QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategory  ascTask TypeSeveritySummaryStatusProgress
 1803 QCAD/CAMBug ReportLow CAM configuration output unit fixed in inch instead of  ...Closed
100%
1 Task Description

Ij window CAM Configuration output unit appears as inch instead of mm. All parameters are in option
when create a nc file,units are in inches not in mm. unsuable and not possible to change

 1812 QCAD/CAMBug ReportLow Coordinate display: coordinates not updated while mouse ...Closed
100%
Task Description

The coordiantes (in the lower left corner) freeze while mouse is moving. Updates as soon as the mouse is stopped.

This slows me down considerably. I have to stop, wait (too see the coordinates), move, stop, wait, move back, stop, wait, move, stop wait... This gotta be a bug?

MacOS 10.12.6

 1813 QCAD/CAMBug ReportLow CAM Export: missing G01 Closed
100%
Task Description

Trying the EleksMaker EL01 Laser router I noticed some bugs in creating pathways, rapids, tolerance and homing.

See the attached pdf

 1814 QCAD/CAMBug ReportLow FS#1813 Revisited Closed
100%
Task Description

 FS#1813  Revisited. (Several bugs in QCAD/CAM 3.21.3. when generating G-code in “G-code Laser (offset).)

Hi Andrew,

After closing the bug notification I realised I didn’t add the DXF. My apologies for not attaching the DXF-file at hand.

Fortunately I am not the only one;

You can fix the missing G01 by replacing your file postprocessors/GCodeLaserOffsetMM.js with the attached updated file.

Since it was not attached, that makes two of us.

Anyway I have attached the DXF-file to be tested.

1815QCAD/CAMFeature RequestLowAdd Laser tool optionAssigned
0%
Task Description

Hi Andrew,

Creating G-code for cnc-laser, the laser-tool can not be correctly set at all.

Attached a laser tool proposal

 1816 QCAD/CAMBug ReportLow TAB function in CAM module fails  Closed
100%
Task Description

When using (adding a TAB on a radius fails).

Example:

When length of the TAB is set to 1 mm.

After export to *.nc code the code is not ok.

And then check this is NC viewer or gcode sender the length is not set to 1 mm but is smaller.

On a line this function (TAB) is correct working.

 1817 QCAD/CAMBug ReportLow CAM Export: offset fails for contours with arcs (tolera ...Closed
100%
Task Description

After regenerate selected toolpath OR regenerate all toolpath.

The result of the output is every time different.

When pushed for example 2 or 3 times this button.

See pictures

 1830 QCAD/CAMSuggestionLow HP7580 Penplotter Closed
100%
Task Description

Hi Andrew,

I was fiddeling around with a copy of the hpgl postprocessor, and has it adapted, up and running for a HP7580 penplotter. You may add this to QCAD if you like.

Poking and peeking in the other postprocessor files, I found enough information to generate a very acceptable hpgl.plt file now, including the required pen changes.

The purpose of a ‘bracket-field’ (as [S] ) is clear to me. Where are [S#] and [S!] used for?

1841QCAD/CAMFeature RequestLowQCAD/CAM Postprocessor "Hpgl": Add pen colors to HP/GL ...Assigned
0%
Task Description

Add SPx; with x being pen number from 1-8.

TODO:
- Which color corresponds to which pen number?
- What if there are more than 8 colors in a DXF files?

1843QCAD/CAMBug ReportLowCreating ToolPath StallsAssigned
0%
Task Description

Hi Andrew,

Still working with and on CAM HPGL for the HP7580 pen plotter.

I have added a penplotter test drawing, that might be used for testing en callibrating plotter and pens. You may add it to the Examples-directory.

QCAD has a lot of trouble creating toolpaths and exports. Much too often it shuts itself down, or gets stalled. Why? I am not sure.

1844QCAD/CAMFeature RequestLowHP/GL (PLT) importAssigned
0%
Task Description

Hi Andrew

QCAD/CAM misses a hpgl.plt import. If gerber and G-code can, so should plt.

1846QCAD/CAMFeature RequestLowToolpath preset offsetsAssigned
0%
Task Description

Hi Andrew

A request for adding some fields to the toolpath

1847QCAD/CAMBug ReportLowBUG MEMORYAssigned
0%
Task Description

Hi Andrew,

Still working on creating HPGL.PLT toolpaths for the HP7580 pen plotter. QCAD has some trouble creating toolpaths. Too often it shuts itself down, or the PC gets stalled.

Recreating the same error however is possible

 1850 QCAD/CAMBug ReportLow Toolpath error Closed
100%
Task Description

Hi Andrew,

While generating a toolpath I stumbled upon an odd error.

1877QCAD/CAMFeature RequestLowPost Processor TutorialAssigned
0%
Task Description

Hallo Andrew,

I am still busy on the never ending G-code story. Doing so I wrote a small Post Processor Tutorial for all those nerds who wants to write their own. If you like it you might add it to QCAD. However, since English is not my native tongue I suggest checking it would be wise.

Meanwhile I have downloaded the source code, and could not find the CAM’s Drill-path-script. I am now using a negative Drill Cut Depth to set a Laser Dwell time, were as a field “Dwell Time (in seconds)” in the Drill-path would be more appropiate. Is this script open source available or is it part of ‘closed part’ of QCAD?

1901QCAD/CAMFeature RequestLowCAM Traverse ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very common Traverse Toolpath.

Example added as pdf.

Greetings

1902QCAD/CAMFeature RequestLowCAM G-Block ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very handy G-code Block Toolpath. This ‘toolpath’ also solves a lot of “editing requests”.

 1907 QCAD/CAMBug ReportLow having issues importing and opening dxf files  Closed
100%
Task Description

can not import dxf files

1911QCAD/CAMFeature RequestLowDrill ToolpathAssigned
0%
Task Description

Hallo Andrew

It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.

1912QCAD/CAMBug ReportLowTool Description ErrorAssigned
0%
Task Description

Hallo Andrew,

Testing the drill toolpath I find it hard to select the correct tool by a small bug

1913QCAD/CAMBug ReportLow3D Simulation Behaves oddAssigned
0%
Task Description

Hallo Andrew,

testing the drill toolpath I used single point markers.

In 3D simulation the tool drills the toolpath AND uses the drill as a mill.

Cam Export and generated G-code is not effected.

 1914 QCAD/CAMFeature RequestLow CAM layer On/Off Closed
100%
Task Description

Hallo Andrew

If CAM layer invisible do not 3D Simulate and do not write G-code.

1940QCAD/CAMFeature RequestLowCAM > CAM Configuration: Add program descriptionAssigned
0%
1 Task Description

Add a program description to the CAM configuration dialog and export to postprocessors as variable.

See also:
https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649

 1946 QCAD/CAMBug ReportLow CAM > Cam Legacy Export: Cut inner paths before outer p ...Closed
100%
Task Description

The option “Cut inner paths before outer paths” is ignored, causing trouble when outer paths are cut first.

Attached is a link to the script files and gcode examples.

1954QCAD/CAMReleaseLowRevised PWM Post ProcessorAssigned
0%
Task Description

Hallo Andrew,

I have revised the PWM Post Processor to Revision D.

 1962 QCAD/CAMBug ReportLow CAM > Drill Toolpaths: Cannot be edited / updated from  ...Closed
100%
Task Description

Hallo Andrew,

Found a bug in the drill toolpath generator.

 1963 QCAD/CAMBug ReportLow Bug Font Standard OR Cam Config Closed
100%
Task Description

Hallo Andrew

Confronted with a bug in font Standard glyph ”s” (small S),
and a solution.

 1967 QCAD/CAMBug ReportLow Development snapshot: Toolpath generator problem Closed
100%
Task Description

Hallo Andrew,

I had updated QCAD/CAM to 3.23.0.2 and I am confronted with a major bug in the toolpath generator.

1971QCAD/CAMBug ReportLowCAD/CAM 3D SimulatorAssigned
0%
Task Description

Hallo Andrew,

Found a bug in the 3D Simulator execution

 1981 QCAD/CAMFeature RequestLow I would like an external post processor Closed
100%
Task Description

I use gcode ripper for some of my jobs. (see here: https://www.scorchworks.com/Gcoderipper/gcoderipper.html) This is a large python script that I use to wrap flat code around a cylinder for engraving. What I would like to see is a way to run it from my own custom post processor that I wrote for my machine. Maybe some kind of keyword that allows me to specify an arbitrary external command with some parameters. It would be very helpful to me. I create a lot of ad-hock jobs to run.

Thanks,
Chuck Tilbury

 1992 QCAD/CAMBug ReportLow Regenerate All Error Closed
100%
Task Description

Hallo Andrew,

I experienced some odd behaviour when using a final Regenerate All before an Export.

 1997 QCAD/CAMBug ReportLow CAM > CAM Export: Fails for new document created Closed
100%
1 Task Description

When I create a simple drawing, I cannot export the gcode until I restart qcad.

general steps to reproduce the issue:
1. open a new drawing
2. Add a letter “D” near the origin in Arial font, about 7mm tall.
3. explode it
4. save the drawing
5. Fill in in the “cam configuration” 6. Select the drawing and generate the tool paths.
7. Hit the “export button” or the menu item.
8. Observe that you see the “camexport” command appears in the command section, but there is no file generated for the gcode.

If you restart qcad, then the gcode will export as expected. Also, it appears to work for more complicated drawings. I had the same issue, when I tried to generate the same thing, but using the string “November 2019” at 5mm height. I am using up to date MX Linux with kernel version 4.19.0. I also observed this behavior under Windows 10 professional.

 2000 QCAD/CAMBug ReportLow CAM > Nesting: misleading "Sheet added" confirmation Closed
100%
Task Description

Within the nesting preparation:
A left mouse click to add a sheet will always be confirmed with “Sheet added”, regardless of a proper selection or where the left click is done in Model_Space.

 2001 QCAD/CAMBug ReportLow CAM > Nesting: Alignment fails Closed
100%
Task Description

Description for the CAM Nesting alignment:

Quote:
Alignment: Parts are arranged with the chosen alignment in mind. An alignment of “Left - Bottom” means that parts are shuffled to the left (primary alignment) and towards the bottom (secondary alignment).
Quote end

I tested a few scenarios. e.g
a Top Left, Align → leads to a top right alignment,
a Top left, Hull → leads to a Bottom Left alignment,
etc.

 2003 QCAD/CAMBug ReportLow QCADCAM Crashes when starting up Closed
100%
Task Description

I am trying to run the QCADCAM v3.23.0 64 bit version under Windows 10 x64. When I start the program, I get the splash screen showing it loading all of the plugins. When it gets to around 67% (Gerber stuff), the program crashes. I get the following exception:

Unhandled exception at 0x00007FFC5F51C706 (MxMGLV64.dll) in qcad.exe: 0xC0000005: Access violation reading location 0×0000000003304318. occurred

I also loaded the 64 bit version of just plain QCAD and it works with no problems.
I also tried loading the 32 bit version of QCADCAM and while it does not crash, it does not display any of the menus, toolbars, or toolboxes. it displays only a black screen with the title bar.

