | Bug Report | Very Low | Issue with Layouts after "File-Revert" | Assigned | |
|
Task Description
QCad 3.19.2 Professional, 64bit, Liux Mint
Case: 1. Open some saved drawing with viewport entities on layout block (paper space). Print Preview mode is “On” automatically. 2. After “File-Revert” drawing is reopened on layout block (paper space), but now Print Previw mode is “Off” .
For example can try on “flange.dxf”
|
|
498 | QCAD (main) | Bug Report | Low | issue importing from Autocad | Assigned | |
|
Task Description
There is an issue importing from Autocad: lines and quotes (both arrows and text) appear too much big (see attachment). I can fix quotes modifying dimensions in “current drawing preferences”, but lines are still too thick. Autocad’s dxf are opened with right line thickness but wrong quotes. Furthermore, Autocad opens Qcad’s dxf files showing wrong quotes.
|
|
714 | QCAD (main) | Bug Report | Low | Isometric view tool bar doesn`t remain ' docked'. | Assigned | |
|
Task Description
Win 7 - 64 Isometric view tool bar doesn`t remain ' docked’ when re-opening QCAD.
|
|
1302 | QCAD (main) | Feature Request | Low | Isometric projection on the current layer | Assigned | |
1 |
Task Description
It would be very useful to have the same possibility for Isometric projection like the Paste tool etc.. An option which ask me to put a new Isometric projection on the current layer is right now missing. If I like to have this new Isometric Projection on a different layer I have to reselect the projection and move it to that layer. That is plain inconvenient.
|
|
980 | QCAD (main) | Bug Report | Low | Isometric Projection / blocks / wrong layer are used in... | Assigned | |
|
Task Description
Isometric Projection used on a selection which contains blocks will mix up the layer affiliations. No blocks - no problems
|
|
772 | QCAD (main) | Bug Report | Low | Isometric grid: toggle buttons not updated | Assigned | |
1 |
Task Description
- Switch isometric grid off - Switch isometric grid on using drawing preferences - Tool buttons don’t reflect correct status
|
|
2072 | QCAD (main) | Suggestion | Low | Inserted and flipped block mirrors text and dim | Assigned | |
|
Task Description
Text and/or DIM used in blocks will be mirrored if inserted with a vertical/horizontal flip option.
Text/DIM which was successfully used in previos QCAD versions are now mirrored if they are loaded in the current version.
Version 3.23.0 doesn’t shows this behavior.
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7206
|
|
1721 | QCAD (main) | Feature Request | Low | Insert table tool | Assigned | |
5 |
Task Description
Hi Andrew,
I’m not sure whether this has been added or suggested already. It would be great to have a built in QCAD table tool for producing cutting lists or bill of materials etc. A dedicated table tool would be a real boost to QCAD Pro ;)
Many thanks
Clive
|
|
228 | QCAD (main) | Feature Request | Low | Insert current date (and other fields) | Assigned | |
9 |
Task Description
Insert field into drawing that displays current date, file name, ...
|
|
2293 | QCAD (main) | Feature Request | Low | insert attributes into a point element | Assigned | |
1 |
Task Description
Would it be possible to extend the tool for importing points with a label so that when importing points into the drawing (as it is now), the attributes of the point are taken from the csv file and written to the point’s own properties? See attachment. This would extend the functionality of the tool and I assume that it would also lay the foundation for the possible re-export of such points from the drawing to a csv file, including all the details.
|
|
1287 | QCAD (main) | Feature Request | Low | Information tool shows absolute units in print preview | Assigned | |
1 |
Task Description
With that new feature the information tool shows the absolute paper units in the print preview mode instead of drawing units. So you can determine the exact size of an entity in the printout without manual calculating with the drawing units and the scale factor.
See also http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793
|
|
2494 | QCAD (main) | Bug Report | Very Low | Information scrip on drawing screen unaligned. | Waiting on User | |
|
Task Description
Please view the attachment.
Regards
Graeme
|
|
1051 | QCAD (main) | Feature Request | Low | Info tool, polygonal area, possibility for a postfix la... | Assigned | |
1 |
Task Description
... would be nice.
If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².
I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ...
|
|
1502 | QCAD (main) | Feature Request | Low | Info tool / Setting for Font and Size ... | Assigned | |
2 |
Task Description
It would be nice if the Info Tool / Add Measurement to drawing option would use the same settings like the “Dimension settings” for Font and Text height. It’s a kind of similar function in a drawing and should have the same style. Maybe with an on/off switch?
|
|
703 | QCAD (main) | Feature Request | Low | Info function -> contour for Hatch not closed ... | Assigned | |
1 |
Task Description
Task: If I like to make a hatch and the contour isn’t closed I get a Grey circle Info where the contour isn’t closed. Nice!
But ..... I have this Info only for ONE not proper connection and only for the moment when the mouse pointer is over the Hatch Tool Symbol.
If I have to zoom into the Problem - I will lose the Info where the problem is
To get the “Problem Info” back I have to select it again - but for that I have to zoom out ...............
It would be nice to have this “Problem Info” longer in the drawing - maybe until I solved all problems.
And it would be nice to have ALL Infos for not connected lines at the same time. It is not really helpful to repeat this function 20times if I have 20 connection problems ... ;)
|
|
2505 | QCAD (main) | Feature Request | Very Low | Info > Polygonal Area > Use dimension decimal format fo... | Assigned | |
1 |
Task Description
Andrew, On behalf of user Kmeelo
Polygonal Area adds measurements text with 12 decimal digits and then as short as possible.
Current formatting path see: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10450&p=42833#p42805
Related forum feature request: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=10458
I also see a misconception of the term ‘precision’. Numbers precision is the amount of significant digits disregarding the position of the decimal point. 12 decimal digits is about the largest precision for numbers with 5 integer digits.
Regards, CVH
|
|
2555 | QCAD/CAM | Suggestion | Low | Include tool description when selecting a tool. | Assigned | |
|
Task Description
Andrew,
At present QCAD/CAM the tool drop-down box displays tool number and diameter between brackets.
It would be more appropriate to display if it is a mill or a drill and/or the description of such. In a further stage of development ball-nose ... Conical ... And so on.
I have several specialized mills with the same diameter. End-mills, roughing mills, routing mills, face mills ....
Tools 1(ø6mm) or 2(ø6mm) don’t say much if tool 1 is a side-mill and tool 2 is a high speed drill for metal.
Related forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=10722
Regards, CVH
|
|
2371 | QCAD (main) | Suggestion | Low | Include more properties for polylines in the Selection ... | Assigned | |
1 |
Task Description
Andrew,
Not OS or Version depending.
We can’t filter on some specific properties of polylines.
Handy would be: - Global Width - Orientation
Specific: - Polyline Pattern But I don’t really search for them ... For some post-op I just need them all to be set to ‘No’. - # of vertices Filtering the complex from the more simple ones. - Including Bulges or not To seperate polylines with arc segments form others. There some operations that don’t really work with bulging. - Z values and/or global Z This would make sense for some but filtering on Z is not common under QCAD as it is 2D.
Regards, CVH
|
|
2506 | QCAD/CAM | Feature Request | Low | Include arc segmentation for 'milling' On-Path. | Assigned | |
3 |
Task Description
Related forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=10468
For ‘milling’ on path it doesn’t consider
this.arcInterpolation = true
in the custom postprocessor nor the checked option in the CAM Configuration Dialog.
As far as detected the CamArcInterpolation checkbox of the CAM Configuration Dialog is unrelated to the this.arcInterpolation in the postprocessor.
Regards, CVH
|
|
2418 | QCAD/CAM | Feature Request | Low | Include a GroupCustom widget in CAM Toolpath dialogs. | Assigned | |
2 |
Task Description
Andrew,
Unrelated to OS or QCAD version.
In the postprocessor configuration dialog there is a group box called ‘GroupCustom’. One can add custom widgets to that, rename it and so on.
Such is not provided in CamProfileToolpathDialog.ui or CamDrillToolpathDialog.ui
It should be possible but we aren’t really able to mix up things with the ‘Message’ QLabel ... A reserved QGroupBox would do the trick.
Related topic: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9647
Regards, CVH
|
|
645 | QCAD (main) | Bug Report | Low | Inch - Layerdata / Linewight still in mm ... | Assigned | |
|
Task Description
Drawing Unit is in “Inch” but the Layer Data (Line wight) is in “mm” ....
I like it ... but maybe I’m the only one
|
|
628 | QCAD (main) | Feature Request | Low | Improve workflow for entering tool parameters | Assigned | |
|
Task Description
Provide keyboard shortcuts for options tool bar.
Under Linux, Windows Alt+Key shortcuts can be used. Mac OS X does not seem to support this.
See also suggestions at: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2053&view=unread#unread
|
|
1323 | QCAD (main) | Suggestion | Low | Improve command line support in QCAD | Assigned | |
|
Task Description
Hi,
As a typical command line draftsman (still using acad10 for dos, since microsoft doesn’t supoort Win NT anymore), I noticed a severe lack on command line acces in QCAD.
For example I find the icon and pixel selecting methods within qcad very confusing and rude.
With the normal cad Select command I can select exactly what en how I want it.
I intend not to be rude, but I find my drawing screen littered all over with all kind of very specialist menu’s, tools and options. Sorry, I just want to make a drawing at the natural intuitive way, as with a pencil. So I use command line Commands, such as Move, Copy, Change, Select, a.s.o. For a ‘Command scripting’ user (-batching is a different tool!-), it seems to me logical these basic commands should be accessable.
|
|
1185 | QCAD (main) | Feature Request | Low | Importing Tables (CSV) | Assigned | |
2 |
Task Description
Import tables in CSV format and display them in the drawing as lines and text.
|
|
2428 | QCAD (main) | Feature Request | Low | Implement reversing Leader entities on creation or afte... | Assigned | |
1 |
Task Description
Andrew,
Usually I point to something to start with. Sometimes I want to point away from here but then the arrow is where I just clicked.
An option on creation would be nice. The capability to reverse the Leader orientation afterwards is another method to get it pointing the intended way.
A Leader entity is stored similar as a polyline. I think it would not be difficult to reverse the basic polyline and update the dimension shape accordingly.
Regards, CVH
|
|
1203 | dxflib | Bug Report | Low | Images not saved (dxflib) | Assigned | |
|
Task Description
I am doing a bit of landscaping and using a (big) ortophoto as one of my layers in order to sanity-check on the ground measurements.
The layer contains a point and the image and nothing else.
The image is a 8MB file: “PNG image data, 4200 x 2980, 8-bit/color RGB, non-interlaced” and it is scaled to 210 coordinate units (meter) horizontally in the drawing.
With approx 50% probability the image disappears during Save, as see for instance in this diff of the DXF file:
@@ -158699,28 +153057,6 @@ AcDbXrecord
90
6
0
-IMAGEDEF
- 5
-A1
-100
-AcDbRasterImageDef
- 90
-0
- 1
-/critter/HTV10/Ortofoto/ortofoto201502f.png
- 10
-210.0
- 20
-149.0
- 11
-1.0
- 21
-1.0
-280
-1
-281
-0
- 0
ENDSEC
0
EOF
The point in the same layer does not similarly disappear, the bug only seems to affect images.
I have seen this bug from version 3.7.5.0 to git as of yesterday (63e06c778926a803bdfbffdf27b8c24d41511072).
I have not been able to correlate the bug with anything.
Looking closer at the DXF file (attached), there seems to be some residuce of attempts to insert images in protected/invisible layers, so this may be some kind of refcounting issue.
(Any chance of getting FreeBSD into the “Operating System” field ?)
|
|
1844 | QCAD/CAM | Feature Request | Low | HP/GL (PLT) import | Assigned | |
|
Task Description
Hi Andrew
QCAD/CAM misses a hpgl.plt import. If gerber and G-code can, so should plt.
|
|
763 | QCAD (main) | Feature Request | Low | Hatching with just one click | Assigned | |
10 |
Task Description
My task: To hatch an area.
Right now, if I want to fill an area with a hatch pattern, I have to select all the enclosing objects (lines, arcs) and then I can select the hatch tool. That can be under some circumstances a tedious task. To illustrate this, I created a simple example (see Attachment 1: Hatching.png).
Step 1: Create a rectangle. Step 2: Draw four vertical lines. Step 3: Select the four lines surrounding the first area. –> Problem! The horizontal lines are too long. Step 4: Divide the long horizontal lines of the rectangle where the vertical lines touch. Now the lines surrounding the three areas can be selected. Step 5: Hatch the selection. Done.
Just for fun try recreating my second example (see Attachment 2: Hatching2.png)
Therefore I would like to suggest a far more simple approach.
Step 1: Select the Hatch Tool. Step 2: Click inside the area you would like to be hatched. Done.
Of course that would mean that the hatch style is already pre-defined and can be changed later, if needed.
In this way productivity can be increased by ... [fill in you own estimate] ... times.
