QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatus  descProgress
2205QCAD (main)Bug ReportLowText rendering fails in certain zoom levelWaiting on fix in 3rd party library
0%
1 Task Description

Case:
Drawing with text, zoom in and out with one of the common methods, text will disappear in certain zoom level

Same drawing zoomed in and out in 3.20.0.0 doesn’t show this effect - works just fine.

1224QCAD (main)Feature RequestLowRevision cloudsLikely to be implemented
0%
7 Task Description

Add support to draw revision clouds or convert polylines, ellipses, circles to revision clouds.

1127QCAD (main)Feature RequestLowLeaders: spline shapedLikely to be implemented
0%
2 Task Description

Add support for spline shaped leaders

693QCAD (main)Feature RequestMediumSupport for external references (XREF)Likely to be implemented
0%
26 Task Description

Support for external references (XREF)

2125QCAD (main)Bug ReportLowText disappears when you zoomWaiting on User
0%
Task Description

When I zoom, the text disappears in certain zoom levels after updating to the latest version.

1285QCAD (main)Feature RequestLowProperty PainterResearching
0%
2 Task Description

Easy transfer of properties from one entity to others

2290QCAD (main)Bug ReportVery Lowloading the Drawing Preferences using enter, using ente...Assigned
0%
Task Description

I use CTRL + I to pull up drawing preferences. Upon changing the dimension settings quickly and closing it normally by pressing enter it closes. But if i go to the next tab (drawing tab) then press enter to load it up quickly instead of pressing CTRL + I. Upon changing the dimensions settings and pressing enter to close it, it won’t close but instead flash and i have to keep pressing enter and eventually it closes.

I think this is a bug.

I have the Pro Version

2289QCAD (main)Bug ReportLowVertical Line Tool stops accepting inputAssigned
0%
Task Description

When using the vertical line tool, you can enter a length value in the options toolbar, then place the line. If you want to change the length, you just need to enter a new value and the length field will update. However, there seem to be cases where after 10-20 entries, the focus goes off the length field in the options toolbar, requiring the user to bring focus back to continue. I could not seem to duplicate this behavior with the horizontal line tool.

2288QCAD (main)Feature RequestLowLayer State WidgetAssigned
0%
1 Task Description

The option of a layer state widget would be a nice way to see and select between different layer states.

2287QCAD (main)Feature RequestVery LowEvaluate draw order for preference "Prevent white-on-wh...Assigned
0%
Task Description

The Application Preference setting “Graphics View - Appearance - Prevent white-on-white/black-on-black display” seems to be a global setting that doesn’t take the draw order into account. For example: With the setting enabled, it prevents creating a white hatch of a higher draw order on top of a larger, colored hatch with lower draw order (background). The preference does not seem to evaluate if the object is truly drawn as “white-on-white”.

With the preference enabled, setting the object color as “white” will set the “white” color label, but the object color actually stays black. Its hard to determine why it happens in that case.

Is it possible to let the global preference setting be applied to objects after evaluation of the draw order, and determine if the object actually is a true case of white-on-white?

My workaround: Disable the preference setting (I think it is default = on), and only enable it for ad-hoc checks of hidden and overlooked objects.

2284QCAD (main)Bug ReportLowZooming in & out causes grid/snap scale value change in...Assigned
0%
1 Task Description

I have set the grid/snap value to X=.0625 Y=.0625 on all 4 viewports.
When zooming in and out the grid/snap scale changes from .0625 to 3.90625. at this point the grid/snap points differ,
This causes a variation in the grid/snap reference points lending to drawing errors.

example
When I use the grid settings defaults .01, when zooming in and out, the grid/snap scaling doesn’t seem to have this issue.
Other values do, See below.

set value first zoom second zoom next zoom

	point		point		point ...	

0.01 0.1 1.0 10.0 ...
0.02 0.04 0.4 4.0 ...
0.04 0.16 1.6 16.0 ...
0.05 0.25 2.5 25.0 ...
0.0625 0.390625 3.90625 39.0625 ...
0.0254 0.64516 6.4516 64.516 ...

Why is there a squaring of the original set value? Which then becomes a new zoomed grid/snap value?

QCAD Professional
Version: 3.26.4.0 (3.26.4)
Internet: QCAD.org
Build Date: Jun 3 2021
Revision: 0bb4334
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

2282QCAD (main)Feature RequestLowAdd a "Save As" command while editing blocks in placeAssigned
0%
1 Task Description

As a heavy mechanical drawings user, it would help a lot to have an option to exit a block saving as a new name and making it a new entity from that time ahead.

