|
1254 | QCAD (main) | Feature Request | Low | Add drop object along a path with automatic trim | Assigned | |
|
Task Description
Add drop object along a path with automatic trim.
The object can be a selection before or after selecting the tool, an entity or a block.
The path can be another entity from a start point to an end point.
Dropping can be made on one side or the other (like in other tools depending on the side of the cursor), with a choice of miroring the object or not.
The number of drops or the distance between can be selected.
The distance can be between a control point of the object or its sysmetry axis or border.
The dropping direction can be selected too.
The droping depth can be constrained : all control points have passed the path, or one of them. Alternatively, replace control points by an entity belonging to the object.
Exemple of use case : equidistant drills in a curved rail. The dropping depth constraint enables for example to ensure a drill has a minimal depth when not orthogonal to a plan.
|
|
1100 | QCAD (main) | Feature Request | Low | Add drag dimension (snap) along dimension line | Assigned | |
1 |
Task Description
In Autocad when making a dimension when left clicking to place the dimension there is the possibility to drag the dimension to either side of the dimension. This is also possible with Qcad dimension, but it losses the snapping and does not extend the dimension line out to the dimension text.
This is very useful when the two lines the needs a dimension are close together, or overlapping with another.
Attached is two images one for autocad and one for Qcad
|
|
1713 | QCAD (main) | Feature Request | Low | Add attribute value "By Parent" for child layers | Assigned | |
|
Task Description
Add attribute value “By Parent” for color, line weight, line style for child layers.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5407
|
|
1629 | QCAD (main) | Feature Request | Low | Add additional Option to Angelur DIM Tool | Assigned | |
|
Task Description
Please see:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956
|
|
1887 | dwg2bmp | Feature Request | Low | Add "-max-lineweight" option for dwg2bmp | Assigned | |
2 |
Task Description
Hi there,
A friendly request to add the option to set a maximum lineweight for raster conversions via dwg2bmp.
Depending on the LW configuration of the CAD file, rasterization operations sometimes yield terrible results (see attachment). This would also mirror the similar “-min-lineweight” options available on “dwg2svg” and “dwg2pdf” (although not on “dwg2bmp”).
See also: https://qcad.org/rsforum/viewtopic.php?f=32&t=6298
Thanks!
|
|
639 | QCAD (main) | Feature Request | Low | Ability to load a file of keyboard shortcuts | Assigned | |
|
Task Description
It would be useful if a file of keyboard shortcuts to commands could be loaded.
Then a set of shortcuts identical/based on the Autocad keyboard shortcuts can be loaded, making it much easier for Autocad users to migrate to your product.
There does seem to be some future functionality planned here, with the shortcut ‘scheme’ selector in Program Preferences, but for the moment ‘Qcad’ is the only option available.
This strategy is used to great effect by Draftsight (but who trusts a big company like Dassault/Solidworks...)
|
|
1913 | QCAD/CAM | Bug Report | Low | 3D Simulation Behaves odd | Assigned | |
|
Task Description
Hallo Andrew,
testing the drill toolpath I used single point markers.
In 3D simulation the tool drills the toolpath AND uses the drill as a mill.
Cam Export and generated G-code is not effected.
|
|
1473 | QCAD (main) | Feature Request | Low | "Partial" circular/radial dimensions | Assigned | |
|
Task Description
This is kind of related to FS#952, or rather a superset of it.
Consider the situation in the attached image. There is a perfectly good, albeit really shallow arc, making the radius somewhere in the vicinity of 600 millimeters, and the radial dimension being drawn accordingly.
Considering the other dimensions of the part, this is completely unusable, even to work with, really, but definitely so when it needs to be put on paper.
It would be nice to have some sort of “partial” (for my lack of a better word) radial/diametric dimensions where the dimension length can be adjusted.
Considering that this can be done with Leader, maybe a better (more generic) solution would be for Leader type dimensions to have options so they could automatically generate labels for various dimensions of a selected entity – sort of like having the Prefix/Tolerance/Scale options the other dimensions have, and have some additional fields there for selected entity and maybe dimension type (for example, radial or diametric for an arc-type entity).
|
|
860 | QCAD (main) | Feature Request | Low | "Create Library item from selection" default Path ... | Assigned | |
1 |
Task Description
Default Path for “Create Library item from selection” / “Save us” is C:\Programme\QCAD pro 3.1.6 ... ... regardless of the settings in the “Application Preferences / Library Browser / for Library Sources. And QCAD doesn’t remember the last path choice ....
If I have to save 50 Library Items I have to navigate 50 times thru my system to find - the same place.
It would be nice if QCAD would point in first place to the Library Source or, at least, remember the last used path ...
|
|
681 | QCAD (main) | Feature Request | Low | 'Plug-in' for Gear generator | Assigned | |
1 |
Task Description
Feature request for a ‘plug-in’ for generating different types of gears, like - Ring, Spur, Sprocket, Rack, etc... etc... To produce 2D templates for all sorts of projects.
|
|
1870 | QCAD (main) | Feature Request | Low | Stretch tool / option to turn selection restriction on... | Assigned | |
|
Task Description
Hi,
since 3.19.2 the Stretch tool looks for any selection and follows the specification “Only stretch selected entities if there is a selection”.
That is a nice feature but it leads many times to confusing because I have to deselect a selection just because I need to use the stretch tool on something else on the fly. The same if I “forgot” a selection outside of my zoom which is still important for me. The stretch tool just won’t work without any message why not. My routine now is that I terminate every selection just before I use the stretch tool just not to be surprised by “why isn’t it working”?
It would be nice to have in the Stretch option bar a checkbox to turn the “only selection feature” on or off. QCAD should remember that setting.
|
|
1919 | QCAD (main) | Bug Report | Very Low | Wrong order XY(Z) for Ordinate Dimension in property ed... | Assigned | |
|
Task Description
Win7pro Qcad Pro 3.22.1.2
In property editor properties of an Ordinate Dimension
Without Show Z DefPoint is displayed in order YX?
With Show Z Origin is displayed in order XZY? DefPoint is displayed in order YZX? LeaderEndPoint is displayed in order ZXY?
Regards
|
|
1443 | QCAD (main) | Bug Report | Very Low | View > Status Bar remains unchecked | Assigned | |
|
Task Description
Status Bar menu remains unchecked even it is toggled on or off
|
|
1905 | QCAD (main) | Bug Report | Very Low | View > Property Editor: Changing attribute of block cha... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6367#p23947
|
|
1719 | QCAD (main) | Bug Report | Very Low | Undo on converted drawing leads to wrong label position... | Assigned | |
|
Task Description
Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.
|
|
1760 | QCAD (main) | Bug Report | Very Low | Self-crossing polylines can't be cut twice at segment c... | Assigned | |
|
Task Description
Re-entering dividing problem from FS#1757
Divide the poly selecting near segment 1 at the segment crossing. > A new node is inserted on the crossing and made start and end node. Divide the poly again selecting near segment 2 at the segment crossing. > no division appears to be done.
One can’t divide the second segment at the crossing
Presumed intended behaviour like FS#1750
Regards
|
|
1900 | QCAD (main) | Bug Report | Very Low | Remote shares initially not accessible. | Assigned | |
|
Task Description
My data files are stored on network shares (synology) with a GB link. QCAD Pro is run in Admin mode.
While in my Windows browser all remote shares are accessible (Green), in the QCAD file open menu they are initially shown as not accessible (Red). By accessing a specific drawing file in a remote share, the share will open and turn green.
Same behavior using ‘Open recent’. Always the message is given that the requested file does not exist, and the file is wiped from the ‘Recent Open’ list. Only if the share is first accessed through ‘Open’ with a random file, it will turn and a ‘recent open’ file for that share will open.
Drag and Drop from a remote share will never work.
|
|
1788 | QCAD (main) | Feature Request | Very Low | New snap: reference points of a block references | Assigned | |
|
Task Description
I know this was reported and fixed before ...
https://www.qcad.org/bugtracker/index.php?do=details&task_id=843
... but it looks like we have the issue now back with some kind of variation.
If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.
If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.
Edit: New Test drawing:
|
|
1426 | QCAD (main) | Feature Request | Very Low | Load drawings that were open when closing QCAD on start... | Assigned | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4249
|
|
1691 | QCAD (main) | Bug Report | Very Low | Issue with Layouts after "File-Revert" | Assigned | |
|
Task Description
QCad 3.19.2 Professional, 64bit, Liux Mint
Case: 1. Open some saved drawing with viewport entities on layout block (paper space). Print Preview mode is “On” automatically. 2. After “File-Revert” drawing is reopened on layout block (paper space), but now Print Previw mode is “Off” .
For example can try on “flange.dxf”
|
|
1974 | QCAD (main) | Bug Report | Very Low | File > Print Preview: Cannot move paper in new drawing | Unconfirmed | |
|
Task Description
Yesterday I set up a Windows 64 bit install of QCAD Pro which shows the same bug I have been seeing for a while in the Community linux git repo.
Create a new drawing and then go to “Print preview”. Enable “Move paper postion”, the cursor changes to the hand icon, but the paper position is unable to be moved. Only by saving the drawing, exiting the program, restarting and reopening the drawing, will the “Move paper postion” function correctly.
Affected versions tested:
Windows 64bit installer download, as of yesterday. Linux 64bit build from git, about 20minutes ago.
For what it’s worth, this bug is not present in this previous git checkout:
Version: 3.21.1.0 (3.21.1) Internet: QCAD.org Build Date: Jul 2 2018 Revision:
Qt Version: 5.7.0 Architecture: x86_64 Compiler: gcc 6.3.1
Thanks for a great product.
|
|
1923 | QCAD (main) | Bug Report | Very Low | Faulty rendering Polylines with Global/Local Widths and... | Assigned | |
|
Task Description
Win7pro 32bit Qcad 3.23.0
Andrew, The Arc segments of Polylines with Global or any Local Width render faulty where Global Z or any of the arc’s local Z is not zero.
In the attached drawing setting the Global Z of the inner poly to 5,10,...
The setting of Z to not zero affects the radius of the projected arc and not the bulging of the poly. It also affects the projected widths of the line inversely, but not by changing the widths properties.
Pritty rare combination! True. Qcad is 2D native! True.
Flatten will resolve this.
It is not a purely visual rendering fault, the poly will explode as such.
Maybe similar flaw as with uneven scaling blocks with arcs. https://qcad.org/rsforum/viewtopic.php?f=8&t=5566#p20703
Regards
|
|
1765 | QCAD (main) | Bug Report | Very Low | Errors with polyline offset | Assigned | |
1 |
Task Description
Win 7 32 bit QCAD 3.20.1
Ofsset of a base-line with arcs results in massive ammount of errors. Most of them occur as a cluster of very tiny segments and are part of the offset. (zoom far in at the red circles) Mostly they occur where the offsetted arcs should merely be trimmend pairwise. Some occur as detached entities or as detached strings of entities very near the offset (strings not documented). Spooks occur at opposite site when base-line is not closed. 360° curls can occur with R = Offset. Null-entities may occur (not documented, hard to find and not able to copy).
The base-line is checked and sound and has mixed tangentially or not tangentially connected arcs. Offsetting the mother base-line of the base in the file has similar effect but not all and/or different ones. Also encountered with offseting polys from fonts. Used to define pocket paths for CNC. Detected because the CNC driver will not accept Self-crossers, Null-entities or open ends depending on the settings.
Work arround is to explode and select small entities but this does not solves the issues. 1) Choosing the tolerance large enough will detect small segments that should stay. 2) Recombining will generate new ones at the place where the main segments remain crossed. Cleaning up the paths is a daunting process with some thousand segments for several offsets.
I assume this has an infuence on the CAM part of QCAD too unless the offset method is different.
|
|
1920 | QCAD (main) | Feature Request | Very Low | Edit > Application Preferences: Add preference to disab... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447
|
|
991 | QCAD (main) | Feature Request | Very Low | Add warning when overwriting custom property | Assigned | |
|
Task Description
Property Editor - Geometry - Custom - Add Custom Property
If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.
|
|
752 | QCAD (main) | Feature Request | Very Low | Add support for the 3dConnexion Space Navigator (Pan an... | Assigned | |
3 |
Task Description
The 3dConnexion Space Navigator would be wonderful as a pan and zoom control. I find it extremely useful in SketchUp and when I switch from that to QCAD am always disappointed to find it doesn’t work.
3dconnexion DOT com/buy/shop.html?3dxcp=GA_GA_search_google_US_Brand
While full support for the buttons and such would be nice, just the ability to map the axis to pan and zoom would be wonderful.
|
|
1922 | dwg2bmp | Feature Request | Very Low | Add error message when requesting raster for a non-exis... | Assigned | |
|
Task Description
It would be nice if QCAD spit some kind of warning message when trying to render a layer with a name that doesn’t exist (and perhaps render nothing), rather than silently rendering an empty image. :D
See https://qcad.org/rsforum/viewtopic.php?f=33&t=6453
|
|
1649 | QCAD (main) | Feature Request | Very Low | Add configuarable format options for saving blocks to l... | Assigned | |
|
Task Description
Add configuarable format options in application preferences for saving blocks to library to either dxf or dwg.
|
|
1626 | QCAD (main) | Feature Request | Very Low | 'Clip to Circle' tool | Assigned | |
1 |
Task Description
Hi Andrew,
Would it be possible to have a clip to circle tool also please?
Regards
Clive
|