|
2495 | ECMAScript | Bug Report | Very Low | RLine.isParallel(RLine) may return true for certain non... | Assigned | |
1 |
Task Description
Andrew,
It took me a while to find the source of a certain freak bug I encountered. I used the RLine.isParallel(RLine) as a test for knowing if line segments were parallel or not.
Included below is script code that mimics the functionally of isParallel().
As far as I know isParallel() is nowhere used in the QCAD open source. Textual only found in RLine.cpp & .h or under: opennurbs, ecmaapi\generated and ecmagenerator\src.
// Example:
// RShape1: RLine(RShape(address: "0xcd70e28"), startPoint: "RVector(969.219858, -171.914894, 0.000000, 1)", endPoint: "RVector(1010.000000, -140.000000, 0.000000, 1)")
// RShape2: RLine(RShape(address: "0x7659770"), startPoint: "RVector(969.219858, -171.914894, 0.000000, 1)", endPoint: "RVector(930.000000, -340.000000, 0.000000, 1)")
----
var aShape1Angle = shape1.getAngle(); // =0.6640461628266838 rad
var aShape2Angle = shape2.getAngle(); // =4.483157047107694 rad
----
// RLine::isParallel(RLine) -> aTest1 || aTest2
var aTest1 = RMath.isSameDirection(aShape1Angle, aShape2Angle); // =false
var aTest2 = RMath.isSameDirection(aShape1Angle, aShape2Angle + Math.PI); // =true
var aTestOr = aTest1 || aTest2; // =>TRUE !?
----
// # BUG # RShape1 is considered as parallel with RShape2
----
// RMath::isSameDirection(dir1, dir2, tol) ... tol = RS.AngleTolerance = 1e-9
// for aTest1 -> ax1Test1 || ax1Test2
var ax1Dif = Math.abs(aShape1Angle - aShape2Angle); // =3.8191108842810104 rad
var ax1Test1 = ax1Dif < 1e-9; // =false
var ax1Test2 = ax1Dif > 2*Math.PI - 1e-9; // =false
var ax1TestOr = ax1Test1 || ax1Test2; // =>FALSE
----
// for aTest2 -> ax2Test1 || ax2Test2
var ax2Dif = Math.abs(aShape1Angle - (aShape2Angle + Math.PI)); // =6.9607035378708035 rad
var ax2Test1 = ax2Dif < 1e-9; // =false
var ax2Test2 = ax2Dif > 2*Math.PI - 1e-9; // =true
var ax1TestOr = ax1Test1 || ax1Test2; // =>TRUE
----
// # BUG # The second test of the second isSameDirection() test returns true because ax2Dif is over 2pi
Regards, CVH
|
|
2497 | QCAD (main) | Bug Report | Very Low | Draw > Circle > 3 Tangents (CT3) fails in some cases wi... | Assigned | |
1 |
Task Description
Andrew,
See attachment with example:
Solution included on layer ‘Solution’.
Regards, CVH
|
|
2533 | QCAD (main) | Bug Report | Low | Surveyor's units never seem to display when selected as... | Assigned | |
|
Task Description
I've tried several times to try to see what the "surveyor's units" option of the Angular Dimensions format in the UI preferences will display as, but all it ever seems to do is cause the angle measurement to become blank. No angles are displayed whenever this mode is selected.
Indeed, I cannot figure out what the setting actually does besides causing angles to never be displayed.
Is there a way to make this setting do something meaningful or is it just broken?
I found an old forum thread from 2016 about this same issue and it sounds like the same things is still happening since then.
I'm not a surveyor so I have no actual practical use for these units that I can yet see, but I just figured I'd add an report to the bug tracker here in case any developers aren't aware that the bug still seems to exist.
Does the setting do anything besides changing the displayed units in the status bar?
|
|
2538 | QCAD (main) | Bug Report | Very Low | Weight 2.11 French translation typo | Assigned | |
1 |
Task Description
Andrew,
When switched to French I detected a typo in the drop down box for Lineweight.