Example: if a have a lot of screws, one of then is behind another peace and need the to have some lines changed to hidden style lines, in the flow of the work is great if I edit that screw in place and when exiting have the option to save as a new block, to don’t mess with other entities of the same block that I don’t want to change. Yes, there is a workaround that is duplicate and rename the block prior to the editing, but a save as seems to work easier.

Thanks Andrew and team!

2272QCAD (main)Feature RequestLowSupport unit "US survey foot"Assigned
0%
Task Description

In the US, it is (unfortunately) still common to use US survey foot. It seems at least some DXF applications/libraries support this unit as a $INSUNITS value, some references:

There are two issues regarding this with QCAD:

  1. If you open a document with $INSUNITS being 21, it’s reset to 0 (unitless/unspecified) when saved again, even when not changing anything.
  2. It is not possible to select these units in the GUI.

I don’t know about standardization of these values, but my hope is that it’s at least possible to preserve the unit in an existing drawing. Given that this unit is supposed to be obsolete in some years, it might seem less important, but due to this transition, it might get even more important to be able to distinguish between units. Thanks!

2271QCAD (main)Bug ReportLowUnpredictable Crashing on Mac M1 Arm64Assigned
0%
Task Description

I am getting random crashing on my MacBook M1 chipset while using QCAD Pro. There is nothing in particular that you can do to replicate as the crashing is completely inconsistent. Have had it crash when pressing escape while using measurement tool, but have also had it crash while using the app and selecting a tool.

Included crash report, which has also been sent to Apple.

Thanks

2266QCAD (main)Bug ReportLowCrash while creating an angular dimensionAssigned
0%
Task Description

no task description

2264QCAD (main)Bug ReportLowHatching segment selection stops at entity - hatch patt...Assigned
0%
1 Task Description

QCAD Professional
Windows7 pro WinInstaller
Version: 3.26.4.5 (3.26.4.5)
Internet: QCAD.org
Build Date: Jul 20 2021
Revision: e596276
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

In the example given by ‘turtle’ .. why_is_this_not_closed-v2.dxf
https://www.qcad.org/rsforum/viewtopic.php?f=32&p=34157#p34153

Selecting hatch boundary segments of the horizontal polyline segment at
(1169.933593;274.432562)-(1089.933593;274.432562)

Segment selection stops where the AR-CONC hatch pattern touches the horizontal segment.
Such intersections points where already no longer regarded as snappoints.
See :
 FS#2090 : https://www.qcad.org/bugtracker/index.php?do=details&task_id=2090.
Related topic https://www.qcad.org/rsforum/viewtopic.php?&t=7340&p=28414#p28414

Regards,
CVH

2261QCAD (main)SuggestionVery LowQCAD change freehand tool to freehand spline toolAssigned
0%
Task Description

no task description

2252QCAD (main)Bug ReportLowFreeze / crash when selecting clamped splines (not crea...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8531

2248QCAD (main)Bug ReportVery LowThemes: east and west dock widget tabs facing the wrong...Assigned
0%
1 Task Description

Hi Andrew

In QcadCAM when using the new Themes or User Created Themes the Layer and Block Tabs Appear to be reversed in East and West Positions.
I have discussed this with forum user PeteVick and he cannot reproduce this behavior in Qcad Pro... he suggested submitting this bug report.
I didn’t notice this until he pointed it out and don’t expect it to be high on your list of things to do..

Best Regards
John Hyslop
PS We are both using Linux Mint 20.1 (64bit) which is based on Ubuntu

2242QCAD (main)SuggestionLowBill of MaterialsAssigned
0%
3 Task Description

It would be a very interesting feature to add to future versions.

I also use AutoCAD Mechanical 2012 and the BOM is synced with every balloon on the drawing. Making it easy to edit.

The core BOM accepts formula fields and we can easily calculate the mass of a part, with some Ifs and math.

The BOM that is shown in the actual drawing is more simplistic, and has just Part number, Quantity, Mass and the Description. But it’s related to the “core BOM”.

It’s a very interesting thing! It would be great on QCad.

2233QCAD/CAMFeature RequestLowMore selection options to select sheets for nestingAssigned
0%
Task Description

I’m often in the situation that I have to select for nesting 50+ sheets. Currently is only a Shift + left mouse click selection possible. It would be nice if QCAD/CAM could get for the nesting / sheet selection additional a mouse rectangle area selection.

2229QCAD (main)Feature RequestLowProperty Editor, option format property values as decim...Assigned
0%
Task Description

Angle Display is decimal although the decimal display is disabled in Application Preferences.

Format should be 17° 31’ 52” instead of 17.531111.

2227QCAD (main)Feature RequestLowCAM > CAM Export: post processor for tangential knife c...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=2&t=8342

2226QCAD (main)Feature RequestVery LowmacOS: support proxy iconAssigned
0%
Task Description

Support proxy icon in title bar. This can be used to move the file to another folder using drag and drop.

2216QCAD (main)SuggestionLowDIM modification cause overlapping textAssigned
0%
1 Task Description

When I modify partly a DIM with “Stretch” or changing one Extension line position with drag and drop the Value text is updated which is nice working. Unfortunately the previous value stays in place and is overwritten by the actual value. I think for a good readability the previous value should disappear in the moment when the new value is presented.

2213QCAD/CAMFeature RequestLowAllow editing Spindle Speed separately for each Toolpat...Assigned
0%
1 Task Description

Hello dear CAM developers!

I need to use the same tool at different spindle speed in a single machining file.
I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)

FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal.
I need to be able to do both engraving and cutting in a single file.
Alas! this laser tool is defined with a fix and unique number (99).
Therefore I cannot define different laser tools with different speeds.

Many thanks
Best regards.

2195QCAD (main)Feature RequestLowSaved views include memory of blockAssigned
0%
1 Task Description

When saving a view, it would be great if the view also saved which block (model space, layout block, or any other block) that was active at the time the view was saved and when the view is later re-activated, the corresponding block would re-activate.

2192QCAD (main)Feature RequestLowAdd "Define angle using mouse cursor" to Move and Rotat...Assigned
0%
2 Task Description

The “Define annge using mouse cursor” of the Rotate tool would be useful in the Move and Rotate Tool

2191QCAD (main)Feature RequestLowExtend the functionality of the Reorder toolAssigned
0%
3 Task Description

Add functions to the Reorder tool, similar to the functions of the counter tool, undo last step and start at any number, allowing corrections and restarting the tool part way through.

See the discussions at https://qcad.org/rsforum/viewtopic.php?f=32&t=8170

2190QCAD (main)Feature RequestLowOption for unidirectional dimensionsAssigned
0%
3 Task Description

An option for unidirectional dimensions, in addition to the default aligned dimensions.

2189QCAD (main)Feature RequestLowVertically and/or diagonally stacked fractions option.Assigned
0%
2 Task Description

The option for vertically and diagonally stacked fractions would be helpful for both the text creation tool and as the output of dimensions.

2182QCAD (main)Feature RequestLowSelect > Select PreviousAssigned
0%
3 Task Description

Select the previously selected entities.

2181QCAD (main)SuggestionVery LowApply more distinguishable Enabled and Disabled state i...Assigned
0%
1 Task Description

QCAD Professional
Win7 WinInstaller 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Related forum Topic:
https://qcad.org/rsforum/viewtopic.php?t=8015

CVH

2178QCAD (main)Bug ReportLowStored Color of text dimension changesAssigned
0%
1 Task Description

QCAD Pro 3.25.2.7 Win7 Wininstaller 32bit
Related Topic:
https://www.qcad.org/rsforum/viewtopic.php?&t=7954

Reported is that black is saved as #00004c (dark blue)
Radek (iMac (Retina 5K, 27-inch, 2017), Catalina 10.15.7 (19H114)

My system/installation saves black as #4c000 (dark red)

When using single primary colors these get reduced to #4c, #7f, #99, #cc & #ff.
The threshold for that are #00, #65, #8b, #b2 & #e5
See: DimColorScale (png & dxf)

8 standard CAD colors fail saving correct
Black (something with #4c)
Dark Red, Dark Green, Dark Blue, Dark Cyan, Dark Magenta, Dark Yellow
(#80 turns #7f)
& Gray
(#adadad instead of #a0a0a4)

As with Gray, when mixing the 3 colors it gets rather fuzzy ...
#505050 & #555555 both turn #5b5b5b
&
#464646 turns #4c4226

A snippet of my investigation is included in the topic
(45 files in a ZIP)

CVH

2177DocumentationSuggestionLowUpdate class_r_polyline.htmlAssigned
0%
1 Task Description

Include RPolyline.getLeftRightOutline() method in class_r_polyline.html

In use since 11 Sept 2020

CVH

2176QCAD (main)Bug ReportVery LowModify > Break out Manual: relevance of order of click ...Assigned
0%
1 Task Description

QCAD Professional
Windows 7; Win installer 32 bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Forum Topic: https://qcad.org/rsforum/viewtopic.php?t=7988
File included.
I have no intention to make 48 separate reports.

CVH

2174QCAD (main)Bug ReportLow[SOLVED] Numerous shortcomings when exploding Polylines...Assigned
0%
1 Task Description

QCAD Professional
Windows 7, Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Issues most likely unrelated to OS and installations before 3.25.
Related post:
https://qcad.org/rsforum/viewtopic.php?&t=7982

Flaws documented in full in attached dxf.
The dxf has meaningful Layer States.

4 Columns:
- Prior Art
- The test cases
- Actual results
- Results with proposed fix

Tried as many things as I can come up with.
Orange: Flaws
Red: Errors
Green: Good results (or as good as I can get them)

Solution(s) given in attached script explode.js
(I am just a simple guy and wouldn’t know how to file a pull request on GitHub ......)

In section: “explode polyline into line and arc segments”
group: “if (RPolyline.hasProxy() && polyline.hasWidths()) {....}”
All additions, updates & typos are marked with “CVH”, one can textual search for it.
Over-documented for sure.
Any Eaction is to debug in Windows and is obsolete.

Included PreferencesPage.ui is updated for the all Splines from Text fix
Still in consideration: Forcing cubic splines from text to degree 2 ...
... I am rather convinced ...

CVH

2169QCAD (main)Bug ReportLowMissing G-Code G00 X0 Y0 when placing hole at x0 y0Assigned
0%
Task Description

When placing a hole at x0 y0 there is no G00 x0 y0 in the exported G-Code.
So the first cut was made at the current position of the tool, not at x0 y0!

2167QCAD/CAMBug ReportLowComma format decimal separator fails ZSafety CAM config...Assigned
0%
1 Task Description

QCAD/CAM
Trial package Win installer 32 bit
Version: 3.25.2.0 (3.25.2)
Internet: QCAD.org
Build Date: Sep 4 2020
Revision: 4a61501
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Local decimal separator is ‘,’ (comma)
In CAM configuration .. Z Levels .. Safety level

Using nn,nnn the output is Nxx G0 Znn
Using nn.nnn the output is Nxx G0 Znn.nnn

Drop down boxes are all in dot format.
Didn’t try anything else yet ;-)

Regards,
CVH

2164QCAD/CAMFeature RequestLowAdd ability to pan the 3D view with a modifier key and ...Assigned
0%
1 Task Description

With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.

2162QCAD (main)SuggestionLowUpdate the parameter with simplify of RPolylineData & R...Assigned
0%
1 Task Description

Unrelated to OS, nor version

Reported Jun 23, 2020 in: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372

Status Dec 24, 2020: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372#p30955 Documentation is updated.
The Classes still refer to an ‘angleTolerance’.

Regards,
CVH

2161QCAD (main)Feature RequestLowMake Polyline from Selection (OC) configurable for simp...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Not related to OS, nor version.

The method Polyline from Segments (OC) can be configured for tolerance and simplification in the Options Toolbar.
The method Polyline from Selection (OG) has no UI or none showing.

OG retrieves a tolerance from QCAD.ini, what is initially not set:

    var tolerance = RSettings.getDoubleValue("PolylineFromSelection/Tolerance", 0.001);

The tolerance will be default = 0.001 similar as the default in AppPrefs.
The tolerance setting is included in QCAD.ini after changing the AppPrefs entry.

OG calls PolylineFromSelection.autoJoinSegments with this tolerance:

    var counter = PolylineFromSelection.autoJoinSegments(di, tolerance, this);

PolylineFromSelection.autoJoinSegments calls PolylineFromSegments.createPolylineShape
with simplification hard coded to true. (last parameter)

    // create polyline from line, arc, spline or open polyline entity:
    var polyline = PolylineFromSegments.createPolylineShape(
                    entity, doc, vTolerance, op, undefined,
                    traversed, callBacks, undefined, true);

I would like to see the simplification optional and default = true.

Regards,
CVH

2160QCAD (main)Bug ReportLowDraw > Polyline > Relocate Start Point: fails on polyli...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Origin:
I like to start my CAM paths at low curvature instead starting at high curvature.
Ellipses may explode with the startpoint at the tip. (file Y2)

Documented in 3.25.2.4, reproducible under 3.25.2.7

File included with 4 LayerStates
- Original Ellipses: Y1
- Exploded to polylines (32 segments): Y2
- Direct after XP, OR performs different on the left top one: Y3
- Faulty solutions by OR: Y4 (= saved state)

The results may differ with the saved explosions.

With the file.
Y1
TA
XP
Relocate startpoint with OR to an existing reference (called ‘End’)

Regards,
CVH

2159QCAD (main)Bug ReportLowDraw > Polyline > Polyline from Selection: may induce N...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Discovered in 3.25.2.4, reproducible under 3.25.2.7

Draw any open or closed chain of line entities.
Select All.
OC to Polyline.
Step through vertices.

No example file provided because these NaN values are not saved to a file.
More pronounced with lines as with arcs.
Less pronounced when recombining after an explosion.
Some methods clear these to value = void.
Some methods clear these to zero (OR).
Can also occur when adding segments to an existing polyline with OC.

Regards,
CVH

2157QCAD (main)Bug ReportLowControlpoint Spline exploded to polyline may induce NaN...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Documented in 3.25.2.4, reproducible under 3.25.2.7
In the attached file:
→ Explode the trial cases and locate NaN Widths.
→ These faulty widths are cleared while saving and reverting.
= work around.

Related Post: https://www.qcad.org/rsforum/viewtopic.php?t=7902#p30902
Related Topic: https://www.qcad.org/rsforum/viewtopic.php?t=7901
Related Commit: https://github.com/qcad/qcad/commit/fcd7929bced7ae328029c1aa2ee2aff2745709c6

Arctic_Eddie reports failing CAM offset at exactly these points !!!
Reported is a faulty arc with radius of over 360,000mm.
- I can not reproduce this under QCAD working further on the Polys with NaNs.
- However the direct offset of such controlpoint Splines is erroneous.
(see file in post 30902)

Arctic_Eddie reports arc radii of over 10,000mm.
- These don’t seem to be faulty.
- I agree that BiArc fitting should be bound to a lower and certainly to an upper limit.
- That should be huge otherwise faint curvature is represented by many
wobbles or too quick by straight lines.
(All this, keeping in mind that QCAD doesn’t return the optimum fitted BiArc, see: https://www.qcad.org/rsforum/viewtopic.php?t=4859)

Regards,
CVH

2155QCAD (main)Bug ReportVery LowFaulty rendering Polyline Arcs with Width = 2RAssigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Most likely not related to the QCAD version, rather an old sore.

File included
Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7889#p30803
Confirmed by ‘cccplex’ Linux ‘Latest Ubuntu’

Polyline arcs with Width = 2R render as circle segments rather than circle sectors.
As Non-reversed arcs these don’t explode.
As reversed arc these explode to a single arc rather than a circle sector contour.

There is also still the faulty rendering with Z not zero
https://qcad.org/bugtracker/index.php?do=details&task_id=1923

Regards,
CVH

2149QCAD (main)SuggestionVery LowAllow undo after auto trim self-intersecting with AX in...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can auto trim (AX):
- The lower loop.
- The top loop.
Bug?
The action on the top loop can’t be undone.

Regards
CVH

2148QCAD (main)SuggestionVery LowAllow undo after breaking up self-intersecting with D2 ...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can break out segment (D2):
- removing one of the loops with the ‘remove’ option.
- leaving both without the ‘remove’ option.
Bug?
Without the ‘remove’ option it can’t be undone.

Regards
CVH

2147QCAD (main)SuggestionVery LowAllow breaking up self-intersecting a 2e time (at endpo...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can cut (DI) once.
Cutting the second segment results in NO cut.

Regards
CVH

2146QCAD (main)SuggestionVery LowKeep 'Invisible' objects invisible while savingAssigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Related topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7882
Explanation found in REntity.cpp
Listed as a Public Member Functions inherited from RObject

Regards,
CVH

Showing tasks 1 - 50 of 435 Page 1 of 91 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing