QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  desc
2148QCAD (main)SuggestionVery LowAllow undo after breaking up self-intersecting with D2 ...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can break out segment (D2):
- removing one of the loops with the ‘remove’ option.
- leaving both without the ‘remove’ option.
Bug?
Without the ‘remove’ option it can’t be undone.

Regards
CVH

2149QCAD (main)SuggestionVery LowAllow undo after auto trim self-intersecting with AX in...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can auto trim (AX):
- The lower loop.
- The top loop.
Bug?
The action on the top loop can’t be undone.

Regards
CVH

2155QCAD (main)Bug ReportVery LowFaulty rendering Polyline Arcs with Width = 2RAssigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Most likely not related to the QCAD version, rather an old sore.

File included
Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7889#p30803
Confirmed by ‘cccplex’ Linux ‘Latest Ubuntu’

Polyline arcs with Width = 2R render as circle segments rather than circle sectors.
As Non-reversed arcs these don’t explode.
As reversed arc these explode to a single arc rather than a circle sector contour.

There is also still the faulty rendering with Z not zero
https://qcad.org/bugtracker/index.php?do=details&task_id=1923

Regards,
CVH

2157QCAD (main)Bug ReportLowControlpoint Spline exploded to polyline may induce NaN...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Documented in 3.25.2.4, reproducible under 3.25.2.7
In the attached file:
→ Explode the trial cases and locate NaN Widths.
→ These faulty widths are cleared while saving and reverting.
= work around.

Related Post: https://www.qcad.org/rsforum/viewtopic.php?t=7902#p30902
Related Topic: https://www.qcad.org/rsforum/viewtopic.php?t=7901
Related Commit: https://github.com/qcad/qcad/commit/fcd7929bced7ae328029c1aa2ee2aff2745709c6

Arctic_Eddie reports failing CAM offset at exactly these points !!!
Reported is a faulty arc with radius of over 360,000mm.
- I can not reproduce this under QCAD working further on the Polys with NaNs.
- However the direct offset of such controlpoint Splines is erroneous.
(see file in post 30902)

Arctic_Eddie reports arc radii of over 10,000mm.
- These don’t seem to be faulty.
- I agree that BiArc fitting should be bound to a lower and certainly to an upper limit.
- That should be huge otherwise faint curvature is represented by many
wobbles or too quick by straight lines.
(All this, keeping in mind that QCAD doesn’t return the optimum fitted BiArc, see: https://www.qcad.org/rsforum/viewtopic.php?t=4859)

Regards,
CVH

2159QCAD (main)Bug ReportLowDraw > Polyline > Polyline from Selection: may induce N...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Discovered in 3.25.2.4, reproducible under 3.25.2.7

Draw any open or closed chain of line entities.
Select All.
OC to Polyline.
Step through vertices.

No example file provided because these NaN values are not saved to a file.
More pronounced with lines as with arcs.
Less pronounced when recombining after an explosion.
Some methods clear these to value = void.
Some methods clear these to zero (OR).
Can also occur when adding segments to an existing polyline with OC.

Regards,
CVH

2160QCAD (main)Bug ReportLowDraw > Polyline > Relocate Start Point: fails on polyli...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Origin:
I like to start my CAM paths at low curvature instead starting at high curvature.
Ellipses may explode with the startpoint at the tip. (file Y2)

Documented in 3.25.2.4, reproducible under 3.25.2.7

File included with 4 LayerStates
- Original Ellipses: Y1
- Exploded to polylines (32 segments): Y2
- Direct after XP, OR performs different on the left top one: Y3
- Faulty solutions by OR: Y4 (= saved state)

The results may differ with the saved explosions.

With the file.
Y1
TA
XP
Relocate startpoint with OR to an existing reference (called ‘End’)

Regards,
CVH

2161QCAD (main)Feature RequestLowMake Polyline from Selection (OC) configurable for simp...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Not related to OS, nor version.

