QCAD Bugtracker

I have set the grid/snap value to X=.0625 Y=.0625 on all 4 viewports.
When zooming in and out the grid/snap scale changes from .0625 to 3.90625. at this point the grid/snap points differ,
This causes a variation in the grid/snap reference points lending to drawing errors.

example
When I use the grid settings defaults .01, when zooming in and out, the grid/snap scaling doesn’t seem to have this issue.
Other values do, See below.

set value first zoom second zoom next zoom

	point		point		point ...	

0.01 0.1 1.0 10.0 ...
0.02 0.04 0.4 4.0 ...
0.04 0.16 1.6 16.0 ...
0.05 0.25 2.5 25.0 ...
0.0625 0.390625 3.90625 39.0625 ...
0.0254 0.64516 6.4516 64.516 ...

Why is there a squaring of the original set value? Which then becomes a new zoomed grid/snap value?

QCAD Professional
Version: 3.26.4.0 (3.26.4)
Internet: QCAD.org
Build Date: Jun 3 2021
Revision: 0bb4334
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

It would be nice to be able to adjust the zoom factor so that the scale on the screen matches a ruler which I lay on the screen.

Thanks!

Add parameters to the function DL_Dxf::writeVPort.
This way users will be able to specify the desired viewport.

Is the github the official repository? Are pull requests sent there accepted?

QGroupBox widgets with <property name=”checkable”> are not saved in Qcad3.conf

When selecting multiple blocks that contain the same attribute names, attribute properties appear with the values of the last selected block instead of “various”. I do not know if this is a “bug” or developer option, but “various” would be better in my opinion.

1. The Scrollbars for each window in the Viewports has the same size like the normal used scrollbars for windows. If you are working on a normal size Monitor it “steals” a lot of “working space”. Is there any possibility to make the scrollbars smaller or just a line to separate the windows so that I have to navigate with Keyboard and mouse?

2. I thing the Viewports and the View List belongs together - is it possible to get a button in the “View List / Tool Bar” to choose a Viewport style instead of “walking” the long way over the “Drawing preferences” Menu?

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=47&t=2071

When working with multiple Viewports with different scale it could be very useful to have extra properties controlling how dimensions are rendered in the viewport:

1)
E.g an extra “Dimension Scale” under “Scale” in the Viewport selection’s ‘Specific Properties’ section, could allow having the same size when printed.
This Dimension Scale would be multiplied on top of the Scale value, but only for Dimensions rendering.

2)
Toggle button for hiding any dimensions in the Viewport. Maybe this should be controlled by being able to specify a Layer that should be hidden in this Viewport only, then I could select my Dimensions layer here.

The Viewport properties:
https://i.imgur.com/s07JtaB.png

It would be helpful if the scale field that appears while placing a viewport would also re-appear when the viewport is selected after it’s already been placed in the layout. It would also be helpful if the pre-populated values in the dropdown matched those in the global layout scale field.

To reproduce

Actual

Expected

Motivation

Workaround

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729

Status Bar menu remains unchecked even it is toggled on or off

See also:
https://qcad.org/rsforum/viewtopic.php?f=32&t=4840

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6367#p23947

Save layer state (visibility) with each added view object (optional?).

With default autosnap settings reference points included I find it very hard to snap to the baseline reference points of a dimension.
I manage to do it by setting snap to reference point only and zoom out till I see the entire dimension element.

Ob dies ein Feature Request oder ein Bugreport ist weiß ich nicht ....

Hier meine Gedanken ....

In den Application Preferences kann ich mehrere Library Sources vorgeben. Ich habe eine auf dem HD und eine auf einen USB angegeben.

Wenn ich nun QCad auf der HD ausführe habe ich beide Ressourcen zur Verfügung. Schön! Natürlich habe ich auch im Library Browser meine Favoriten von beiden Ressourcen angegeben.

Wenn ich nun aber den USB entferne zeigt mir der Library Browser immer noch beide Resorcen als Name an - schalte ich nun um auf die USB Resource bekomme ich keinerlei Hinweis das diese momentan nicht zur Verfügung steht. Es passiert einfach NIX Es wäre schön wenn ich hier eine “Nicht verfügbar” Meldung bekommen würde.

Wenn ich nun meine Trotteligkeit bemerke und den USB wieder einstecke habe ich logischerweise wieder meine Library zur Verfügung ..... nur die auf den USB Stick verweisenden Favoriten sind auf Nimmerwiedersehen verschwunden. Die auf dem HD bleiben erhalten!

