QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategory  descTask TypeSeveritySummaryStatusProgress
1977QCAD (main)Feature RequestLowCorresponding coordinate format Assigned
0%
Task Description

Hi,

It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.

This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.

Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).

1982QCAD (main)Feature RequestLowmeasure DIN 1356Assigned
0%
Task Description

To measure in the format DIN 1356 , Architect
It is hard work to do this manual input with meta characters.

1983QCAD (main)Feature RequestLowTrim All or Bulk Break outAssigned
0%
1 Task Description

This is a trim method I am missing in Qcad.

20 years ago it existed in CadKey.
You had a bunch of lines or segments.
You defined a (new) line or segment as cutter.
‘Trim All’.
You pointed at the side of the cutter entity to trim all intersecting at that side.

Pritty the same as in this topic:
https://qcad.org/rsforum/viewtopic.php?t=5221

Only in rare cases I can use Husky’s workaround as pro.
It all depends on what else is in the clipping rectangle that is needed to trim all intended.
If of no use all single crossing entities have to be chosen one by one.

Regards,
CVH

1999QCAD (main)Feature RequestLowViewport: Add additional properties for controlling dim...Assigned
0%
1 Task Description

When working with multiple Viewports with different scale it could be very useful to have extra properties controlling how dimensions are rendered in the viewport:

1)
E.g an extra “Dimension Scale” under “Scale” in the Viewport selection’s ‘Specific Properties’ section, could allow having the same size when printed.
This Dimension Scale would be multiplied on top of the Scale value, but only for Dimensions rendering.

2)
Toggle button for hiding any dimensions in the Viewport. Maybe this should be controlled by being able to specify a Layer that should be hidden in this Viewport only, then I could select my Dimensions layer here.

The Viewport properties:
https://i.imgur.com/s07JtaB.png

2018QCAD (main)Feature RequestLowLayer visibility setting per view/view-portAssigned
0%
2 Task Description

In a medium complex drawing it’s often too much details to have all layers in a drawing visible at once. Also, it is of great importance to be able to have a single model to avoid duplication of work and risk inconsistency.

So i would like to create a number of views where each view has selected layers visible (that makes sense for the purpose of the view) and then assign the views to different layout blocks (using view-ports) in paper-space to be able to setup printing of several views on the same page/PDF

This also means that view-ports would have to be aware of what view they are displaying (if any besides the standard-view).
This will then make it possible for printouts of different views with selected layers visible (different for each view and view-port) and still have only one model. Today this is not possible.

As it is today the only limited workaround is to set the layers you want to display, print/PDF of that viewport on separate page, and then change it for the next page, and so on. The big drawback is that you cannot have two different views/view-ports on the same page with different layers visible. Also, for large drawing it is painful to have to do a lot of manual setup for each rendering of the complete drawing.

2034QCAD (main)Feature RequestLowPaint Properties to include modifying linetype scales w...Assigned
0%
Task Description

Previous Feature Request #1285, dated 2015, incorporated in QCADPro 3.24. I regularly adjust linetype scales on hidden, centreline and phantom lines to achieve the best appearance on the drawing when printed. I note the Paint Properties feature copies all the attributes of the chosen line but does not copy the scale. I have to change the scale of each line, even after ‘painting’. This copying all Properties is something AutoCAD does. I know I could change the line to Hidden2 etc. and tick the ‘scale lines’ box in Drawing Properties but that is not always successful- copying properties is a quick and useful way of achieving the required result.
QCAD Pro 3.24 Windows10.

2037QCAD (main)Feature RequestLowSupport alternative angle referenceAssigned
0%
Task Description

E.g. 0 degrees at the top, clock-wise for positive direction, alternative angle units.

2056QCAD (main)Feature RequestLowOption Duplicate layer (yy) inclusive all sub-layers.Assigned
0%
Task Description

If I’ve to duplicate a layer with a bunch of sub-layer it’s a kind of a Sisyphus task to get it done.
Currently I have to duplicate each single layer. Then in an additional step I’ve to address each child layer to the proper parent layer.

Current lack:
Marked parent layer with all sub-layer / Duplicate Layer / only ONE layer will be duplicated.

With other words: If I have to duplicate a layer with 5 sub-layer it requires 11 steps to get a copy of that tree ... :-(

2057QCAD (main)Feature RequestLowMultiline toolAssigned
0%
Task Description

Implement a multiline tool.

2060QCAD (main)Feature RequestLowDialog box for Layer StatusAssigned
0%
Task Description

So far, layer status has only been implemented very rudimentarily.
I wish something like a dialog box in which you can choose for each layer status, which layers belong to it and which not.

2070QCAD (main)Feature RequestLowcropping imageAssigned
0%
Task Description

It may be useful to insert the “image cropping” function both in top / bottom - right / left mode, and with polyline

728QCAD (main)Performance IssueLowSlow loading of drawing with many block insertsAssigned
0%
1 Task Description

Slow loading of drawing with huge number of block inserts (more than 10000).

1801QCAD (main)Performance IssueLowlow perfomance in paper space and viewportsAssigned
0%
Task Description

Improving the performance of the exceptional use of the processors when switching from the model to the paper space (testing with the attached file) the functionalities of the commands for the viewports are too low in the paper space.

2021QCAD (main)Performance IssueVery LowCannot work with big dwg filesAssigned
0%
Task Description

Openning a big file or doing any action in it, takes minutes to load.
Even dragging the scrollbar slightly left or right, takes mintues to redraw the canvas again, which makes QCAD un-usable for professional use.
Is there a way to make QCAD usable, after loading completed:
- Like suppressing edit until user says so,
- or taking snapshots of rendered canvases to another file and use it, as windows uses thumb.db ( for negative latency :P )

PS: I wish I could help a bit, but my hand are tied. I am just a java freak, I am opt to any idea of porting it to java, if she is still alive.

Tuğalsan Karabacak
EEE, MSc Mobile Comp & App, IWE

2063QCAD (main)Performance IssueLowBad performance while zooming inside layout block with ...Assigned
0%
Task Description

Zooming in and out is lagging to the point of unusable. This is happening in a layout block with the cursor pointing inside geometry with hatches. When the cursor is pointing outside the geometry zooming works as expected.
The attached file has a very simplified testcase that shows this problem almost in the same way as a more complex drawing with multiple layers and hatches.

edit: I also attached the more complex drawing because it is a bit unclear to me where the lagging stops. Outside the viewport or outside the paper.

I just noticed the selection box has the same problem!

1323QCAD (main)SuggestionLowImprove command line support in QCADAssigned
0%
Task Description

Hi,

As a typical command line draftsman (still using acad10 for dos, since microsoft doesn’t supoort Win NT anymore),
I noticed a severe lack on command line acces in QCAD.

For example I find the icon and pixel selecting methods within qcad very confusing and rude.

With the normal cad Select command I can select exactly what en how I want it.

I intend not to be rude, but I find my drawing screen littered all over with all kind of very specialist menu’s,
tools and options. Sorry, I just want to make a drawing at the natural intuitive way, as with a pencil.
So I use command line Commands, such as Move, Copy, Change, Select, a.s.o.
For a ‘Command scripting’ user (-batching is a different tool!-),
it seems to me logical these basic commands should be accessable.

1368QCAD (main)SuggestionLowContext Menu - suggestionsAssigned
0%
1 Task Description

I love using the context menu, speeding up my workflow indeed.

I would like to suggest that we have the added option to show only icons if desired and also that maybe an option to save and show commonly used tools!

Maybe the context menu could be configurable to show two columns, one for the normal last used tools and the othjer one for the user saved tools?

What do you think?

1469QCAD (main)SuggestionLowCartouche automatiqueAssigned
0%
1 Task Description

Would not it be possible to create a kind of template for printing?
We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).

Original suggestion:

Bonjour,

Ne serait il pas possible de créer une sorte de template lors de l’impression ?
On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).

1526QCAD (main)SuggestionLowExporting block attributes to CSVAssigned
0%
1 Task Description

Two useful commands make it necessary to

1-”delete all the history of the command lines without terminating QCad” ; and

2-”export attributes to the CSV file as exported to the Blocks List”

1678QCAD (main)SuggestionLowProperty Editor dialogAssigned
0%
Task Description

The line for “General properties”, “Layer” the line is too narrow,
so you do not see the layer name when the Property Editor is pinned to the side.
(see Forum - Suggestions and Feedback):
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5239

1740QCAD (main)SuggestionLowMake unprintable layers also hidden in print previewAssigned
0%
Task Description

Make unprintable layers also hidden in print preview

1754QCAD (main)SuggestionLowWhen Selecting multiple blocks that contain the same at...Assigned
0%
Task Description

When selecting multiple blocks that contain the same attribute names, attribute properties appear with the values of the last selected block instead of “various”. I do not know if this is a “bug” or developer option, but “various” would be better in my opinion.

1789QCAD (main)SuggestionLowApplication Preferences / General / Performance :0Assigned
0%
1 Task Description

Hi Andrew,

we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.

I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.

Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.

Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.

Just my two cents. ;)

1851QCAD (main)SuggestionLowLateral surface of a coneAssigned
0%
Task Description

Module mise à plat d’un cone

Bonjour,

Serait il possible dans un futur d’ajouter un module de mise en plan de cone.

Une petite fenêtre sur lequel on donne par exemple :
1- Ø haut
2- angle de coupe du haut
3- hauteur du cône
4- Ø bas
5- angle du bas
6- épaisseur matière

Ce qui permettrai de sortir une mise en plan a plat de la forme

1915QCAD (main)SuggestionLowViewport does not rotate view-port when changed in pape...Assigned
0%
Task Description

To reproduce

1. Select a new view-port in model-space
2. Select the appropriate paper-space
3. When the paper space opens change the angle of the viewport.

Actual

The object in the viewport changes but the viewport itself remains unchanged

Expected

That both the view-port and the object changes angle as the angle is updated

Motivation

If you abort the placement (but keep the angle) and go back to model-space and then redo the operation the view-port is rotated along the angle. It seems that the viewport only picks up the initial angle once the paper-space is open and ignores any changes thereafter

Workaround

1. Select the view-port per normal in model-space
2. Open the paper-space and set the wanted angle but do not place the view-port in paper space
3. Abort the placement on paper-space and redo the whole operation

Once the paper space is opened again the view-port will have the chosen angle

2072QCAD (main)SuggestionLowInserted and flipped block mirrors text and dimAssigned
0%
Task Description

Text and/or DIM used in blocks will be mirrored if inserted with a vertical/horizontal flip option.

Text/DIM which was successfully used in previos QCAD versions are now mirrored if they are loaded in the current version.

Version 3.23.0 doesn’t shows this behavior.

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7206

1863ECMAScriptFeature RequestLowWidgetFactory.saveState: save state of checkable QGroup...Assigned
0%
Task Description

QGroupBox widgets with <property name=”checkable”> are not saved in Qcad3.conf

976dxflibBug ReportLowDXF import errors related to hatches, textsAssigned
0%
Task Description

See:
http://www.qcad.org/rsforum/posting.php?mode=reply&f=30&t=2677

1203dxflibBug ReportLowImages not saved (dxflib)Assigned
0%
Task Description

I am doing a bit of landscaping and using a (big) ortophoto as one of my layers in order to sanity-check on the ground measurements.

The layer contains a point and the image and nothing else.

The image is a 8MB file: “PNG image data, 4200 x 2980, 8-bit/color RGB, non-interlaced” and it is scaled to 210 coordinate units (meter) horizontally in the drawing.

With approx 50% probability the image disappears during Save, as see for instance in this diff of the DXF file:

      @@ -158699,28 +153057,6 @@ AcDbXrecord
        90
       6
         0
      -IMAGEDEF
      -  5
      -A1
      -100
      -AcDbRasterImageDef
      - 90
      -0
      -  1
      -/critter/HTV10/Ortofoto/ortofoto201502f.png
      - 10
      -210.0
      - 20
      -149.0
      - 11
      -1.0
      - 21
      -1.0
      -280
      -1
      -281
      -0
      -  0
       ENDSEC
         0
       EOF

The point in the same layer does not similarly disappear, the bug only seems to affect images.

I have seen this bug from version 3.7.5.0 to git as of yesterday (63e06c778926a803bdfbffdf27b8c24d41511072).

I have not been able to correlate the bug with anything.

Looking closer at the DXF file (attached), there seems to be some residuce of attempts to insert images in protected/invisible layers, so this may be some kind of refcounting issue.

(Any chance of getting FreeBSD into the “Operating System” field ?)

1506dxflibFeature RequestLowwriteVPort parametersAssigned
0%
Task Description

Add parameters to the function DL_Dxf::writeVPort.
This way users will be able to specify the desired viewport.

Is the github the official repository? Are pull requests sent there accepted?

1542dwg2svgFeature RequestLowdwg2svg: add switch to show only given layer(s)Assigned
0%
Task Description

Implement a command line switch to only show a list of given layers for dwg2* command line tools.

1021dwg2pdfFeature RequestLowdwg2pdf: switch to set block to exportAssigned
0%
1 Task Description

Add a command line switch to dwg2pdf to export a given block instead of “*Model_Space”.

1700dwg2pdfFeature RequestLowdwg2pdf: output multiple layoutsAssigned
0%
Task Description

Add support to specify multiple blocks (layouts) to output (one per page).

1823dwg2pdfFeature RequestLowplotting error to pdf a Dwg where the view port is not ...Assigned
0%
Task Description

When trying to plot a dwg or a dxf to pdf where the viewport is orientated to a different angle than north up
the data in the view port is plotted north up.
see attached DWG and pdf for clarification.

1824dwg2pdfFeature RequestLowdwg2pdf does not obey frozen layers in paper-space view...Assigned
0%
Task Description

We currently have a paper-space using two viewports with different layers from the model-space frozen. Unfortunately in the pdf output the layers which are frozen show up.
dwg2pdf should obey the specific frozen layer for each viewport

1887dwg2bmpFeature RequestLowAdd "-max-lineweight" option for dwg2bmpAssigned
0%
2 Task Description

Hi there,

A friendly request to add the option to set a maximum lineweight for raster conversions via dwg2bmp.

Depending on the LW configuration of the CAD file, rasterization operations sometimes yield terrible results (see attachment). This would also mirror the similar “-min-lineweight” options available on “dwg2svg” and “dwg2pdf” (although not on “dwg2bmp”).

See also: https://qcad.org/rsforum/viewtopic.php?f=32&t=6298

Thanks!

1888dwg2bmpFeature RequestLowAdd support to disable hatch rendering on "dwg2bmp"Assigned
0%
1 Task Description

Hi!

A friendly request to add an option to disable hatch rendering on “dwg2bmp” conversions.

Depending on the nature of the conversion and the density of the hatch, this may render unintelligible images (see attachments). The option could look like “-t, -nohatch” to indicate hatches should be hidden before rendering. This could potentially become an option too for “dwg2svg” or “dwg2pdf.”

Amazing product, thank you so much!

1922dwg2bmpFeature RequestVery LowAdd error message when requesting raster for a non-exis...Assigned
0%
Task Description

It would be nice if QCAD spit some kind of warning message when trying to render a layer with a name that doesn’t exist (and perhaps render nothing), rather than silently rendering an empty image. :D

See https://qcad.org/rsforum/viewtopic.php?f=33&t=6453

Showing tasks 351 - 388 of 388 Page 8 of 8<<First - 4 - 5 - 6 - 7 - 8

Available keyboard shortcuts

Tasklist

Task Details

Task Editing