The method Polyline from Segments (OC) can be configured for tolerance and simplification in the Options Toolbar.
The method Polyline from Selection (OG) has no UI or none showing.

OG retrieves a tolerance from QCAD.ini, what is initially not set:

    var tolerance = RSettings.getDoubleValue("PolylineFromSelection/Tolerance", 0.001);

The tolerance will be default = 0.001 similar as the default in AppPrefs.
The tolerance setting is included in QCAD.ini after changing the AppPrefs entry.

OG calls PolylineFromSelection.autoJoinSegments with this tolerance:

    var counter = PolylineFromSelection.autoJoinSegments(di, tolerance, this);

PolylineFromSelection.autoJoinSegments calls PolylineFromSegments.createPolylineShape
with simplification hard coded to true. (last parameter)

    // create polyline from line, arc, spline or open polyline entity:
    var polyline = PolylineFromSegments.createPolylineShape(
                    entity, doc, vTolerance, op, undefined,
                    traversed, callBacks, undefined, true);

I would like to see the simplification optional and default = true.

Regards,
CVH

2162QCAD (main)SuggestionLowUpdate the parameter with simplify of RPolylineData & R...Assigned
0%
1 Task Description

Unrelated to OS, nor version

Reported Jun 23, 2020 in: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372

Status Dec 24, 2020: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372#p30955 Documentation is updated.
The Classes still refer to an ‘angleTolerance’.

Regards,
CVH

2167QCAD/CAMBug ReportLowComma format decimal separator fails ZSafety CAM config...Assigned
0%
1 Task Description

QCAD/CAM
Trial package Win installer 32 bit
Version: 3.25.2.0 (3.25.2)
Internet: QCAD.org
Build Date: Sep 4 2020
Revision: 4a61501
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Local decimal separator is ‘,’ (comma)
In CAM configuration .. Z Levels .. Safety level

Using nn,nnn the output is Nxx G0 Znn
Using nn.nnn the output is Nxx G0 Znn.nnn

Drop down boxes are all in dot format.
Didn’t try anything else yet ;-)

Regards,
CVH

2174QCAD (main)Bug ReportLow[SOLVED] Numerous shortcomings when exploding Polylines...Assigned
0%
1 Task Description

QCAD Professional
Windows 7, Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Issues most likely unrelated to OS and installations before 3.25.
Related post:
https://qcad.org/rsforum/viewtopic.php?&t=7982

Flaws documented in full in attached dxf.
The dxf has meaningful Layer States.

4 Columns:
- Prior Art
- The test cases
- Actual results
- Results with proposed fix

Tried as many things as I can come up with.
Orange: Flaws
Red: Errors
Green: Good results (or as good as I can get them)

Solution(s) given in attached script explode.js
(I am just a simple guy and wouldn’t know how to file a pull request on GitHub ......)

In section: “explode polyline into line and arc segments”
group: “if (RPolyline.hasProxy() && polyline.hasWidths()) {....}”
All additions, updates & typos are marked with “CVH”, one can textual search for it.
Over-documented for sure.
Any Eaction is to debug in Windows and is obsolete.

Included PreferencesPage.ui is updated for the all Splines from Text fix
Still in consideration: Forcing cubic splines from text to degree 2 ...
... I am rather convinced ...

CVH

2176QCAD (main)Bug ReportVery LowModify > Break out Manual: relevance of order of click ...Assigned
0%
1 Task Description

QCAD Professional
Windows 7; Win installer 32 bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Forum Topic: https://qcad.org/rsforum/viewtopic.php?t=7988
File included.
I have no intention to make 48 separate reports.

CVH

2177DocumentationSuggestionLowUpdate class_r_polyline.htmlAssigned
0%
1 Task Description

Include RPolyline.getLeftRightOutline() method in class_r_polyline.html

In use since 11 Sept 2020

CVH

2178QCAD (main)Bug ReportLowStored Color of text dimension changesAssigned
0%
1 Task Description

QCAD Pro 3.25.2.7 Win7 Wininstaller 32bit
Related Topic:
https://www.qcad.org/rsforum/viewtopic.php?&t=7954

Reported is that black is saved as #00004c (dark blue)
Radek (iMac (Retina 5K, 27-inch, 2017), Catalina 10.15.7 (19H114)

My system/installation saves black as #4c000 (dark red)

When using single primary colors these get reduced to #4c, #7f, #99, #cc & #ff.
The threshold for that are #00, #65, #8b, #b2 & #e5
See: DimColorScale (png & dxf)

8 standard CAD colors fail saving correct
Black (something with #4c)
Dark Red, Dark Green, Dark Blue, Dark Cyan, Dark Magenta, Dark Yellow
(#80 turns #7f)
& Gray
(#adadad instead of #a0a0a4)

As with Gray, when mixing the 3 colors it gets rather fuzzy ...
#505050 & #555555 both turn #5b5b5b
&
#464646 turns #4c4226

A snippet of my investigation is included in the topic
(45 files in a ZIP)

CVH

2181QCAD (main)SuggestionVery LowApply more distinguishable Enabled and Disabled state i...Assigned
0%
1 Task Description

QCAD Professional
Win7 WinInstaller 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Related forum Topic:
https://qcad.org/rsforum/viewtopic.php?t=8015

CVH

2195QCAD (main)Feature RequestLowSaved views include memory of blockAssigned
0%
1 Task Description

When saving a view, it would be great if the view also saved which block (model space, layout block, or any other block) that was active at the time the view was saved and when the view is later re-activated, the corresponding block would re-activate.

2205QCAD (main)Bug ReportLowText rendering fails in certain zoom levelWaiting on fix in 3rd party library
0%
1 Task Description

Case:
Drawing with text, zoom in and out with one of the common methods, text will disappear in certain zoom level

Same drawing zoomed in and out in 3.20.0.0 doesn’t show this effect - works just fine.

2213QCAD/CAMFeature RequestLowAllow editing Spindle Speed separately for each Toolpat...Assigned
0%
1 Task Description

Hello dear CAM developers!

I need to use the same tool at different spindle speed in a single machining file.
I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)

FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal.
I need to be able to do both engraving and cutting in a single file.
Alas! this laser tool is defined with a fix and unique number (99).
Therefore I cannot define different laser tools with different speeds.

Many thanks
Best regards.

2216QCAD (main)SuggestionLowDIM modification cause overlapping textAssigned
0%
1 Task Description

When I modify partly a DIM with “Stretch” or changing one Extension line position with drag and drop the Value text is updated which is nice working. Unfortunately the previous value stays in place and is overwritten by the actual value. I think for a good readability the previous value should disappear in the moment when the new value is presented.

2248QCAD (main)Bug ReportVery LowThemes: east and west dock widget tabs facing the wrong...Assigned
0%
1 Task Description

Hi Andrew

In QcadCAM when using the new Themes or User Created Themes the Layer and Block Tabs Appear to be reversed in East and West Positions.
I have discussed this with forum user PeteVick and he cannot reproduce this behavior in Qcad Pro... he suggested submitting this bug report.
I didn’t notice this until he pointed it out and don’t expect it to be high on your list of things to do..

Best Regards
John Hyslop
PS We are both using Linux Mint 20.1 (64bit) which is based on Ubuntu

2264QCAD (main)Bug ReportLowHatching segment selection stops at entity - hatch patt...Assigned
0%
1 Task Description

QCAD Professional
Windows7 pro WinInstaller
Version: 3.26.4.5 (3.26.4.5)
Internet: QCAD.org
Build Date: Jul 20 2021
Revision: e596276
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

In the example given by ‘turtle’ .. why_is_this_not_closed-v2.dxf
https://www.qcad.org/rsforum/viewtopic.php?f=32&p=34157#p34153

Selecting hatch boundary segments of the horizontal polyline segment at
(1169.933593;274.432562)-(1089.933593;274.432562)

Segment selection stops where the AR-CONC hatch pattern touches the horizontal segment.
Such intersections points where already no longer regarded as snappoints.
See :
 FS#2090 : https://www.qcad.org/bugtracker/index.php?do=details&task_id=2090.
Related topic https://www.qcad.org/rsforum/viewtopic.php?&t=7340&p=28414#p28414

Regards,
CVH

2282QCAD (main)Feature RequestLowAdd a "Save As" command while editing blocks in placeAssigned
0%
1 Task Description

As a heavy mechanical drawings user, it would help a lot to have an option to exit a block saving as a new name and making it a new entity from that time ahead.

Example: if a have a lot of screws, one of then is behind another peace and need the to have some lines changed to hidden style lines, in the flow of the work is great if I edit that screw in place and when exiting have the option to save as a new block, to don’t mess with other entities of the same block that I don’t want to change. Yes, there is a workaround that is duplicate and rename the block prior to the editing, but a save as seems to work easier.

Thanks Andrew and team!

2284QCAD (main)Bug ReportLowZooming in & out causes grid/snap scale value change in...Assigned
0%
1 Task Description

I have set the grid/snap value to X=.0625 Y=.0625 on all 4 viewports.
When zooming in and out the grid/snap scale changes from .0625 to 3.90625. at this point the grid/snap points differ,
This causes a variation in the grid/snap reference points lending to drawing errors.

example
When I use the grid settings defaults .01, when zooming in and out, the grid/snap scaling doesn’t seem to have this issue.
Other values do, See below.

set value first zoom second zoom next zoom

	point		point		point ...	

0.01 0.1 1.0 10.0 ...
0.02 0.04 0.4 4.0 ...
0.04 0.16 1.6 16.0 ...
0.05 0.25 2.5 25.0 ...
0.0625 0.390625 3.90625 39.0625 ...
0.0254 0.64516 6.4516 64.516 ...

Why is there a squaring of the original set value? Which then becomes a new zoomed grid/snap value?

QCAD Professional
Version: 3.26.4.0 (3.26.4)
Internet: QCAD.org
Build Date: Jun 3 2021
Revision: 0bb4334
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

2293QCAD (main)Feature RequestLowinsert attributes into a point elementAssigned
0%
1 Task Description

Would it be possible to extend the tool for importing points with a label so that when importing points into the drawing (as it is now), the attributes of the point are taken from the csv file and written to the point’s own properties? See attachment. This would extend the functionality of the tool and I assume that it would also lay the foundation for the possible re-export of such points from the drawing to a csv file, including all the details.

2301QCAD (main)Feature RequestLowRotate preview on/offAssigned
0%
1 Task Description

Hi,

I believe prior QCAD version 3.22.0.0 there was no rotating preview. The rotating preview shows the outcome regarding to the chosen center point. I know that it is also common for move/copy. However, for me it is very confusing and difficult to chose the correct center point for a rotation if I’m constantly been distracted by the most of the time overlapping preview of my selection. This said if the drawing is very detailed I have to zoom in extremely to be able to snap to the right entity. That wouldn’t be necessary without the preview. Additional rotate a large drawing selections will compromise the performance - CPU is going like crazy.

It would be nice to have an option to turn this preview on/off.

2302QCAD (main)Bug ReportVery Lowpolygon.getSelfIntersectionPoints(tol) returns 3th inva...Assigned
0%
1 Task Description

Windows 7 pro 32 bit msi-Installer
Version: 3.26.4.5 (3.26.4.5)
Internet: QCAD.org
Build Date: Jul 20 2021
Revision: e596276
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Andrew,

In the attached dxf:
Besides that it is clear that duplicate vectors are not filtered ...
Where a segment is crossing in another node a non valid node is returned as self-intersection point.
Seems to be unrelated to CW/CCW or tolerance.

Where 2 nodes coexists 4 duplicate vectors are returned.

Regards,
CVH

2316QCAD (main)Feature RequestLowModify > Detect Duplicates: implement for infinite line...Assigned
0%
1 Task Description

Headline should already explain the issue ... ;-)

2338QCAD (main)Feature RequestLowShow non-QCAD custom XDATA optionallyAssigned
0%
1 Task Description

QCAD (before version 3.27?) used to show some custom XDATA, e.g. tag 1000, even for application names that are not “QCAD”, which for me was useful, so it’s somewhat of a regression. (I think it was broken when selecting multiple items, maybe that’s why it was removed.)

I suggest to bring that feature back, but maybe show it only when a single element is selected if that’s easier.

(As a workaround/hack I guess it would be possible to rewrite the required information as QCAD compatible XDATA externally I guess.)

2341QCAD (main)Feature RequestLowmanage image referencesAssigned
0%
1 Task Description

QCAD. ver. 3.27.1.0 (3.27.1)
Qt version: 5.13.2
Architecture: x86_64
OS Windows 11

It might be useful to have the possibility to manage the references of the images contained within the drawing. A design could use recurring images, stored in a folder outside the one in which the design is located. Moving the drawing or folders (or changing the PC) will lose the folder references and the images are not displayed when the drawing is opened again.
I imagine the possibility to view the references of the images (and if necessary modify manually or with a pointer) with the option of: attach, detach, reload, etc., as in the example below (referred to ActCad - based on Intellicad technology)

2347QCAD (main)Bug ReportLowModify / Clip to rectangle issueAssigned
0%
1 Task Description

The tool “Clip to rectangle” / “Cut at Area Boundary” tool used on an area with lines and arcs will partly complete arcs to circles.

2348QCAD (main)Bug ReportLowtext in simple format do not save position after save t...Assigned
0%
1 Task Description

How to reproduce the bug:
1-open a new file
2-select text tool, simple text(one line,no formatting) and alignment in base-left
3-write some text in somewhere position in the draw, repeat this in others positions
4-save the file in .dxf R15 [2000/LT2000] (dxflib) format
5-close Qcad
6-open the saved file, the writhed text lose original position and now all the text have 0,0 position

2351QCAD (main)Feature RequestLowFile Thumbnail PreviewAssigned
0%
1 Task Description

Could we please implement the ability to display file contents in the file explorer. This would make it easier to decide which files to open.

2370QCAD (main)Feature RequestLowRetain global width / segment widths when reversing pol...Assigned
0%
1 Task Description

Andrew,

Changing orientation of a polyline with RV or by changing it in the Property Editor clears the global width value.

Single line pieces as polyline default to CCW.
Still the global width is cleared when trying to set them CW.

I didn’t update since 3.27.0 but reading this topic I suppose it still is valid.
Related: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9362

Regards,
CVH

2371QCAD (main)SuggestionLowInclude more properties for polylines in the Selection ...Assigned
0%
1 Task Description

Andrew,

Not OS or Version depending.

We can’t filter on some specific properties of polylines.

Handy would be:
- Global Width
- Orientation

Specific:
- Polyline Pattern
But I don’t really search for them ... For some post-op I just need them all to be set to ‘No’.
- # of vertices
Filtering the complex from the more simple ones.
- Including Bulges or not
To seperate polylines with arc segments form others.
There some operations that don’t really work with bulging.
- Z values and/or global Z
This would make sense for some but filtering on Z is not common under QCAD as it is 2D.

Regards,
CVH

2374QCAD/CAMFeature RequestLowAdd Spindle Speed to Toolpath DialogAssigned
0%
1 Task Description

When editing an existing toolpath to update the parameters of the selected tool, we can update the Feed Rate and the Plunge Rate, but I couldn’t find any way to update the Spindle Speed.

