QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  desc
1229QCAD (main)Feature RequestLowLoad last project at startAssigned
0%
Task Description

When starting QCAD it will open a new, untitled, page causing me to close that, click through the saving option to discard changes and then load up the project i’m working on. It would be nice to have the option for the program to start with the last used project.
I checked the application preferences to see if this option was already possible as it’s common with other applications but couldn’t find it. In ‘Startup’ (the obvious place for it) there was only an option for the splash screen.

1426QCAD (main)Feature RequestVery LowLoad drawings that were open when closing QCAD on start...Assigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4249

764QCAD (main)Feature RequestLowLinks to Data sheet, Part List ...Assigned
0%
Task Description

Most of our drawings have a Data sheet, parts List, cutting list, description etc etc on a pdf, world or excel file.

It would be nice to have a link possibility directly in QCAD to those files what will be saved with the drawing.
Like the bitmap function without displaying the files in the drawing ...

1837QCAD (main)Feature RequestLowLine bisector toolAssigned
0%
Task Description

Hi,

we have already this nice tool “Angle bisector”.

I would really appreciate if we could get the same function for parallel lines to place a line exactly in the center of both lines.

Thanks.

584QCAD (main)Bug ReportLowLibrary Items können unbrauchbar gemacht werden durch l...Assigned
0%
Task Description

Nach einigen Überraschungen ....

Es ist möglich Layer in nicht eingefügten oder unsichtbar geschalteten Library Items unbemerkt zu löschen ....

Fallbeispiel 1:
Ich arbeite an einer Zeichnung die u.a. den Layer “Gelbe Linie” benutzt.
Ich füge ein Library Item ein was auch einen Layer “Gelbe Linie” hat.
Ich lösche - aus welchen Gründen auch immer - in der Zeichnung das Library Item weil ich es erst später wieder verwenden will.
In der Blocklist ist es natürlich immer noch verfügbar.
In der Zeichnung lösche ich den Layer “Gelbe Linie” da ich diesen nicht brauche brauche - habe aber natürlich nicht im Kopf welche Layer in meinen Blocks verwendet wurden.
Nach einiger Zeit will ich den Block (den aus der Library) wieder einfügen - dieser ist nun aber unbrauchbar da der Inhalt welcher auf dem Layer “gelbe Linie” war fehlt.
Das Library Item neu aus Library laden um das bereits existierende zu reparieren scheitert da das erste nicht überschrieben werden kann. Ich muss den ersten Block löschen um den neuen benutzen zu können.

Fallbeispiel 2:
Da das selbe (löschen der Layer) auch passieren kann bei unsichtbar geschalteten Blöcken kann es dazu führen das ich zig bereits positionierte Blöcke zerstöre und neu platzieren muss um meine Zeichnung zu reparieren.

Fallbeispiel 3:
Ich sehe in meiner Zeichnung einen Layer “Gelbe Linie”. Weiß nicht was das ist - schalte alle Layer unsichtbar außer “Gelbe Linie”. Klicke auf “Auto Zoom” um zu sehen was den auf “Gelbe Linie” ist. Finde nichts = also leer! Lösche Layer “Gelbe Linie”. Der Layer wurde aber von einem im Moment nicht verwendeten Library Block verwendet. Es gibt keinen Hinweis das ich damit ein Library Item zerstören könnte ....

Lange Rede kurzer Sinn: Wäre es machbar/sinnvoll Layer in Blöcken nur löschen zu können wenn ich mich im Edit Modus der Blöcke befinde?

1263QCAD (main)Feature RequestLowLibrary Browser: Configurable background color for icon...Assigned
0%
Task Description

See:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3709

1339QCAD (main)Bug ReportLowLibrary Browser unstoppableAssigned
0%
Task Description

Hi,

Even with the Application Preference, Library Browser, NO Update on Start up,
the Libray Browser scans the directory, a proces that can’t be stopped or closed.

719QCAD (main)Feature RequestLowLibrary Browser additional Function ...Assigned
0%
Task Description

It would be nice to get:

In the Create Library Item task → “Save as” a remember Function for the last chosen Path to save the Item ... or a default path what is the same like the settings in the Application Preferences.
Right now you have to navigate again and again for every item what you will save in the same directory. If you have to save 20 items - it sacks ;-)

Also would it be nice for an easy “Clean up” to have the possibility to delete items directly in the Library Browser window.
Right now you have to use extern Programs like the Windows explorer to move or delete items.

893QCAD (main)Bug ReportLowLibrary Browser - Edit Library Item - opens drawings al...Assigned
0%
Task Description

Library Browser - Edit Library Item - opens drawings always with grid.

- If I switch between opened drawings back and forth the grid will disappear ....
- If I switch the grid button between visible (it is already visible!) and invisible the grid is gone ....

Just Cosmetic ... ;-)

1009QCAD (main)Feature RequestLowLayer Order is Alphabetical vs the Order Defined Origin...Assigned
0%
Task Description

It would appear that when QCAD imports a DXF, it reorders the layers into alphabetical order (at least when importing R2011). I have not tested this extensively but on other programs, the order is different from alphabetical. Ideally the operator should be given a choice to order the layers as exported (assuming the DXF format remembers that) or alphabetical. This is because a drawing may have a certain stack up of layers (like a printed circuit board) and then alphabetic ordering is not useful nor desired.

1278QCAD (main)Feature RequestLowLayer list: store layer state independently of parent l...Assigned
0%
Task Description

See:
http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3755

1701QCAD (main)Feature RequestLowLayer List / Block List: add filter inputAssigned
0%
Task Description

Add text filter for layer list, block list.

1036QCAD (main)Feature RequestLowLayer list - drop down menu optionAssigned
0%
Task Description

In the same way as the Pen tool has a drop down menu, would it be possible to have an option to configure the layer list in the same way. I am trying to create a bit more drawing space and it would be good if I could dock the layer list in the top of my window and only take up a single row space!

1851QCAD (main)SuggestionLowLateral surface of a coneAssigned
0%
Task Description

Module mise à plat d’un cone

Bonjour,

Serait il possible dans un futur d’ajouter un module de mise en plan de cone.

Une petite fenêtre sur lequel on donne par exemple :
1- Ø haut
2- angle de coupe du haut
3- hauteur du cône
4- Ø bas
5- angle du bas
6- épaisseur matière

Ce qui permettrai de sortir une mise en plan a plat de la forme

1691QCAD (main)Bug ReportVery LowIssue with Layouts after "File-Revert"Assigned
0%
Task Description

QCad 3.19.2 Professional, 64bit, Liux Mint

Case:
1. Open some saved drawing with viewport entities on layout block (paper space). Print Preview mode is “On” automatically.
2. After “File-Revert” drawing is reopened on layout block (paper space), but now Print Previw mode is “Off” .

For example can try on “flange.dxf”

498QCAD (main)Bug ReportLowissue importing from AutocadAssigned
0%
Task Description

There is an issue importing from Autocad:
lines and quotes (both arrows and text) appear too much big (see attachment).
I can fix quotes modifying dimensions in “current drawing preferences”, but lines are still too thick.
Autocad’s dxf are opened with right line thickness but wrong quotes.
Furthermore, Autocad opens Qcad’s dxf files showing wrong quotes.

714QCAD (main)Bug ReportLowIsometric view tool bar doesn`t remain ' docked'.Assigned
0%
Task Description

Win 7 - 64
Isometric view tool bar doesn`t remain ' docked’ when re-opening QCAD.

980QCAD (main)Bug ReportLowIsometric Projection / blocks / wrong layer are used in...Assigned
0%
Task Description

Isometric Projection used on a selection which contains blocks will mix up the layer affiliations.
No blocks - no problems ;-)

772QCAD (main)Bug ReportLowIsometric grid: toggle buttons not updatedAssigned
0%
Task Description

- Switch isometric grid off
- Switch isometric grid on using drawing preferences
- Tool buttons don’t reflect correct status

883QCAD (main)Feature RequestLowInformation tool for finding the centroid of an irregul...Assigned
0%
Task Description

It would be extreamly useful to have an additional info tool to be able to find the centre of gravity (centroid) for an irregualr polygon.
For info please see:http://en.wikipedia.org/wiki/Centroid

Actually a tool whicn gives an option for finding the centre and centroid of polygons would be good.

