QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategory  ascTask TypeSeveritySummaryStatusProgress
2176QCAD (main)Bug ReportVery LowModify > Break out Manual: relevance of order of click ...Assigned
0%
1 Task Description

QCAD Professional
Windows 7; Win installer 32 bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Forum Topic: https://qcad.org/rsforum/viewtopic.php?t=7988
File included.
I have no intention to make 48 separate reports.

CVH

2181QCAD (main)SuggestionVery LowApply more distinguishable Enabled and Disabled state i...Assigned
0%
1 Task Description

QCAD Professional
Win7 WinInstaller 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Related forum Topic:
https://qcad.org/rsforum/viewtopic.php?t=8015

CVH

2194QCAD (main)Bug ReportVery LowMultiple selection of entities with custom properties d...Assigned
0%
1 Task Description

QCAD Professional
Win7 installer 32 bit
Version: 3.25.2.13 (3.25.2.13)
Internet: QCAD.org
Build Date: Feb 12 2021
Revision: cad2d36
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

In the file provided one would expect *VARIES* in the property editor under custom properties when selecting 2 or more entities.
The key list is reduced to what keys are common to the multiple selection. (Here 3)
The values displayed are inconsistent depending the selection.

Select All » 3 custom properties of line 3
Select the 3 vertical » 3 custom properties of line 2
Select the first vertical and the diagonal » 3 custom properties of line 1
Select all but the first vertical » 3 custom properties of line 3
And so on ...

Regards,
CVH

2011QCAD Community EditionSuggestionVery LowUpdate QCAD CE SpatialIndex module to latest versionAssigned
0%
Task Description

Building with the bundled version, 1.8.5, works fine.

When I try to build using the system version, which for Mageia Cauldron is 1.9.3, the build fails.

https://raw.githubusercontent.com/kekePower/mmbl/master/qcad/2019/12/11/20%3A13%3A48/log.qcad

Here is the current spec file for version 3.23.0.4.
https://svnweb.mageia.org/packages/cauldron/qcad/current/SPECS/qcad.spec?revision=1465894&view=markup

It looks like qcad is incompatible with versions above 1.8.5.

Are there plans to port to the new version?

Thanks in advance.

2068QCAD Community EditionBug ReportVery LowNon-english text in upper/lower index becomes UTF codeAssigned
0%
Task Description

How to reproduce.

1. Create a text field with some non-english words in the upper index. (see attached pic1.png)
2. Save the project and close QCAD.
3. Run QCAD and open same project.
4. Now upper/lower indexed text becomes not human readable UTF codes. (see attached pic2.png)

Tried different fonts - doesn’t help.

Linux ntb-kirill 3.10.0-1062.12.1.el7.x86_64 #1 SMP Tue Feb 4 23:02:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
CentOS Linux release 7.7.1908 (Core)

1815QCAD/CAMFeature RequestLowAdd Laser tool optionAssigned
0%
Task Description

Hi Andrew,

Creating G-code for cnc-laser, the laser-tool can not be correctly set at all.

Attached a laser tool proposal

1841QCAD/CAMFeature RequestLowQCAD/CAM Postprocessor "Hpgl": Add pen colors to HP/GL ...Assigned
0%
Task Description

Add SPx; with x being pen number from 1-8.

TODO:
- Which color corresponds to which pen number?
- What if there are more than 8 colors in a DXF files?

1843QCAD/CAMBug ReportLowCreating ToolPath StallsAssigned
0%
Task Description

Hi Andrew,

Still working with and on CAM HPGL for the HP7580 pen plotter.

I have added a penplotter test drawing, that might be used for testing en callibrating plotter and pens. You may add it to the Examples-directory.

QCAD has a lot of trouble creating toolpaths and exports. Much too often it shuts itself down, or gets stalled. Why? I am not sure.

1844QCAD/CAMFeature RequestLowHP/GL (PLT) importAssigned
0%
Task Description

Hi Andrew

QCAD/CAM misses a hpgl.plt import. If gerber and G-code can, so should plt.

1846QCAD/CAMFeature RequestLowToolpath preset offsetsAssigned
0%
Task Description

Hi Andrew

A request for adding some fields to the toolpath

1847QCAD/CAMBug ReportLowBUG MEMORYAssigned
0%
Task Description

Hi Andrew,

Still working on creating HPGL.PLT toolpaths for the HP7580 pen plotter. QCAD has some trouble creating toolpaths. Too often it shuts itself down, or the PC gets stalled.

Recreating the same error however is possible

1877QCAD/CAMFeature RequestLowPost Processor TutorialAssigned
0%
Task Description

Hallo Andrew,

I am still busy on the never ending G-code story. Doing so I wrote a small Post Processor Tutorial for all those nerds who wants to write their own. If you like it you might add it to QCAD. However, since English is not my native tongue I suggest checking it would be wise.

Meanwhile I have downloaded the source code, and could not find the CAM’s Drill-path-script. I am now using a negative Drill Cut Depth to set a Laser Dwell time, were as a field “Dwell Time (in seconds)” in the Drill-path would be more appropiate. Is this script open source available or is it part of ‘closed part’ of QCAD?

1901QCAD/CAMFeature RequestLowCAM Traverse ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very common Traverse Toolpath.

Example added as pdf.

Greetings

1902QCAD/CAMFeature RequestLowCAM G-Block ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very handy G-code Block Toolpath. This ‘toolpath’ also solves a lot of “editing requests”.

1911QCAD/CAMFeature RequestLowDrill ToolpathAssigned
0%
Task Description

Hallo Andrew

It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.

1913QCAD/CAMBug ReportLow3D Simulation Behaves oddAssigned
0%
Task Description

Hallo Andrew,

testing the drill toolpath I used single point markers.

In 3D simulation the tool drills the toolpath AND uses the drill as a mill.

Cam Export and generated G-code is not effected.

1940QCAD/CAMFeature RequestLowCAM > CAM Configuration: Add program descriptionAssigned
0%
1 Task Description

Add a program description to the CAM configuration dialog and export to postprocessors as variable.

See also:
https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649

1954QCAD/CAMReleaseLowRevised PWM Post ProcessorAssigned
0%
Task Description

Hallo Andrew,

I have revised the PWM Post Processor to Revision D.

1971QCAD/CAMBug ReportLowCAD/CAM 3D SimulatorAssigned
0%
Task Description

Hallo Andrew,

Found a bug in the 3D Simulator execution

2164QCAD/CAMFeature RequestLowAdd ability to pan the 3D view with a modifier key and ...Assigned
0%
1 Task Description

With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.

2167QCAD/CAMBug ReportLowComma format decimal separator fails ZSafety CAM config...Assigned
0%
1 Task Description

QCAD/CAM
Trial package Win installer 32 bit
Version: 3.25.2.0 (3.25.2)
Internet: QCAD.org
Build Date: Sep 4 2020
Revision: 4a61501
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Local decimal separator is ‘,’ (comma)
In CAM configuration .. Z Levels .. Safety level

Using nn,nnn the output is Nxx G0 Znn
Using nn.nnn the output is Nxx G0 Znn.nnn

Drop down boxes are all in dot format.
Didn’t try anything else yet ;-)

Regards,
CVH

513TranslationBug ReportLowTranslation errorsAssigned
0%
Task Description

If you spot an error in the translated user interface of QCAD, please add a comment to this task or submit your translation at http://translate.qcad.org.
Thank you for your help!

Wenn Sie einen Fehler in der übersetzten Benutzeroberfläche von QCAD erkennen, fügen Sie bitte einen Kommentar zu diesem Report hinzu oder geben Sie Ihre Übersetzung ein unter http://translate.qcad.org.
Vielen Dank für Ihre Hilfe!

Si vous remarquez une erreur dans l’interface utilisateur traduite de QCAD, veuillez ajouter un commentaire à cette tâche ou soumettre votre traduction à http://translate.qcad.org.
Merci pour votre aide!

Si detecta un error en la interfaz de usuario traducida de QCAD, añada un comentario a esta tarea o envíe su traducción a http://translate.qcad.org.
Gracias por tu ayuda!

Se si rileva un errore nell’interfaccia utente tradotta di QCAD, si prega di aggiungere un commento a questo compito o di inviare la traduzione a http://translate.qcad.org.
Obrigado por sua ajuda!

Se você detectar um erro na interface de usuário traduzida do QCAD, adicione um comentário a esta tarefa ou envie sua tradução para http://translate.qcad.org.
Obrigado pela sua ajuda!

Als u een fout ziet in de vertaalde gebruikersinterface van QCAD, voeg dan een opmerking toe aan deze taak of stuur uw vertaling naar http://translate.qcad.org.
Bedankt voor uw hulp!

Showing tasks 401 - 422 of 422 Page 9 of 9<<First - 5 - 6 - 7 - 8 - 9

Available keyboard shortcuts

Tasklist

Task Details

Task Editing