|
1005 | QCAD (main) | Feature Request | Low | Making use of mouse buttons configurable | Assigned | |
|
Task Description
According to the help, one requires a middle mouse to pan. Since few standard mice have middle buttons, this is a poor choice for this all important function. The default should be the right mouse button when ever the mouse is placed in an open area with nothing else to select. That way right click can still be used to invoke a pop down menu when ever the mouse is placed over an object that might have a need for pop down menu options. Additionally, the Pan mouse key should be alterable and selectable from a Preferences option, since if one does have a three button mouse, we should not prevent a user from employing this hardware if they have it. The same might be said for all mouse buttons to allow the user to configure the mouse operation to that which is most comfortable and efficient for their tasks.
|
|
1008 | QCAD (main) | Bug Report | Low | DXF (dxflib) compat issues | Assigned | |
|
Task Description
Git head as well as 3.4.5 (trial), both with dxflib 3.3.4.0.
Start up QCAD, (with existing or new configuration, doesn’t seem to matter), “Save as” the completely empty drawing, choose “R15 (dxflib)” on Pro (only this one is available on community), save drawing.
Fire up AutoCAD 2000, try to load the empty drawing just saved.
Result:
DXF read error
Error in APPID Table
DXF read error on line 941.
Invalid or incomplete DXF input -- drawing discarded.
Problem not present when a completely empty drawing saved using Teigha in R15 format is opened (ie. it just results in an empty drawing in AutoCAD 2000). Problem is also not present when saving an existing drawing with Pro (trial) with Teigha and opening it in AutoCAD 2000. Problem does present when trying to open a dxflib-saved drawing in AutoCAD 2000.
Empty drawings created with both dxflib 3.3.4.0 in QCAD Pro 3.4.5 trial and Teigha whatever in QCAD Pro trial 3.4.5 are attached. (Community Git 135fd0 is identical to Pro - same dxflib version.)
|
|
1009 | QCAD (main) | Feature Request | Low | Layer Order is Alphabetical vs the Order Defined Origin... | Assigned | |
|
Task Description
It would appear that when QCAD imports a DXF, it reorders the layers into alphabetical order (at least when importing R2011). I have not tested this extensively but on other programs, the order is different from alphabetical. Ideally the operator should be given a choice to order the layers as exported (assuming the DXF format remembers that) or alphabetical. This is because a drawing may have a certain stack up of layers (like a printed circuit board) and then alphabetic ordering is not useful nor desired.
|
|
1023 | QCAD (main) | Feature Request | Low | Arrange points on a plan according to variation of dist... | Assigned | |
2 |
Task Description
Arrange points on a plan according to an arithmetical, geometrical, logarithmic, customizable variation of distances
|
|
1026 | QCAD (main) | Feature Request | Low | Selection Filter also present in the Menu "Selection" | Assigned | |
|
Task Description
It would be nice to have the Selection Filter also present in the Menu / Selection List
|
|
1027 | QCAD (main) | Feature Request | Low | Rectangle with a 3 point determination ... | Assigned | |
1 |
Task Description
Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.
We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.
My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.
1. First point: start
2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle
3. third point: determination second side (height?)
I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...
|
|
1034 | QCAD (main) | Feature Request | Low | Supplementary note added to Application preferences dia... | Assigned | |
|
Task Description
I think it would be useful to add a note to the Application preferences dialog window, to explain to the user the difference between ‘Application and Drawing’ preferences and how it effects drawings in QCAD.
Please see topic for more details and feedback:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2831&p=9724#p9724
|
|
1036 | QCAD (main) | Feature Request | Low | Layer list - drop down menu option | Assigned | |
|
Task Description
In the same way as the Pen tool has a drop down menu, would it be possible to have an option to configure the layer list in the same way. I am trying to create a bit more drawing space and it would be good if I could dock the layer list in the top of my window and only take up a single row space!
|
|
1044 | QCAD (main) | Feature Request | Low | Radian measure symbol for Geometry labeling ... | Assigned | |
2 |
Task Description
We do not have a Radian measure tool but we can change the labeling of a Angular Dimensioning ...