OK - um es ganz rund zu machen ein anderes Szenarios in “Steno”:
QCad Start vom USB - > Library Favoriten anlegen auf USB Library - > QCad schließen - > USB entfernen → QCad auf HD starten - > Library Favoriten auf USB sind verschwunden - > QCad HD schließen - > USB einstecken und QCad von USB starten = Favoriten auf USB bleiben verloren!

Wäre es hier nicht möglich die Favoriten Information dem USB mit auf dem Weg zu geben? Wenn ich eine Favoriten Auswahl auf dem USB nicht kontrollieren kann macht diese Möglichkeit kaum Sinn.

The option for vertically and diagonally stacked fractions would be helpful for both the text creation tool and as the output of dimensions.

When using the vertical line tool, you can enter a length value in the options toolbar, then place the line. If you want to change the length, you just need to enter a new value and the length field will update. However, there seem to be cases where after 10-20 entries, the focus goes off the length field in the options toolbar, requiring the user to bring focus back to continue. I could not seem to duplicate this behavior with the horizontal line tool.

Vertical dimensions created with 3rd party applications are sometimes imported as horizontal dimensions with length 0. Changing the angle in the property editor fixes the problem.
Problem occurs in QCAD 2.2 and QCAD 3.0.

It would be a nice feature to be able to define your own toolbar.

See: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2393

To have the option to set your own ‘user defined’ line weight.

UCS support.

Hi,
this is a usability feature request:

If you want to move an object relatively to any point (e.g. by entering @x;y in commandline) it does’nt make sense to enter a starting reference point. Of course this is possible by clicking to any location on the screen. But it’s difficult to change between mouse and keyboard so often.

It should be possible to enter a “don’t care” or “any” reference point by pressing a keyboard shortcut (e.g. enter like in AutoCAD).

Thx

If there is no selection the Properties Editor could be used to predefine the properties of to be drawn elements.

E.g. use Millimeters for construction while dimensions are displayed in Meters.

Unrelated to OS, nor version

Reported Jun 23, 2020 in: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372

Status Dec 24, 2020: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372#p30955 Documentation is updated.
The Classes still refer to an ‘angleTolerance’.

Regards,
CVH

Building with the bundled version, 1.8.5, works fine.

When I try to build using the system version, which for Mageia Cauldron is 1.9.3, the build fails.

https://raw.githubusercontent.com/kekePower/mmbl/master/qcad/2019/12/11/20%3A13%3A48/log.qcad

Here is the current spec file for version 3.23.0.4.
https://svnweb.mageia.org/packages/cauldron/qcad/current/SPECS/qcad.spec?revision=1465894&view=markup

It looks like qcad is incompatible with versions above 1.8.5.

Are there plans to port to the new version?

Thanks in advance.

Include RPolyline.getLeftRightOutline() method in class_r_polyline.html

In use since 11 Sept 2020

CVH

I am getting random crashing on my MacBook M1 chipset while using QCAD Pro. There is nothing in particular that you can do to replicate as the crashing is completely inconsistent. Have had it crash when pressing escape while using measurement tool, but have also had it crash while using the app and selecting a tool.

Included crash report, which has also been sent to Apple.

Thanks

Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.

Feature request - to have an option to underline text.

My system: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz and 8 GB of RAM and NVIDIA GT218 (GeForce 210)

For a normal drawing displaying it in all detail is a good thing and the performance of my quad-core system is more than adequate.

But I discovered (or rather experienced) that when putting a large collection of individual drawings of gears onto one big sheet (960 mm x 600 mm - preparation for laser cutting), the performance was so bad that I had to wait several seconds (>10 sec) for each step in the process of arranging all the parts on the layer.

Request: It would be a big help and performance booster if you could disable the detailed view of each part/layer and only draw a rectangle to visualize the outline of the part.

Please take this in consideration. Attached you find an example of how that could look like. (Actually when pasting a drawing from the clipboard you already do that.)

Would it be possible to add a feature which turns selected text into solid fill hatched polylines?

That would make it possible to migrate the drawing from one computer system to another without having to worry whether the used font is installed on both systems, like when sending a drawing to a manufacturer for laser engraving.

Right now I can do it by hand, letter by letter, and that is a rather labour-intensive task.

This is a trim method I am missing in Qcad.

20 years ago it existed in CadKey.
You had a bunch of lines or segments.
You defined a (new) line or segment as cutter.
‘Trim All’.
You pointed at the side of the cutter entity to trim all intersecting at that side.

Pritty the same as in this topic:
https://qcad.org/rsforum/viewtopic.php?t=5221

Only in rare cases I can use Husky’s workaround as pro.
It all depends on what else is in the clipping rectangle that is needed to trim all intended.
If of no use all single crossing entities have to be chosen one by one.

Regards,
CVH

If you spot an error in the translated user interface of QCAD, please add a comment to this task or submit your translation at http://translate.qcad.org.
Thank you for your help!

Wenn Sie einen Fehler in der übersetzten Benutzeroberfläche von QCAD erkennen, fügen Sie bitte einen Kommentar zu diesem Report hinzu oder geben Sie Ihre Übersetzung ein unter http://translate.qcad.org.
Vielen Dank für Ihre Hilfe!

Si vous remarquez une erreur dans l’interface utilisateur traduite de QCAD, veuillez ajouter un commentaire à cette tâche ou soumettre votre traduction à http://translate.qcad.org.
Merci pour votre aide!

Si detecta un error en la interfaz de usuario traducida de QCAD, añada un comentario a esta tarea o envíe su traducción a http://translate.qcad.org.
Gracias por tu ayuda!

Se si rileva un errore nell’interfaccia utente tradotta di QCAD, si prega di aggiungere un commento a questo compito o di inviare la traduzione a http://translate.qcad.org.
Obrigado por sua ajuda!

Se você detectar um erro na interface de usuário traduzida do QCAD, adicione um comentário a esta tarefa ou envie sua tradução para http://translate.qcad.org.
Obrigado pela sua ajuda!

Als u een fout ziet in de vertaalde gebruikersinterface van QCAD, voeg dan een opmerking toe aan deze taak of stuur uw vertaling naar http://translate.qcad.org.
Bedankt voor uw hulp!

The inside corners of profile tool paths have rounded inside corners. This occurs because the rounded outside the bit cannot make it all the way into the corner of the feature. Think of tracing the inside wall of a cardboard box with a can of soup. The can makes direct contact with the box walls, but its
round shape is unable to completely fit into the tight corners— there’s always a gap.

In a dog-bone overcut (see the figure in attachment), the inside profile corner is enlarged into a semicircle, allowing the sharp edges of the mating piece to slide through without interference.

When a dog bone is applied to the inside corners, as shown in the second figure in the attachment, the joints fit together nicely!

The following website explains what should be implemented More elegant CNC dogbones

There are two ways to implement this tool. Either you modify the original design (as implemented in Fusion 360) or you can do it at the moment you define the tool path (Estlcam allows you to do this for example). See the feature Corner overcut, on Estlcam website

Hi Andrew

A request for adding some fields to the toolpath

Please refer to: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9033

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4923

Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.

Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.

Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.

Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel

Because modifying hatches have lag issues I’d like to propose a toggle that turns of the redrawing/rendering of the hatch. Especially while modifying the hatch.

The hatches always have a boundary that can be worked with right? So when we move or stretch the hatch we can still see the boundary and its handles to perform all the actions.

This could be a new view mode that turns of the view of the interior/pattern of the hatch but leave the boundary of the hatch.
Or the draft mode can be extended to include simplified hatches while modifying.

Also see the discussion

To re-introduce Tile and Cascade window options like as before in QCAD 2.2.2.

It might be useful for some to have the option to turn on/off ' auto’ dimension tracking option.

See related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=2&p=6893#p6893

To add the option to ‘print only’ selected area in a drawing.

Hi Andrew

In QcadCAM when using the new Themes or User Created Themes the Layer and Block Tabs Appear to be reversed in East and West Positions.
I have discussed this with forum user PeteVick and he cannot reproduce this behavior in Qcad Pro... he suggested submitting this bug report.
I didn’t notice this until he pointed it out and don’t expect it to be high on your list of things to do..

Best Regards
John Hyslop
PS We are both using Linux Mint 20.1 (64bit) which is based on Ubuntu

Text dialog (QTextEdit) strips tabs in toHtml.
If tabs can be retained, text entities could support tabs.

Add support for automatic text line wrapping for multiline text entities.

Case:
Drawing with text, zoom in and out with one of the common methods, text will disappear in certain zoom level

Same drawing zoomed in and out in 3.20.0.0 doesn’t show this effect - works just fine.

How to reproduce the bug:
1-open a new file
2-select text tool, simple text(one line,no formatting) and alignment in base-left
3-write some text in somewhere position in the draw, repeat this in others positions
4-save the file in .dxf R15 [2000/LT2000] (dxflib) format
5-close Qcad
6-open the saved file, the writhed text lose original position and now all the text have 0,0 position

When I zoom, the text disappears in certain zoom levels after updating to the latest version.