|
1903 | QCAD (main) | Feature Request | Low | Saving layer settings, e.g. visibility status, associat... | Assigned | |
1 |
Task Description
In a medium complex drawing it may be too much details to have all layers in a drawing visible at once.
Instead a number of views would be created that saves not only zoom level and position but also what layers are visible and not (as appropriate for the purpose of that particular view). This is very cumbersome (to the extent it is not really realistic) to achieve today and requires a lot of duplication of both model and layers.
The advantage of adding this is the ability to have only one model (with multiple views) and avoid duplication of work and the risk of inconsistency inherent with many copies of the model.
As a further (and natural extension to this) would be the ability to used this functionality with view-ports to be able to create (possibly many) paper-spaces from a single model. This would however require view-ports to be aware of what view they are a window into. A single change in the model would then propagate to all defined view-ports and paper-spaces.
|
|
1902 | QCAD/CAM | Feature Request | Low | CAM G-Block Toolpath | Assigned | |
|
Task Description
Hallo Andrew,
Still busy on the never ending G-code story. Urgently needed the very handy G-code Block Toolpath. This ‘toolpath’ also solves a lot of “editing requests”.
|
|
1901 | QCAD/CAM | Feature Request | Low | CAM Traverse Toolpath | Assigned | |
|
Task Description
Hallo Andrew,
Still busy on the never ending G-code story. Urgently needed the very common Traverse Toolpath.
Example added as pdf.
Greetings
|
|
1895 | QCAD (main) | Feature Request | Low | Add support for block transformation matrices | Assigned | |
|
Task Description
Support transformations by transformation matrix for block references.
See also: https://www.qcad.org/rsforum/posting.php?mode=reply&f=33&t=6333
|
|
1890 | QCAD (main) | Feature Request | Low | Possibility to address an QCAD extern font folder | Assigned | |
|
Task Description
Like the Library Browser it would be nice to be able to define a extern font source folder. Especially now after we are able to create our own cxf fonts with QCAD.
The reason is the same why we have it already for the library - without it we have to copy our individual fonts manually every time after a QCAD update to use them uninterrupted for existing and new drawings.
|
|
1888 | dwg2bmp | Feature Request | Low | Add support to disable hatch rendering on "dwg2bmp" | Assigned | |
1 |
Task Description
Hi!
A friendly request to add an option to disable hatch rendering on “dwg2bmp” conversions.
Depending on the nature of the conversion and the density of the hatch, this may render unintelligible images (see attachments). The option could look like “-t, -nohatch” to indicate hatches should be hidden before rendering. This could potentially become an option too for “dwg2svg” or “dwg2pdf.”
Amazing product, thank you so much!
|
|
1887 | dwg2bmp | Feature Request | Low | Add "-max-lineweight" option for dwg2bmp | Assigned | |
2 |
Task Description
Hi there,
A friendly request to add the option to set a maximum lineweight for raster conversions via dwg2bmp.
Depending on the LW configuration of the CAD file, rasterization operations sometimes yield terrible results (see attachment). This would also mirror the similar “-min-lineweight” options available on “dwg2svg” and “dwg2pdf” (although not on “dwg2bmp”).
See also: https://qcad.org/rsforum/viewtopic.php?f=32&t=6298
Thanks!
|
|
1886 | QCAD (main) | Feature Request | Low | Support advanced tolerance settings for dimensions | Assigned | |
2 |
Task Description
Add support for - tolerance display (dimtol) - upper limit (dimtp) - lower limit (dimtm) - tolerance precision (dimtdec) - tolerance text size factor (dimtfac) - tolerance suppress zeros, etc.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6269
|
|
1878 | QCAD (main) | Feature Request | Low | Snap > Distances from 2 Points: snap to point with give... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/posting.php?mode=reply&f=32&t=6211
|
|
1877 | QCAD/CAM | Feature Request | Low | Post Processor Tutorial | Assigned | |
|
Task Description
Hallo Andrew,
I am still busy on the never ending G-code story. Doing so I wrote a small Post Processor Tutorial for all those nerds who wants to write their own. If you like it you might add it to QCAD. However, since English is not my native tongue I suggest checking it would be wise.
Meanwhile I have downloaded the source code, and could not find the CAM’s Drill-path-script. I am now using a negative Drill Cut Depth to set a Laser Dwell time, were as a field “Dwell Time (in seconds)” in the Drill-path would be more appropiate. Is this script open source available or is it part of ‘closed part’ of QCAD?
|
|
1870 | QCAD (main) | Feature Request | Low | Stretch tool / option to turn selection restriction on... | Assigned | |
|
Task Description
Hi,
since 3.19.2 the Stretch tool looks for any selection and follows the specification “Only stretch selected entities if there is a selection”.
That is a nice feature but it leads many times to confusing because I have to deselect a selection just because I need to use the stretch tool on something else on the fly. The same if I “forgot” a selection outside of my zoom which is still important for me. The stretch tool just won’t work without any message why not. My routine now is that I terminate every selection just before I use the stretch tool just not to be surprised by “why isn’t it working”?
It would be nice to have in the Stretch option bar a checkbox to turn the “only selection feature” on or off. QCAD should remember that setting.
|
|
1863 | ECMAScript | Feature Request | Low | WidgetFactory.saveState: save state of checkable QGroup... | Assigned | |
|
Task Description
QGroupBox widgets with <property name=”checkable”> are not saved in Qcad3.conf
|
|
1851 | QCAD (main) | Suggestion | Low | Lateral surface of a cone | Assigned | |
|
Task Description
Module mise à plat d’un cone
Bonjour,
Serait il possible dans un futur d’ajouter un module de mise en plan de cone.
Une petite fenêtre sur lequel on donne par exemple : 1- Ø haut 2- angle de coupe du haut 3- hauteur du cône 4- Ø bas 5- angle du bas 6- épaisseur matière
Ce qui permettrai de sortir une mise en plan a plat de la forme
|
|
1847 | QCAD/CAM | Bug Report | Low | BUG MEMORY | Assigned | |
|
Task Description
Hi Andrew,
Still working on creating HPGL.PLT toolpaths for the HP7580 pen plotter. QCAD has some trouble creating toolpaths. Too often it shuts itself down, or the PC gets stalled.
Recreating the same error however is possible
|
|
1846 | QCAD/CAM | Feature Request | Low | Toolpath preset offsets | Assigned | |
|
Task Description
Hi Andrew
A request for adding some fields to the toolpath
|
|
1844 | QCAD/CAM | Feature Request | Low | HP/GL (PLT) import | Assigned | |
|
Task Description
Hi Andrew
QCAD/CAM misses a hpgl.plt import. If gerber and G-code can, so should plt.
|
|
1843 | QCAD/CAM | Bug Report | Low | Creating ToolPath Stalls | Assigned | |
|
Task Description
Hi Andrew,
Still working with and on CAM HPGL for the HP7580 pen plotter.
I have added a penplotter test drawing, that might be used for testing en callibrating plotter and pens. You may add it to the Examples-directory.
QCAD has a lot of trouble creating toolpaths and exports. Much too often it shuts itself down, or gets stalled. Why? I am not sure.
|
|
1841 | QCAD/CAM | Feature Request | Low | QCAD/CAM Postprocessor "Hpgl": Add pen colors to HP/GL ... | Assigned | |
|
Task Description
Add SPx; with x being pen number from 1-8.
TODO: - Which color corresponds to which pen number? - What if there are more than 8 colors in a DXF files?
|
|
1838 | QCAD (main) | Feature Request | Low | Carbide Create import | Assigned | |
|
Task Description
Add support for importing Carbide Create files (.c2d).
Format is JSON based, human readable.
|
|
1837 | QCAD (main) | Feature Request | Low | Line bisector tool | Assigned | |
1 |
Task Description
Hi,
we have already this nice tool “Angle bisector”.
I would really appreciate if we could get the same function for parallel lines to place a line exactly in the center of both lines.
Thanks.
|
|
1836 | QCAD (main) | Feature Request | Low | Offset for paste along entity | Assigned | |
|
Task Description
add a new parameter “offset” in the dialog “Paste along entity”
see https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22307#p22307
|
|
1833 | QCAD (main) | Feature Request | Low | Deep synchronize attributes feature | Assigned | |
1 |
Task Description
There is the Synchronize attributes feature which works well. But It affects only block references in the active layout(modelspace, block layout). If I want to synchronize attributes of block references in in another blocks, i have to manually go through all blocks and run synchronize attributes feature. That is the reason I would like to modify Synchronize attributes feature to affect all block references in a drawing, or add new Deep synchronize attributes feature.
|
|
1827 | QCAD (main) | Feature Request | Low | Property Editor: Accept advanced scale expressions for ... | Assigned | |
|
Task Description
Hi,
Identical scale expression used in Print Preview like 5:1, 5/1, 5”=1”, 5 are working flawless like expected. Same expression used in a Viewport scale leads to different outcomes.
The Property Editor used to fix that in Paper_Space does also not accept those standard expressions.
|
|
1826 | QCAD (main) | Feature Request | Low | guide lines when extending lines | Assigned | |
|
Task Description
When using the SHIFT key while dragging the end point a perpendicular guide line is displayed (see attached screenshot). It would be very helpful if other guide lines with x=const. and y= const. are displayed when pressing SHIFT + ALT key together while dragging.
|
|
1824 | dwg2pdf | Feature Request | Low | dwg2pdf does not obey frozen layers in paper-space view... | Assigned | |
|
Task Description
We currently have a paper-space using two viewports with different layers from the model-space frozen. Unfortunately in the pdf output the layers which are frozen show up. dwg2pdf should obey the specific frozen layer for each viewport
|
|
1823 | dwg2pdf | Feature Request | Low | plotting error to pdf a Dwg where the view port is not ... | Assigned | |
|
Task Description
When trying to plot a dwg or a dxf to pdf where the viewport is orientated to a different angle than north up the data in the view port is plotted north up. see attached DWG and pdf for clarification.
|
|
1815 | QCAD/CAM | Feature Request | Low | Add Laser tool option | Assigned | |
|
Task Description
Hi Andrew,
Creating G-code for cnc-laser, the laser-tool can not be correctly set at all.
Attached a laser tool proposal
|
|
1811 | QCAD (main) | Feature Request | Low | Zoom 1:1 | Assigned | |
2 |
Task Description
It would be nice to be able to adjust the zoom factor so that the scale on the screen matches a ruler which I lay on the screen.
Thanks!
|
|
1810 | QCAD (main) | Feature Request | Low | Change icons from black on white to white on black depe... | Assigned | |
1 |
Task Description
Automatic change of icons in the Library Browser from black on white to white on black or vice versa depending on the background (white or black; light or dark) in QCAD main window. See also https://www.qcad.org/rsforum/viewtopic.php?f=31&p=21970#p21970
|
|
1801 | QCAD (main) | Performance Issue | Low | low perfomance in paper space and viewports | Assigned | |
|
Task Description
Improving the performance of the exceptional use of the processors when switching from the model to the paper space (testing with the attached file) the functionalities of the commands for the viewports are too low in the paper space.
|
|
1789 | QCAD (main) | Suggestion | Low | Application Preferences / General / Performance :0 | Assigned | |
1 |
Task Description
Hi Andrew,
we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.
I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.
Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.
Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.
Just my two cents. ;)
|
|
1772 | QCAD (main) | Feature Request | Low | Go back on right-click on shaded Tool button | Assigned | |
|
Task Description
Right-click on the tools on the left-hand side of the screen brings you back in the hierarchy.
However, that does not work if you right-click while hovering above a button that that is shaded (inactive).
|
|
1755 | QCAD (main) | Feature Request | Low | Selecting standard rotation angles by mouse click for M... | Assigned | |
1 |
Task Description
This would be nice. It will save a lot mouse - keypad changes for me.
|
|
1754 | QCAD (main) | Suggestion | Low | When Selecting multiple blocks that contain the same at... | Assigned | |
|
Task Description
When selecting multiple blocks that contain the same attribute names, attribute properties appear with the values of the last selected block instead of “various”. I do not know if this is a “bug” or developer option, but “various” would be better in my opinion.
|
|
1740 | QCAD (main) | Suggestion | Low | Make unprintable layers also hidden in print preview | Assigned | |
|
Task Description
Make unprintable layers also hidden in print preview
|
|
1731 | QCAD (main) | Feature Request | Low | Option to place text to other side | Assigned | |
|
Task Description
Hi Andrew,
It would be good to have an option to be able to place the text to the left or right,maybe just a simple check box? please see attached screenshot to explain. In this instance (and I have to do this a lot ;)) I had to explode the dimension entity and rearrange the text manually :(
Many thanks
C;live
|
|
1723 | QCAD (main) | Feature Request | Low | Detecting overlapping line / arc segments | Assigned | |
4 |
Task Description
Add a tool to detect overlapping segments or lines and arcs. Similar like the “overkill” command in other CAD systems.
|
|
1722 | QCAD (main) | Feature Request | Low | Option to insert viewport at either of the rectangle co... | Assigned | |
|
Task Description
Hi Andrew,
Currently the only option to insert a viewport is using the central insertion point, for better placement it would be useful to have an option to insert viewports at any of the four corners in addition to the centre.
Hope that makes sense.
Many thanks
Clive
|
|
1721 | QCAD (main) | Feature Request | Low | Insert table tool | Assigned | |
5 |
Task Description
Hi Andrew,
I’m not sure whether this has been added or suggested already. It would be great to have a built in QCAD table tool for producing cutting lists or bill of materials etc. A dedicated table tool would be a real boost to QCAD Pro ;)
Many thanks
Clive
|
|
1714 | QCAD (main) | Feature Request | Low | Dimension > Diametric: improve display when label is mo... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408
|
|
1713 | QCAD (main) | Feature Request | Low | Add attribute value "By Parent" for child layers | Assigned | |
1 |
Task Description
Add attribute value “By Parent” for color, line weight, line style for child layers.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5407
|
|
1705 | QCAD (main) | Feature Request | Low | Connect certain actions and layers | Assigned | |
1 |
Task Description
When dimensioning my drawings I always want the dimensions to be on the dimensions layer. When adding text I want the text to be on the text layer. When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer. When drawing a line segment it almost always is on my outline layer.
So I propose a new option to bind certain actions to certain layers. Whenever those actions are selected the layer should automatically be switched.
I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.
|
|
1702 | QCAD (main) | Feature Request | Low | Draw > Polyline: add boolean operations | Assigned | |
1 |
Task Description
Add intersection, union, difference, XOR operations for closed polylines.
|
|
1701 | QCAD (main) | Feature Request | Low | Layer List / Block List: add filter input | Assigned | |
|
Task Description
Add text filter for layer list, block list.
|
|
1700 | dwg2pdf | Feature Request | Low | dwg2pdf: output multiple layouts | Assigned | |
|
Task Description
Add support to specify multiple blocks (layouts) to output (one per page).
|
|
1699 | QCAD (main) | Feature Request | Low | Dimensioning - add option to insert text in the middle ... | Assigned | |
|
Task Description
Dimensioning - add option to insert text in the middle of dimension.
To have an option to have text aligned in the middle of the dimension line, rather than above it.
|
|
1698 | QCAD (main) | Feature Request | Low | Dimensioning - add option to split dimensions | Assigned | |
|
Task Description
Dimensioning - add option to split dimensions.
To have an option to split the extension lines if they run over other entities.
|
|
1697 | QCAD (main) | Feature Request | Low | Dimensioning - add option for horizontal text alignment | Assigned | |
|
Task Description
Dimensioning - add option for horizontal text alignment.
Basically an option in drawing preferences to align text horizontally instead of vertically.
|
|
1681 | QCAD (main) | Feature Request | Low | Auto-dimensioning | Assigned | |
|
Task Description
You can apply the command to Lines, PolyLine segments, Arcs, Circles, and Rings:
For linear entities parallel to an axis of the coordinate system, aligned Dimensions (parallel Dimensions) are created. For linear entities not parallel to an axis of the coordinate system, either aligned Dimensions (measuring the absolute distance between two points) or horizontal or vertical Dimensions (measuring the horizontal or vertical distance between two points) depending on where you move the pointer are created.
For curved entities, you can create radial, diameter, linear, angular, and arc length Dimensions.
To dimension entities:
Click Dimension > Auto (or type AutoDimension). In the graphics area, select an entity to dimension. Click to place the dimension line. To use another dimension type for Circles or Arcs, specify an option: Diameter. Creates a diameter Dimension. Radial. Creates a radial Dimension for an Arc or Circle. Linear. Creates a linear Dimension of the diameter of a Circle or an aligned, horizontal, or vertical Dimension between the end points of an Arc. Angular. Dimensions the angle between the end points of an Arc. Arc length. Dimensions an Arc length. Note: The chosen option is the default the next time you use the AutoDimension command.
When you move the pointer during a linear dimensioning, you can: Lock. Determines the current dimension type (aligned, horizontal, or vertical) regardless where you move the pointer. Unlock. Unlocks the type of linear dimension used. Press Enter.
*** In short, when you use this tool you click on an entity and it will know what dimension you’re looking for. For Circles, you can specify in the command window R or D for Radius or Diameter. This would be extremely useful on large drawings where a lot of dimensioning is to be done. One tool and start clicking on entities for dimensioning.
|
|
1678 | QCAD (main) | Suggestion | Low | Property Editor dialog | Assigned | |
|
Task Description
The line for “General properties”, “Layer” the line is too narrow, so you do not see the layer name when the Property Editor is pinned to the side. (see Forum - Suggestions and Feedback): https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5239
|