It would be nice to have a “Radian measure symbol” in the Property Editor / Geometry / Label / Insert Symbol List.
|
|
1046 | QCAD (main) | Feature Request | Low | Please add script bindings for Qt 4.8.6 and 5.2.1 | Assigned | |
|
Task Description
These are the versions Ubuntu 14.04 comes with, and since it’s an LTS version, it will linger around a while.
(Despite the fact that the Qt4 packages are versioned 4.8.5, qmake –version says 4.8.6, so it doesn’t find the 4.8.5 bindings.)
Thanks,
|
|
1051 | QCAD (main) | Feature Request | Low | Info tool, polygonal area, possibility for a postfix la... | Assigned | |
1 |
Task Description
... would be nice.
If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².
I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ...
|
|
1067 | QCAD (main) | Feature Request | Low | Filling an area with a bitmap | Assigned | |
1 |
Task Description
Being able to fill an area with a bitmap would be a nice addition to the already impressive feature list of QCAD.
|
|
1080 | QCAD (main) | Feature Request | Low | Bitmap export: calculate size based on bounding box inc... | Assigned | |
|
Task Description
I have created a drawing, where the CENTERS of the most outer lines have a distance of 3.06mm in both X and Y. The line weight of these outer lines is 0.6mm, so the whole image is 3.06mm + 2* 0.6mm/2 = 3.12mm wide and long (center to center plus half of the line weight on every side). Additionally in the export there is a frame around the image, making it 3.12 + 2*frame. The export function however calculates 3.06mm when setting the resolution to 1000Pix/cm, so it does not include the line weights and the outer frame.
|
|
1087 | QCAD (main) | Bug Report | Low | Ruler ticks are not corresponding to the grid points | Assigned | |
1 |
Task Description
Ruler ticks are not corresponding to the grid points, Ruler will completely disappear at a certain zoom level,
Settings: Drawing unit: inch, Grid settings: Grid 1, Meta Grid 12, Dim Label Format: “Engineering, 0’-0.0”
see topic below: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3014
|
|
1090 | QCAD (main) | Feature Request | Low | Export only selected layers to SVG and/or export each l... | Assigned | |
2 |
Task Description
When exporting to SVG it would be helpful if there was a selection of layers to export. E.g. when selecting only layer A in the SVG export dialog, only the objects located/displayed on layer A would be exported to SVG.
As an alternative or additional export feature, there could be an option to export each (non-empty) layer to a separate SVG in one step. The layer names could be used as (part of the) default file names during the export. E.g. Layer A of file XYZ would be exported to “XYZ_A.SVG” while layer B would be exported to “XYZ_B.SVG” etc.
|
|
1092 | QCAD (main) | Feature Request | Low | New tool: draw trace entities | Assigned | |
2 |
Task Description
Add tool to construct new trace entities. Trace entities can currently only be loaded from DXF/DWG.
|
|
1093 | QCAD (main) | Feature Request | Low | Edit Layer attributes by double-clicking on entry in la... | Assigned | |
2 |
Task Description
When double clicking on an entry in the layer list just nothing happens. I would prefer if this would directly open the layer attributes dialog to change color/name etc.
|
|
1098 | QCAD (main) | Feature Request | Low | Support for set of layers | Assigned | |
|
Task Description
Many constructions refer to a basis of elements, which stay constant in all follow-ups. As an example there is a floorplan and I would like to create different variations of room layout (e.g. A and B). In my example the basis consists of 30 layers an each variation needs 10 further ones. At last there are 50 different layers in my drawing. Designing layout A needs layer 1 to 30 (basis) and 31 to 40 (A) to be shown, but 41 to 50 (B) must be invisible. Now I modify Var.B which makes me to single click the visibility of 31 to 40 (A) to be not shown and 41 to 50 (B) to be shown. You’ve got it?