Example 2 would need only 13 clicks to hatch all the areas (including the hatch tool button).
|
|
2264 | QCAD (main) | Bug Report | Low | Hatching segment selection stops at entity - hatch patt... | Assigned | |
1 |
Task Description
QCAD Professional Windows7 pro WinInstaller Version: 3.26.4.5 (3.26.4.5) Internet: QCAD.org Build Date: Jul 20 2021 Revision: e596276 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
In the example given by ‘turtle’ .. why_is_this_not_closed-v2.dxf https://www.qcad.org/rsforum/viewtopic.php?f=32&p=34157#p34153
Selecting hatch boundary segments of the horizontal polyline segment at (1169.933593;274.432562)-(1089.933593;274.432562)
Segment selection stops where the AR-CONC hatch pattern touches the horizontal segment. Such intersections points where already no longer regarded as snappoints. See :
FS#2090 : https://www.qcad.org/bugtracker/index.php?do=details&task_id=2090. Related topic https://www.qcad.org/rsforum/viewtopic.php?&t=7340&p=28414#p28414
Regards, CVH
|
|
1972 | QCAD (main) | Bug Report | Low | Hatch import fails for boundaries with many very small ... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6648
|
|
787 | QCAD (main) | Feature Request | Low | Hatch generator - plug in tool? | Assigned | |
|
Task Description
Would it be possible to make a Plug in tool for a Hatch generator, so custom made hatches can be saved as .pat files?
I have a lot of up and coming future projects that I would like to make my own ‘custom’ hatches for.
|
|
2440 | QCAD (main) | Bug Report | Very Low | Hatch from Segments > False positives open loop warning... | Assigned | |
1 |
Task Description
Andrew,
Most probably not related to OS or QCAD version.
When hatching an area with Hatch from Segments (HS) there might be false positive warnings on open loops. It seems that this is related to the orientation of the indicated segments and the order of selection. The real problematic position is not always the first that is reported. Loop count is increased even if it is a single loop.
Included a basic test drawing to replicate these. Further details to replicate the issue are in the file.
Regards, CVH
|
|
1826 | QCAD (main) | Feature Request | Low | guide lines when extending lines | Assigned | |
|
Task Description
When using the SHIFT key while dragging the end point a perpendicular guide line is displayed (see attached screenshot). It would be very helpful if other guide lines with x=const. and y= const. are displayed when pressing SHIFT + ALT key together while dragging.
|
|
839 | QCAD (main) | Feature Request | Low | Grid / Meta Grid info + Drawing Unit Info ... | Assigned | |
1 |
Task Description
At our QCAD Drawing window, below right corner, we have the Info displayed what are the Grid / Meta Grid settings. It would be nice to have additional the Info for the drawing unit ...
|
|
1112 | QCAD (main) | Feature Request | Low | Gradients | Assigned | |
5 |
Task Description
I would very much like to ask for the option to Hatch/Fill with a gradient of one or two colours.
Many Thanks
Clive
|
|
1772 | QCAD (main) | Feature Request | Low | Go back on right-click on shaded Tool button | Assigned | |
|
Task Description
Right-click on the tools on the left-hand side of the screen brings you back in the hierarchy.
However, that does not work if you right-click while hovering above a button that that is shaded (inactive).
|
|
2557 | QCAD/CAM | Suggestion | Very Low | G20/21 not occuring in generic postprocessors | Assigned | |
|
Task Description
Andrew,
I know that GCodeMM.js and GCodeIN.js are generic postprocessors. Mostly used as base for other or custom postprocessor.
The distinct nature is pretty clear from the filename and the suffix in the display name. Another distinct nature is that they include this.unit = RS.Millimeter / RS.Inch intended for the CAM side.
Why don’t they include at least a G20/21 in a generic header?
There are several more specific postprocessors where I miss these G-codes for the measurement system.
True, if they are not supported, no error messages would occur when omitted. The danger is that users rely on build in postprocessors hoping that it matches with the default measurement system of their setup.
IMHO it is safer to trigger an instruction fault before attempting to execute a wrong motion. As fail-save as possible should always be the goal.
Regards, CVH
|
|
927 | QCAD (main) | Feature Request | Low | Further options for the 'Add Measurement' tools | Assigned | |
2 |
Task Description
Absolutely love the new options for adding the measurements in the current drawing.
I would like to see an additional option for only adding the text and not the lines also, maybe a simple check box would suffice here.
Of course at the moment I am able to use the property editor to select only the lines and move to a new layer and hide!
|