QCAD Bugtracker

Hallo Andrew,

testing the drill toolpath I used single point markers.

In 3D simulation the tool drills the toolpath AND uses the drill as a mill.

Cam Export and generated G-code is not effected.

To reproduce

Actual

Expected

Workaround

Hallo Andrew,

Found a bug in the 3D Simulator execution

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6648

Yesterday I set up a Windows 64 bit install of QCAD Pro which shows the same bug I have been seeing for a while in the Community linux git repo.

Create a new drawing and then go to “Print preview”. Enable “Move paper postion”, the cursor changes to the hand icon, but the paper position is unable to be moved. Only by saving the drawing, exiting the program, restarting and reopening the drawing, will the “Move paper postion” function correctly.

Affected versions tested:

Windows 64bit installer download, as of yesterday.
Linux 64bit build from git, about 20minutes ago.

For what it’s worth, this bug is not present in this previous git checkout:

Version:
3.21.1.0 (3.21.1)
Internet:
QCAD.org
Build Date:
Jul 2 2018
Revision:

Qt Version:
5.7.0
Architecture:
x86_64
Compiler:
gcc 6.3.1

Thanks for a great product.

Scenario: e.g. Tools Move/Copy and Rotate switched to “use without dialog.

Launch within a drawing Move/Copy, use the Keyboard keys CTRL + Space to focus on the Option Bar - the field for Numbers is Highlighted and I can change it. Further navigation with keys on the keyboard depends on remembered option (copy yes/no etc what make a navigation possible or not. It looks like the navigation with the Arrow keys is focused on the canvas and sooner or later the courser will jump to the Command Line or Property editor. Same behavior with the Rotation tool.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6828

In my example I can’t draw a circle with circletangent2 if the defining point is on one of the defining tangents. The tangency is lost when I try to do this.

I attached 4 screenshots: TheExample.png, TryingPoint1.png, TryingPoint2.png and The_Point_Isn’t_On_The_Tangents.png.

QCAD 3.24.2 / macOS x86_64 10.14.6

Starting with empty doc:
1. Draw any object (e.g. a rectangle) on layer 0.
2. Create new layer (”1”) with color, say yellow.
3. Select new layer
4. Select new object
5. Modify → Move / Copy
6. Click reference point
7. Click target point same as reference point
8. In “Move / Copy Options” dialog, select “Delete Original” and check “Use current layer and attributes.” Click OK.

The moved object stays on the layer it was previously on. Using “Move / Copy” as a quick way to move a selection between layers is not useful even though it appears to be the recommended way in a Google search.

Note: if “Keep Original” is selected instead, the copied object is placed on the current layer and the original object remains on its layer, as expected.

Note: if the target point is different from the reference point, the moved object is placed on the current layer as expected.

There are other workarounds too, cut / paste with “To current layer” checked seems to work, as does chaging the layer in the Properties Editor.

How to reproduce.

1. Create a text field with some non-english words in the upper index. (see attached pic1.png)
2. Save the project and close QCAD.
3. Run QCAD and open same project.
4. Now upper/lower indexed text becomes not human readable UTF codes. (see attached pic2.png)

Tried different fonts - doesn’t help.

Linux ntb-kirill 3.10.0-1062.12.1.el7.x86_64 #1 SMP Tue Feb 4 23:02:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
CentOS Linux release 7.7.1908 (Core)

Open QCAD and the application preferences. In the section “General: tool settings " you can resize the columns: Menu, Shortcuts etc.
The problem is that it is not intuitive. The first divider is not selectable and the second moves the first, only backwards.

The application crashes when I try to change a shortcut in the preferences. And only after resizing the preferences window.
In the attachement are the cli warnings.
I also tried the 3.24.3.9 snapshot with the same result.

With default autosnap settings reference points included I find it very hard to snap to the baseline reference points of a dimension.
I manage to do it by setting snap to reference point only and zoom out till I see the entire dimension element.

The square symbol offered as symbol in DIM label is the only symbol which doesn’t adopt the layer color.
If I print a drawing in full color it leads to a black symbol in an otherwise colored dimension.

It is also the only symbol which has a solid filling what is confusing when you work with it in Model_Space ...

When I zoom, the text disappears in certain zoom levels after updating to the latest version.

When placing a hole at x0 y0 there is no G00 x0 y0 in the exported G-Code.
So the first cut was made at the current position of the tool, not at x0 y0!

QCAD Professional
Windows 7, Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Issues most likely unrelated to OS and installations before 3.25.
Related post:
https://qcad.org/rsforum/viewtopic.php?&t=7982

Flaws documented in full in attached dxf.
The dxf has meaningful Layer States.

4 Columns:
- Prior Art
- The test cases
- Actual results
- Results with proposed fix

Tried as many things as I can come up with.
Orange: Flaws
Red: Errors
Green: Good results (or as good as I can get them)

Solution(s) given in attached script explode.js
(I am just a simple guy and wouldn’t know how to file a pull request on GitHub ......)

In section: “explode polyline into line and arc segments”
group: “if (RPolyline.hasProxy() && polyline.hasWidths()) {....}”
All additions, updates & typos are marked with “CVH”, one can textual search for it.
Over-documented for sure.
Any Eaction is to debug in Windows and is obsolete.

Included PreferencesPage.ui is updated for the all Splines from Text fix
Still in consideration: Forcing cubic splines from text to degree 2 ...
... I am rather convinced ...

CVH

In the Application Preferences>Draw>Text dialog, when first opened, the Uncheck all and Check all buttons are not disabled if the Show font preview in font controls check box is checked. If you click on the Use reduced selection of fonts check box twice the buttons become disabled.

QCAD Professional
Windows 7; Win installer 32 bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Forum Topic: https://qcad.org/rsforum/viewtopic.php?t=7988
File included.
I have no intention to make 48 separate reports.

CVH

QCAD Pro 3.25.2.7 Win7 Wininstaller 32bit
Related Topic:
https://www.qcad.org/rsforum/viewtopic.php?&t=7954

Reported is that black is saved as #00004c (dark blue)
Radek (iMac (Retina 5K, 27-inch, 2017), Catalina 10.15.7 (19H114)

My system/installation saves black as #4c000 (dark red)

When using single primary colors these get reduced to #4c, #7f, #99, #cc & #ff.
The threshold for that are #00, #65, #8b, #b2 & #e5
See: DimColorScale (png & dxf)

8 standard CAD colors fail saving correct
Black (something with #4c)
Dark Red, Dark Green, Dark Blue, Dark Cyan, Dark Magenta, Dark Yellow
(#80 turns #7f)
& Gray
(#adadad instead of #a0a0a4)

As with Gray, when mixing the 3 colors it gets rather fuzzy ...
#505050 & #555555 both turn #5b5b5b
&
#464646 turns #4c4226

A snippet of my investigation is included in the topic
(45 files in a ZIP)

CVH

Support for external references (XREF)

UCS support.

My task: To hatch an area.

Right now, if I want to fill an area with a hatch pattern, I have to select all the enclosing objects (lines, arcs) and then I can select the hatch tool. That can be under some circumstances a tedious task.
To illustrate this, I created a simple example (see Attachment 1: Hatching.png).

Step 1: Create a rectangle.
Step 2: Draw four vertical lines.
Step 3: Select the four lines surrounding the first area. –> Problem! The horizontal lines are too long.
Step 4: Divide the long horizontal lines of the rectangle where the vertical lines touch. Now the lines surrounding the three areas can be selected.
Step 5: Hatch the selection. Done.

Just for fun try recreating my second example (see Attachment 2: Hatching2.png)

Therefore I would like to suggest a far more simple approach.

Step 1: Select the Hatch Tool.
Step 2: Click inside the area you would like to be hatched. Done.

Of course that would mean that the hatch style is already pre-defined and can be changed later, if needed.

In this way productivity can be increased by ... [fill in you own estimate] ... times.

Example 2 would need only 13 clicks to hatch all the areas (including the hatch tool button).

It would be a nice feature to be able to select multiple layers to remove them all at once.

It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.

Add support to draw revision clouds or convert polylines, ellipses, circles to revision clouds.

Hi,

from time to time I need to place a circle etc precisely between two entity’s - what is a lot of construction work to get it correct. With the new “Info tool “Distance Entity to Entity” we have already the base for a new snap tool which could help to get rid of the time consuming construction process in cases like this. I would appreciate to get a new snap tool which is able to figure out the shortest distance between to entity’s and then will snap to the middle of it.

Pic 1: Given situation
Pic 2: Result after using this new snap tool

Would it make also cense to have a second new snap tool which works opposite for the furthermost distance between two entity’s?

Add a tool to detect overlapping segments or lines and arcs.
Similar like the “overkill” command in other CAD systems.

Use case:

• Start tool
• Choose one entity of the contour
• If contour is closed, area of closed contour is calculated an printed in the command line history
• Configuration parameters: segment length for arc interpolation

A new tool to create Spirals would be great to have, with an option to restrict the decline to achieve to draw either Logarithmic or Linear styles.

Please see related topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3236

This one is a really important one for me, as currently I am doing a lot of dimension and annotation drawings.
I would like to request an option to be added to the dimension settings for both drawing and application settings to be able to choose whether the dimension text is to the right or left side or over the top or underneath the dimension line.
This would help tremendously when a lot of dimensions are needed!

Regards

Clive

Hi Andrew,

I’m not sure whether this has been added or suggested already. It would be great to have a built in QCAD table tool for producing cutting lists or bill of materials etc. A dedicated table tool would be a real boost to QCAD Pro ;)

Many thanks

Clive

In a medium complex drawing it’s often too much details to have all layers in a drawing visible at once. Also, it is of great importance to be able to have a single model to avoid duplication of work and risk inconsistency.

So i would like to create a number of views where each view has selected layers visible (that makes sense for the purpose of the view) and then assign the views to different layout blocks (using view-ports) in paper-space to be able to setup printing of several views on the same page/PDF

This also means that view-ports would have to be aware of what view they are displaying (if any besides the standard-view).
This will then make it possible for printouts of different views with selected layers visible (different for each view and view-port) and still have only one model. Today this is not possible.

As it is today the only limited workaround is to set the layers you want to display, print/PDF of that viewport on separate page, and then change it for the next page, and so on. The big drawback is that you cannot have two different views/view-ports on the same page with different layers visible. Also, for large drawing it is painful to have to do a lot of manual setup for each rendering of the complete drawing.

Insert field into drawing that displays current date, file name, ...

It would be nice to implement the old hatch function as a tile function in parallel with the newer more industry standard hatch function. A tile function that would allow overlap +/- would be even better, and a great productivity boost, almost like an array within a set of bounds.

Thanks, Bob

It would be nice to have an extra option for the Align tool what provides the possibility to an equal distribution of a selection ...

Screenshot:
First row: Befor / Second row: after

It would be nice to have an additional Radius Measurement tool with short leads. The current Radius tool shows always the lead line to the center of the radius what is in many cases not useful.

I’m not asking for a workaround

The 3dConnexion Space Navigator would be wonderful as a pan and zoom control. I find it extremely useful in SketchUp and when I switch from that to QCAD am always disappointed to find it doesn’t work.

3dconnexion DOT com/buy/shop.html?3dxcp=GA_GA_search_google_US_Brand

While full support for the buttons and such would be nice, just the ability to map the axis to pan and zoom would be wonderful.

To improve useability/efficiency I would like to propose the following changes/additions to the layer list:

1) Combining the show and hide button into one button.

Clicking once will hide all layers, clicking again will show them all again.

2) A “lock/unlock” button.

Clicking once will lock all layers, clicking again will unlock them all again.

Regarding the icons I suggest that instead of show both the black and grey version of the eye/lock, you could switch between them depending on the state the switch-button is in. Also the mouse-over-text could/should change with the state.

See drawing: I can’t seem to be able to manually change to the “To” variants – that is, override the decision of the label/arrow placement engine.

The circle in the attachment is a borderline example of when even just in this form I would more like it on the outside. If the drawing is crowded in that area, it would be even more useful to have it the other way around.

Please seet topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3124

Please see last few posts here:

http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3227&p=11777#p11777

See:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3410

I would love to have a ‘Double Line’ tool in QCAD.

For me this would be such a time saver when drawing out building floor plans in QCAD.

Please see:

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5024#p18601

For and behalf of mandrena

To add another Arc tool option in Arc tools set:

1.Specify Start point for Arc.
2.Specify End point for Arc.
3.Specify “Tangent” direction (without being restricted in input field) so you can visually select a point on your desired Tangent line!

To add the option to ‘print only’ selected area in a drawing.

Duplicate (copy, clone) a layer with or without entities on it. New name can be specified by user.

To have the option to set your own ‘user defined’ line weight.

Some times I need to have the dimension info using the Vertical Dimension tool displayed horizontally.
See attached image:
Possibly this option could be added to the Label drop down menu.

Feature request- text string find/replace

Scope: entire drawing/selected objects set/chosenlayer only

Functionality:

‘find’ with ‘zoom to’, first, next, previous, last

‘replace’ with ‘next’, ‘undo’, ‘all’

This functionality is very useful when using QCad for system diagrams and the like.