It would be great help, to save the set of all shown layers by an individual name in a pulldown-menu. Visibility of my variations could be chosen by userdefined “set of layers”, e.g. “Var-A”, “Var-B” and “Var-A_but_different”. In this way I pick just one set-name in my pulldown-list instead of marking and demarking between countless layers.
In my opinion this tool would be a small aspect in QCad but a giant leap for user-pleasentness
|
|
1099 | QCAD (main) | Feature Request | Low | Add Leader with text and number bubble | Assigned | |
4 |
Task Description
Having leader with numbers and text would be awesome to better interact with the drawing and making BOM lists.
Currently it takes too mush time to make the leaders with text and number bubbles.
|
|
1100 | QCAD (main) | Feature Request | Low | Add drag dimension (snap) along dimension line | Assigned | |
3 |
Task Description
In Autocad when making a dimension when left clicking to place the dimension there is the possibility to drag the dimension to either side of the dimension. This is also possible with Qcad dimension, but it losses the snapping and does not extend the dimension line out to the dimension text.
This is very useful when the two lines the needs a dimension are close together, or overlapping with another.
Attached is two images one for autocad and one for Qcad
|
|
1102 | QCAD (main) | Feature Request | Low | Ray reference point | Assigned | |
2 |
Task Description
Using a horizontally/vertically ray means always I have to use a preset Reference point which is 0° for the horizontal Ray and 90° for the vertically Ray. The Reference point Option Box is deactivated.
It would be nice to be able to choose by myself between a Start and End Reference point like the vert./horiz. Line options.
|
|
1104 | QCAD (main) | Feature Request | Low | Printing: Add support for page range | Assigned | |
1 |
Task Description
When printing from the preview mode a standard Windows popup shows, letting me select the printer, number of copies and a page range. Unfortunately QCAD (or Windows) ignores the page range - it always prints all pages. So right now I always have to copy the parts I want to print, page them into a separate document and print that instead - even though I got all my stuff nicely lined up for printing on multiple pages.
|
|
1106 | QCAD (main) | Feature Request | Low | Add support for wipeouts | Assigned | |
3 |
Task Description
Wipeout entities can be used to hide rectangular or polygonal sections of a drawing, for example to make space for a label inside a hatch.
|
|
1107 | QCAD (main) | Feature Request | Low | Splines: add / remove control points of existing spline... | Assigned | |
2 |
Task Description
Tools to add control points to existing splines and remove control points.
|
|
1111 | QCAD (main) | Feature Request | Low | Option to swap right/middle mouse button | Assigned | |
|
Task Description
Most of the other slightly non-standard CAD/eCAD tools I work with (e.g. Diptrace, PTC Creo Elements) use the right mouse button to drag. So when changing between these applications, it’s slightly confusing/annoying that I need the middle mouse button to drag in QCad. Even worse, the middle mouse button on most mice is the scroll wheel which is not really comfortable to hold while dragging.
So I’d propose an option to switch the function of the middle and right mouse button to allow users to choose the preferable option.
|
|
1112 | QCAD (main) | Feature Request | Low | Gradients | Assigned | |
5 |
Task Description
I would very much like to ask for the option to Hatch/Fill with a gradient of one or two colours.
Many Thanks
Clive
|
|
1126 | QCAD (main) | Feature Request | Low | Suggestion for Dimension Location setting | Assigned | |
3 |
Task Description
Please seet topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3124
|
|
1127 | QCAD (main) | Feature Request | Low | Leaders: spline shaped | Likely to be implemented | |
2 |
Task Description
Add support for spline shaped leaders
|
|
1130 | QCAD (main) | Feature Request | Low | Offset Polyline from both sides at once | Assigned | |
|
Task Description
It would be great to have a tick box to be able to offset a polyline from both sides/edges at once.
Maybe a similar feature could be added to the line -parallel tools?
|
|
1131 | QCAD (main) | Feature Request | Low | Use different units for construction and dimensions | Assigned | |
2 |
Task Description
E.g. use Millimeters for construction while dimensions are displayed in Meters.
|
|
1133 | QCAD (main) | Feature Request | Low | View > Add View: save layer state | Assigned | |
1 |
Task Description
Save layer state (visibility) with each added view object (optional?).
|
|
1152 | QCAD (main) | Feature Request | Low | Add preference for snap label and snap cursor shape / c... | Assigned | |
1 |
Task Description
Would it be possible to have options for:
1.Enable or disable Snap label with text.
2.To have a ‘Snap Marker’ with style and colour choice instead of snap label.
* It would be good for users to have the choice.
|
|
1155 | QCAD (main) | Feature Request | Low | Add preference for solid line crosshairs | Assigned | |
|
Task Description
Would it be possible to have the choice of either dashed or solid lines for the large cross hairs?
|
|
1156 | QCAD (main) | Feature Request | Low | Add preference to force toolbars to be floating | Assigned | |
1 |
Task Description
Would it be possible to have the choice to dock or not dock toolbars - in other words keep them floating, an additional option in the tool settings could be added?
|
|
1157 | QCAD (main) | Feature Request | Low | Dimension settings - arrowhead style | Assigned | |
3 |
Task Description
A ‘non -filled’ arrowhead would be good to have also.
|
|
1159 | QCAD (main) | Feature Request | Low | Add preference for button option instead of drop down m... | Assigned | |
2 |
Task Description
For some tools like the Horizontal or vertical line, it would be good to have button options (similar to infinite and ray line buttons) instead of the drop down menus.
|
|
1165 | QCAD (main) | Feature Request | Low | New Create Spiral Tool | Assigned | |
4 |
Task Description
A new tool to create Spirals would be great to have, with an option to restrict the decline to achieve to draw either Logarithmic or Linear styles.
Please see related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3236
|
|
1169 | QCAD (main) | Feature Request | Low | Bitmap clipping | Assigned | |
1 |
Task Description
Clipping bitmaps to only show a part of the image.
See: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3263
|
|
1172 | QCAD (main) | Feature Request | Low | Print Preview - Add 'Place Paper Option' tool | Assigned | |
1 |
Task Description
Often in print preview I need to move the paper around and position it with the ‘Move Paper Position’ tool, which is useful, but what would be an additional extra useful option would be a ‘Place Paper Here’ tool.
Then I could simply use this tool first and then use the ‘Move Paper Position’ tool afterwards to fine tune things!
If you look at the attached image you will see that in this students file they have got their drawing spread out all over the place:(
|
|
1185 | QCAD (main) | Feature Request | Low | Importing Tables (CSV) | Assigned | |
2 |
Task Description
Import tables in CSV format and display them in the drawing as lines and text.
|
|
1187 | QCAD (main) | Feature Request | Low | Scale possibility for Info tools ... | Assigned | |
3 |
Task Description
Now - after enjoying the great new “Scale” option for Dimensioning I like to ask for the same scale option for the “Info tools”. It would be really nice to have more flexibility (without a pocket-calculator) in reading and displaying the Info tool results.
|
|
1203 | dxflib | Bug Report | Low | Images not saved (dxflib) | Assigned | |
|
Task Description
I am doing a bit of landscaping and using a (big) ortophoto as one of my layers in order to sanity-check on the ground measurements.
The layer contains a point and the image and nothing else.
The image is a 8MB file: “PNG image data, 4200 x 2980, 8-bit/color RGB, non-interlaced” and it is scaled to 210 coordinate units (meter) horizontally in the drawing.
With approx 50% probability the image disappears during Save, as see for instance in this diff of the DXF file:
@@ -158699,28 +153057,6 @@ AcDbXrecord
90
6
0
-IMAGEDEF
- 5
-A1
-100
-AcDbRasterImageDef
- 90
-0
- 1
-/critter/HTV10/Ortofoto/ortofoto201502f.png
- 10
-210.0
- 20
-149.0
- 11
-1.0
- 21
-1.0
-280
-1
-281
-0
- 0
ENDSEC
0
EOF
The point in the same layer does not similarly disappear, the bug only seems to affect images.
I have seen this bug from version 3.7.5.0 to git as of yesterday (63e06c778926a803bdfbffdf27b8c24d41511072).
I have not been able to correlate the bug with anything.
Looking closer at the DXF file (attached), there seems to be some residuce of attempts to insert images in protected/invisible layers, so this may be some kind of refcounting issue.
(Any chance of getting FreeBSD into the “Operating System” field ?)
|
|
1206 | QCAD (main) | Feature Request | Low | Link drawings with each other to update layers, blocks | Assigned | |
3 |
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3410
|
|
1214 | QCAD (main) | Bug Report | Low | Array of blocks -> Clipboard -> "flip pasted entities" ... | Assigned | |
1 |
Task Description
Case:
Select a block array, put it with “Copy with reference” or “Cut with reference” into the clipboard, choose a reference point which isn’t in the center of the array, use the paste tool / with option “flip pasted entities”
If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point. If I try to flip in both directions at the same time - you can’t see this effect.
|
|
1224 | QCAD (main) | Feature Request | Low | Revision clouds | Likely to be implemented | |
9 |
Task Description
Add support to draw revision clouds or convert polylines, ellipses, circles to revision clouds.
|
|
1229 | QCAD (main) | Feature Request | Low | Load last project at start | Assigned | |
|
Task Description
When starting QCAD it will open a new, untitled, page causing me to close that, click through the saving option to discard changes and then load up the project i’m working on. It would be nice to have the option for the program to start with the last used project. I checked the application preferences to see if this option was already possible as it’s common with other applications but couldn’t find it. In ‘Startup’ (the obvious place for it) there was only an option for the splash screen.
|
|
1230 | QCAD (main) | Feature Request | Low | File > PDF Export / SVG Export: export layers | Assigned | |
|
Task Description
Dear Andrew, just in case you should ever run out of ideas for enhancements; As an advisor I sometimes get PDF files and recently, some CAD drawings contained layers, which is kind of nifty to reduce the clutter.
Sadly though, qprinter/qpainter seem to be unaware of OCG (Optional Content Groups, the PDF jargon for layers) at the moment, so my plea is for the back burner now. Probably in SVG though it can be done? Yet that is of a little less use, maybe…
|
|
1233 | QCAD (main) | Feature Request | Low | Tab key to cycle between selected objects | Assigned | |
|
Task Description
I think it’s a useful adition and makes it easy to select objects that are overlapped. I know there is a selection filter, but sometimes this is faster and/or all the objects share the same type and such things.
If I remember correctly, Inkscape has this behaviour.
Thanks.
|
|
1242 | QCAD (main) | Bug Report | Low | SVG import DPI box should use localized decimal separat... | Assigned | |
1 |
Task Description
I wanted to make it so, that SVG units translate 1:1 into CAD units; I use the German localized QCAD and entered 25,4 into the box with the wrong result, i.e. the same as 25; Entering 25.4 got me what I wanted: The question box needs the point and ignores the comma. Would be nice if it could use the localized separator.
|
|
1254 | QCAD (main) | Feature Request | Low | Add drop object along a path with automatic trim | Assigned | |
|
Task Description
Add drop object along a path with automatic trim.
The object can be a selection before or after selecting the tool, an entity or a block.
The path can be another entity from a start point to an end point.
Dropping can be made on one side or the other (like in other tools depending on the side of the cursor), with a choice of miroring the object or not.
The number of drops or the distance between can be selected.
The distance can be between a control point of the object or its sysmetry axis or border.
The dropping direction can be selected too.
The droping depth can be constrained : all control points have passed the path, or one of them. Alternatively, replace control points by an entity belonging to the object.
Exemple of use case : equidistant drills in a curved rail. The dropping depth constraint enables for example to ensure a drill has a minimal depth when not orthogonal to a plan.
|