Weight 2.11mm is listed as 1.58mm {2.11m?} https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts#L1228-L1229 Also see attached image file.
May I ask why only ISO types have a comma instead of a point in French. The use of a comma is uncommon in the Property Editor even when that is the native decimal separator. I also detect an extra space between the value and ‘mm’ and that only for the ISO types.
This only occurs in: https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pl.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pt.ts
Probably not OS or QCAD version related.
Regards, CVH
|
|
2539 | QCAD (main) | Bug Report | Very Low | (Relative) Polar feet + surveyor notation fails. | Assigned | |
1 |
Task Description
Andrew,
A user essentially pointed out to an ACAD textbook example. https://qcad.org/bugtracker/index.php?do=details&task_id=2533 Step 3 of: https://autodesk.blogs.com/between_the_lines/2012/07/drawing-with-surveyors-units-in-autocad.html
Please refer to this topic: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10652
Regards, CVH
|
|
2543 | QCAD (main) | Bug Report | Low | Polygonal Area Tool (IR) creates shapes persistently, c... | Unconfirmed | |
1 |
Task Description
Upon activating the Polygonal Area Tool either by clicking on the toolbar or by the IR keyboard shortcut the tool will persistently draw a polygon without clicking anything. This happens with the mouse and the trackpad on the MacBook Pro. This was happening in 3.29.3, and then after I upgraded to 3.29.4. The MacOS version is 14.1 Sonoma.
|
|
2547 | QCAD (main) | Bug Report | Very Low | Block > Purge Unused Blocks > Removes _DatumFilled bloc... | Assigned | |
1 |
Task Description
Andrew,
The _DatumFilled Block used by Datum entities (DT) is considered as not used and is purged by Purge Unused Blocks (BP). There is no block association for these special types of arrowheads in QCAD.
After purging the Datums are not immediately updated but the special arrowheads will eventually disappear. Adding new Datums will not fix that.
Not problematic because the _DatumFilled Block is re-created on save/reload when Datum entities exists. Datums are updated.
Probably not OS or version related. Related forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=10694
Best solution would be to support different types of arrowheads and all related: https://qcad.org/bugtracker/index.php?do=details&task_id=695 https://qcad.org/bugtracker/index.php?do=details&task_id=757 https://qcad.org/bugtracker/index.php?do=details&task_id=1157
Regards, CVH
|
|
2556 | QCAD (main) | Bug Report | Low | Win11 Printing Orientation Issue: Landscape >>Portrait | Assigned | |
|
Task Description
Andrew,
Related topic: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10649
Already two different users report that Landscape is printed cropped in portrait format, both Win11. The behavior change occurred recently. Although the second user (rdtsc) reports the same behavior for latest Mabox Linux (Manjaro, Arch.)
Can not replicate that on Win7 32 bit nor on Win10 64 bit, both are no longer or not updated OS. For one, I have no orientation setting displayed in my printer dialog.
It seems not to be related to the QCAD version: Reported for: - Win11 QCAD Pro 3.29 - Win11 QCAD-CAM 3.27.8.0
Regards, CVH
|
|
2558 | QCAD/CAM | Bug Report | Low | Offset trajectory path issue with circular Lead In/Out | Waiting on User | |
|
Task Description
Andrew,
Please refer to related forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=10724#p44206
An eighth circle with radius 8 Lead In/Out relates to nothing in the actual exported cutter trajectory. Nor does it with the edge being cut.
Proper examples and a comparison with ‘Extension’ type Lead In/Out included. Conclusion: IMHO connecting the cutter trajectory and edge being cut is wrong.
It looks a lot like turning on Cutter Compensation (G41/42) while the motion is circular. But that is uncommon because most controllers can not cope with this motion. One can increase the offset gradually along a straight pre-entry segment for turning on G41/42 but not along a circular path. Also see snippet: - Pre-entry C→B turning on G41 - Circular Lead In B→A
Regards, CVH
|
|
2564 | ECMAScript | Bug Report | Low | REllipse::getVectorTo(p) returns a vector to a major po... | Assigned | |
|
Task Description
Andrew,
If a given point p is on the major axis then REllipse::getVectorTo(p) returns one of the major points. In the code this is handled as a special case when the point is in-line (collinear) with the major axis. This is only correct for points p outside the ellipse. Or better: For points p outside the area between the focal points.
The correct solutions are: - if p equals the center ⇒ two vectors to the two minor points. - if p equals one of the major points ⇒ the major point itself. - if p is in between the focal points ⇒ two vectors mirrored over the major axis. - if p is on the unlimited axis but outside the focal points ⇒ the nearest major point.
The problem is now what to return on a duality with full ellipses. Or for an ellipse arc where two results are valid.
For example: RCircle::getVectorTo(p) returns an invalid vector when the point is near the center. Then there are an unlimited number of solutions.
Further discovered that the point related to the returned vector may fail x²/a²+y²/b²=1 Although almost on the ellipse within 2.299e-10 ... f(x,y) may return 9.5310 This example would fail REllipse::contains while the border is considered as inside.
Meanwhile implemented a ‘simple method’ to find the nearest point(s) on an ellipse. Fast converging in 3 steps, no trigs and very accurate, about 24 lines of code. f(x,y) returns mostly 1.000 with so far: - a minimum of 0.9999999999999997 - a maximum of 1.0000000000000007. In other words, it is only off for the last meaningful decimal digit.
With this all methods that are based on REllipse::getVectorTo(p) can be implemented very reliable with tolerance, border flag, ... and so on. By default the normal for a point is given with high accuracy and a tangent is that rotated. ... .. .
Regards, CVH
|
|
2565 | QCAD (main) | Bug Report | Very Low | NaN length for arbitrary ellipse arc | Assigned | |
|
Task Description
Andrew,
Probably not OS or QCAD version related.
The ellipse arc in the example file is drawn CCW and then the start parameter was set to 180. (All part of a test of newer code for the nearest point on an ellipse) Its end parameter was originally 44.56263613...
If we reload this file its properties are: - Not reversed (CCW) - ratio is 0.42307692... - Parameters are 180 & 404.56263613... - The reported length is about 1993.21829743...
To replicate the issue you must draw over this ellipse shape: - EA ; Direction CCW - SR for snapping to references. - Indicate the major, minor, start and end point all by snapping to the original references.
You now have a copy of the provided ellipse shape. Select it with Alt-Select, it is the one without a length.
Properties are: - Not reversed (CCW) - ratio is 0.42307692... - Parameters are 180 & 44.56263613... - The reported length is NaN
I can replicate that for some other CCW ellipse arcs ... ... Perhaps given that the start parameter is 180 degrees. Also suspecting that it can be replicated for CW arcs.
For the record: A 2D wire Centroid for this shape also fails. Simply because it tests for the length reported by QCAD. It doesn’t start to approximate something that is about zero long.
Regards, CVH
|
|
173 | QCAD (main) | Feature Request | Low | explode text to letters | Assigned | |
1 |
Task Description
implement
|
|
208 | QCAD (main) | Feature Request | Low | SVG export: support custom line weights | Assigned | |
|
Task Description
Find way to support custom line weights for SVG export. See also forum thread: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1594
|
|
228 | QCAD (main) | Feature Request | Low | Insert current date (and other fields) | Assigned | |
9 |
Task Description
Insert field into drawing that displays current date, file name, ...
|
|
275 | QCAD (main) | Feature Request | Low | Rounding all corners of a polyline | Assigned | |
3 |
Task Description
Modify - Round - Click polyline - round all corners
|
|
277 | QCAD (main) | Feature Request | Low | command line arguments: allow class name after -exec | Assigned | |
|
Task Description
command line arguments: allow class name after -exec
|
|
293 | QCAD (main) | Feature Request | Low | multi-select for blocks | Assigned | |
|
Task Description
It would be nice if one could select multiple blocks in the block list at once (holding ctrl or ctrl+shift). Main purpose would be to delete them if they are not needed anymore. If possible, the same applies to layers.
|
|
316 | QCAD (main) | Feature Request | Low | Blocks list and selected block | Assigned | |
|
Task Description
Wouldn’t it be nice, if selecting a block in model view would somehow highlight (just like clicking a block in the list does) the selected block in the “Block List” window?
(Feature request sounds a little harsh, enhancement proposal would seem more apt.)
|
|
355 | QCAD (main) | Feature Request | Low | Remember function for dimension Option | Assigned | |
|
Task Description
I think it would be nice to have more flexibility for Prefix etc. option (not only the drop down with a given choice) and a remember function for all those fields like postfix and tolerance.
Why Remember Function: If I use a postfix like <>” in the postfix field I’m only able to use it for this particular dimension type at this time. If I change the type (from Horizontal to vertical or what ever) I have always to repeat my postfix. The same with tolerances.
|
|
396 | QCAD (main) | Feature Request | Low | Blocks: moving blocks: show bounding box | Assigned | |
|
Task Description
Blocks: moving complex blocks with drag and drop should show bounding box as preview
|
|
455 | QCAD (main) | Feature Request | Low | logical operations for polylines | Assigned | |
2 |
Task Description
A missing feature in my work are logical operations (combine, intersect, ..) for polylines
Example: Draw some elements, select them, say combine. The result will be the outline of all elements.
|
|
467 | QCAD (main) | Feature Request | Low | Feature request for new Arc tool option to add to Arc s... | Assigned | |
2 |
Task Description
For and behalf of mandrena
To add another Arc tool option in Arc tools set:
1.Specify Start point for Arc. 2.Specify End point for Arc. 3.Specify “Tangent” direction (without being restricted in input field) so you can visually select a point on your desired Tangent line!
|
|
500 | QCAD (main) | Feature Request | Low | Autohide Side Panel | Assigned | |
1 |
Task Description
it would be ideal to be able to have the option to autohide the side panel to increase the visible drawing space when working on a small screen.
|
|
502 | QCAD (main) | Feature Request | Low | Points on line: enter distance instead of number of poi... | Assigned | |
2 |
Task Description
Points on line: enter distance instead of number of points as a variant of the tool or as a new tool.
|
|
503 | QCAD (main) | Feature Request | Low | Convert entities to points with a fixed distance | Assigned | |
|
Task Description
Select lines, arcs, ... and convert them to points along the lines, arcs, ... with a fixed distance.
See also forum at: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1834
|
|
512 | QCAD (main) | Feature Request | Low | Modify stretch and Restrict ortho | Assigned | |
1 |
Task Description
The modify stretch tool wants first and second corner, start and end point, then starts afresh. When I turn on restrict horizontally eg to align two points between start and end, the restriction sticks and I have to call restrict none, to be able to perform the next iteration, set the first corner then.
So, in the quest for a comfortable user interface, it was nice, if the modify stretch first/second corners parameter setting was not affected by current restrict/ortho etc. settings. Actually, that does not make any sense at all anyways, does it, a rectangle is defined by two degrees of freedom, isnt it?
|
|
514 | QCAD (main) | Feature Request | Low | Punktpestimmung Intersection manual muss immer wieder n... | Assigned | |
|
Task Description
Beispiel: Zeichnen einer Linie (Line two points) mit Punktbestimmung. Wähle ich für die Punktbestimmung z.B. “End” bleibe ich in diesem Modus bis ich etwas anderes wähle. Gut
Wähle ich für die Punktbestimmung “Intersection manual” muss ich dies für jeden Punkt immer wieder neu anwählen. Schlecht
|
|
516 | QCAD (main) | Feature Request | Low | To add option to 'print only' selected area. | Assigned | |
2 |
Task Description
To add the option to ‘print only’ selected area in a drawing.
|
|
519 | QCAD (main) | Feature Request | Low | Press tab to access first control in options tool bar | Assigned | |
1 |
Task Description
See: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1867
Apparently this was possible in QCAD 2 due to the default behavior of Qt.
|
|
525 | QCAD (main) | Feature Request | Low | change the printed symbol of points | Assigned | |
1 |
Task Description
Hi,
in QCAD3 RC2 points were printed as crosses, in QCAD3 RC4 they are printed as (very little) points. I think this isn’t a bug but a feature.
It would be nice if one could change this behaviour / select the symbol of points.
Best regards - Stefan
This is a double post of http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5870#5870 as suggested there.
|
|
554 | QCAD (main) | Feature Request | Low | Auswahlbox sollte auch mit der Shift Taste Bereiche dem... | Assigned | |
|
Task Description
Ziehe ich mit der Maus eine normale Auswahlbox kann ich Elemente markieren. Möchte ich einzelne Bereiche wieder herausnehmen muss ich alle Elemente einzeln anklicken (mit gedrückter Shift Taste). Ich kann zwar dies komfortabler gestalten mit der Select → (De -) Select Contour Funktion welche aber erst über das Menue aufgerufen werden muss.
So wie ich einzelne Elemente mit der Maus auswählen und mit der Shift-Maus Funktion deselektieren kann wäre es schön wenn die Shift Taste auch bei Auswahlbereichen direkt zum deselektieren eingesetzt werden könnte.
|
|
564 | QCAD (main) | Feature Request | Low | Settings organisation in level | Assigned | |
|
Task Description
As an old professional “documentation writer and user inteface designer” but IMHO, I’m not convinced that the “Application preferences” are correctly organised for ease of understanding and using them. These settings are organised in 2 levels. Some of the first levels have their own settings (e.g. “Graphics view”) while most others don’t (e.g. “Load/save”). May I humbly suggest some consistency rules : - no sub-level if there is only one subject - no items on main level if there are already 1 or more sub-level(s). For instance : - sub-level “Default Dimension settings” under “Dimension” is the only sub-level : then move these items under main level “Dimension” and suppress the sub-level ; - the items under “Graphics view” main level (with several sub-levels)could be in a sub-level named “General” ; Actually, “Graphics view” main level is the only one which has both its own items and sub-levels )) ?
|
|
566 | QCAD (main) | Feature Request | Low | Shortkey for rectangle text rotation | Assigned | |
1 |
Task Description
I would like to get a shortkey like ‘+’ to rotate text at 90° clockwise.
|
|
579 | QCAD (main) | Feature Request | Low | Copy layers / blocks | Assigned | |
2 |
Task Description
Duplicate (copy, clone) a layer with or without entities on it. New name can be specified by user.
|
|
586 | QCAD (main) | Feature Request | Low | File open dialog with preview | Assigned | |
1 |
Task Description
Since this is not supported by Qt anymore, this would likely have to be implemented from scratch.
|
|
588 | QCAD (main) | Feature Request | Low | Bemaßung Prefix Dropdown mit eigenen Vorgaben erweitern... | Assigned | |
|
Task Description
Es wäre Arbeitserleichternd wenn ich bei den Optionen für Bemaßungen (Prefix/Postfix) eigene Präferenzen speichern könnte so das diese in allen Zeichnungen von mir verfügbar wären. Zudem wäre es wünschenswert dieses nicht nur bei den Prefix sondern auch bei den Postfix Angaben nutzen zu können was dann alle(?) Manipulationen erschlagen würde.
Siehe auch: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=1966
|
|
596 | QCAD (main) | Feature Request | Low | Tool "Lengthen" mit "Total" erweitern oder .... | Assigned | |
1 |
Task Description
Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.
Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.
Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.
Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel
|
|
598 | QCAD (main) | Feature Request | Low | Support tangents between ellipses | Assigned | |
2 |
Task Description
To add support for drawing tangents between ellipses.
See topic: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2003
|
|
601 | QCAD (main) | Feature Request | Low | Für Berechnungen neu zu erstellende Elemente Werte von ... | Assigned | |
|
Task Description
Es wäre schön wenn ich Werte wie zum Beispiel Längen von Linien direkt abgreifen könnte um diese weiter in Berechnungen verwenden zu können.
Beispiel: Ich habe eine Linie konstruiert wobei sich eine Länge y ergeben hat.
Nun möchte ich eine Linie zeichnen die 5 mal y sein soll.
Linientool → Wert 5* eingeben und y durch Auswahl mit der Maus von dem vorhandenen Elements übernehmen.
Natürlich könnte ich die Geometrie Info benutzen um den Wert abzulesen oder auch über die Zwischenablage zu benutzen. Ein abgreifen mit der Maus wäre aber schneller, direkter und wahrscheinlich auch mit weniger Fehlern (Human error) verbunden. Wahrscheinlich auch genauer da QCad, denke ich, mit mehr Nachkommastellen rechnet, oder?
|
|
604 | QCAD (main) | Feature Request | Low | Measure and record X,Y coordinates tool - add to info ... | Assigned | |
|
Task Description
Feature request See topic - http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2015
Just a thought, but one that could be useful for machinists in particular - a measurement tool that can snap to a point as per usual, but then just displays the drawing coordinates in X and Y. This could be expanded to the dimensions tool set, so that you can click on a point and print the coordinates next to it.
|
|
609 | QCAD (main) | Feature Request | Low | Clean up tool | Assigned | |
1 |
Task Description
To have a ‘clean up ' tool to:
- eradicate duplicate lines - eradicate stray points - remove empty layers - remove unused blocks
Perhaps with an initial dialog which allows the user to choose what they want to clean up.
|
|
612 | QCAD (main) | Feature Request | Low | Plot math functions | Assigned | |
1 |
Task Description
Input:
X axis min/max or choose line (?) or center (for polar functions)
function: y = f(x) / polar function: r = f(a)
Output:
function plot
|
|
614 | QCAD (main) | Feature Request | Low | Blocks - overwrite current layer yes/no ... | Assigned | |
|
Task Description
I would appreciate an option for the library Browser that gives me the possibility to decide by my self to use the current (same name) layer in my drawing or overwrite it with the existing layers in the library item.
Imagine the possibility’s of this feature ....
|
|
617 | QCAD (main) | Feature Request | Low | Different dimensions font sizes in the same drawing. | Assigned | |
|
Task Description
Different dimensions font sizes in the same drawing.
|
|
618 | QCAD (main) | Feature Request | Low | user defined lineweight | Assigned | |
2 |
Task Description
To have the option to set your own ‘user defined’ line weight.
|
|
620 | QCAD (main) | Feature Request | Low | option to have horizontal dimension info using vertical... | Assigned | |
2 |
Task Description
Some times I need to have the dimension info using the Vertical Dimension tool displayed horizontally. See attached image: Possibly this option could be added to the Label drop down menu.
|
|
622 | QCAD (main) | Feature Request | Low | Disproportianal scaling of arcs, ellipses | Assigned | |
|
Task Description
Support disproportional scaling also for arcs, ellipses, other entities, not only lines and polylines with only line segments.
|
|
625 | QCAD (main) | Feature Request | Low | Distribute block along spline, polyline, ... | Assigned | |
1 |
Task Description
See: http://www.youtube.com/watch?v=27bCgg3zLVA
|
|
628 | QCAD (main) | Feature Request | Low | Improve workflow for entering tool parameters | Assigned | |
|
Task Description
Provide keyboard shortcuts for options tool bar.
Under Linux, Windows Alt+Key shortcuts can be used. Mac OS X does not seem to support this.
See also suggestions at: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2053&view=unread#unread
|
|
631 | QCAD (main) | Feature Request | Low | Option "Scale" für das öffnen von Templates ... | Assigned | |
|
Task Description
Wenn ich eine Zeichnung plane überlege ich mir natürlich im Vorfeld welche Blattgröße und welchen Maßstab ich verwenden möchte.
Wenn ich Templates (z.B. Zeichnungsblatt A4) für die Blattgröße öffnen könnte und dabei direkt einen Skalierungsfaktor (z.B. 10) vorgeben könnte hätte ich ohne Umwege gleich alles was man braucht. In diesem Fall ein A4 Blatt im Maßstab 1:10.
Im Grunde genommen das selbe was ich bereits mit Library Items machen kann ...
|