QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  ascSummaryStatusProgress
2021QCAD (main)Performance IssueVery LowCannot work with big dwg filesAssigned
0%
Task Description

Openning a big file or doing any action in it, takes minutes to load.
Even dragging the scrollbar slightly left or right, takes mintues to redraw the canvas again, which makes QCAD un-usable for professional use.
Is there a way to make QCAD usable, after loading completed:
- Like suppressing edit until user says so,
- or taking snapshots of rendered canvases to another file and use it, as windows uses thumb.db ( for negative latency :P )

PS: I wish I could help a bit, but my hand are tied. I am just a java freak, I am opt to any idea of porting it to java, if she is still alive.

Tu─čalsan Karabacak
EEE, MSc Mobile Comp & App, IWE

2011QCAD Community EditionSuggestionVery LowUpdate QCAD CE SpatialIndex module to latest versionAssigned
0%
Task Description

Building with the bundled version, 1.8.5, works fine.

When I try to build using the system version, which for Mageia Cauldron is 1.9.3, the build fails.

https://raw.githubusercontent.com/kekePower/mmbl/master/qcad/2019/12/11/20%3A13%3A48/log.qcad

Here is the current spec file for version 3.23.0.4.
https://svnweb.mageia.org/packages/cauldron/qcad/current/SPECS/qcad.spec?revision=1465894&view=markup

It looks like qcad is incompatible with versions above 1.8.5.

Are there plans to port to the new version?

Thanks in advance.

1974QCAD (main)Bug ReportVery LowFile > Print Preview: Cannot move paper in new drawingUnconfirmed
0%
Task Description

Yesterday I set up a Windows 64 bit install of QCAD Pro which shows the same bug I have been seeing for a while in the Community linux git repo.

Create a new drawing and then go to “Print preview”. Enable “Move paper postion”, the cursor changes to the hand icon, but the paper position is unable to be moved. Only by saving the drawing, exiting the program, restarting and reopening the drawing, will the “Move paper postion” function correctly.

Affected versions tested:

Windows 64bit installer download, as of yesterday.
Linux 64bit build from git, about 20minutes ago.

For what it’s worth, this bug is not present in this previous git checkout:

Version:
3.21.1.0 (3.21.1)
Internet:
QCAD.org
Build Date:
Jul 2 2018
Revision:

Qt Version:
5.7.0
Architecture:
x86_64
Compiler:
gcc 6.3.1

Thanks for a great product.

1923QCAD (main)Bug ReportVery LowFaulty rendering Polylines with Global/Local Widths and...Assigned
0%
Task Description

Win7pro 32bit Qcad 3.23.0

Andrew,
The Arc segments of Polylines with Global or any Local Width render faulty where Global Z or any of the arc’s local Z is not zero.

In the attached drawing setting the Global Z of the inner poly to 5,10,...

The setting of Z to not zero affects the radius of the projected arc and not the bulging of the poly.
It also affects the projected widths of the line inversely, but not by changing the widths properties.

Pritty rare combination! True.
Qcad is 2D native! True.

Flatten will resolve this.

It is not a purely visual rendering fault, the poly will explode as such.

Maybe similar flaw as with uneven scaling blocks with arcs.
https://qcad.org/rsforum/viewtopic.php?f=8&t=5566#p20703

Regards

1922dwg2bmpFeature RequestVery LowAdd error message when requesting raster for a non-exis...Assigned
0%
Task Description

It would be nice if QCAD spit some kind of warning message when trying to render a layer with a name that doesn’t exist (and perhaps render nothing), rather than silently rendering an empty image. :D

See https://qcad.org/rsforum/viewtopic.php?f=33&t=6453

1920QCAD (main)Feature RequestVery LowEdit > Application Preferences: Add preference to disab...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447

1919QCAD (main)Bug ReportVery LowWrong order XY(Z) for Ordinate Dimension in property ed...Assigned
0%
Task Description

Win7pro Qcad Pro 3.22.1.2

In property editor
properties of an Ordinate Dimension

Without Show Z
DefPoint is displayed in order YX?

With Show Z
Origin is displayed in order XZY?
DefPoint is displayed in order YZX?
LeaderEndPoint is displayed in order ZXY?

Regards

1905QCAD (main)Bug ReportVery LowView > Property Editor: Changing attribute of block cha...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6367#p23947

1900QCAD (main)Bug ReportVery LowRemote shares initially not accessible.Assigned
0%
Task Description

My data files are stored on network shares (synology) with a GB link. QCAD Pro is run in Admin mode.

While in my Windows browser all remote shares are accessible (Green), in the QCAD file open menu they are initially shown as not accessible (Red). By accessing a specific drawing file in a remote share, the share will open and turn green.

Same behavior using ‘Open recent’. Always the message is given that the requested file does not exist, and the file is wiped from the ‘Recent Open’ list. Only if the share is first accessed through ‘Open’ with a random file, it will turn and a ‘recent open’ file for that share will open.

Drag and Drop from a remote share will never work.

1788QCAD (main)Feature RequestVery LowNew snap: reference points of a block referencesAssigned
0%
Task Description

I know this was reported and fixed before ...

https://www.qcad.org/bugtracker/index.php?do=details&task_id=843

... but it looks like we have the issue now back with some kind of variation.

If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.

If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.

Edit: New Test drawing:

1765QCAD (main)Bug ReportVery LowErrors with polyline offsetAssigned
0%
1 Task Description

Win 7 32 bit QCAD 3.20.1

Ofsset of a base-line with arcs results in massive ammount of errors.
Most of them occur as a cluster of very tiny segments and are part of the offset. (zoom far in at the red circles)
Mostly they occur where the offsetted arcs should merely be trimmend pairwise.
Some occur as detached entities or as detached strings of entities very near the offset (strings not documented).
Spooks occur at opposite site when base-line is not closed.
360┬░ curls can occur with R = Offset.
Null-entities may occur (not documented, hard to find and not able to copy).

The base-line is checked and sound and has mixed tangentially or not tangentially connected arcs.
Offsetting the mother base-line of the base in the file has similar effect but not all and/or different ones.
Also encountered with offseting polys from fonts.
Used to define pocket paths for CNC.
Detected because the CNC driver will not accept Self-crossers, Null-entities or open ends depending on the settings.

Work arround is to explode and select small entities but this does not solves the issues.
1) Choosing the tolerance large enough will detect small segments that should stay.
2) Recombining will generate new ones at the place where the main segments remain crossed.
Cleaning up the paths is a daunting process with some thousand segments for several offsets.

I assume this has an infuence on the CAM part of QCAD too unless the offset method is different.

1760QCAD (main)Bug ReportVery LowSelf-crossing polylines can't be cut twice at segment c...Assigned
0%
Task Description

Re-entering dividing problem from  FS#1757 

Divide the poly selecting near segment 1 at the segment crossing.
> A new node is inserted on the crossing and made start and end node.
Divide the poly again selecting near segment 2 at the segment crossing.
> no division appears to be done.

One can’t divide the second segment at the crossing

Presumed intended behaviour like  FS#1750 

Regards

1719QCAD (main)Bug ReportVery LowUndo on converted drawing leads to wrong label position...Assigned
0%
Task Description

Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.

1691QCAD (main)Bug ReportVery LowIssue with Layouts after "File-Revert"Assigned
0%
Task Description

QCad 3.19.2 Professional, 64bit, Liux Mint

Case:
1. Open some saved drawing with viewport entities on layout block (paper space). Print Preview mode is “On” automatically.
2. After “File-Revert” drawing is reopened on layout block (paper space), but now Print Previw mode is “Off” .

For example can try on “flange.dxf”

1649QCAD (main)Feature RequestVery LowAdd configuarable format options for saving blocks to l...Assigned
0%
Task Description

Add configuarable format options in application preferences for saving blocks to library to either dxf or dwg.

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

1443QCAD (main)Bug ReportVery LowView > Status Bar remains uncheckedAssigned
0%
Task Description

Status Bar menu remains unchecked even it is toggled on or off

1426QCAD (main)Feature RequestVery LowLoad drawings that were open when closing QCAD on start...Assigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4249

991QCAD (main)Feature RequestVery LowAdd warning when overwriting custom propertyAssigned
0%
Task Description

Property Editor - Geometry - Custom - Add Custom Property

If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.

752QCAD (main)Feature RequestVery LowAdd support for the 3dConnexion Space Navigator (Pan an...Assigned
0%
3 Task Description

The 3dConnexion Space Navigator would be wonderful as a pan and zoom control. I find it extremely useful in SketchUp and when I switch from that to QCAD am always disappointed to find it doesn’t work.

3dconnexion DOT com/buy/shop.html?3dxcp=GA_GA_search_google_US_Brand

While full support for the buttons and such would be nice, just the ability to map the axis to pan and zoom would be wonderful.

2033QCAD/CAMBug ReportLowRepeated warning message while updating toolpathAssigned
0%
Task Description

While updating or regenerating toolpath on the attached dxf file I repeatedly get the warning message in the attached jpg file. If I keep clicking OK then the toolpath is successfully generated. This did not happen in version 3.23.0 with the same file.

2031QCAD (main)Bug ReportLowOrdinate Dimensions don't act as expectedAssigned
0%
Task Description

Hi Andrew

I wasn’t sure if this was a bug or feature request, when I’m drawing part sets that only change in lengths I dimension them
to save time then I stretch and save as whatever filename... I was surprised when Qcad reacted the way it did when stretching ordinate
dimensions on a part, the 1st thing I did was window select over the dimensions which didn’t work ( this is the typical way for
stretching ordinate dimensions in AutoCAD,IntelliCad,Draftsight etc )... anyway Husky and I had a fairly long debate and he told me
I had to select the object and only parts of the ordinate dimensions which when stretched leaves a bit of tidying up to do..
Please let me know if I’m going about this the wrong way.. do i really have to do multiple stretches and move all the jogged dimensions?

See Topic https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6901&start=15 It started off with negative values for ordinate dimensions then turned into problems stretching ordinate dimensions..
I also posted dropbox links to quite a few videos..

Attached is a zip file containing some screenshots plus the original dxf file..

Best Regards
John Hyslop

2018QCAD (main)Feature RequestLowLayer visibility setting per view/view-portAssigned
0%
Task Description

In a medium complex drawing it’s often too much details to have all layers in a drawing visible at once. Also, it is of great importance to be able to have a single model to avoid duplication of work and risk inconsistency.

So i would like to create a number of views where each view has selected layers visible (that makes sense for the purpose of the view) and then assign the views to different layout blocks (using view-ports) in paper-space to be able to setup printing of several views on the same page/PDF

This also means that view-ports would have to be aware of what view they are displaying (if any besides the standard-view).
This will then make it possible for printouts of different views with selected layers visible (different for each view and view-port) and still have only one model. Today this is not possible.

As it is today the only limited workaround is to set the layers you want to display, print/PDF of that viewport on separate page, and then change it for the next page, and so on. The big drawback is that you cannot have two different views/view-ports on the same page with different layers visible. Also, for large drawing it is painful to have to do a lot of manual setup for each rendering of the complete drawing.

2016QCAD (main)Bug ReportLowOffsetting multi selection of polylines halts prematureAssigned
0%
Task Description

See:
https://qcad.org/rsforum/viewtopic.php?&t=6827&p=25992#p25992

Offsetting 32 polys from ellipses fails.
Offsetting 16 polys can be completed with 2 selections for outer and 2 for inner.

For some reason the offset function halts premature.

Regards,
CVH

2014QCAD (main)Bug ReportLowFocus on Options Toolbar failsAssigned
0%
Task Description

Scenario: e.g. Tools Move/Copy and Rotate switched to “use without dialog.

Launch within a drawing Move/Copy, use the Keyboard keys CTRL + Space to focus on the Option Bar - the field for Numbers is Highlighted and I can change it. Further navigation with keys on the keyboard depends on remembered option (copy yes/no etc what make a navigation possible or not. It looks like the navigation with the Arrow keys is focused on the canvas and sooner or later the courser will jump to the Command Line or Property editor. Same behavior with the Rotation tool.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6828

1999QCAD (main)Feature RequestLowViewport: Add additional properties for controlling dim...Assigned
0%
1 Task Description

When working with multiple Viewports with different scale it could be very useful to have extra properties controlling how dimensions are rendered in the viewport:

1)
E.g an extra “Dimension Scale” under “Scale” in the Viewport selection’s ‘Specific Properties’ section, could allow having the same size when printed.
This Dimension Scale would be multiplied on top of the Scale value, but only for Dimensions rendering.

2)
Toggle button for hiding any dimensions in the Viewport. Maybe this should be controlled by being able to specify a Layer that should be hidden in this Viewport only, then I could select my Dimensions layer here.

The Viewport properties:
https://i.imgur.com/s07JtaB.png

1983QCAD (main)Feature RequestLowTrim All or Bulk Break outAssigned
0%
1 Task Description

This is a trim method I am missing in Qcad.

20 years ago it existed in CadKey.
You had a bunch of lines or segments.
You defined a (new) line or segment as cutter.
‘Trim All’.
You pointed at the side of the cutter entity to trim all intersecting at that side.

Pritty the same as in this topic:
https://qcad.org/rsforum/viewtopic.php?t=5221

Only in rare cases I can use Husky’s workaround as pro.
It all depends on what else is in the clipping rectangle that is needed to trim all intended.
If of no use all single crossing entities have to be chosen one by one.

Regards,
CVH

1982QCAD (main)Feature RequestLowmeasure DIN 1356Assigned
0%
Task Description

To measure in the format DIN 1356 , Architect
It is hard work to do this manual input with meta characters.

1977QCAD (main)Feature RequestLowCorresponding coordinate format Assigned
0%
Task Description

Hi,

It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.

This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.

Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).

1976QCAD (main)Feature RequestLowEnvelope at offset to a poly toolAssigned
0%
Task Description

See:
https://www.qcad.org/rsforum/viewtopic.php?t=6650

1972QCAD (main)Bug ReportLowHatch import fails for boundaries with many very small ...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6648

1971QCAD/CAMBug ReportLowCAD/CAM 3D SimulatorAssigned
0%
Task Description

Hallo Andrew,

Found a bug in the 3D Simulator execution

1954QCAD/CAMReleaseLowRevised PWM Post ProcessorAssigned
0%
Task Description

Hallo Andrew,

I have revised the PWM Post Processor to Revision D.

1940QCAD/CAMFeature RequestLowCAM > CAM Configuration: Add program descriptionAssigned
0%
1 Task Description

Add a program description to the CAM configuration dialog and export to postprocessors as variable.

See also:
https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649

1934QCAD (main)Feature RequestLowDiametric text - overlaidAssigned
0%
Task Description

Diametric text is always placed above a horizontal measurement.

I often want to indicate both the inside and outside diameter of an object e.g. a wheel using diametric text. The text is overlaid and illegible.

To avoid text overlapping, I use Horizontal Aligned because I can control the position of the text to avoid illegible text.

A better method would be to alternate the placement of diametric text (alternatively) above and below a measurement so that in the majority of cases an overlap would be avoided.

Similarly for a vertical measurement, the text is overlaid and illegible.

When the angle is almost vertical, the angle controls the side the text appears however it also reverses the direction of the text (which is logical but not attractive).

Kind regards
Simon

1930QCAD (main)Feature RequestLowOption disable "Auto Zoom on load" for saved "Layout Vi...Assigned
0%
Task Description

Hi,

my setting for “Auto Zoom on load” is checked to on. That works perfect for me for most of my drawings.

But if I save a drawing with Layout Viewports then I have to adjust every Viewport again after loading.

Would it be possible to have an option below Application Preferences / Graphics View / Appearance / Auto Zoom on load / ON which excludes drawings saved with Layout Viewports?

1928QCAD (main)Feature RequestLowOptionnally 'Auto clean up' after generation of NaN / N...Assigned
0%
1 Task Description

Some functions / methods can generate some sort off entity or part with NaN / Null / Null-lenght ... props.
Some explicitly don’t and test their actions with isNull().

As these serve a purpose in some processes, trails of them can be part of the results.
For some users Null / Null-lenght are meaningfull, for other users these produce errors down the line.
In a few cases its a desirable feature eg. controlpoint spline.
(Allthough there are no Null props involved with equal successively controlpoints)

Many problem post on the forum are related to Null - Zero and so on.

In some cases it can’t be undone by re-editing the drawing.
https://qcad.org/bugtracker/index.php?do=details&task_id=1925

If it can’t be undone by Undo/Redo it is a bug.
https://qcad.org/bugtracker/index.php?do=details&task_id=1757

In some cases there is a difference noticed after file save-close-open.

1926QCAD (main)Feature RequestLowNo negative coordinate values ? (DO command)Assigned
0%
1 Task Description

Just starting with QCAD, for some hours now - really excellent user interface (compared to other low budget CADs, like DCAD, or BeckerCAD...) !

Surprisingly, point coordinates - entered via the command line, and shown with correct positions on the drawing- are not displayed correctly with the ‘dimordinate’ (DO) command.
There are no negative values, even when the center point (0;0) is right in the middle of the drawing, so points left and below should have !

GW.G

1917QCAD (main)Feature RequestLowAutomatic labels with static information of the drawingAssigned
0%
Task Description

I would like static information of the drawing (like scale, creation-date, modified-date, revision etc) to be available as automatic labels to be placed in the drawing (with selectable style, font etc)

This would greatly simplify the creatin of title sections in the drawing and making sure it is consistent with the actual drawing and not requiring manual “synchronization”.

1916QCAD (main)Bug ReportLowMoving an object in an angled viewport with mouse does ...Assigned
0%
Task Description

To reproduce

1. Select a new view-port in model-space
2. Select the appropriate paper-space
3. When the paper space opens change the angle of the viewport to 90 degrees
4. Place view-port in paper space
5. Select the view-port in paper-space by clicking it
6. Try to move the object itself in the view-port (by clicking the “top” dot) to the right by moving the mouse to the right while holding the left mouse-button.

Actual

The object in the viewport moves down vertically NOT to the right

Expected

The object moves to the right

(It seems mouse movement does not compensate for the rotated angle of the viewport)

Workaround

None, except compensate for the angle in your head and moving the mouse the “wrong” way when correcting the placement of objects in the view-port

1915QCAD (main)SuggestionLowViewport does not rotate view-port when changed in pape...Assigned
0%
Task Description

To reproduce

1. Select a new view-port in model-space
2. Select the appropriate paper-space
3. When the paper space opens change the angle of the viewport.

Actual

The object in the viewport changes but the viewport itself remains unchanged

Expected

That both the view-port and the object changes angle as the angle is updated

Motivation

If you abort the placement (but keep the angle) and go back to model-space and then redo the operation the view-port is rotated along the angle. It seems that the viewport only picks up the initial angle once the paper-space is open and ignores any changes thereafter

Workaround

1. Select the view-port per normal in model-space
2. Open the paper-space and set the wanted angle but do not place the view-port in paper space
3. Abort the placement on paper-space and redo the whole operation

Once the paper space is opened again the view-port will have the chosen angle

1913QCAD/CAMBug ReportLow3D Simulation Behaves oddAssigned
0%
Task Description

Hallo Andrew,

testing the drill toolpath I used single point markers.

In 3D simulation the tool drills the toolpath AND uses the drill as a mill.

Cam Export and generated G-code is not effected.

1912QCAD/CAMBug ReportLowTool Description ErrorAssigned
0%
Task Description

Hallo Andrew,

Testing the drill toolpath I find it hard to select the correct tool by a small bug

1911QCAD/CAMFeature RequestLowDrill ToolpathAssigned
0%
Task Description

Hallo Andrew

It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.

1903QCAD (main)Feature RequestLowSaving layer settings, e.g. visibility status, associat...Assigned
0%
Task Description

In a medium complex drawing it may be too much details to have all layers in a drawing visible at once.

Instead a number of views would be created that saves not only zoom level and position but also what layers are visible and not (as appropriate for the purpose of that particular view). This is very cumbersome (to the extent it is not really realistic) to achieve today and requires a lot of duplication of both model and layers.

The advantage of adding this is the ability to have only one model (with multiple views) and avoid duplication of work and the risk of inconsistency inherent with many copies of the model.

As a further (and natural extension to this) would be the ability to used this functionality with view-ports to be able to create (possibly many) paper-spaces from a single model. This would however require view-ports to be aware of what view they are a window into. A single change in the model would then propagate to all defined view-ports and paper-spaces.

1902QCAD/CAMFeature RequestLowCAM G-Block ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very handy G-code Block Toolpath. This ‘toolpath’ also solves a lot of “editing requests”.

1901QCAD/CAMFeature RequestLowCAM Traverse ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very common Traverse Toolpath.

Example added as pdf.

Greetings

1895QCAD (main)Feature RequestLowAdd support for block transformation matricesAssigned
0%
Task Description

Support transformations by transformation matrix for block references.

See also:
https://www.qcad.org/rsforum/posting.php?mode=reply&f=33&t=6333

1890QCAD (main)Feature RequestLowPossibility to address an QCAD extern font folderAssigned
0%
Task Description

Like the Library Browser it would be nice to be able to define a extern font source folder. Especially now after we are able to create our own cxf fonts with QCAD. :-)

The reason is the same why we have it already for the library - without it we have to copy our individual fonts manually every time after a QCAD update to use them uninterrupted for existing and new drawings.

1888dwg2bmpFeature RequestLowAdd support to disable hatch rendering on "dwg2bmp"Assigned
0%
1 Task Description

Hi!

A friendly request to add an option to disable hatch rendering on “dwg2bmp” conversions.

Depending on the nature of the conversion and the density of the hatch, this may render unintelligible images (see attachments). The option could look like “-t, -nohatch” to indicate hatches should be hidden before rendering. This could potentially become an option too for “dwg2svg” or “dwg2pdf.”

Amazing product, thank you so much!

Showing tasks 1 - 50 of 382 Page 1 of 81 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing