|
2374 | QCAD/CAM | Feature Request | Low | Add Spindle Speed to Toolpath Dialog | Assigned | |
1 |
Task Description
When editing an existing toolpath to update the parameters of the selected tool, we can update the Feed Rate and the Plunge Rate, but I couldn’t find any way to update the Spindle Speed.
Even when using the Edit Tool KE button, we can edit parameters of the tool on concern but none of the modification is applied to the current Toolpath because as I see, tools parameters are copied fron tools definitions to a Toolpath only at creation of this Toolpath, but Toolpath are not updated accordingly.
Could you please add an edit field for Spindle Speed in the CAM Profile Toolpath window?
Many thanks’, and best regards.
|
|
2371 | QCAD (main) | Suggestion | Low | Include more properties for polylines in the Selection ... | Assigned | |
1 |
Task Description
Andrew,
Not OS or Version depending.
We can’t filter on some specific properties of polylines.
Handy would be: - Global Width - Orientation
Specific: - Polyline Pattern But I don’t really search for them ... For some post-op I just need them all to be set to ‘No’. - # of vertices Filtering the complex from the more simple ones. - Including Bulges or not To seperate polylines with arc segments form others. There some operations that don’t really work with bulging. - Z values and/or global Z This would make sense for some but filtering on Z is not common under QCAD as it is 2D.
Regards, CVH
|
|
2370 | QCAD (main) | Feature Request | Low | Retain global width / segment widths when reversing pol... | Assigned | |
1 |
Task Description
Andrew,
Changing orientation of a polyline with RV or by changing it in the Property Editor clears the global width value.
Single line pieces as polyline default to CCW. Still the global width is cleared when trying to set them CW.
I didn’t update since 3.27.0 but reading this topic I suppose it still is valid. Related: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9362
Regards, CVH
|
|
2354 | QCAD (main) | Feature Request | Low | copy-paste between two QCAD instances | Assigned | |
2 |
Task Description
Hello,
I’ve quite often the task to transfer changes from one set of drawings to another (similar) set. My ideal setup would be to open one set in one window and the other set in another window. Both windows would be arranged side-by-side (larger monitor). Changes would be copy-pasted from one set to the other.
From #2352 I’ve learned that there is a command-line option to achieve this.
Unfortunately it’s not possible to copy-paste between these instances.
And yes, it’s important to do this in two windows to see both versions at the same time. So, tabs are not the answer.
It’s also ok if i could detach a tab from one instance and arrange it aside of the main window (like the property editor). Than all data transfers would happen inside the same instance.
Best regards, Klaus
|
|
2353 | QCAD (main) | Feature Request | Low | add theme folder to a local shared path | Assigned | |
5 |
Task Description
Would it be possible to add Qcad’s theme folder to the local shared path, for example this would be /home/username/.local/share/QCAD/QCAD/themes for Linux. I know this works well for line types and would be extremely helpful for themes.
|
|
2351 | QCAD (main) | Feature Request | Low | File Thumbnail Preview | Assigned | |
1 |
Task Description
Could we please implement the ability to display file contents in the file explorer. This would make it easier to decide which files to open.
|
|
2348 | QCAD (main) | Bug Report | Low | text in simple format do not save position after save t... | Assigned | |
1 |
Task Description
How to reproduce the bug: 1-open a new file 2-select text tool, simple text(one line,no formatting) and alignment in base-left 3-write some text in somewhere position in the draw, repeat this in others positions 4-save the file in .dxf R15 [2000/LT2000] (dxflib) format 5-close Qcad 6-open the saved file, the writhed text lose original position and now all the text have 0,0 position
|
|
2347 | QCAD (main) | Bug Report | Low | Modify / Clip to rectangle issue | Assigned | |
1 |
Task Description
The tool “Clip to rectangle” / “Cut at Area Boundary” tool used on an area with lines and arcs will partly complete arcs to circles.
|
|
2341 | QCAD (main) | Feature Request | Low | manage image references | Assigned | |
1 |
Task Description
QCAD. ver. 3.27.1.0 (3.27.1) Qt version: 5.13.2 Architecture: x86_64 OS Windows 11
It might be useful to have the possibility to manage the references of the images contained within the drawing. A design could use recurring images, stored in a folder outside the one in which the design is located. Moving the drawing or folders (or changing the PC) will lose the folder references and the images are not displayed when the drawing is opened again. I imagine the possibility to view the references of the images (and if necessary modify manually or with a pointer) with the option of: attach, detach, reload, etc., as in the example below (referred to ActCad - based on Intellicad technology)
|
|
2340 | QCAD (main) | Feature Request | Low | Layer List / Block List: Link minus icon to keyboard de... | Assigned | |
|
Task Description
Referring to Layer List / Block List: It would improve the workflow if the Delete key on the keyboard would be linked to the minus icon (Delete). The command ER is also ignored in both list.
|
|
2339 | QCAD (main) | Feature Request | Low | Block List multible selection | Assigned | |
|
Task Description
It would be nice to have the possibility to select multiple blocks with Shift and/or CTRL + mouse like the Layer List to use a delete etc command on all selected blocks at once.
|
|
2338 | QCAD (main) | Feature Request | Low | Show non-QCAD custom XDATA optionally | Assigned | |
1 |
Task Description
QCAD (before version 3.27?) used to show some custom XDATA, e.g. tag 1000, even for application names that are not “QCAD”, which for me was useful, so it’s somewhat of a regression. (I think it was broken when selecting multiple items, maybe that’s why it was removed.)
I suggest to bring that feature back, but maybe show it only when a single element is selected if that’s easier.
(As a workaround/hack I guess it would be possible to rewrite the required information as QCAD compatible XDATA externally I guess.)
|
|
2337 | QCAD (main) | Feature Request | Low | Distance information should be available in 2D and 3D | Assigned | |
|
Task Description
As per https://qcad.org/rsforum/viewtopic.php?f=32&t=9089, I suggest to extend the distance information tools:
* show Delta Z (at least when any of the elements has Z information) * allow switching between 2D and 3D distance * maybe allow to show both * maybe change the text to distinguish between them (”Distance” → “Distance 2D/3D”)
|
|
2336 | QCAD (main) | Feature Request | Low | Add command to go back to previous nested block | Assigned | |
|
Task Description
“em” just always goes back to the main drawing. But for nested blocks, when jumping from edit mode of one block to the next nested block, it would be helpful to have some “ep” to go back to the previous block.
This was discussed at the forums...
|
|
2331 | QCAD/CAM | Feature Request | Low | Tabs: Control over on which particular profile used. | Assigned | |
|
Task Description
Currently if I position one Tab (KT) to stacked profiles QCADCAM will use it on ALL in Z matching profiles. Practically in most cases would be to use tabs only on the lowest profile.
It would be nice to have some kind of control on which profile a tab has to be used.
|
|
2330 | QCAD/CAM | Feature Request | Low | Toolpath optimization optional (on/off) | Assigned | |
2 |
Task Description
Please refer to: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9033
|
|
2325 | QCAD (main) | Bug Report | Low | dwg file crashes QCAD | Assigned | |
|
Task Description
Regarding to forum post: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8982&p=35836#p35836
dwg loaded in 3.27.1 frees QCAD (no response) and a Win10 PC. Same drawing loaded in 3.26.0 causes no problems. It looks to me that two hatches (handle 198b6, 198ba) are the culprits. Drawing saved without those hatches opens without any problem in 3.27.1.
TECNOFLEX symbol library.dwg = original file from forum post TECNOFLEX symbol library_mod.dwg = my modification
|
|
2316 | QCAD (main) | Feature Request | Low | Modify > Detect Duplicates: implement for infinite line... | Assigned | |
1 |
Task Description
Headline should already explain the issue ...
|
|
2315 | QCAD Community Edition | Bug Report | Low | Crash after ~10-th times move Spline nodes | Assigned | |
|
Task Description
1. Create spline 2. Move spline nodes. After ~10 times move qcad is crashed with backtrace: Thread 9 “Thread (pooled)” received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fff56dc9640 (LWP 8224)] 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848) at /usr/include/qt5/QtCore/qlist.h:492 492 current→v = new T(*reinterpret_cast<T*>(src→v)); (gdb) bt #0 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848)
at /usr/include/qt5/QtCore/qlist.h:492
#1 QList<QSharedPointer<RShape> >::detach_helper (alloc=<optimized out>, this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:835 #2 QList<QSharedPointer<RShape> >::detach_helper (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:849 #3 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178 #4 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178 #5 0x00007ffff686182a in QList<QSharedPointer<RShape> >::end (this=<optimized out>, this=<optimized out>) at /usr/include/qt5/QtCore/qlist.h:342 #6 QList<QSharedPointer<RShape> >::last (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:364 #7 RSpline::appendToExploded (this=0×555557311510, line=...) at math/RSpline.cpp:964 #8 0x00007ffff6867059 in RSpline::getExploded (this=0×555557311510, segments=1457293328) at math/RSpline.cpp:919 #9 0x00007ffff686682a in RSpline::getLength (this=this@entry=0×555557311510) at math/RSpline.cpp:1026 #10 0x00007ffff6c11490 in RSplineData::getLength (this=<optimized out>, this=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineData.h:178 #11 RSplineEntity::getProperty (this=0x5555573114a0, propertyTypeId=..., humanReadable=<optimized out>, noAttributes=<optimized out>,
showOnRequest=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineEntity.cpp:253
#12 0x00007ffff67cc214 in RPropertyEditor::computePropertyValue (ccProp=...) at /usr/src/debug/qcad-3.27.0.0/src/core/RPropertyEditor.cpp:574 #13 0x00007ffff67d298f in QtConcurrent::FunctionWrapper1<void, RProperty&>::operator() (u=..., this=0x555557757f18)
at /usr/include/qt5/QtConcurrent/qtconcurrentfunctionwrappers.h:80
#14 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIteration (it=..., this=0x555557757ee0)
at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:68
#15 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIterations (this=0x555557757ee0,
sequenceBeginIterator=..., beginIndex=<optimized out>, endIndex=15) at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:77
#16 0x00007ffff67d2c9d in QtConcurrent::IterateKernel<QList<RProperty>::iterator, void>::forThreadFunction (this=0x555557757ee0)
at /usr/include/qt5/QtConcurrent/qtconcurrentiteratekernel.h:255
#17 0x00007ffff44b5b2d in QtConcurrent::ThreadEngineBase::run (this=0x555557757f20) at qtconcurrentthreadengine.cpp:302 #18 0x00007ffff59c8d52 in QThreadPoolThread::run (this=0x555556198b10) at thread/qthreadpool.cpp:100 #19 0x00007ffff59c5a61 in QThreadPrivate::start (arg=0x555556198b10) at thread/qthread_unix.cpp:329 #20 0x00007ffff546c717 in start_thread (arg=<optimized out>) at pthread_create.c:435 #21 0x00007ffff54f018c in clone3 () from /lib64/libc.so.6 (
|
|
2308 | QCAD (main) | Feature Request | Low | Viewport Scale Field | Assigned | |
|
Task Description
It would be helpful if the scale field that appears while placing a viewport would also re-appear when the viewport is selected after it’s already been placed in the layout. It would also be helpful if the pre-populated values in the dropdown matched those in the global layout scale field.
|
|
2307 | QCAD/CAM | Feature Request | Low | Tools to create dogbones or corner overcut | Assigned | |
2 |
Task Description
The inside corners of profile tool paths have rounded inside corners. This occurs because the rounded outside the bit cannot make it all the way into the corner of the feature. Think of tracing the inside wall of a cardboard box with a can of soup. The can makes direct contact with the box walls, but its round shape is unable to completely fit into the tight corners— there’s always a gap.
In a dog-bone overcut (see the figure in attachment), the inside profile corner is enlarged into a semicircle, allowing the sharp edges of the mating piece to slide through without interference.
When a dog bone is applied to the inside corners, as shown in the second figure in the attachment, the joints fit together nicely!
The following website explains what should be implemented More elegant CNC dogbones
There are two ways to implement this tool. Either you modify the original design (as implemented in Fusion 360) or you can do it at the moment you define the tool path (Estlcam allows you to do this for example). See the feature Corner overcut, on Estlcam website
|
|
2301 | QCAD (main) | Feature Request | Low | Rotate preview on/off | Assigned | |
1 |
Task Description
Hi,
I believe prior QCAD version 3.22.0.0 there was no rotating preview. The rotating preview shows the outcome regarding to the chosen center point. I know that it is also common for move/copy. However, for me it is very confusing and difficult to chose the correct center point for a rotation if I’m constantly been distracted by the most of the time overlapping preview of my selection. This said if the drawing is very detailed I have to zoom in extremely to be able to snap to the right entity. That wouldn’t be necessary without the preview. Additional rotate a large drawing selections will compromise the performance - CPU is going like crazy.
It would be nice to have an option to turn this preview on/off.
|
|
2300 | QCAD (main) | Feature Request | Low | Duplicate layout blocks with contents | Assigned | |
2 |
Task Description
Add a tool to duplicate a layout block with contents.
|
|
2299 | QCAD (main) | Feature Request | Low | Add support for multi line attributes | Assigned | |
2 |
Task Description
Multiline attributes can contain linefeeds and formatting like MTEXT.
|
|
2296 | QCAD (main) | Feature Request | Low | Custom font type and size for command line widget | Assigned | |
|
Task Description
Would be nice to change default font type and size for command line widget.
|
|
2295 | QCAD (main) | Feature Request | Low | Deselect all with Escape key | Assigned | |
|
Task Description
I’m used to have persistant selection while drawing (Application Preferences > Graphics View:Appearance > Selection), but I’m missing deselection of all objects with ESC key. I have seen the option to deselect with right key, but it’s nice to have right key for context menu.
Currently ESC key cancels current active command, but would be nice if there is no command active to also deselect all features by default.
|
|
2294 | QCAD (main) | Feature Request | Low | Auto Zoom with middle mouse button | Assigned | |
|
Task Description
I tried to assign double click on middle-mouse button to zoomauto command, but it seems it’s not possible currently.
Would love to see this feature.
|
|
2293 | QCAD (main) | Feature Request | Low | insert attributes into a point element | Assigned | |
1 |
Task Description
Would it be possible to extend the tool for importing points with a label so that when importing points into the drawing (as it is now), the attributes of the point are taken from the csv file and written to the point’s own properties? See attachment. This would extend the functionality of the tool and I assume that it would also lay the foundation for the possible re-export of such points from the drawing to a csv file, including all the details.
|
|
2289 | QCAD (main) | Bug Report | Low | Vertical Line Tool stops accepting input | Assigned | |
|
Task Description
When using the vertical line tool, you can enter a length value in the options toolbar, then place the line. If you want to change the length, you just need to enter a new value and the length field will update. However, there seem to be cases where after 10-20 entries, the focus goes off the length field in the options toolbar, requiring the user to bring focus back to continue. I could not seem to duplicate this behavior with the horizontal line tool.
|
|
2288 | QCAD (main) | Feature Request | Low | Layer State Widget | Assigned | |
3 |
Task Description
The option of a layer state widget would be a nice way to see and select between different layer states.
|
|
2284 | QCAD (main) | Bug Report | Low | Zooming in & out causes grid/snap scale value change in... | Assigned | |
1 |
Task Description
I have set the grid/snap value to X=.0625 Y=.0625 on all 4 viewports. When zooming in and out the grid/snap scale changes from .0625 to 3.90625. at this point the grid/snap points differ, This causes a variation in the grid/snap reference points lending to drawing errors.
example When I use the grid settings defaults .01, when zooming in and out, the grid/snap scaling doesn’t seem to have this issue. Other values do, See below.
set value first zoom second zoom next zoom
point point point ...
0.01 0.1 1.0 10.0 ... 0.02 0.04 0.4 4.0 ... 0.04 0.16 1.6 16.0 ... 0.05 0.25 2.5 25.0 ... 0.0625 0.390625 3.90625 39.0625 ... 0.0254 0.64516 6.4516 64.516 ...
Why is there a squaring of the original set value? Which then becomes a new zoomed grid/snap value?
QCAD Professional Version: 3.26.4.0 (3.26.4) Internet: QCAD.org Build Date: Jun 3 2021 Revision: 0bb4334 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
|
|
2282 | QCAD (main) | Feature Request | Low | Add a "Save As" command while editing blocks in place | Assigned | |
1 |
Task Description
As a heavy mechanical drawings user, it would help a lot to have an option to exit a block saving as a new name and making it a new entity from that time ahead.
Example: if a have a lot of screws, one of then is behind another peace and need the to have some lines changed to hidden style lines, in the flow of the work is great if I edit that screw in place and when exiting have the option to save as a new block, to don’t mess with other entities of the same block that I don’t want to change. Yes, there is a workaround that is duplicate and rename the block prior to the editing, but a save as seems to work easier.
Thanks Andrew and team!
|
|
2272 | QCAD (main) | Feature Request | Low | Support unit "US survey foot" | Assigned | |
|
Task Description
In the US, it is (unfortunately) still common to use US survey foot. It seems at least some DXF applications/libraries support this unit as a $INSUNITS value, some references:
There are two issues regarding this with QCAD:
If you open a document with $INSUNITS being 21, it’s reset to 0 (unitless/unspecified) when saved again, even when not changing anything.
It is not possible to select these units in the GUI.
I don’t know about standardization of these values, but my hope is that it’s at least possible to preserve the unit in an existing drawing. Given that this unit is supposed to be obsolete in some years, it might seem less important, but due to this transition, it might get even more important to be able to distinguish between units. Thanks!
|
|
2271 | QCAD (main) | Bug Report | Low | Unpredictable Crashing on Mac M1 Arm64 | Assigned | |
|
Task Description
I am getting random crashing on my MacBook M1 chipset while using QCAD Pro. There is nothing in particular that you can do to replicate as the crashing is completely inconsistent. Have had it crash when pressing escape while using measurement tool, but have also had it crash while using the app and selecting a tool.
Included crash report, which has also been sent to Apple.
Thanks
|
|
2266 | QCAD (main) | Bug Report | Low | Crash while creating an angular dimension | Assigned | |
|
Task Description
no task description |
|
2264 | QCAD (main) | Bug Report | Low | Hatching segment selection stops at entity - hatch patt... | Assigned | |
1 |
Task Description
QCAD Professional Windows7 pro WinInstaller Version: 3.26.4.5 (3.26.4.5) Internet: QCAD.org Build Date: Jul 20 2021 Revision: e596276 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
In the example given by ‘turtle’ .. why_is_this_not_closed-v2.dxf https://www.qcad.org/rsforum/viewtopic.php?f=32&p=34157#p34153
Selecting hatch boundary segments of the horizontal polyline segment at (1169.933593;274.432562)-(1089.933593;274.432562)
Segment selection stops where the AR-CONC hatch pattern touches the horizontal segment. Such intersections points where already no longer regarded as snappoints. See :
FS#2090 : https://www.qcad.org/bugtracker/index.php?do=details&task_id=2090. Related topic https://www.qcad.org/rsforum/viewtopic.php?&t=7340&p=28414#p28414
Regards, CVH
|
|
2252 | QCAD (main) | Bug Report | Low | Freeze / crash when selecting clamped splines (not crea... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8531
|
|
2242 | QCAD (main) | Suggestion | Low | Bill of Materials | Assigned | |
4 |
Task Description
It would be a very interesting feature to add to future versions.
I also use AutoCAD Mechanical 2012 and the BOM is synced with every balloon on the drawing. Making it easy to edit.
The core BOM accepts formula fields and we can easily calculate the mass of a part, with some Ifs and math.
The BOM that is shown in the actual drawing is more simplistic, and has just Part number, Quantity, Mass and the Description. But it’s related to the “core BOM”.
It’s a very interesting thing! It would be great on QCad.
|
|
2233 | QCAD/CAM | Feature Request | Low | More selection options to select sheets for nesting | Assigned | |
|
Task Description
I’m often in the situation that I have to select for nesting 50+ sheets. Currently is only a Shift + left mouse click selection possible. It would be nice if QCAD/CAM could get for the nesting / sheet selection additional a mouse rectangle area selection.
|
|
2229 | QCAD (main) | Feature Request | Low | Property Editor, option format property values as decim... | Assigned | |
|
Task Description
Angle Display is decimal although the decimal display is disabled in Application Preferences.
Format should be 17° 31’ 52” instead of 17.531111.
|
|
2227 | QCAD (main) | Feature Request | Low | CAM > CAM Export: post processor for tangential knife c... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=2&t=8342
|
|
2216 | QCAD (main) | Suggestion | Low | DIM modification cause overlapping text | Assigned | |
1 |
Task Description
When I modify partly a DIM with “Stretch” or changing one Extension line position with drag and drop the Value text is updated which is nice working. Unfortunately the previous value stays in place and is overwritten by the actual value. I think for a good readability the previous value should disappear in the moment when the new value is presented.
|
|
2213 | QCAD/CAM | Feature Request | Low | Allow editing Spindle Speed separately for each Toolpat... | Assigned | |
1 |
Task Description
Hello dear CAM developers!
I need to use the same tool at different spindle speed in a single machining file. I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)
FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal. I need to be able to do both engraving and cutting in a single file. Alas! this laser tool is defined with a fix and unique number (99). Therefore I cannot define different laser tools with different speeds.
Many thanks Best regards.
|
|
2205 | QCAD (main) | Bug Report | Low | Text rendering fails in certain zoom level | Waiting on fix in 3rd party library | |
1 |
Task Description
Case: Drawing with text, zoom in and out with one of the common methods, text will disappear in certain zoom level
Same drawing zoomed in and out in 3.20.0.0 doesn’t show this effect - works just fine.
|
|
2195 | QCAD (main) | Feature Request | Low | Saved views include memory of block | Assigned | |
1 |
Task Description
When saving a view, it would be great if the view also saved which block (model space, layout block, or any other block) that was active at the time the view was saved and when the view is later re-activated, the corresponding block would re-activate.
|
|
2192 | QCAD (main) | Feature Request | Low | Add "Define angle using mouse cursor" to Move and Rotat... | Assigned | |
2 |
Task Description
The “Define annge using mouse cursor” of the Rotate tool would be useful in the Move and Rotate Tool
|
|
2191 | QCAD (main) | Feature Request | Low | Extend the functionality of the Reorder tool | Assigned | |
3 |
Task Description
Add functions to the Reorder tool, similar to the functions of the counter tool, undo last step and start at any number, allowing corrections and restarting the tool part way through.
See the discussions at https://qcad.org/rsforum/viewtopic.php?f=32&t=8170
|
|
2189 | QCAD (main) | Feature Request | Low | Vertically and/or diagonally stacked fractions option. | Assigned | |
2 |
Task Description
The option for vertically and diagonally stacked fractions would be helpful for both the text creation tool and as the output of dimensions.
|
|
2182 | QCAD (main) | Feature Request | Low | Select > Select Previous | Assigned | |
3 |
Task Description
Select the previously selected entities.
|
|
2178 | QCAD (main) | Bug Report | Low | Stored Color of text dimension changes | Assigned | |
1 |
Task Description
QCAD Pro 3.25.2.7 Win7 Wininstaller 32bit Related Topic: https://www.qcad.org/rsforum/viewtopic.php?&t=7954
Reported is that black is saved as #00004c (dark blue) Radek (iMac (Retina 5K, 27-inch, 2017), Catalina 10.15.7 (19H114)
My system/installation saves black as #4c000 (dark red)
When using single primary colors these get reduced to #4c, #7f, #99, #cc & #ff. The threshold for that are #00, #65, #8b, #b2 & #e5 See: DimColorScale (png & dxf)
8 standard CAD colors fail saving correct Black (something with #4c) Dark Red, Dark Green, Dark Blue, Dark Cyan, Dark Magenta, Dark Yellow (#80 turns #7f) & Gray (#adadad instead of #a0a0a4)
As with Gray, when mixing the 3 colors it gets rather fuzzy ... #505050 & #555555 both turn #5b5b5b & #464646 turns #4c4226
A snippet of my investigation is included in the topic (45 files in a ZIP)
CVH
|