1427QCAD (main)Bug ReportLowInfo Tool / Polylinie Area (II)/ Preview brokenAssigned
0%
Task Description

Print “Command Line” and as “Add measurement to drawing” works as expected.

703QCAD (main)Feature RequestLowInfo function -> contour for Hatch not closed ...Assigned
0%
Task Description

Task: If I like to make a hatch and the contour isn’t closed I get a Grey circle Info where the contour isn’t closed. Nice!

But ..... I have this Info only for ONE not proper connection and only for the moment when the mouse pointer is over the Hatch Tool Symbol.

If I have to zoom into the Problem - I will lose the Info where the problem is :-(

To get the “Problem Info” back I have to select it again - but for that I have to zoom out ............... ;-)

It would be nice to have this “Problem Info” longer in the drawing - maybe until I solved all problems.

And it would be nice to have ALL Infos for not connected lines at the same time. It is not really helpful to repeat this function 20times if I have 20 connection problems ... ;)

645QCAD (main)Bug ReportLowInch - Layerdata / Linewight still in mm ...Assigned
0%
Task Description

Drawing Unit is in “Inch” but the Layer Data (Line wight) is in “mm” ....

I like it ;-) ... but maybe I’m the only one :-(

628QCAD (main)Feature RequestLowImprove workflow for entering tool parametersAssigned
0%
Task Description

Provide keyboard shortcuts for options tool bar.

Under Linux, Windows Alt+Key shortcuts can be used.
Mac OS X does not seem to support this.

See also suggestions at:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2053&view=unread#unread

1323QCAD (main)SuggestionLowImprove command line support in QCADAssigned
0%
Task Description

Hi,

As a typical command line draftsman (still using acad10 for dos, since microsoft doesn’t supoort Win NT anymore),
I noticed a severe lack on command line acces in QCAD.

For example I find the icon and pixel selecting methods within qcad very confusing and rude.

With the normal cad Select command I can select exactly what en how I want it.

I intend not to be rude, but I find my drawing screen littered all over with all kind of very specialist menu’s,
tools and options. Sorry, I just want to make a drawing at the natural intuitive way, as with a pencil.
So I use command line Commands, such as Move, Copy, Change, Select, a.s.o.
For a ‘Command scripting’ user (-batching is a different tool!-),
it seems to me logical these basic commands should be accessable.

1203dxflibBug ReportLowImages not saved (dxflib)Assigned
0%
Task Description

I am doing a bit of landscaping and using a (big) ortophoto as one of my layers in order to sanity-check on the ground measurements.

The layer contains a point and the image and nothing else.

The image is a 8MB file: “PNG image data, 4200 x 2980, 8-bit/color RGB, non-interlaced” and it is scaled to 210 coordinate units (meter) horizontally in the drawing.

With approx 50% probability the image disappears during Save, as see for instance in this diff of the DXF file:

      @@ -158699,28 +153057,6 @@ AcDbXrecord
        90
       6
         0
      -IMAGEDEF
      -  5
      -A1
      -100
      -AcDbRasterImageDef
      - 90
      -0
      -  1
      -/critter/HTV10/Ortofoto/ortofoto201502f.png
      - 10
      -210.0
      - 20
      -149.0
      - 11
      -1.0
      - 21
      -1.0
      -280
      -1
      -281
      -0
      -  0
       ENDSEC
         0
       EOF

The point in the same layer does not similarly disappear, the bug only seems to affect images.

I have seen this bug from version 3.7.5.0 to git as of yesterday (63e06c778926a803bdfbffdf27b8c24d41511072).

I have not been able to correlate the bug with anything.

Looking closer at the DXF file (attached), there seems to be some residuce of attempts to insert images in protected/invisible layers, so this may be some kind of refcounting issue.

(Any chance of getting FreeBSD into the “Operating System” field ?)

1844QCAD/CAMFeature RequestLowHP/GL (PLT) importAssigned
0%
Task Description

Hi Andrew

QCAD/CAM misses a hpgl.plt import. If gerber and G-code can, so should plt.

787QCAD (main)Feature RequestLowHatch generator - plug in tool?Assigned
0%
Task Description

Would it be possible to make a Plug in tool for a Hatch generator, so custom made hatches can be saved as .pat files?

I have a lot of up and coming future projects that I would like to make my own ‘custom’ hatches for.

1826QCAD (main)Feature RequestLowguide lines when extending lines Assigned
0%
Task Description

When using the SHIFT key while dragging the end point a perpendicular guide line is displayed (see attached screenshot).
It would be very helpful if other guide lines with x=const. and y= const. are displayed when pressing SHIFT + ALT key together while dragging.

689QCAD (main)Bug ReportLowGrid spacing info not shownAssigned
0%
Task Description

OpenSuSE 12.2: the grid info display is not displayed:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2178&view=unread#unread

1772QCAD (main)Feature RequestLowGo back on right-click on shaded Tool buttonAssigned
0%
Task Description

Right-click on the tools on the left-hand side of the screen brings you back in the hierarchy.

However, that does not work if you right-click while hovering above a button that that is shaded (inactive).

601QCAD (main)Feature RequestLowFür Berechnungen neu zu erstellende Elemente Werte von ...Assigned
0%
Task Description

Es wäre schön wenn ich Werte wie zum Beispiel Längen von Linien direkt abgreifen könnte um diese weiter in Berechnungen verwenden zu können.

Beispiel:
Ich habe eine Linie konstruiert wobei sich eine Länge y ergeben hat.

Nun möchte ich eine Linie zeichnen die 5 mal y sein soll.

Linientool → Wert 5* eingeben und y durch Auswahl mit der Maus von dem vorhandenen Elements übernehmen.

Natürlich könnte ich die Geometrie Info benutzen um den Wert abzulesen oder auch über die Zwischenablage zu benutzen. Ein abgreifen mit der Maus wäre aber schneller, direkter und wahrscheinlich auch mit weniger Fehlern (Human error) verbunden. Wahrscheinlich auch genauer da QCad, denke ich, mit mehr Nachkommastellen rechnet, oder?

1067QCAD (main)Feature RequestLowFilling an area with a bitmapAssigned
0%
Task Description

Being able to fill an area with a bitmap would be a nice addition to the already impressive feature list of QCAD.

586QCAD (main)Feature RequestLowFile open dialog with previewAssigned
0%
Task Description

Since this is not supported by Qt anymore, this would likely have to be implemented from scratch.

1332QCAD (main)Feature RequestLowFile > SVG Export: export DXF entity handles to SVGAssigned
0%
Task Description

Add handle attribute to exported SVG tags to identify exported DXF entities.

1230QCAD (main)Feature RequestLowFile > PDF Export / SVG Export: export layersAssigned
0%
Task Description

Dear Andrew, just in case you should ever run out of ideas for enhancements; As an advisor I sometimes get PDF files and recently, some CAD drawings contained layers, which is kind of nifty to reduce the clutter.

Sadly though, qprinter/qpainter seem to be unaware of OCG (Optional Content Groups, the PDF jargon for layers) at the moment, so my plea is for the back burner now. Probably in SVG though it can be done? Yet that is of a little less use, maybe…

1923QCAD (main)Bug ReportVery LowFaulty rendering Polylines with Global/Local Widths and...Assigned
0%
Task Description

Win7pro 32bit Qcad 3.23.0

Andrew,
The Arc segments of Polylines with Global or any Local Width render faulty where Global Z or any of the arc’s local Z is not zero.

In the attached drawing setting the Global Z of the inner poly to 5,10,...

The setting of Z to not zero affects the radius of the projected arc and not the bulging of the poly.
It also affects the projected widths of the line inversely, but not by changing the widths properties.

Pritty rare combination! True.
Qcad is 2D native! True.

Flatten will resolve this.

It is not a purely visual rendering fault, the poly will explode as such.

Maybe similar flaw as with uneven scaling blocks with arcs.
https://qcad.org/rsforum/viewtopic.php?f=8&t=5566#p20703

Regards

951QCAD (main)Feature RequestLowExtra Option for Block attributes ...Assigned
0%
Task Description

It would be nice to have the possibility to control the automatic Text orientation in Block attributes.
Something what would work like the DIM restriction: I can read the text horizontal and/or from the right side of the drawing sheet.

Right now I have the feeling that the Text orientation is dependent on the tool what I even use.
Different tools = different outcomes.

1090QCAD (main)Feature RequestLowExport only selected layers to SVG and/or export each l...Assigned
0%
Task Description

When exporting to SVG it would be helpful if there was a selection of layers to export.
E.g. when selecting only layer A in the SVG export dialog, only the objects located/displayed on layer A would be exported to SVG.

As an alternative or additional export feature, there could be an option to export each (non-empty) layer to a separate SVG in one step.
The layer names could be used as (part of the) default file names during the export.
E.g. Layer A of file XYZ would be exported to “XYZ_A.SVG” while layer B would be exported to “XYZ_B.SVG” etc.

173QCAD (main)Feature RequestLowexplode text to lettersAssigned
0%
Task Description

implement

1858QCAD (main)Feature RequestLowEnter measurements from drawing into line inputsAssigned
0%
Task Description

Add option to line input context menu to enter a distance from the drawing, measured from two points.
Perhaps existing measuring tools can be re-used to feedback values into line edits to avoid duplication.

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=6111

1316QCAD (main)Feature RequestLowEdit > Drawing Preferences: add global linear factorAssigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3846

1586QCAD (main)Feature RequestLowEdit > Application Preferences: Use different color for...Assigned
0%
Task Description

Add preference to use a single, configurable color for all locked layers.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4879#p17953

1920QCAD (main)Feature RequestVery LowEdit > Application Preferences: Add preference to disab...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447

747QCAD (main)Feature RequestLowDXF import: dimension labelAssigned
0%
Task Description

Add support for custom dimension labels created in 3rd party applications. Such labels may contain text that is stripped by QCAD.

976dxflibBug ReportLowDXF import errors related to hatches, textsAssigned
0%
Task Description

See:
http://www.qcad.org/rsforum/posting.php?mode=reply&f=30&t=2677

1008QCAD (main)Bug ReportLowDXF (dxflib) compat issuesAssigned
0%
Task Description

Git head as well as 3.4.5 (trial), both with dxflib 3.3.4.0.

Start up QCAD, (with existing or new configuration, doesn’t seem to matter), “Save as” the completely empty drawing, choose “R15 (dxflib)” on Pro (only this one is available on community), save drawing.

Fire up AutoCAD 2000, try to load the empty drawing just saved.

Result:

DXF read error
Error in APPID Table
DXF read error on line 941.
Invalid or incomplete DXF input -- drawing discarded.

Problem not present when a completely empty drawing saved using Teigha in R15 format is opened (ie. it just results in an empty drawing in AutoCAD 2000). Problem is also not present when saving an existing drawing with Pro (trial) with Teigha and opening it in AutoCAD 2000. Problem does present when trying to open a dxflib-saved drawing in AutoCAD 2000.

Empty drawings created with both dxflib 3.3.4.0 in QCAD Pro 3.4.5 trial and Teigha whatever in QCAD Pro trial 3.4.5 are attached. (Community Git 135fd0 is identical to Pro - same dxflib version.)

1542dwg2svgFeature RequestLowdwg2svg: add switch to show only given layer(s)Assigned
0%
Task Description

Implement a command line switch to only show a list of given layers for dwg2* command line tools.

1700dwg2pdfFeature RequestLowdwg2pdf: output multiple layoutsAssigned
0%
Task Description

Add support to specify multiple blocks (layouts) to output (one per page).

1824dwg2pdfFeature RequestLowdwg2pdf does not obey frozen layers in paper-space view...Assigned
0%
Task Description

We currently have a paper-space using two viewports with different layers from the model-space frozen. Unfortunately in the pdf output the layers which are frozen show up.
dwg2pdf should obey the specific frozen layer for each viewport

Showing tasks 251 - 300 of 372 Page 6 of 8<<First - 4 - 5 - 6 - 7 - 8 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing