|
833 | QCAD (main) | Feature Request | Low | Move number of copies into Options toolbar | Assigned | |
|
Task Description
The Number of Copies (Delete Original, Keep Original, Multiple Copies) and whether to use the current layers attributes should be found in the Options toolbar of the active tool.
This way the option would be set before or during the operation (preview?)the popup window afterwards would be obsolete.
|
|
832 | QCAD (main) | Feature Request | Low | Add shortcut to fastly enter ortho mode | Assigned | |
|
Task Description
When drawing or moving objects holding down CTRL should activate ortho snapping as long as CTRL is pressed.
If ortho mode has been active before holding down CTRL should deactivate it (for the time it is beeing pressed).
|
|
831 | QCAD (main) | Bug Report | Medium | Multiple words of non-english language in Richtext are ... | Closed | |
1 |
Task Description
Version - 3.1, binary.
If I “Draw text” with text “aaaa bbbb” - it displays correctly, but when I enter “аааа бббб” (with russian keyboard) - I see that “аааа” and “бббб” are displayed one above other - see screenshot.
The same problem is for imported .dxf file with russian texts in it. Problem makes the solution as a whole actually inusable for (at least, some of) russian users.
|
|
830 | QCAD (main) | Bug Report | Low | multiple menu entries | Closed | |
|
Task Description
win 7-64, QCAD 3.1 Multiple menu entries ? see related topic:http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8031#p8031
|
|
829 | QCAD (main) | Feature Request | Low | Additional options for the Info Tool Area ... | Assigned | |
1 |
Task Description
The Info Tool Polygonal Area is a helpful tool ... but I like to ask for additional options
Yes, the polygonal area makes absolute sense but many times you have just to check a square or rectangle area!
It would be nice and time (click) saving if we could use a “Strg Key” to limit the polygonal area to just a rectangle area. Two mouse clicks for a rectangle area and done
In addition to that it would be nice to have the possibility to count up or down a couple areas. E.g. I measure area 1 plus area 2 or area 1 minus area 2 ... Maybe just with an additional keystroke like + or -
|
|
828 | QCAD (main) | Feature Request | Low | Handle to reposition CAD Tools | Closed | |
|
Task Description
CAD Tools could have a small handle that would make it possible to drop them in a different location. This should not be a header with title, maximize and close buttons like normal dropable windows have. Instead it should be a (dotted) line similar to the one normal toolbars have.
|
|
827 | QCAD (main) | Feature Request | Low | Use Properties Editor to define Properties of newly cre... | Assigned | |
|
Task Description
If there is no selection the Properties Editor could be used to predefine the properties of to be drawn elements.
|
|
826 | QCAD (main) | Feature Request | Low | Show Polygonal Area in the Properties Editor | Closed | |
|
Task Description
If one or more closed Polylines are selected the (summed up) area should be displayed in the Properties Editor.
|
|
825 | QCAD (main) | Feature Request | Low | Move non single straight line away from Line Tools | Closed | |
|
Task Description
Line Tools menu would be way clearer as it would only create single straight lines.
This can be achieved by implementing FS#822 and FS#824 .
|
|
824 | QCAD (main) | Feature Request | Low | Rectangle and Polygon should (optionally) produce Polyl ... | Closed | |
|
Task Description
First of all it would make it easy to move them in one piece. And if additionally FS#823 is implemented (with the option to easily stretch orthogonal to the selected line) this would improve the handling of Rectangles and Polygons significantly.
The tools could then be moved to Polyline Tools or maybe get their own category called Polygon Tools with a Rectangle as Icon.
|
|
823 | QCAD (main) | Feature Request | Low | Add Midpoint Handles to Lines and Polylines | Assigned | |
1 |
Task Description
The Midpoint Handles should be used to move Polyline Segments and lines. This would add easy to access stretch functionality. Combined with a shortcut(hold down shift or alt etc.) to fix the movement to be orthogonal to the line this would bring a lot of extra value. It would also be possible to to have another shortcut to easily insert nodes to Polylines (again hold shift or alt etc.)
|
|
822 | QCAD (main) | Feature Request | Low | move Freehand Line to Polyline Tools | Assigned | |
|
Task Description
In order to be more easily editable after creation Freehand Line should produce a Polyline and should be moved away from Line Tools to Polyline Tools
|
|
821 | QCAD (main) | Feature Request | Low | Underline text option | Assigned | |
|
Task Description
Feature request - to have an option to underline text.
|
|
820 | QCAD (main) | Bug Report | Low | 3.1 beta - No reference manual found | Closed | |
|
Task Description
Windows 7-64
3.1 beta - No reference manual found.
|
|
819 | QCAD (main) | Feature Request | Low | Bring back option to make Hatch patterns in .dxf for QC ... | Closed | |
|
Task Description
Please see topic: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2445
|
|
818 | QCAD (main) | Bug Report | Low | SVG Exporter crashes on polyline | Closed | |
|
Task Description
Attached sample drawing, that kills QCAD 3.1 beta when exporting to SVG.
The crash happens in line 38 of SvgExporterPG in function SvgExporterPG.prototype.exportPolyline
var pp = new RPainterPath(polyline.toPainterPath());
|
|
817 | QCAD (main) | Feature Request | Low | Snap and cut all intersection in a given area tool ... | Assigned | |
|
Task Description
As we all know - from time to time - it is a lot of work to prepare a part of a drawing for a hatch. To get rid of one of the basic task (cutting lines along the desired hatch boundary) it would be nice to have an add-on - or what ever - what would cut ALL intersection in a drawing (or just on one layer, or just based on a selection etc.) with just a mouse click. Then it would be much faster and easier to do the selection for the hatch boundaries. The user could decide to make it directly in his drawing or he like to duplicate the drawing to an extra layer where this function will be used ....
Clive mentioned on this: Maybe a tool like this could be an additional ‘Snap’ selection option - select all snap intersections or select snap intersections within a boundary! then as you suggest ‘cut’ at the intersection points.
|
|
816 | QCAD (main) | Bug Report | Critical | PATCH - Qcad 3.0.14 and 3.1.0.3 : fix compilation error ... | Closed | |
|
Task Description
Hello,
When I try to compile Qcad 3.0.14 and 3.1.0.3 with Gcc 4.7.2 anf Glibc 2.17 on Mageia Linux 3 , I have the following error :
g++ -c -pipe -O2 -Wall -W -D_REENTRANT -fPIC -DQCAD_DLL -DPTHREADS -DHAVE_PTHREAD_H -DQCADCORE_LIBRARY -DQT_NO_DEBUG -DQT_PLUGIN -DQT_WEBKIT_LIB -DQT_SCRIPT_LIB -DQT_SCRIPTTOOLS_LIB -DQT_SVG_LIB -DQT_SQL_LIB -DQT_XMLPATTERNS_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQDESIGNER_EXPORT_WIDGETS -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++ -I. -I/usr/include/QtHelp -I/usr/include/QtDesigner -I/usr/include/QtUiTools -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtOpenGL -I/usr/include/QtXml -I/usr/include/QtXmlPatterns -I/usr/include/QtSql -I/usr/include/QtSvg -I/usr/include/QtScriptTools -I/usr/include/QtScript -I/usr/include/QtWebKit -I/usr/include -I. -Imath -I../grid -I../snap -I../gui -I../entity -I../operations -I../scripting -I../stemmer -I../scripting/ecmaapi -I../scripting/ecmaapi/generated -I../scripting/ecmaapi/adapters -I../io/dxf -I../spatialindex -I../3rdparty -I/usr/include -Irelease -o release/RS.o RS.cpp RS.cpp: In static member function ‘static int RS::getCPUCores()’: RS.cpp:111:22: error: ‘_SC_NPROCESSORS_ONLN’ was not declared in this scope RS.cpp:111:43: error: ‘sysconf’ was not declared in this scope make[3]: * [release/RS.o] Error 1 make[3]: Leaving directory `/home/user/projet-qcad/qcad-3.0.14.0/src/core’
make[2]: * [release] Error 2
|
|
815 | QCAD (main) | Bug Report | Critical | PATCH - Qcad 3.0.14 and 3.1.0.3 : Patch to fix compilat ... | Closed | |
|
Task Description
Hello,
When I try to compile Qcad 3.0.14 and 3.1.0.3 with Gcc 4.7.2 anf Glibc 2.17 on Mageia Linux 3 , I have the following error :
g++ -c -pipe -O2 -Wall -W -D_REENTRANT -fPIC -DQCAD_DLL -DPTHREADS -DHAVE_PTHREAD_H -DQCADCORE_LIBRARY -DQT_NO_DEBUG -DQT_PLUGIN -DQT_WEBKIT_LIB -DQT_SCRIPT_LIB -DQT_SCRIPTTOOLS_LIB -DQT_SVG_LIB -DQT_SQL_LIB -DQT_XMLPATTERNS_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQDESIGNER_EXPORT_WIDGETS -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++ -I. -I/usr/include/QtHelp -I/usr/include/QtDesigner -I/usr/include/QtUiTools -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtOpenGL -I/usr/include/QtXml -I/usr/include/QtXmlPatterns -I/usr/include/QtSql -I/usr/include/QtSvg -I/usr/include/QtScriptTools -I/usr/include/QtScript -I/usr/include/QtWebKit -I/usr/include -I. -Imath -I../grid -I../snap -I../gui -I../entity -I../operations -I../scripting -I../stemmer -I../scripting/ecmaapi -I../scripting/ecmaapi/generated -I../scripting/ecmaapi/adapters -I../io/dxf -I../spatialindex -I../3rdparty -I/usr/include -Irelease -o release/RLocalPeer.o RLocalPeer.cpp RLocalPeer.cpp: In constructor ‘RLocalPeer::RLocalPeer(QObject*, const QString&)’: RLocalPeer.cpp:65:54: error: ‘::getuid’ has not been declared make[3]: * [release/RLocalPeer.o] Error 1 make[3]: Leaving directory `/home/user/projet-qcad/qcad-3.0.14.0/src/core’
make[2]: * [release] Error 2
|
|
814 | QCAD (main) | Bug Report | Critical | PATCH - Qcad 3.0.14 and 3.1.0.3 : Patch to fix GCC 4.7 ... | Closed | |
|
Task Description
Hello,
When I try to compile Qcad 3.0.14 and 3.1.0.3 with Gcc 4.7.2 anf Glibc 2.17 on Mageia Linux 3 , I have the following error :
g++ -c -pipe -O2 -fPIC -Wall -W -D_REENTRANT -DQCAD_DLL -DPTHREADS -DHAVE_PTHREAD_H -DQT_NO_DEBUG -DQT_WEBKIT_LIB -DQT_SCRIPT_LIB -DQT_SCRIPTTOOLS_LIB -DQT_SVG_LIB -DQT_SQL_LIB -DQT_XMLPATTERNS_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++ -I. -I/usr/include/QtHelp -I/usr/include/QtDesigner -I/usr/include/QtUiTools -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtOpenGL -I/usr/include/QtXml -I/usr/include/QtXmlPatterns -I/usr/include/QtSql -I/usr/include/QtSvg -I/usr/include/QtScriptTools -I/usr/include/QtScript -I/usr/include/QtWebKit -I/usr/include -I../../../core -I../../../core/math -I../../../grid -I../../../snap -I../../../gui -I../../../entity -I../../../operations -I../../../scripting -I../../../stemmer -I../../../scripting/ecmaapi -I../../../scripting/ecmaapi/generated -I../../../scripting/ecmaapi/adapters -I../../../io/dxf -I../../../spatialindex -I../../../3rdparty -I/usr/include -Irelease -o release/opennurbs_brep_tools.o ../opennurbs_brep_tools.cpp In file included from ../opennurbs.h:42:0,
from ../opennurbs_brep_tools.cpp:16:
../opennurbs_base64.h:130:22: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] In file included from ../opennurbs.h:93:0,
from ../opennurbs_brep_tools.cpp:16:
../opennurbs_light.h:115:34: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] ../opennurbs_light.h:116:40: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] ../opennurbs_light.h:117:33: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] ../opennurbs_light.h:118:35: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] ../opennurbs_light.h:119:40: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] ../opennurbs_brep_tools.cpp: In function ‘bool CheckForMatchingVertexIndices(int, int, int*)’: ../opennurbs_brep_tools.cpp:399:13: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] ../opennurbs_brep_tools.cpp: At global scope: ../opennurbs_brep_tools.cpp:1981:11: warning: unused parameter ‘start_point’ [-Wunused-parameter] ../opennurbs_brep_tools.cpp:1986:11: warning: unused parameter ‘end_point’ [-Wunused-parameter] ../opennurbs_brep_tools.cpp:2031:11: warning: unused parameter ‘end_point’ [-Wunused-parameter] ../opennurbs_brep_tools.cpp: In member function ‘bool ON_Brep::CloseTrimGap(ON_BrepTrim&, ON_BrepTrim&)’: ../opennurbs_brep_tools.cpp:2084:7: warning: variable ‘coord1_lock’ set but not used [-Wunused-but-set-variable] ../opennurbs_brep_tools.cpp: At global scope: ../opennurbs_brep_tools.cpp:2337:6: warning: unused parameter ‘min_degree’ [-Wunused-parameter] In file included from ../opennurbs_array.h:1548:0,
from ../opennurbs.h:47,
from ../opennurbs_brep_tools.cpp:16:
../opennurbs_array_defs.h: In instantiation of ‘bool ON_SimpleArray<T>::HeapSort(int (*)(const T*, const T*)) [with T = int [2]]’: ../opennurbs_brep_tools.cpp:2769:21: required from here ../opennurbs_array_defs.h:463:7: error: ‘ON_hsort’ was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive] In file included from ../opennurbs.h:67:0,
from ../opennurbs_brep_tools.cpp:16:
../opennurbs_math.h:1403:6: note: ‘void ON_hsort(void*, size_t, size_t, int (*)(void*, const void*, const void*), void*)’ declared here, later in the translation unit make[5]: * [release/opennurbs_brep_tools.o] Error 1 make[5]: Leaving directory `/home/user/projet-qcad/qcad-3.0.14.0/src/3rdparty/opennurbs/opennurbs’
make[4]: * [release] Error 2
|
|
813 | QCAD (main) | Feature Request | Low | New Snap tool: Isometric coordinates ... | Assigned | |
|
Task Description
It would be nice to have an additional Coordinate tool for isometric constructions.
If I’m working on an isometric drawing I have to design my things with x, y, z coordinates. Y is, of course not a problem but for x and z I have most off the time to work with construction lines for move, copy, locate etc. With an isometric coordinate snap tool what will follow the 30° angles for x and z we could save a lot of construction lines
|
|
812 | QCAD (main) | Bug Report | Low | Wrong Alert messages ... | Closed | |
|
Task Description
3.1 Beta / XP32
Two Points (C2), Two Points and Angle (A2), Two Points and Radius (CD), ONE Mouse-click = Alert message: “The two points are identical”
Tangent two circles (LT2), Click on first circle = Alert message: “No tangent possible”, Click on second circle = Alert message: “No tangent possible”
|
|
811 | QCAD (main) | Bug Report | Low | Rectangle(RE) with a defined x,y coordinate start point ... | Closed | |
|
Task Description
QCAD 3.0 / 3.1
Test case: set relative zero, choose rectangle RE tool, choose snap tool coordinate, Now QCAD is asking for the x,y coordinates and my thinking was it will just use them for the start point (what I’m looking for!) - but .... QCAD will use the given coordinates for the Start point of the rectangle(right!) AND as size for the rectangle(wrong!)
|
|
810 | QCAD (main) | Bug Report | Low | Polyline - Simplify, icon missing | Closed | |
|
Task Description
windows 7-64 3.1 beta
Polyline - Simplify option, the icon is missing.
The tool still functions as expected.
|
|
809 | QCAD (main) | Bug Report | Low | Hatch modifications and undo | Closed | |
1 |
Task Description
- Draw ellipse - Fill ellipse (solid or hatch) - Rotate ellipse and filling - Undo
→ Angle of ellipse shaped fill is not undone.
Other hatch boundary elements that break or cannot be undone: - splines from fit points - arcs (when only one point is moved, e.g. stretch) - circles (when radius changes, e.g. scale, position changes) - ellipses (when major point changes)
|
|
808 | QCAD (main) | Bug Report | Low | Strange 'jumpy' behavior when closing drawing windows. | Closed | |
|
Task Description
Test case:
In Windows, set up say 2 or 3 new blank drawings.Then close them down one by one and notice the behavior when closing these drawing windows down!
|
|
807 | QCAD (main) | Feature Request | Low | Option to add a folders in the layer list | Closed | |
|
Task Description
It would be useful to have an option to be able to add new folders in the layer list, to group certain layers together in a folder when needed, this would reduce the layer list length and make it easier to navigate to certain layers (would be useful for me anyway!).
This feature might also be useful for the block list too!
|
|
806 | QCAD (main) | Bug Report | Low | File - Print , not working | Closed | |
|
Task Description
Windows 7-64
Selecting print from Main menu > File > Print - not working.
Print function only working from selecting the Print icon button from within the Print preview stage!
|
|
805 | QCAD (main) | Feature Request | Low | Create tool radius compensation / tool path generation | Assigned | |
|
Task Description
This is how I would implement this:
This would be a modification tool. Parts are selected, a toolpath is generated, and a dialog pops up to allow putting the tool path into an existing layer, a new layer, or replace all drawings in an existing layer.
This is how the toolpath is generated:
We iterate through all elements and explode everything but text into line segments. Then we connect the line segments into chains wherever the line endpoints are less than some tolerance away from each other. The chains can be very chaotic, but at least we have separate entities for now.
For every chain, we need to find the largest complete loop. A good drawing would only contain non-overlapping loops, but we can’t expect that. Everything that is not on this loop can not be defined as a part or as a hole, so we will merely create a tool path segment that is equivalent to the line segment. Every segment that *IS* on a loop is either an outside edge (part outline), or an inside edge (hole outline), (or overlapping, in which case it is neither, and we have an operator problem).
In a perfect world, we need to find exactly which shape is inside which other shape, and then create alternating tool offsets from the outmost loop (part edge) to the second outmost (hole), to the next (part) etc. .
In a simplified world, we can used the bounding box of the loop instead. This works OK for rectangular shapes, but a circle next to an “L” shape could be seen as inside the L’s bounding box, hence inside the L, wrongly accused of being a hole, not a part.
Now all that is left to do is to create a new loop, offset by the tool radius. Oh, and since we have the connections from line segment to line segment in the correct order already, we can use the opportunity to order all cutting loops from inner to outer, or from small to large, and order non-loop edges by travel distance.
The new drawing in the new layer can now be exported without further hassle to create a nice laser cut file.
PS: of course, a user could create multiple layers for marking, cutting, enraging, etc. . Additional Layer attributes for cutting speed and laser power (and a few more) would be needed.
|
|
804 | QCAD (main) | Bug Report | Low | "Color by Layer" uses wrong Layer for Blocks | Closed | |
|
Task Description
Not sure whether this is intentional, but IMHO it is not logical and wrong:
When loading a block that has a drawing set to “color by layer” into any layer but “0”, it will still always show the color of the “0” layer.
However, it should show the color of the layer that this Block is in (this is likely true for all the other attributes).
|
|
803 | QCAD (main) | Bug Report | Low | Pan and Zoom with touch pad are hard to use (wrong buff ... | Closed | |
|
Task Description
Version: V 3.0.9 and earlier.
How to reproduce: Go into App Preferences, in Graphics View→Navigation, enable pan gesture. Now add any drawing and pan around for ten seconds quickly, not taking the fingers off the mouse/touch pad. Take the fingers off the pad now.
What goes wrong: QCad will pan around the drawing for another 30 seconds or so, dutifully executing all the buffered mouse moves.
Suggested solution: Qt buffers more mouse pan-moves than QCad can handle. QCad executes every move in the buffer, making the pan feature close to unusable. The zoom function has the same bug, but it much less pronounced.
This is easily solved: when receiving a pan event (two finger scroll), just check if there are more events in the queue. If there are, accumulate the effect, but don’t draw yet. As soon as the buffer is empty, kick off the redraw. The result is a *much* more fluent and responsive user interface.
Please fix soon. This wonderful feature makes life so easy, but currently it is unusable. Thanks. Matthias.
|
|
802 | QCAD (main) | Feature Request | Low | User defined toolbar | Assigned | |
|
Task Description
It would be a nice feature to be able to define your own toolbar.
See: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2393
|
|
801 | QCAD (main) | Bug Report | Low | Different solid appearence in Autocad and Qcad | Closed | |
|
Task Description
Hi,
It seems that QCAD and Autocad treat solid fills differently. Here is attached example and its view in QCAD and autocadws.com web service. I found that order of vertices is important.
Thank you Mikhail
|
|
800 | QCAD (main) | Feature Request | Low | Configurable auto snap | Closed | |
|
Task Description
Enable / disable individual snaps for use with auto snap.
|
|
799 | QCAD (main) | Bug Report | High | Detect duplicates not working properly | Closed | |
|
Task Description
Windows 7-64 3.0.9 Detect duplicates tool not working properly. Selecting this tool causes program to lag endlessly and malfunctions. To reproduce bug: 1. Select all entities. 2. Select duplicates tool. 3. Nothing happens. 4. Select duplicate tool again and...bug!
|
|
798 | QCAD (main) | Feature Request | Low | elaborate on purge tool | Assigned | |
1 |
Task Description
Modify the “purge layer” tool to preserve empty layers with a locked status. see: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2386
|
|
797 | QCAD (main) | Bug Report | High | QCAD hanging after loading working file | Closed | |
|
Task Description
I have the german Version of QCAD 3.0.0. After starting QCAD I load my current work file (an architecture one). After loading I get two working Areas in QCAD and after a while the complete Software QCAD (only QCAD) is hanging. It is not possible to close the QCAD SW with the task Manager of Windows 7. Only to log out helps to Close or remove the running SW. The attachment Shows a Screen copy. The view is when you see through milky glasses to QCAD.
I bought this SW a few days ago and then this happened. I have spend a lot of time to generate my Project and now this.
Is there any one who knows what the Problem is? Is that a Problem of thw QCAD SW or can be the problem my current work file (generated with QCAD on my Notebook). Note, Problem happens on my work Station. I have started to work on my Notebook, but i found out that the Screen is to small to work with QCAD. So i moved the SW to my work Station. (Both working with Windows 7) This to get more Details abou the handling and whathappens before.
Would be great to get a quick Response or better a working solution for my Problem. When you need more details please let me know.
[Edited by Admin for profanity]
|
|
796 | QCAD (main) | Bug Report | Low | Pasting to current layer results in empty layers being ... | Closed | |
1 |
Task Description
Initial situation: A drawing with two visible layers: One for the outline and one for hidden lines. A second empty drawing with the standard 0 layer.
The bug: When copying the objects from the first drawing and pasting them to the current layer of the second drawing, both layers present in the first drawing are created and are empty. I suppose that’s not the way it was intended. I expected the selected objects being pasted to the current layer and NO extra layers being created.
|
|
795 | QCAD (main) | Bug Report | Low | Render circular arcs precisely - tool query | Closed | |
|
Task Description
Although in my re-testing of this tool with 3.0.8 everything seemed fine I have since noticed that it only seems to work for line-weights of 0.5 mm and larger! using a line weight of 0.00 produces the original non precise result.
Is this expected behaviour or is something still not quite right for this?
see topic: http://www.qcad.org/rsforum/viewtopic.php?f=33&p=7684&sid=6121271d19c37dd6454644eacb4d33c4#p7684
|
|
794 | QCAD (main) | Bug Report | Low | Applying Solid grid lines - not working | Assigned | |
1 |
Task Description
Windows 3.0.8 Application preferences > Graphics View > Appearance - Solid grid lines doesn’t change anything?
|
|
793 | QCAD (main) | Bug Report | Low | Wacom Intuos tablet with mouse not working | Closed | |
|
Task Description
Intuos Mouse (moving around on the Intuos Tablet)
does work for drawing and marking with the left button on the drawing area
does work for zooming in and out with the middle-button wheel
does work for calling up context menus with the right button on the menu bar and the layer list window
does not work with the left button for actually clicking any menu item (Edit, View, ..) nor action icon on the top nor the left (e.g., draw lines, measure, zoom, undo, save, ..) nor the layer window (e.g., toggle visible, lock layer) nor the property editor.
Wacom mouse model: ZC-100-01 win7-64 sp1
|
|
792 | QCAD (main) | Feature Request | Low | New 'Match' properties tool | Assigned | |
|
Task Description
To add a new ‘Match’ properties tool.
For example, I have a large drawing with lots and lots of entities on various layers and I want to select some entities (say 500 or more) which are all on different layers and change all these selected entities to match the properties of one other particular entity - but, but I want the ‘Matched’ entities to remain on their own layers.
OK, of course I can use the property editor for this and this is fine in most instances but I would first need to determine the the layer data for the properties of the entity I would like to match to (Color, Line weight and Line type) in the first place and then I need to remember these attributes in order to change things in the property editor in order to change all of my selection to match!
As I say mostly the above procedure would be fine to use but for convenience it would be great to have a new tool to do all this for me and cut out a few steps in the process.
A new ‘Match’ properties tool procedure could be something like this:
1. Select Match properties tool.
2. Select all entities to be matched.
3. Select entity to match to.
4. Tick or leave un-ticked - move to same layer.
5. Complete process.
* Actually, while writing this I`ve just thought of another useful addition which could be added to the Info tool set, ‘Entity’ properties info! Example - click on Info > Entity Properties and click on the entity in question and then the properties are displayed without going to the layer data for this! Just an idea ;)
|
|
791 | QCAD (main) | Bug Report | Low | Info Tool Polygonal Area closing with right mouse click ... | Closed | |
|
Task Description
3.0.8 Setting: Application Preferences - Widgets - Command line - Show information as dialog: Ticked!
If I use the Info Tool Polygonal Area and decide to close it with a right mouse click the “Show information” dialog window pops up - just as expected. If I close the Dialog window with the OK Button .... a “CAD Tools” Menu pops up. Not expected
By the way - any chance to control the number of digits after the decimal point in the Info dialog window? 15 decimal places are most of the time just to much!
|
|
790 | QCAD (main) | Feature Request | Low | Dimension Setting - Extension Line - total length setti ... | Closed | |
|
Task Description
It would be nice to have the option for a “Short” Extension Line. This is often used in Architectural drawings. Yes, I know that I can explode a dimension and change it to that what I’m asking for - but that is really a Sisyphus task and destructs the function of a dynamic Dimension in QCAD.
|
|
789 | QCAD (main) | Feature Request | Low | Scale tool - mouse-pointer - inversely proportional sca... | Assigned | |
2 |
Task Description
3.0.8. Bug Report or Feature Request ..... I’m not sure!
If I use the mouse-pointer in the Scale tool I’m not able to do an inversely proportional scale. x - y locked or unlocked doesn’t matter in combine with the mouse pointer ...
|
|
788 | QCAD (main) | Feature Request | Low | Extra option to detect duplicates only in user defined ... | Assigned | |
2 |
Task Description
It would be very useful to have an extra option to only detect duplicates within a user defined area.
|
|
787 | QCAD (main) | Feature Request | Low | Hatch generator - plug in tool? | Assigned | |
|
Task Description
Would it be possible to make a Plug in tool for a Hatch generator, so custom made hatches can be saved as .pat files?
I have a lot of up and coming future projects that I would like to make my own ‘custom’ hatches for.
|
|
786 | QCAD (main) | Feature Request | Low | Multi - Breakout tool | Assigned | |
2 |
Task Description
A ' Multi ' Breakout tool or added option to the existing Breakout tool.
For example see attached image.
An option to remove all segments within a chosen boundary would be good, in my example I want to remove all the hatching within the Red circle.
So after exploding the Hatch, currently I have to remove all segments singularly!
Of course I could have placed the circle first and hatched around it - but in this and most instances it is easier to design and to produce the Hatching first and then place my circle/shapes etc.
|
|
785 | QCAD (main) | Bug Report | Low | Hatch at scale 1/10 not completed on 500 mm x 500 mm s ... | Closed | |
|
Task Description
Windows 7-64 3.0.8
I’ve not been able to hatch a simple Brick pattern at a scale of 1/10 on anything larger that 500 mm x 500 mm.
*Scale of 1:1 works fine *Scale of 1/10 works fine on Squares 400 mm x 400 mm or less!
To reproduce: 1. Draw square of 500 x 500 mm. 2. Select and execute Hatch command using Brick pattern (but I suspect the result will be the same with any pattern). 3. Result in selection states a Hatch but no hatch is present!
Please see attached image:
|
|
784 | QCAD (main) | Feature Request | Low | Turn text into hatched polylines | Assigned | |
1 |
Task Description
Would it be possible to add a feature which turns selected text into solid fill hatched polylines?
That would make it possible to migrate the drawing from one computer system to another without having to worry whether the used font is installed on both systems, like when sending a drawing to a manufacturer for laser engraving.
Right now I can do it by hand, letter by letter, and that is a rather labour-intensive task.
|