Even when using the Edit Tool KE button, we can edit parameters of the tool on concern but none of the modification is applied to the current Toolpath because as I see, tools parameters are copied fron tools definitions to a Toolpath only at creation of this Toolpath, but Toolpath are not updated accordingly.

Could you please add an edit field for Spindle Speed in the CAM Profile Toolpath window?

Many thanks’, and best regards.

2390QCAD (main)Feature RequestLowPlease add U.S. Survey Feet to the Unit / convert listAssigned
0%
1 Task Description

Yes I’m aware that the U.S. survey foot has to be discontinuing December, 31, 22. However - as we’ve learned in the past it takes decades until a unit will disappears for good. ;-)

See also:

https://www.qcad.org/rsforum/viewtopic.php?f=8&t=9493&p=38245#p38245

2397QCAD (main)Bug ReportLowPost processor "LaserGBRL (offset) [mm] fails at tabsAssigned
0%
1 Task Description

Post processor “LaserGBRL (offset) [mm] fails to turn off/on (M5, M4) at Tabs.

Forum topic:
https://www.qcad.org/rsforum/viewtopic.php?f=85&t=9552&p=38496#p38495

2406QCAD (main)Bug ReportLowSVG Export incorrect on blocksAssigned
0%
1 Task Description

When using SVG export on a drawing with a block defined, the export is incorrect. Arcs are drawn incorrectly and parts of the block are missing. If that block is exploded, the SVG export is correct. Attached is a block on the lower left and the same block on the lower right after explode. Also attached is the resulting SVG file.
This is not always the case. Some blocks are correctly exported to SVG. The upper row is again a block on the left and the same block exploded on the right. It exports properly.

2415QCAD (main)Bug ReportVery LowIssues with OffsetBothSidesAssigned
0%
1 Task Description

Andrew,

I can’t find any documentation concerning OffsetBothSides under Misc .. Modify.
It is not listed in the QCAD features nor in the changelog.

There was a Feature Request FS#1130 for this, I think you might want to close that as being implemented.

The tool asks for a Line, Arc, Circle, Ellipse, Spline or Polyline.
It also seems to act on shapes that can be exploded to such entities like Text, Dimension and Hatch entities.

There may be many ‘Result loop not closed’ or ‘No offsets possible’ warnings when hovering over entities on a drawing.
The preview may be partially, one or two sided and even two sided partially and closed with semi-circles.

I only successfully created a dual offset for open Splines, open or logically open Polylines.
All other attempts result in a single offset at the indicated side.

There are the usual exceptions for Polylines with arc-segments but that is related to small arc segments and being tangentially connected.
Only tested it on a Win7 platform.
I don’t suspect that version 3.27.8 includes a fix for that ... ;-)

Regards,
CVH

2416QCAD (main)Feature RequestLowAutomatically set a proper alternating row color for th...Assigned
0%
1 Task Description

Andrew,

When switching from Default to Dark mode the text on alternating rows is hardly visible.
We can customize this color.

It would be easier if a proper default color is set on switching to and back.

Perhaps the user preferences can be remembered.
Perhaps only when the contrast would be affected.

Regards,
CVH

2421QCAD (main)Feature RequestLowMake the preview of Shorten (LE) more visibleAssigned
0%
1 Task Description

Andrew,

When we use Lengthen/Shorten (LE) with a positive amount the result is clearly visible when indicating a side of an entity.
With a negative amount there is seemingly no preview.
It is generated and shown but one can not distinguish it especially with solid lines.

Adding an orthogonal auxiliary preview shape some N pixels long would do the trick. ;-)

Regards,
CVH

2428QCAD (main)Feature RequestLowImplement reversing Leader entities on creation or afte...Assigned
0%
1 Task Description

Andrew,

Usually I point to something to start with.
Sometimes I want to point away from here but then the arrow is where I just clicked.

An option on creation would be nice.
The capability to reverse the Leader orientation afterwards is another method to get it pointing the intended way.

A Leader entity is stored similar as a polyline.
I think it would not be difficult to reverse the basic polyline and update the dimension shape accordingly.

Regards,
CVH

2436QCAD (main)Feature RequestLowDraw > Hatch > Hatch from Segments: mark position of op...Assigned
0%
1 Task Description

Case description: “Hatch from Segments” (HS) detects correctly an open loop but fails then to set the circle marker for an easy visuelle identification.

Same scenario tested with “Hatch from Selection” (HA) ...
... everything works like a charm ;-)

2440QCAD (main)Bug ReportVery LowHatch from Segments > False positives open loop warning...Assigned
0%
1 Task Description

Andrew,

Most probably not related to OS or QCAD version.

When hatching an area with Hatch from Segments (HS) there might be false positive warnings on open loops.
It seems that this is related to the orientation of the indicated segments and the order of selection.
The real problematic position is not always the first that is reported.
Loop count is increased even if it is a single loop.

Included a basic test drawing to replicate these.
Further details to replicate the issue are in the file.

Regards,
CVH

2446QCAD (main)Feature RequestLowExtending dimension line beyond extension line when usi...Assigned
0%
1 Task Description

I would like the ability to extend dimension lines beyond the extension line when using tick marks. Images are attached and posted here: https://qcad.org/rsforum/viewtopic.php?f=31&t=9785

2448QCAD (main)Feature RequestLowScale lineweight display on model spaceAssigned
0%
1 Task Description

Currently, the model space can display lineweights at scale 1:1
It’s very convenient when drawing small objects that will be printed at scale 1:1 : it makes it easy to anticipate the final aspect of the printed drawing.
But this feature is unusable for architects or users who draw large objects.

Therefore, it would be very useful to have a factor to multiply lineweight display in model space.
For example : if i know my drawing will probably be printed at scale 1:50, i set the value of the lineweight factor to 50.
Then every line would be displayed 50x thicker in model space.

2452QCAD (main)Feature RequestVery LowKeyboard Shortcut for Undo Last Point While Drawing Spl...Assigned
0%
1 Task Description

Instead of having to click on the toolbar, it would be useful to have a keyboard shortcut for undoing the last fit point (or control point) while drawing splines. Preferably it would also be nice to allow the user the ability to set what the keyboard shortcut is for this function.

2453QCAD (main)Bug ReportLowControl point Splines - Issue with Closed & Minimal poi...Assigned
0%
1 Task Description

Andrew,
For more detailed description please refer to:
https://www.qcad.org/rsforum/viewtopic.php?f=33&p=40081#p40081

In the included screen grab below, left is when drawn cubic, closed periodic, from 4 points.
Right is when the file is re-loaded.

It is hard to select the incorrect shape when pointing near it ... Probably it is referring to the correct internal shape.
After drawing it explodes to a Null length polyline with 2 identical vertices.

I can’t include the error in a file as it reverts on re-load.

The same issue exist for quadratic, closed periodic, from 3 points.

Regards,
CVH

2478QCAD (main)Feature RequestLowMake RMathLineEdit unit awareAssigned
0%
1 Task Description

Andrew,

Related topic: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10094

When entering 1’ 1’‘ in an input field.
- As the size of the rectangle in the topic
- As the length property of a line selected in the drawing
- ....

Returns 13 in a drawing in mm.
And also in a drawing in inch what turns out to be correct.
But also in a drawing in foot.

Similar, entering 1’ with a drawing in kilometers it returns 12 units = 12 kilometers.

Regards,
CVH

2482QCAD (main)Bug ReportLowRShape::getIntersectionPointsCC still failing for touch...Assigned
0%
1 Task Description

Andrew,

Referring to this forum post:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=10152

With radii 1341.35667735 and 26 the relative tolerance is 0.00683678 and exceeds the former used fixed tolerance of 1e-4.

These arcs will then be considered to be tangent and the intersection point is 0.31024 units to the left of where we expect it.

Implemented: https://github.com/qcad/qcad/commit/77ae3e4518cc34f178779d2d2c724adcf80c229d#diff-dcc4e31eaeaed5a047f65dbce4ddda4bcd4d604e9e1005ee8481ded273768449

Updated: https://github.com/qcad/qcad/commit/071b60acd1176e6301bf6b6fcf716684221a97e8#diff-dcc4e31eaeaed5a047f65dbce4ddda4bcd4d604e9e1005ee8481ded273768449

I had already expressed my reserves on the relative tolerance but that was already a better solution for small arcs:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8775&p=34907#p34907

We could limit the tolerance by:
A- The smallest of the fixed and the relative.
B- A relative tolerance based on R2 there circle 1 is forced to be the larger one.

This will never account for the position in the plane.
At a certain point the tolerance will be less than the accuracy/certainty of the values.

Regards,
CVH

2495ECMAScriptBug ReportVery LowRLine.isParallel(RLine) may return true for certain non...Assigned
0%
1 Task Description

Andrew,

It took me a while to find the source of a certain freak bug I encountered.
I used the RLine.isParallel(RLine) as a test for knowing if line segments were parallel or not.

Included below is script code that mimics the functionally of isParallel().

As far as I know isParallel() is nowhere used in the QCAD open source.
Textual only found in RLine.cpp & .h or under: opennurbs, ecmaapi\generated and ecmagenerator\src.

// Example:
// RShape1: RLine(RShape(address: "0xcd70e28"), startPoint: "RVector(969.219858, -171.914894, 0.000000, 1)", endPoint: "RVector(1010.000000, -140.000000, 0.000000, 1)")
// RShape2: RLine(RShape(address: "0x7659770"), startPoint: "RVector(969.219858, -171.914894, 0.000000, 1)", endPoint: "RVector(930.000000, -340.000000, 0.000000, 1)")
----
var aShape1Angle = shape1.getAngle();    // =0.6640461628266838 rad
var aShape2Angle = shape2.getAngle();    // =4.483157047107694 rad
----
// RLine::isParallel(RLine) -> aTest1 || aTest2
var aTest1 = RMath.isSameDirection(aShape1Angle, aShape2Angle);              // =false
var aTest2 = RMath.isSameDirection(aShape1Angle, aShape2Angle + Math.PI);    // =true
var aTestOr = aTest1 || aTest2;                                              // =>TRUE !?
----
// # BUG # RShape1 is considered as parallel with RShape2
----
// RMath::isSameDirection(dir1, dir2, tol) ... tol = RS.AngleTolerance = 1e-9
// for aTest1 -> ax1Test1 || ax1Test2
var ax1Dif = Math.abs(aShape1Angle - aShape2Angle);    // =3.8191108842810104 rad
var ax1Test1 = ax1Dif < 1e-9;                          // =false
var ax1Test2 = ax1Dif > 2*Math.PI - 1e-9;              // =false
var ax1TestOr = ax1Test1 || ax1Test2;                  // =>FALSE
----
// for aTest2 -> ax2Test1 || ax2Test2
var ax2Dif = Math.abs(aShape1Angle - (aShape2Angle + Math.PI));    // =6.9607035378708035 rad
var ax2Test1 = ax2Dif < 1e-9;                                      // =false
var ax2Test2 = ax2Dif > 2*Math.PI - 1e-9;                          // =true
var ax1TestOr = ax1Test1 || ax1Test2;                              // =>TRUE
----
// # BUG # The second test of the second isSameDirection() test returns true because ax2Dif is over 2pi

Regards,
CVH

Showing tasks 351 - 400 of 521 Page 8 of 11<<First - 6 - 7 - 8 - 9 - 10 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing