QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  ascSeveritySummaryStatusProgress
2050QCAD Community EditionBug ReportVery LowFlexPainter dosen't workAssigned
0%
Task Description

FlexPainter works in the Pro version of QCad but not in the Comunity one.
If it’s not supposed to works in the latter, maybe, it would be better to remove it from the menu (Misc > Script Examples > Mathematics).

2068QCAD Community EditionBug ReportVery LowNon-english text in upper/lower index becomes UTF codeAssigned
0%
Task Description

How to reproduce.

1. Create a text field with some non-english words in the upper index. (see attached pic1.png)
2. Save the project and close QCAD.
3. Run QCAD and open same project.
4. Now upper/lower indexed text becomes not human readable UTF codes. (see attached pic2.png)

Tried different fonts - doesn’t help.

Linux ntb-kirill 3.10.0-1062.12.1.el7.x86_64 #1 SMP Tue Feb 4 23:02:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
CentOS Linux release 7.7.1908 (Core)

2088QCAD (main)Bug ReportVery Low column headers of the "General: tool settings " resize...Assigned
0%
Task Description

Open QCAD and the application preferences. In the section “General: tool settings " you can resize the columns: Menu, Shortcuts etc.
The problem is that it is not intuitive. The first divider is not selectable and the second moves the first, only backwards.

2092QCAD (main)Bug ReportLowcrash when changing shortcut in preferencesAssigned
0%
Task Description

The application crashes when I try to change a shortcut in the preferences. And only after resizing the preferences window.
In the attachement are the cli warnings.
I also tried the 3.24.3.9 snapshot with the same result.

2097QCAD (main)Bug ReportVery LowVery hard to snap to baseline reference point of dimens...Assigned
0%
Task Description

With default autosnap settings reference points included I find it very hard to snap to the baseline reference points of a dimension.
I manage to do it by setting snap to reference point only and zoom out till I see the entire dimension element.

2098QCAD (main)Bug ReportVery LowOffset will pick up hidden blocks while using it in a l...Assigned
0%
Task Description

When I’m drawing inside a layout block the offset tool picks up lines from blocks that are hidden.
It is not happening with all the block.

2099QCAD (main)Bug ReportLowDIM Label, Square Symbol doesn't adopt layer attributesAssigned
0%
Task Description

The square symbol offered as symbol in DIM label is the only symbol which doesn’t adopt the layer color.
If I print a drawing in full color it leads to a black symbol in an otherwise colored dimension.

It is also the only symbol which has a solid filling what is confusing when you work with it in Model_Space ...

2125QCAD (main)Bug ReportLowText disappears when you zoomWaiting on User
0%
Task Description

When I zoom, the text disappears in certain zoom levels after updating to the latest version.

756QCAD (main)Bug ReportLowDisplay problem in the Text "Character Map" ...Assigned
0%
1 Task Description

XP/32

Go to:
Text → Special Characters → Others → “Character Map” pops up.
Adjust Zoom to 100% = display problem (not enough space for the single character.

1214QCAD (main)Bug ReportLowArray of blocks -> Clipboard -> "flip pasted entities" ...Assigned
0%
1 Task Description

Case:

Select a block array,
put it with “Copy with reference” or “Cut with reference” into the clipboard,
choose a reference point which isn’t in the center of the array,
use the paste tool / with option “flip pasted entities”

If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point.
If I try to flip in both directions at the same time - you can’t see this effect.

1462QCAD (main)Bug ReportLowMac Trackpad zoom gesture not working as expectedAssigned
0%
1 Task Description

Hi,

I am using mac version and I have annoying issue with trackpad.
I use qcad primary with my trackpad and under application preferences (Graphics View/Navigation), my setting is as follows.
Mouse wheel / two finger swipe: Scroll (Trackpad...
Enable pan gesture : unticked (found that enabling this often goes into pan mode when I am just moving my pointer around)
Limit zoom and scroll to prevent overflows : ticked (hoping that this would prevent weird zooming issue. I will describe what I am experiencing later this page)
Reverse mouse wheel direction for zoom :unticked
Mouse wheel zoom factor: 1.02

Things work as expected:

  • panning with two finger swipe
  • and the rest

Issue I am experiencing:

Often, when I am zooming in and out with two finger gestures, the view suddenly sets to some weird state and my drawing goes off the ruler.
The mouse point remains where it is.

Workaround:
Reset viewpoint with autozoom and navigate around.

Expected zoom behaviour:
I expect viewpoint to zoom in / out at where my mouse pointer is or at least the centre of current view point.

1765QCAD (main)Bug ReportVery LowErrors with polyline offsetAssigned
0%
1 Task Description

Win 7 32 bit QCAD 3.20.1

Ofsset of a base-line with arcs results in massive ammount of errors.
Most of them occur as a cluster of very tiny segments and are part of the offset. (zoom far in at the red circles)
Mostly they occur where the offsetted arcs should merely be trimmend pairwise.
Some occur as detached entities or as detached strings of entities very near the offset (strings not documented).
Spooks occur at opposite site when base-line is not closed.
360° curls can occur with R = Offset.
Null-entities may occur (not documented, hard to find and not able to copy).

The base-line is checked and sound and has mixed tangentially or not tangentially connected arcs.
Offsetting the mother base-line of the base in the file has similar effect but not all and/or different ones.
Also encountered with offseting polys from fonts.
Used to define pocket paths for CNC.
Detected because the CNC driver will not accept Self-crossers, Null-entities or open ends depending on the settings.

Work arround is to explode and select small entities but this does not solves the issues.
1) Choosing the tolerance large enough will detect small segments that should stay.
2) Recombining will generate new ones at the place where the main segments remain crossed.
Cleaning up the paths is a daunting process with some thousand segments for several offsets.

I assume this has an infuence on the CAM part of QCAD too unless the offset method is different.

173QCAD (main)Feature RequestLowexplode text to lettersAssigned
0%
Task Description

implement

208QCAD (main)Feature RequestLowSVG export: support custom line weightsAssigned
0%
Task Description

Find way to support custom line weights for SVG export. See also forum thread: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1594

277QCAD (main)Feature RequestLowcommand line arguments: allow class name after -execAssigned
0%
Task Description

command line arguments: allow class name after -exec

293QCAD (main)Feature RequestLowmulti-select for blocksAssigned
0%
Task Description

It would be nice if one could select multiple blocks in the block list at once (holding ctrl or ctrl+shift). Main purpose would be to delete them if they are not needed anymore. If possible, the same applies to layers.

355QCAD (main)Feature RequestLowRemember function for dimension OptionAssigned
0%
Task Description

I think it would be nice to have more flexibility for Prefix etc. option (not only the drop down with a given choice) and a remember function for all those fields like postfix and tolerance.

Why Remember Function:
If I use a postfix like <>” in the postfix field I’m only able to use it for this particular dimension type at this time. If I change the type (from Horizontal to vertical or what ever) I have always to repeat my postfix. The same with tolerances.

396QCAD (main)Feature RequestLowBlocks: moving blocks: show bounding boxAssigned
0%
Task Description

Blocks: moving complex blocks with drag and drop should show bounding box as preview

455QCAD (main)Feature RequestLowlogical operations for polylinesAssigned
0%
Task Description

A missing feature in my work are logical operations (combine, intersect, ..) for polylines

Example:
Draw some elements, select them, say combine. The result will be the outline of all elements.

503QCAD (main)Feature RequestLowConvert entities to points with a fixed distanceAssigned
0%
Task Description

Select lines, arcs, ... and convert them to points along the lines, arcs, ... with a fixed distance.

See also forum at:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1834

514QCAD (main)Feature RequestLowPunktpestimmung Intersection manual muss immer wieder n...Assigned
0%
Task Description

Beispiel:
Zeichnen einer Linie (Line two points) mit Punktbestimmung.
Wähle ich für die Punktbestimmung z.B. “End” bleibe ich in diesem Modus bis ich etwas anderes wähle. Gut ;-)

Wähle ich für die Punktbestimmung “Intersection manual” muss ich dies für jeden Punkt immer wieder neu anwählen. Schlecht :-(

519QCAD (main)Feature RequestLowPress tab to access first control in options tool barAssigned
0%
Task Description

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1867

Apparently this was possible in QCAD 2 due to the default behavior of Qt.

525QCAD (main)Feature RequestLowchange the printed symbol of pointsAssigned
0%
Task Description

Hi,

in QCAD3 RC2 points were printed as crosses, in QCAD3 RC4 they are printed as (very little) points. I think this isn’t a bug but a feature. ;-)

It would be nice if one could change this behaviour / select the symbol of points.

Best regards - Stefan

This is a double post of http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5870#5870 as suggested there.

554QCAD (main)Feature RequestLowAuswahlbox sollte auch mit der Shift Taste Bereiche dem...Assigned
0%
Task Description

Ziehe ich mit der Maus eine normale Auswahlbox kann ich Elemente markieren.
Möchte ich einzelne Bereiche wieder herausnehmen muss ich alle Elemente einzeln anklicken (mit gedrückter Shift Taste).
Ich kann zwar dies komfortabler gestalten mit der Select → (De -) Select Contour Funktion welche aber erst über das Menue aufgerufen werden muss.

So wie ich einzelne Elemente mit der Maus auswählen und mit der Shift-Maus Funktion deselektieren kann wäre es schön wenn die Shift Taste auch bei Auswahlbereichen direkt zum deselektieren eingesetzt werden könnte.

564QCAD (main)Feature RequestLowSettings organisation in levelAssigned
0%
Task Description

As an old professional “documentation writer and user inteface designer” but IMHO, I’m not convinced that the “Application preferences” are correctly organised for ease of understanding and using them.
These settings are organised in 2 levels. Some of the first levels have their own settings (e.g. “Graphics view”) while most others don’t (e.g. “Load/save”). May I humbly ;-) suggest some consistency rules :
- no sub-level if there is only one subject
- no items on main level if there are already 1 or more sub-level(s).
For instance :
- sub-level “Default Dimension settings” under “Dimension” is the only sub-level : then move these items under main level “Dimension” and suppress the sub-level ;
- the items under “Graphics view” main level (with several sub-levels)could be in a sub-level named “General” ;
Actually, “Graphics view” main level is the only one which has both its own items and sub-levels ;-))) ?

566QCAD (main)Feature RequestLowShortkey for rectangle text rotationAssigned
0%
Task Description

I would like to get a shortkey like ‘+’ to rotate text at 90° clockwise.

586QCAD (main)Feature RequestLowFile open dialog with previewAssigned
0%
Task Description

Since this is not supported by Qt anymore, this would likely have to be implemented from scratch.

588QCAD (main)Feature RequestLowBemaßung Prefix Dropdown mit eigenen Vorgaben erweitern...Assigned
0%
Task Description

Es wäre Arbeitserleichternd wenn ich bei den Optionen für Bemaßungen (Prefix/Postfix) eigene Präferenzen speichern könnte so das diese in allen Zeichnungen von mir verfügbar wären.
Zudem wäre es wünschenswert dieses nicht nur bei den Prefix sondern auch bei den Postfix Angaben nutzen zu können was dann alle(?) Manipulationen erschlagen würde.

Siehe auch:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=1966

596QCAD (main)Feature RequestLowTool "Lengthen" mit "Total" erweitern oder ....Assigned
0%
Task Description

Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.

Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.

Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.

Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel ;-)

601QCAD (main)Feature RequestLowFür Berechnungen neu zu erstellende Elemente Werte von ...Assigned
0%
Task Description

Es wäre schön wenn ich Werte wie zum Beispiel Längen von Linien direkt abgreifen könnte um diese weiter in Berechnungen verwenden zu können.

Beispiel:
Ich habe eine Linie konstruiert wobei sich eine Länge y ergeben hat.

Nun möchte ich eine Linie zeichnen die 5 mal y sein soll.

Linientool → Wert 5* eingeben und y durch Auswahl mit der Maus von dem vorhandenen Elements übernehmen.

Natürlich könnte ich die Geometrie Info benutzen um den Wert abzulesen oder auch über die Zwischenablage zu benutzen. Ein abgreifen mit der Maus wäre aber schneller, direkter und wahrscheinlich auch mit weniger Fehlern (Human error) verbunden. Wahrscheinlich auch genauer da QCad, denke ich, mit mehr Nachkommastellen rechnet, oder?

604QCAD (main)Feature RequestLowMeasure and record X,Y coordinates tool - add to info ...Assigned
0%
Task Description

Feature request
See topic - http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2015

Just a thought, but one that could be useful for machinists in particular - a measurement tool that can snap to a point as per usual, but then just displays the drawing coordinates in X and Y. This could be expanded to the dimensions tool set, so that you can click on a point and print the coordinates next to it.

614QCAD (main)Feature RequestLowBlocks - overwrite current layer yes/no ...Assigned
0%
Task Description

I would appreciate an option for the library Browser that gives me the possibility to decide by my self to use the current (same name) layer in my drawing or overwrite it with the existing layers in the library item.

Imagine the possibility’s of this feature .... ;-)

622QCAD (main)Feature RequestLowDisproportianal scaling of arcs, ellipsesAssigned
0%
Task Description

Support disproportional scaling also for arcs, ellipses, other entities, not only lines and polylines with only line segments.

628QCAD (main)Feature RequestLowImprove workflow for entering tool parametersAssigned
0%
Task Description

Provide keyboard shortcuts for options tool bar.

Under Linux, Windows Alt+Key shortcuts can be used.
Mac OS X does not seem to support this.

See also suggestions at:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2053&view=unread#unread

631QCAD (main)Feature RequestLowOption "Scale" für das öffnen von Templates ...Assigned
0%
Task Description

Wenn ich eine Zeichnung plane überlege ich mir natürlich im Vorfeld welche Blattgröße und welchen Maßstab ich verwenden möchte.

Wenn ich Templates (z.B. Zeichnungsblatt A4) für die Blattgröße öffnen könnte und dabei direkt einen Skalierungsfaktor (z.B. 10) vorgeben könnte hätte ich ohne Umwege gleich alles was man braucht. In diesem Fall ein A4 Blatt im Maßstab 1:10.

Im Grunde genommen das selbe was ich bereits mit Library Items machen kann ... ;-)

637QCAD (main)Feature RequestLowViewports / View ListAssigned
0%
Task Description

1. The Scrollbars for each window in the Viewports has the same size like the normal used scrollbars for windows. If you are working on a normal size Monitor it “steals” a lot of “working space”. Is there any possibility to make the scrollbars smaller or just a line to separate the windows so that I have to navigate with Keyboard and mouse?

2. I thing the Viewports and the View List belongs together - is it possible to get a button in the “View List / Tool Bar” to choose a Viewport style instead of “walking” the long way over the “Drawing preferences” Menu?

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=47&t=2071

639QCAD (main)Feature RequestLowAbility to load a file of keyboard shortcutsAssigned
0%
Task Description

It would be useful if a file of keyboard shortcuts to commands could be loaded.

Then a set of shortcuts identical/based on the Autocad keyboard shortcuts can be loaded, making it much easier for Autocad users to migrate to your product.

There does seem to be some future functionality planned here, with the shortcut ‘scheme’ selector in Program Preferences, but for the moment ‘Qcad’ is the only option available.

This strategy is used to great effect by Draftsight (but who trusts a big company like Dassault/Solidworks...)

648QCAD (main)Feature RequestLowConfigurable behavior for line patterns at weight 0.00Assigned
0%
Task Description

A line with linestyle = dots and line weight = 0.00 appears in model space overly spaced, all other lineweights behave as expected.
Suspect other linestyles to behave in a similar fashion.

See attached drawing.

Suggested fix: use the same scaling for lineweight 0.00 as for lineweight 0.05.

670QCAD (main)Feature RequestLowConfigurable rendering options for stacked textAssigned
0%
Task Description

Customer wishes that stacked text used as subscript is rendered differently (i.e. increased text size, lower position for subscript).
This may also apply to superscripts.

674QCAD (main)Feature RequestLowTo add optional 'auto' dimension tracking feature.Assigned
0%
Task Description

It might be useful for some to have the option to turn on/off ' auto’ dimension tracking option.

See related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=2&p=6893#p6893

684QCAD (main)Feature RequestLowConfigurable behavior for using box selection with Shif...Assigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2180

695QCAD (main)Feature RequestLowAdd more dimension arrow styles (e.g. dots)Assigned
0%
Task Description

Add more dimension arrow styles (e.g. dots).

See forum thread:
http://qcad.org/rsforum/viewtopic.php?f=31&t=2185

703QCAD (main)Feature RequestLowInfo function -> contour for Hatch not closed ...Assigned
0%
Task Description

Task: If I like to make a hatch and the contour isn’t closed I get a Grey circle Info where the contour isn’t closed. Nice!

But ..... I have this Info only for ONE not proper connection and only for the moment when the mouse pointer is over the Hatch Tool Symbol.

If I have to zoom into the Problem - I will lose the Info where the problem is :-(

To get the “Problem Info” back I have to select it again - but for that I have to zoom out ............... ;-)

It would be nice to have this “Problem Info” longer in the drawing - maybe until I solved all problems.

And it would be nice to have ALL Infos for not connected lines at the same time. It is not really helpful to repeat this function 20times if I have 20 connection problems ... ;)

719QCAD (main)Feature RequestLowLibrary Browser additional Function ...Assigned
0%
Task Description

It would be nice to get:

In the Create Library Item task → “Save as” a remember Function for the last chosen Path to save the Item ... or a default path what is the same like the settings in the Application Preferences.
Right now you have to navigate again and again for every item what you will save in the same directory. If you have to save 20 items - it sacks ;-)

Also would it be nice for an easy “Clean up” to have the possibility to delete items directly in the Library Browser window.
Right now you have to use extern Programs like the Windows explorer to move or delete items.

724QCAD (main)Feature RequestLowUseless reference point entering when moving relativelyAssigned
0%
Task Description

Hi,
this is a usability feature request:

If you want to move an object relatively to any point (e.g. by entering @x;y in commandline) it does’nt make sense to enter a starting reference point. Of course this is possible by clicking to any location on the screen. But it’s difficult to change between mouse and keyboard so often.

It should be possible to enter a “don’t care” or “any” reference point by pressing a keyboard shortcut (e.g. enter like in AutoCAD).

Thx

747QCAD (main)Feature RequestLowDXF import: dimension labelAssigned
0%
Task Description

Add support for custom dimension labels created in 3rd party applications. Such labels may contain text that is stripped by QCAD.

757QCAD (main)Feature RequestLowDim: Architectural tick and Leader Arrow size independe...Assigned
0%
Task Description

Leader Arrow size and the Architectural tick size are controlled by one and the same value.

It would be nice to get the possibility to adjust them independently from each other ...

764QCAD (main)Feature RequestLowLinks to Data sheet, Part List ...Assigned
0%
Task Description

Most of our drawings have a Data sheet, parts List, cutting list, description etc etc on a pdf, world or excel file.

It would be nice to have a link possibility directly in QCAD to those files what will be saved with the drawing.
Like the bitmap function without displaying the files in the drawing ...

783QCAD (main)Feature RequestLowSave as .dgn option missing in 3.0.8?Assigned
0%
Task Description

Not really a bug I suppose but the save as.dgn file format is missing in snapshot 3.0.8 release.

Will this be available again soon?

787QCAD (main)Feature RequestLowHatch generator - plug in tool?Assigned
0%
Task Description

Would it be possible to make a Plug in tool for a Hatch generator, so custom made hatches can be saved as .pat files?

I have a lot of up and coming future projects that I would like to make my own ‘custom’ hatches for.

Showing tasks 51 - 100 of 396 Page 2 of 8 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing