QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  ascSeveritySummaryStatusProgress
1923QCAD (main)Bug ReportVery LowFaulty rendering Polylines with Global/Local Widths and...Assigned
0%
Task Description

Win7pro 32bit Qcad 3.23.0

Andrew,
The Arc segments of Polylines with Global or any Local Width render faulty where Global Z or any of the arc’s local Z is not zero.

In the attached drawing setting the Global Z of the inner poly to 5,10,...

The setting of Z to not zero affects the radius of the projected arc and not the bulging of the poly.
It also affects the projected widths of the line inversely, but not by changing the widths properties.

Pritty rare combination! True.
Qcad is 2D native! True.

Flatten will resolve this.

It is not a purely visual rendering fault, the poly will explode as such.

Maybe similar flaw as with uneven scaling blocks with arcs.
https://qcad.org/rsforum/viewtopic.php?f=8&t=5566#p20703

Regards

1924QCAD (main)Bug ReportLowSweepAngle = 0Assigned
0%
Task Description

Win7pro 32bit Wininstaller Qcadpro 3.23.0

Draw an arc.
Select the arc.
In Property Editor:
Set start angle to 135
Set end angle to 135

SweepAngle = */-360

edit the end angle and add “+360”, hit enter

SweepAngle = 0

An arc with zero sweep is a point.
A point is not an arc.
With the same start and end parameter an arc should have a sweep of +/-360.
As for entries by points or by angles.

Regards

1933QCAD (main)Bug ReportLowAdvanced SVG export file overwrite check doesn't use up...Assigned
0%
Task Description

In the Advance SVG Export dialog, when I edit the filename to be different than the default file that already exists and then clear the checkbox for “Overwrite existing file without asking” just to make sure that I haven’t already created a file with the modified name as well, then I get a popup warning that the export would overwrite the default filename, not the name as edited. In other words, the overwrite check ignored the fact that I edited the filename.

Observed on MacOS Mojave (10.14), but probably applies to all.

1936QCAD (main)Bug ReportLowver 3.23 not saving font informationAssigned
0%
Task Description

The attached file is not saving font preference.
All fonts on the online layer are reported as the standard font. If I highlight one or all of the text entities and change the font to something like Yu gothic light, the property page reports yu gothic light and the screen reflects the changed font.
If I save, close and reload, the fonts for all text is again “standard”.

So then I try to enter new text via the “A” draw text command icon. I select “Broadway.ttf” as the main font in the text entry dialog.
One word “Broadway” is entered as the text. it appears on the upper left of the screen as expected and the font name is Broadway in the property editor. If I look at the dxf file source there is a whole bunch of text styles.
I save and close the file, and then open it again. Now the word Broadway has changed to font name “standard” in the property editor and is very definitely not the Broadway.ttf font.

I am not the originator of the file, I am just trying to change the font. If I start a new file and enter new text the font saves just fine, so I am thinking it is a setting somewhere, but I am unable to find it.

We (me and my customers) use these files for engraving so exact font is critical.

1960dwg2pdfBug ReportLowdwg2pdf command failAssigned
0%
Task Description

Good afternoon, I found a bug.

Source file: B5.dwg.

Command line: .\dwg2pdf.bat -f -a -recompute-dim -ltscale=1 -font-substitution Standard GBK path

After I used the command, the message “Warning: standard font not found” occured. And B5.pdf is not found.
Convert is fail.

1961dwg2pdfBug ReportLowToo many drawings are missingAssigned
0%
Task Description

Hello, I found a bug.

Original file: 006–【武汉会展中心店】一层合用前室.dwg

Converted file: 006–【武汉会展中心店】一层合用前室.pdf

Command line: .\dwg2pdf.bat -f -a -recompute-dim -ltscale=1 -block=布局1 path

Bug description file: problem8.png

As you see. I use dwg2pdf to export the block named “布局1”. There are too many drawings missing.

1971QCAD/CAMBug ReportLowCAD/CAM 3D SimulatorAssigned
0%
Task Description

Hallo Andrew,

Found a bug in the 3D Simulator execution

1972QCAD (main)Bug ReportLowHatch import fails for boundaries with many very small ...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6648

1974QCAD (main)Bug ReportVery LowFile > Print Preview: Cannot move paper in new drawingUnconfirmed
0%
Task Description

Yesterday I set up a Windows 64 bit install of QCAD Pro which shows the same bug I have been seeing for a while in the Community linux git repo.

Create a new drawing and then go to “Print preview”. Enable “Move paper postion”, the cursor changes to the hand icon, but the paper position is unable to be moved. Only by saving the drawing, exiting the program, restarting and reopening the drawing, will the “Move paper postion” function correctly.

Affected versions tested:

Windows 64bit installer download, as of yesterday.
Linux 64bit build from git, about 20minutes ago.

For what it’s worth, this bug is not present in this previous git checkout:

Version:
3.21.1.0 (3.21.1)
Internet:
QCAD.org
Build Date:
Jul 2 2018
Revision:

Qt Version:
5.7.0
Architecture:
x86_64
Compiler:
gcc 6.3.1

Thanks for a great product.

1997QCAD/CAMBug ReportLowCan't export gcode, intermittentlyAssigned
0%
Task Description

When I create a simple drawing, I cannot export the gcode until I restart qcad.

general steps to reproduce the issue:
1. open a new drawing
2. Add a letter “D” near the origin in Arial font, about 7mm tall.
3. explode it
4. save the drawing
5. Fill in in the “cam configuration” 6. Select the drawing and generate the tool paths.
7. Hit the “export button” or the menu item.
8. Observe that you see the “camexport” command appears in the command section, but there is no file generated for the gcode.

If you restart qcad, then the gcode will export as expected. Also, it appears to work for more complicated drawings. I had the same issue, when I tried to generate the same thing, but using the string “November 2019” at 5mm height. I am using up to date MX Linux with kernel version 4.19.0. I also observed this behavior under Windows 10 professional.

693QCAD (main)Feature RequestMediumSupport for external references (XREF)Likely to be implemented
0%
14 Task Description

Support for external references (XREF)

694QCAD (main)Feature RequestLowUser coordinate systems (UCS)Assigned
0%
5 Task Description

UCS support.

763QCAD (main)Feature RequestLowHatching with just one clickAssigned
0%
5 Task Description

My task: To hatch an area.

Right now, if I want to fill an area with a hatch pattern, I have to select all the enclosing objects (lines, arcs) and then I can select the hatch tool. That can be under some circumstances a tedious task.
To illustrate this, I created a simple example (see Attachment 1: Hatching.png).

Step 1: Create a rectangle.
Step 2: Draw four vertical lines.
Step 3: Select the four lines surrounding the first area. –> Problem! The horizontal lines are too long.
Step 4: Divide the long horizontal lines of the rectangle where the vertical lines touch. Now the lines surrounding the three areas can be selected.
Step 5: Hatch the selection. Done.

Just for fun try recreating my second example (see Attachment 2: Hatching2.png)

Therefore I would like to suggest a far more simple approach.

Step 1: Select the Hatch Tool.
Step 2: Click inside the area you would like to be hatched. Done.

Of course that would mean that the hatch style is already pre-defined and can be changed later, if needed.

In this way productivity can be increased by ... [fill in you own estimate] ... times.

Example 2 would need only 13 clicks to hatch all the areas (including the hatch tool button).

778QCAD (main)Feature RequestLowRemove multiple layersAssigned
0%
5 Task Description

It would be a nice feature to be able to select multiple layers to remove them all at once.

1428QCAD (main)Feature RequestLowSnap middle of the minimum distance between two entity'...Assigned
0%
5 Task Description

Hi,

from time to time I need to place a circle etc precisely between two entity’s - what is a lot of construction work to get it correct. With the new “Info tool “Distance Entity to Entity” we have already the base for a new snap tool which could help to get rid of the time consuming construction process in cases like this. I would appreciate to get a new snap tool which is able to figure out the shortest distance between to entity’s and then will snap to the middle of it.

Pic 1: Given situation
Pic 2: Result after using this new snap tool

Would it make also cense to have a second new snap tool which works opposite for the furthermost distance between two entity’s?

1723QCAD (main)Feature RequestLowDetecting overlapping line / arc segmentsAssigned
0%
5 Task Description

Add a tool to detect overlapping segments or lines and arcs.
Similar like the “overkill” command in other CAD systems.

895QCAD (main)Feature RequestLowArea calculation based on existing entitiesAssigned
0%
4 Task Description

Use case:

  • Start tool
  • Choose one entity of the contour
  • If contour is closed, area of closed contour is calculated an printed in the command line history
  • Configuration parameters: segment length for arc interpolation
972QCAD (main)Feature RequestLowDistribute equally option ...Assigned
0%
4 Task Description

It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.

1165QCAD (main)Feature RequestLowNew Create Spiral ToolAssigned
0%
4 Task Description

A new tool to create Spirals would be great to have, with an option to restrict the decline to achieve to draw either Logarithmic or Linear styles.

Please see related topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3236

1224QCAD (main)Feature RequestLowRevision cloudsLikely to be implemented
0%
4 Task Description

Add support to draw revision clouds or convert polylines, ellipses, circles to revision clouds.

1721QCAD (main)Feature RequestLowInsert table toolAssigned
0%
4 Task Description

Hi Andrew,

I’m not sure whether this has been added or suggested already. It would be great to have a built in QCAD table tool for producing cutting lists or bill of materials etc. A dedicated table tool would be a real boost to QCAD Pro ;)

Many thanks

Clive

704QCAD (main)Feature RequestLowOld Hatch FunctionAssigned
0%
3 Task Description

It would be nice to implement the old hatch function as a tile function in parallel with the newer more industry standard hatch function. A tile function that would allow overlap +/- would be even better, and a great productivity boost, almost like an array within a set of bounds.

Thanks, Bob

734QCAD (main)Feature RequestLowPossibility to distribute a selection equal to each oth...Assigned
0%
3 Task Description

It would be nice to have an extra option for the Align tool what provides the possibility to an equal distribution of a selection ...

Screenshot:
First row: Befor / Second row: after

752QCAD (main)Feature RequestVery LowAdd support for the 3dConnexion Space Navigator (Pan an...Assigned
0%
3 Task Description

The 3dConnexion Space Navigator would be wonderful as a pan and zoom control. I find it extremely useful in SketchUp and when I switch from that to QCAD am always disappointed to find it doesn’t work.

3dconnexion DOT com/buy/shop.html?3dxcp=GA_GA_search_google_US_Brand

While full support for the buttons and such would be nice, just the ability to map the axis to pan and zoom would be wonderful.

766QCAD (main)Feature RequestLowLayer List: Add "Lock All Layers"Assigned
0%
3 Task Description

To improve useability/efficiency I would like to propose the following changes/additions to the layer list:

1) Combining the show and hide button into one button.

Clicking once will hide all layers, clicking again will show them all again.

2) A “lock/unlock” button.

Clicking once will lock all layers, clicking again will unlock them all again.

Regarding the icons I suggest that instead of show both the black and grey version of the eye/lock, you could switch between them depending on the state the switch-button is in. Also the mouse-over-text could/should change with the state.

952QCAD (main)Feature RequestLowDimensions: manually control arrow positionAssigned
0%
3 Task Description

See drawing: I can’t seem to be able to manually change to the “To” variants – that is, override the decision of the label/arrow placement engine.

The circle in the attachment is a borderline example of when even just in this form I would more like it on the outside. If the drawing is crowded in that area, it would be even more useful to have it the other way around.

1126QCAD (main)Feature RequestLowSuggestion for Dimension Location settingAssigned
0%
3 Task Description

Please seet topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3124

1171QCAD (main)Feature RequestLowSelecting the right entity when entities are close / on...Assigned
0%
3 Task Description

Please see last few posts here:

http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3227&p=11777#p11777

1206QCAD (main)Feature RequestLowLink drawings with each other to update layers, blocksAssigned
0%
3 Task Description

See:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3410

1218QCAD (main)Feature RequestLowEdit blocks in the drawing instead of isolatedAssigned
0%
3 Task Description

see:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3466

1470QCAD (main)Feature RequestLowDouble line tool requestAssigned
0%
3 Task Description

I would love to have a ‘Double Line’ tool in QCAD.

For me this would be such a time saver when drawing out building floor plans in QCAD.

1488QCAD (main)Feature RequestLowDimension text positionAssigned
0%
3 Task Description

This one is a really important one for me, as currently I am doing a lot of dimension and annotation drawings.
I would like to request an option to be added to the dimension settings for both drawing and application settings to be able to choose whether the dimension text is to the right or left side or over the top or underneath the dimension line.
This would help tremendously when a lot of dimensions are needed!

Regards

Clive

1628QCAD (main)Feature RequestLowMove / Copy and snap tangentialAssigned
0%
3 Task Description

Please see:

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5024#p18601

228QCAD (main)Feature RequestLowInsert current date (and other fields)Assigned
0%
2 Task Description

Insert field into drawing that displays current date, file name, ...

467QCAD (main)Feature RequestLowFeature request for new Arc tool option to add to Arc s...Assigned
0%
2 Task Description

For and behalf of mandrena

To add another Arc tool option in Arc tools set:

1.Specify Start point for Arc.
2.Specify End point for Arc.
3.Specify “Tangent” direction (without being restricted in input field) so you can visually select a point on your desired Tangent line!

516QCAD (main)Feature RequestLowTo add option to 'print only' selected area.Assigned
0%
2 Task Description

To add the option to ‘print only’ selected area in a drawing.

579QCAD (main)Feature RequestLowCopy layers / blocksAssigned
0%
2 Task Description

Duplicate (copy, clone) a layer with or without entities on it. New name can be specified by user.

618QCAD (main)Feature RequestLowuser defined lineweightAssigned
0%
2 Task Description

To have the option to set your own ‘user defined’ line weight.

620QCAD (main)Feature RequestLowoption to have horizontal dimension info using vertical...Assigned
0%
2 Task Description

Some times I need to have the dimension info using the Vertical Dimension tool displayed horizontally.
See attached image:
Possibly this option could be added to the Label drop down menu.

708QCAD (main)Feature RequestLowTo re-introduce Tile and Cascade window optionsAssigned
0%
2 Task Description

To re-introduce Tile and Cascade window options like as before in QCAD 2.2.2.

758QCAD (main)Feature RequestLowLengthen/Shorten tool - add additional optionAssigned
0%
2 Task Description

When using the Lengthen/Shorten tool it would be good to have an additional option to be able to pick a point to lengthen or shorten to.

767QCAD (main)Feature RequestLowMerging/Combining segments of a straight line into oneAssigned
0%
2 Task Description

Sometimes you end up with a straight line which is broken/split into several parts. It would be great to have a tool to merge/combine these segments into one.

That would be the opposite/complementary tool to the “Split Entities” tool.

770QCAD (main)Feature RequestLowPolyline tool to delete segments between two nodes, lea...Assigned
0%
2 Task Description

I guess this is a case of wording and wrong expectations.

The polyline tool “Delete Segments between two nodes” removes nodes, but not segments as the title and the icon suggests.

I propose to rename it to “Delete Nodes between two nodes”.

A tool which actually removes line segments from a polyline, leaving gaps, could indeed be useful to some users.

I think of a straight polyline with several segments. Then I remove some segments. I end up with a polyline with “holes” in it. Now I could stretch that polyline and all the remaining segments and holes stretch proportionally. Could be handy some times.

774QCAD (main)Feature RequestLowAdditional Button in the Blocklist menu for "Create Blo...Assigned
0%
2 Task Description

If I work in QCAD only with Toolbars (and not with the “Cad Tools” there is nowhere a Button to find for “Create Block from selection”.
If I have to create a Block based on a selection I have to work with the Menu or have to activate the Cad Tools.

But, if I look at the Blocklist menu there is a function (+) to add an empty Block. It would be nice to have this button working for both situation - empty Block or depending on a selection to “Create Block from selection”.

Or alternative an additional Button ... :-(

Anyway - in my opinion would that make the “Blocklist” complete. :-)

779QCAD (main)Feature RequestLowTurning detailed view on/offAssigned
0%
2 Task Description

My system: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz and 8 GB of RAM and NVIDIA GT218 (GeForce 210)

For a normal drawing displaying it in all detail is a good thing and the performance of my quad-core system is more than adequate.

But I discovered (or rather experienced) that when putting a large collection of individual drawings of gears onto one big sheet (960 mm x 600 mm - preparation for laser cutting), the performance was so bad that I had to wait several seconds (>10 sec) for each step in the process of arranging all the parts on the layer.

Request: It would be a big help and performance booster if you could disable the detailed view of each part/layer and only draw a rectangle to visualize the outline of the part.

Please take this in consideration. Attached you find an example of how that could look like. (Actually when pasting a drawing from the clipboard you already do that.)

784QCAD (main)Feature RequestLowTurn text into hatched polylinesAssigned
0%
2 Task Description

Would it be possible to add a feature which turns selected text into solid fill hatched polylines?

That would make it possible to migrate the drawing from one computer system to another without having to worry whether the used font is installed on both systems, like when sending a drawing to a manufacturer for laser engraving.

Right now I can do it by hand, letter by letter, and that is a rather labour-intensive task.

1027QCAD (main)Feature RequestLowRectangle with a 3 point determination ...Assigned
0%
2 Task Description

Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.

We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.

My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.

1. First point: start

2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle

3. third point: determination second side (height?)

I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...

1093QCAD (main)Feature RequestLowEdit Layer attributes by double-clicking on entry in la...Assigned
0%
2 Task Description

When double clicking on an entry in the layer list just nothing happens.
I would prefer if this would directly open the layer attributes dialog to change color/name etc.

1106QCAD (main)Feature RequestLowAdd support for wipeoutsAssigned
0%
2 Task Description

Wipeout entities can be used to hide rectangular or polygonal sections of a drawing, for example to make space for a label inside a hatch.

1112QCAD (main)Feature RequestLowGradientsAssigned
0%
2 Task Description

I would very much like to ask for the option to Hatch/Fill with a gradient of one or two colours.

Many Thanks

Clive

Showing tasks 51 - 100 of 382 Page 2 of 8 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing