|
2160 | QCAD (main) | Bug Report | Low | Draw > Polyline > Relocate Start Point: fails on polyli... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Origin: I like to start my CAM paths at low curvature instead starting at high curvature. Ellipses may explode with the startpoint at the tip. (file Y2)
Documented in 3.25.2.4, reproducible under 3.25.2.7
File included with 4 LayerStates - Original Ellipses: Y1 - Exploded to polylines (32 segments): Y2 - Direct after XP, OR performs different on the left top one: Y3 - Faulty solutions by OR: Y4 (= saved state)
The results may differ with the saved explosions.
With the file. Y1 TA XP Relocate startpoint with OR to an existing reference (called ‘End’)
Regards, CVH
|
|
1702 | QCAD (main) | Feature Request | Low | Draw > Polyline: add boolean operations | Assigned | |
1 |
Task Description
Add intersection, union, difference, XOR operations for closed polylines.
|
|
1298 | QCAD (main) | Feature Request | Low | Drawing Preference; File format | Assigned | |
1 |
Task Description
Hi, I get anoyed everytime saving a drawing;
File Format not recommended....... [Yes] ; I know. it's suppose to be in that format!
Saving to file...... [OK] ; I already told you
Black entities ......bla bla [OK] ; I already told you
Custom colors ...... bla bla [OK] ; I already told you
Therefore, Drawing Preferences should start with the file format choice field;
File Format: R.......
Drawing should be opened and saved in that format without any question. Please.
|
|
1911 | QCAD/CAM | Feature Request | Low | Drill Toolpath | Assigned | |
|
Task Description
Hallo Andrew
It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.
|
|
2300 | QCAD (main) | Feature Request | Low | Duplicate layout blocks with contents | Assigned | |
2 |
Task Description
Add a tool to duplicate a layout block with contents.
|
|
2325 | QCAD (main) | Bug Report | Low | dwg file crashes QCAD | Assigned | |
|
Task Description
Regarding to forum post: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8982&p=35836#p35836
dwg loaded in 3.27.1 frees QCAD (no response) and a Win10 PC. Same drawing loaded in 3.26.0 causes no problems. It looks to me that two hatches (handle 198b6, 198ba) are the culprits. Drawing saved without those hatches opens without any problem in 3.27.1.
TECNOFLEX symbol library.dwg = original file from forum post TECNOFLEX symbol library_mod.dwg = my modification
|
|
2462 | QCAD (main) | Bug Report | Low | DWG import issue: m^2 gets weird "\A1" | Assigned | |
|
Task Description
I’ve opened an existing, old dwg file in the Professional Trial edition, file(1) says it’s “DWG AutoDesk AutoCAD 2004/2005/2006”. It contains (among other stuff) a floor plan with areas in m^2. A PDF export (from the original software used at the time, probably autocad) shows that this was displayed correctly. However, in QCAD, I get a “\A1” and a very small number 2 instead. I’ll attach screenshots.
|
|
1824 | dwg2pdf | Feature Request | Low | dwg2pdf does not obey frozen layers in paper-space view... | Assigned | |
|
Task Description
We currently have a paper-space using two viewports with different layers from the model-space frozen. Unfortunately in the pdf output the layers which are frozen show up. dwg2pdf should obey the specific frozen layer for each viewport
|
|
1700 | dwg2pdf | Feature Request | Low | dwg2pdf: output multiple layouts | Assigned | |
|
Task Description
Add support to specify multiple blocks (layouts) to output (one per page).
|
|
1542 | dwg2svg | Feature Request | Low | dwg2svg: add switch to show only given layer(s) | Assigned | |
|
Task Description
Implement a command line switch to only show a list of given layers for dwg2* command line tools.
|
|
1008 | QCAD (main) | Bug Report | Low | DXF (dxflib) compat issues | Assigned | |
|
Task Description
Git head as well as 3.4.5 (trial), both with dxflib 3.3.4.0.
Start up QCAD, (with existing or new configuration, doesn’t seem to matter), “Save as” the completely empty drawing, choose “R15 (dxflib)” on Pro (only this one is available on community), save drawing.
Fire up AutoCAD 2000, try to load the empty drawing just saved.
Result:
DXF read error
Error in APPID Table
DXF read error on line 941.
Invalid or incomplete DXF input -- drawing discarded.
Problem not present when a completely empty drawing saved using Teigha in R15 format is opened (ie. it just results in an empty drawing in AutoCAD 2000). Problem is also not present when saving an existing drawing with Pro (trial) with Teigha and opening it in AutoCAD 2000. Problem does present when trying to open a dxflib-saved drawing in AutoCAD 2000.
Empty drawings created with both dxflib 3.3.4.0 in QCAD Pro 3.4.5 trial and Teigha whatever in QCAD Pro trial 3.4.5 are attached. (Community Git 135fd0 is identical to Pro - same dxflib version.)
|
|
976 | dxflib | Bug Report | Low | DXF import errors related to hatches, texts | Assigned | |
|
Task Description
See: http://www.qcad.org/rsforum/posting.php?mode=reply&f=30&t=2677
|
|
747 | QCAD (main) | Feature Request | Low | DXF import: dimension label | Assigned | |
|
Task Description
Add support for custom dimension labels created in 3rd party applications. Such labels may contain text that is stripped by QCAD.
|
|
1586 | QCAD (main) | Feature Request | Low | Edit > Application Preferences: Use different color for... | Assigned | |
|
Task Description
Add preference to use a single, configurable color for all locked layers.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4879#p17953
|
|
1489 | QCAD (main) | Feature Request | Low | Edit > Drawing Preferences > Dimensions: Add option to ... | Assigned | |
2 |
Task Description
It would be extreamly useful to have an option to either use - or not use leader lines in the standard horizontal/vertical dimension line tools, some of the drawings I’m working on need the ‘standard’ looking dimensions with leader lines and some don’t. its a real pain to have to select - explode and delete all the leaders I don’t need.
Hoping for an option
Regards
Clive
|
|
1093 | QCAD (main) | Feature Request | Low | Edit Layer attributes by double-clicking on entry in la... | Assigned | |
2 |
Task Description
When double clicking on an entry in the layer list just nothing happens. I would prefer if this would directly open the layer attributes dialog to change color/name etc.
|
|
798 | QCAD (main) | Feature Request | Low | elaborate on purge tool | Assigned | |
1 |
Task Description
Modify the “purge layer” tool to preserve empty layers with a locked status. see: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2386
|
|
1976 | QCAD (main) | Feature Request | Low | Envelope at offset to a poly tool | Assigned | |
1 |
Task Description
See: https://www.qcad.org/rsforum/viewtopic.php?t=6650
|
|
2398 | QCAD (main) | Feature Request | Low | Excessive Autosave | Assigned | |
|
Task Description
Autosave currently updates the backup file indefinitely regardless of whether the drawing has been modified since the last autosave. Request only update autosave following additional edits since last autosave.
|
|
173 | QCAD (main) | Feature Request | Low | explode text to letters | Assigned | |
1 |
Task Description
implement
|
|
2378 | dwg2svg | Feature Request | Low | Export attributes on block references as namespaced XML... | Assigned | |
|
Task Description
dwg2svg supports exporting the layer name (and probably others?) as namespaced XML attributes (`qs:layer`) which works well. However I’d like to export block attributes as well, as seen on the following screenshot:
https://imgur.com/a/wUd0adE
(...so `ROOM_NAME` would become `qs:ROOM_NAME=”Eötvös terem”` on the respective XML element).
Thanks in advance.
|
|
1555 | QCAD (main) | Feature Request | Low | Export list of points. | Assigned | |
1 |
Task Description
Hello It would be great when you can add a function to export a selected object as a list of points. Is it possible to add?
Autodes DWG TrueView 2017 has this function and it is very useful. Here you can see a screenshot of this function.
|
|
1090 | QCAD (main) | Feature Request | Low | Export only selected layers to SVG and/or export each l... | Assigned | |
2 |
Task Description
When exporting to SVG it would be helpful if there was a selection of layers to export. E.g. when selecting only layer A in the SVG export dialog, only the objects located/displayed on layer A would be exported to SVG.
As an alternative or additional export feature, there could be an option to export each (non-empty) layer to a separate SVG in one step. The layer names could be used as (part of the) default file names during the export. E.g. Layer A of file XYZ would be exported to “XYZ_A.SVG” while layer B would be exported to “XYZ_B.SVG” etc.
|
|
1526 | QCAD (main) | Suggestion | Low | Exporting block attributes to CSV | Assigned | |
1 |
Task Description
Two useful commands make it necessary to
1-”delete all the history of the command lines without terminating QCad” ; and
2-”export attributes to the CSV file as exported to the Blocks List”
|
|
2191 | QCAD (main) | Feature Request | Low | Extend the functionality of the Reorder tool | Assigned | |
3 |
Task Description
Add functions to the Reorder tool, similar to the functions of the counter tool, undo last step and start at any number, allowing corrections and restarting the tool part way through.
See the discussions at https://qcad.org/rsforum/viewtopic.php?f=32&t=8170
|
|
2446 | QCAD (main) | Feature Request | Low | Extending dimension line beyond extension line when usi... | Assigned | |
1 |
Task Description
I would like the ability to extend dimension lines beyond the extension line when using tick marks. Images are attached and posted here: https://qcad.org/rsforum/viewtopic.php?f=31&t=9785
|
|
776 | QCAD (main) | Feature Request | Low | Extra ' isometric' buttons for using Line from Angle. | Assigned | |
2 |
Task Description
When working with the isometric grid (in any projection - Top, Right, Left) and drawing from ‘scratch’ as it were, without using the projection tools - I find myself using ‘Line from Angle’ the most.
It would be extreamly useful to be presented with two extra buttons when using this tool, a 30 degree button and a -30 degree button, this way I wouldn’t need to keep typing in the angle difference here.
Regards
Clive
|
|
951 | QCAD (main) | Feature Request | Low | Extra Option for Block attributes ... | Assigned | |
1 |
Task Description
It would be nice to have the possibility to control the automatic Text orientation in Block attributes. Something what would work like the DIM restriction: I can read the text horizontal and/or from the right side of the drawing sheet.
Right now I have the feeling that the Text orientation is dependent on the tool what I even use. Different tools = different outcomes.
|
|
788 | QCAD (main) | Feature Request | Low | Extra option to detect duplicates only in user defined ... | Assigned | |
2 |
Task Description
It would be very useful to have an extra option to only detect duplicates within a user defined area.
|
|
467 | QCAD (main) | Feature Request | Low | Feature request for new Arc tool option to add to Arc s... | Assigned | |
2 |
Task Description
For and behalf of mandrena
To add another Arc tool option in Arc tools set:
1.Specify Start point for Arc. 2.Specify End point for Arc. 3.Specify “Tangent” direction (without being restricted in input field) so you can visually select a point on your desired Tangent line!
|
|
638 | QCAD (main) | Feature Request | Low | Feature request- text find/replace function | Assigned | |
2 |
Task Description
Feature request- text string find/replace
Scope: entire drawing/selected objects set/chosenlayer only
Functionality:
‘find’ with ‘zoom to’, first, next, previous, last
‘replace’ with ‘next’, ‘undo’, ‘all’
This functionality is very useful when using QCad for system diagrams and the like.
|
|
1663 | QCAD (main) | Feature Request | Low | Feature Request: Export Layers as New Drawing | Assigned | |
2 |
Task Description
Hi!
in many tasks in qcad I ended up exporting one or several layers into individual files for some cnc jobs or further processing. So the steps I usually do are:
select all elements on the layer
paste into new drawing
sometimes rename layer names or attributes
adjust dimension settings
save and give name for drawing
Sometimes I have up to 100 layers I need to export like this, so an automatic export for all would be time saving too. But very often a “single click” export method would also help a lot. (e.g. inside the layer list an entry in the right click menue like “save as new file”). Also a multiple selection would be handy if more that one layer should end up in the new file. (e.g. select the three layers that need to be in the new document, then right click and save as new file). Maybe this is too much of changes needed inside the layer list - so something like a separate layer export dialogue would make sense.
When exporting many layers some variables for automatic naming of layers and filename would make sense e.g. user can specify basename_%L.dxf to get the basename_layername.dxf or just an increasing number.
For layers and attributes it is often needed to give a layer a certain name or color for different cnc processes (e.g. engraving and cutting for lasers) or to put everything on layer “0” because of some old CAM software that only supports content on layer 0.
probably many more details would make sense that I didn’t think of yet...
kind regards Martin
|
|
1471 | QCAD (main) | Feature Request | Low | File > Open file location | Assigned | |
2 |
Task Description
When working with several files is normal also to work in several folders, this can be confusing, expecially in the case where there are different folders with equal file names. I propose the creation of a “Open file location”. This, probably under the main menu, “File”, when clicked would open the standard “file explorer” with the folder that contains the current file already selected. It would be quite similar to the windows 8/10 “Open file location”.
|
|
2483 | QCAD (main) | Bug Report | Low | File > Open: MLeaders with text not imported | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10159
|
|
1230 | QCAD (main) | Feature Request | Low | File > PDF Export / SVG Export: export layers | Assigned | |
|
Task Description
Dear Andrew, just in case you should ever run out of ideas for enhancements; As an advisor I sometimes get PDF files and recently, some CAD drawings contained layers, which is kind of nifty to reduce the clutter.
Sadly though, qprinter/qpainter seem to be unaware of OCG (Optional Content Groups, the PDF jargon for layers) at the moment, so my plea is for the back burner now. Probably in SVG though it can be done? Yet that is of a little less use, maybe…
|
|
1332 | QCAD (main) | Feature Request | Low | File > SVG Export: export DXF entity handles to SVG | Assigned | |
|
Task Description
Add handle attribute to exported SVG tags to identify exported DXF entities.
|
|
586 | QCAD (main) | Feature Request | Low | File open dialog with preview | Assigned | |
1 |
Task Description
Since this is not supported by Qt anymore, this would likely have to be implemented from scratch.
|
|
2351 | QCAD (main) | Feature Request | Low | File Thumbnail Preview | Assigned | |
1 |
Task Description
Could we please implement the ability to display file contents in the file explorer. This would make it easier to decide which files to open.
|
|
1067 | QCAD (main) | Feature Request | Low | Filling an area with a bitmap | Assigned | |
1 |
Task Description
Being able to fill an area with a bitmap would be a nice addition to the already impressive feature list of QCAD.
|
|
2391 | QCAD Community Edition | Bug Report | Low | Fix Dark Theme for Linux | Assigned | |
|
Task Description
The dark theme for Linux is broken:
- Some icons have dark background (expected) and black foreground color (that should be replaced by white of very light gray) - Some icons have light background (not cohesive with the theme). - The command history shows dark blue font on dark gray background. - The grid’s ruler shows black font over dark background for the numbers. - The icons folder is missing in the GitHub repository, but other themes have that folder. - The general icons (open, save, and so on) are not dark theme friendly. A better approach for maybe all the themes would be to use something like the breeze icons pack for LibreOffice, and it will have the added benefit of making the app look more modern.
The icons issue is the biggest problem. They should probably replace the black color for white or very light gray. Even the red accent color is not ideal for dark themes, is not the main issue.
Attached is an image that show the problems and another that shows LibreOffice with the Dark Breeze theme for reference.
|
|
2450 | QCAD (main) | Bug Report | Low | Flip Block with Attributes horizontaly fails | Assigned | |
|
Task Description
A block with Attributes can’t be flipped (Option bar) horizontally. The Attributes will be rotated 180° instead of been mirrored. Other entities in the block flip correctly. Same block flipped vertically works as expected (Mirrored Attributes). Same block flipped with FH or MI works as expected. (Mirrored Attributes).
|
|
2014 | QCAD (main) | Bug Report | Low | Focus on Options Toolbar fails | Assigned | |
|
Task Description
Scenario: e.g. Tools Move/Copy and Rotate switched to “use without dialog.
Launch within a drawing Move/Copy, use the Keyboard keys CTRL + Space to focus on the Option Bar - the field for Numbers is Highlighted and I can change it. Further navigation with keys on the keyboard depends on remembered option (copy yes/no etc what make a navigation possible or not. It looks like the navigation with the Arrow keys is focused on the canvas and sooner or later the courser will jump to the Command Line or Property editor. Same behavior with the Rotation tool.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6828
|
|
2252 | QCAD (main) | Bug Report | Low | Freeze / crash when selecting clamped splines (not crea... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8531
|
|
601 | QCAD (main) | Feature Request | Low | Für Berechnungen neu zu erstellende Elemente Werte von ... | Assigned | |
|
Task Description
Es wäre schön wenn ich Werte wie zum Beispiel Längen von Linien direkt abgreifen könnte um diese weiter in Berechnungen verwenden zu können.
Beispiel: Ich habe eine Linie konstruiert wobei sich eine Länge y ergeben hat.
Nun möchte ich eine Linie zeichnen die 5 mal y sein soll.
Linientool → Wert 5* eingeben und y durch Auswahl mit der Maus von dem vorhandenen Elements übernehmen.
Natürlich könnte ich die Geometrie Info benutzen um den Wert abzulesen oder auch über die Zwischenablage zu benutzen. Ein abgreifen mit der Maus wäre aber schneller, direkter und wahrscheinlich auch mit weniger Fehlern (Human error) verbunden. Wahrscheinlich auch genauer da QCad, denke ich, mit mehr Nachkommastellen rechnet, oder?
|
|
927 | QCAD (main) | Feature Request | Low | Further options for the 'Add Measurement' tools | Assigned | |
2 |
Task Description
Absolutely love the new options for adding the measurements in the current drawing.
I would like to see an additional option for only adding the text and not the lines also, maybe a simple check box would suffice here.
Of course at the moment I am able to use the property editor to select only the lines and move to a new layer and hide!
|
|
1772 | QCAD (main) | Feature Request | Low | Go back on right-click on shaded Tool button | Assigned | |
|
Task Description
Right-click on the tools on the left-hand side of the screen brings you back in the hierarchy.
However, that does not work if you right-click while hovering above a button that that is shaded (inactive).
|
|
1112 | QCAD (main) | Feature Request | Low | Gradients | Assigned | |
4 |
Task Description
I would very much like to ask for the option to Hatch/Fill with a gradient of one or two colours.
Many Thanks
Clive
|
|
839 | QCAD (main) | Feature Request | Low | Grid / Meta Grid info + Drawing Unit Info ... | Assigned | |
1 |
Task Description
At our QCAD Drawing window, below right corner, we have the Info displayed what are the Grid / Meta Grid settings. It would be nice to have additional the Info for the drawing unit ...
|
|
1826 | QCAD (main) | Feature Request | Low | guide lines when extending lines | Assigned | |
|
Task Description
When using the SHIFT key while dragging the end point a perpendicular guide line is displayed (see attached screenshot). It would be very helpful if other guide lines with x=const. and y= const. are displayed when pressing SHIFT + ALT key together while dragging.
|
|
787 | QCAD (main) | Feature Request | Low | Hatch generator - plug in tool? | Assigned | |
|
Task Description
Would it be possible to make a Plug in tool for a Hatch generator, so custom made hatches can be saved as .pat files?
I have a lot of up and coming future projects that I would like to make my own ‘custom’ hatches for.
|