 2024 QCAD/CAMBug ReportLow CAM > Nesting: Nesting blocks with multiple parts fails Closed
100%
Task Description

Case:
Nesting quantity all test: 3

Nesting block2 = works
Nesting block1 = fails (placed outside sheet),
Nesting both blocks = fails (placed partly outside sheet),

 2025 QCAD/CAMBug ReportLow Set Nesting Quantity shows wrong quantity Closed
100%
Task Description

If I set “Set Nesting Quantity” to e.g. 5 it will remember this number within the session.
If I need to check which number I’ve used last time there is no way to find the actual used value - it will show me always 1.
If I restart QCAD/CAM the value is completely lost and the nesting tool tries to fit in as much as possible into the sheet - regardless that the quantity number still shows one.

It would be nice to have a remember function even after restarting QCAD/CAM and have some kind of possibility to see the last used value.

 2028 QCAD/CAMBug ReportLow CAM > CAM Export: Fails for new document created Closed
100%
Task Description

1. Load drawing
2. Create new drawing
3. Add toolpath / tool
4. CAM > CAM Export

Fails to identify current config (post processor).

 1237 QCAD/CAMBug ReportMedium Blocks should be layer agnostic Closed
100%
Task Description

I have created a block from a selection. I have then later created more items on my CAD page using that block, then later yet, moved the objects to a new layer. I noticed that while the object has accepted being on the new layer, the color hasn’t changed to the new layer’s color. I can only get the line color to change if I go into the block itself and move the individual segments of the block to that new layer, then save the new block (which, by the way, I can’t save over the existing block?!?!)

In the sample file attached, you will see that the block item in the 3 o’clock position is in layer 0, while the rest are in “Vent Holes” layer. If you make layer 0 hidden, the one block is hidden (like it should), but the block item refuses to take on the layer’s color even though the block’s color is “By Layer”

 1293 QCAD/CAMBug ReportMedium Crash when snapping to intersection points between 3d l ...Closed
100%
Task Description

I have a file that makes QCAD crash. I’ve been editing this design across different versions of QCAD over time and this is the first time I have a problem with it.

Steps to reproduce:
Open the attached file and try to add some entities or dimensions to it (you may need to create large ones since it seems to depend on the zoom factor; for example a very large ellipse). After a freeze of a few seconds QCAD will quit.

The attached file is a simplified version from which I deleted a number of entities; on the original I can’t do anything – QCAD crashes as soon as I try to create any object.

Cause: 3D lines with x1==x2, y1==y2 but z1!=z2

 1564 QCAD/CAMBug ReportMedium QCAD/CAM: black main window or main window not painted  ...Closed
100%
Task Description

QCAD/CAM version 3.16.7.1 (snapshot release)

QCAD/CAM version 3.16.7.1 for Ubuntu Linux starts up with a totally black screen with only the title bar showing. By clicking around at the top of the screen I can get the menus to drop down and appear over the blank black screen. That is how I captured all the version information below. QCAD/CAM version: 3.15.5.0 for Ubuntu Linux starts with all the normal screen graphics appearing normally. I labeled this bug report as critical because QCAD/CAM is unusable on Ubuntu Linux, but for me it is not so critical since I can use the Windows version.

Versions
QCAD version: 3.16.7.1
Date: Mar 22 2017
Qt version: 5.8.0
Compiler version: gcc 4.8.1
Build Date: Mar 22 2017
Revision: 17a80fac27c3ae6aa68cd4ee15ffa4f3e2ab0a9a

Architecture: x86_64
OS: Linux
OS version: Unknown

Locale
QCAD locale: en
Name: en_US
Country: 225
Country name: United States
Language: 31
Language name: American English
Script: 7
Script name: Latin
Decimal point: 46
Negative sign: 45
Positive sign: 43
Text direction: 0
System codec: UTF-8

Arguments: /home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/qcad-bin

Plugins
Description=CAM tools.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadcamscripts.so
ID=CAM
License=Proprietary
Name=CAM
NamePostfix=/CAM
PurchaseURL=http://ribbonsoft.com/add-ons/qcadcam-purchase QtVersion=5.8.0
SplashOverride=:/scripts/Cam/splashscreen.png
[email protected]=:/scripts/Cam/[email protected]
URL=http://ribbonsoft.com/add-ons/qcadcam Version=3.16.7.1

FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcaddwg.so
ID=DWG
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
SystemCodePage=0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1 (Teigha® 4.02.2.0)

Description=Import/export support for the DXF format. Based on dxflib.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcaddxf.so
ID=DXF
License=GPLv2+
Name=DXF
QtVersion=5.8.0
URL=http://www.qcad.org Version=3.16.7.1 (dxflib 3.12.2.0)

Description=OpenGL ES 3D display.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadgles3d.so
ID=GLES
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Description=Integrated help browser.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadhelp.so
ID=HELP
License=Proprietary
Name=QCAD Pro
QtVersion=5.8.0
URL=http://www.ribbonsoft.com Version=3.16.7.1

Description=Polygon clipping, boolean polygon operations, path offset.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadpolygon.so
ID=POLYGON
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Description=QCAD Professional tools.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadproscripts.so
ID=PROTOOLS
License=Proprietary
Name=QCAD Pro
NamePostfix= Professional
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Description=Polygon triangulation.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadtriangulation.so
ID=TRIANGULATION
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Environment
LC_TIME=en_US.UTF-8
DESKTOP_SESSION=default
SSH_AGENT_PID=1743
[email protected]=ibus
LOGNAME=dave
QT_ACCESSIBILITY=1
PAPERSIZE=letter
HOME=/home/dave
LC_NUMERIC=en_US.UTF-8
XDG_DATA_DIRS=/usr/share/default:/usr/share/gnome:/usr/local/share/:/usr/share/:/var/lib/snapd/desktop
XDG_VTNR=2
SHELL=/bin/bash
XDG_SEAT=seat0
GIO_LAUNCHED_DESKTOP_FILE=/home/dave/Desktop/Ribbonsoft-qcad.desktop
WINDOWPATH=2
QT_IM_MODULE=ibus
XDG_SESSION_TYPE=x11
XDG_RUNTIME_DIR=/run/user/1000
LC_MEASUREMENT=en_US.UTF-8
LC_TELEPHONE=en_US.UTF-8
XDG_CURRENT_DESKTOP=GNOME
UNICODEMAP_JP=cp932
DEFAULTS_PATH=/usr/share/gconf/default.default.path
LC_PAPER=en_US.UTF-8
XAUTHORITY=/run/user/1000/gdm/Xauthority
LC_ADDRESS=en_US.UTF-8
LC_IDENTIFICATION=en_US.UTF-8
QT_STYLE_OVERRIDE=gtk
LC_NAME=en_US.UTF-8
GIO_LAUNCHED_DESKTOP_FILE_PID=13310
LC_MONETARY=en_US.UTF-8
XDG_SESSION_DESKTOP=default
GTK_MODULES=gail:atk-bridge
XDG_MENU_PREFIX=gnome-
XDG_SESSION_ID=1
QT_LINUX_ACCESSIBILITY_ALWAYS_ON=1
XDG_CONFIG_DIRS=/etc/xdg/xdg-default:/etc/xdg
DISPLAY=:1
LD_LIBRARY_PATH=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64
PWD=/home/dave
USER=dave
SHLVL=1
_=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/qcad-bin
MANDATORY_PATH=/usr/share/gconf/default.mandatory.path
LANG=en_US.UTF-8
SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-S2ePMZG3dG,guid=e590a63ac7ca3b971f776cae58d663c0
GDMSESSION=default
GNOME_DESKTOP_SESSION_ID=this-is-deprecated
SESSION_MANAGER=local/OPA:@/tmp/.ICE-unix/1681,unix/OPA:/tmp/.ICE-unix/1681
USERNAME=dave
PATH=/home/dave/bin:/home/dave/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin

 1646 QCAD/CAMBug ReportMedium 3.18 has a HATCH issue Closed
100%
Task Description

If you pres the “hatch icon” then the word “hatch” appears in the command window, but. . . nothing happens.

But if you type “hatch” followed by “enter” then finally the Hatch Window pops up.

 1820 QCAD/CAMBug ReportMedium CAM Export: exporting text entities broken Closed
100%
Task Description

Hi Andrew,

Kubuntu, QCAD/CAM 3.21.3

Font Standard. Selected as ‘single line’ font for engraving with mill or laser.

While CAM Exporting as G-code Laser (Offset) MM, or as Linux CNC, Exporting gets trapped in a loop.

In Font Standard the glyph’s ? & $ @ s S Q and 2 contains unwanted Z-movements. It seems these glyphs entities are not alligned properly; endpoint last line does not meet startpoint next line; why else the Z-movements?

Could this misallignment also traps Exporting?

 1848 QCAD/CAMFeature RequestMedium PWM Laser Closed
100%
Task Description

Hi Andrew,

I have added a PWM Laser post processor.

You can add it to QCAD’s post processor directory

 1970 QCAD/CAMPerformance IssueMedium Drill Toolpath Workaround Closed
100%
Task Description

Hallo Andrew,

Fiddling with the drill-toolpath error, a solution seems to be to add the drill location as a ‘single point’ in the ‘source’ sublayer. I am using this as a Bug Work Around.

 1076 QCAD/CAMBug ReportHigh Crash on Mac OS X when using internal Trackpad Closed
100%
1 Task Description

Hi,

I have just updated my Mac OS from 10.9.2 to 10.9.4. QCAD 3.6.2 seems to be working normally under the newest version of Mac OS, but has developed a very specific bug which leads to reproducible crashes when a text object is edited.

Steps to minimally reproduce:
1. Open QCAD
2. Create a text object
3. Place the text object on the canvas
4. double-click the text object and edit its contents
5. click OK to accept changes
6. repeat from step 4 three or four times.

After several attempts to edit a text object, QCAD will crash with EXC_BAD_ACCESS (SIGBUS) in thread 0 (QCoreApplication).
The crash can also be triggered by moving the text object around on the canvas (instead of editing its contents).
The bug does not require anything else (no other objects on the canvas, no particular font, occurs in both new and previously saved documents).

Apart from this bug, QCAD seems to work fine on OS X 10.9. The text editing crash did not occur before the latest OS update. No other applications on my system seem to be having any problems. If this problem can be fixed, I think QCAD will be quite usable on 10.9.

See also related bugs in:
 FS#1091 

 1137 QCAD/CAMBug ReportHigh segfault creating dashed spline (without addons) Closed
100%
Task Description

Hello,

This is my first real bug report so please advise how i could provide more useful information.

I am not certain if the severity is correct.

The bug: segfault when creating a spline with a dashed linetype or opening a file containing one.

The bug isn’t present with the dwg extension installed

Steps to reproduce:
1. create drawing
2. create spline
3. set linetype to dashed
4. crash

 1322 QCAD/CAMBug ReportHigh Fonts mixed up witch code tables Closed
100%
Task Description

Hi,

In ‘Application preferences, Draw, Text’ fonts can be selected.

There is a mixing up between fonts (the appearance of characters on screen) and code tables (what digital code is used for each character).

‘ISO8859-11’ is the 8 bit Thai (!) code table and not a font
‘Unicode’ is the 16 bit code table and not a font.

For downward comptability QCAD should use default font Standard (ISO3098) with code table ISO8859-1 (US-ASCII Latin-1).

 1465 QCAD/CAMBug ReportCritical Circle is drawn as polygon Closed
100%
Task Description

Hi,

I have a circle and circle is not round.
Unit of drawing is in metres and radius is set to 2.38.
The circle displays as a polygon instead.

 1941 Snapshot ReleaseBug ReportLow Invisible layers displayed Closed
100%
Task Description

Snapshot release 3.23.0.2

See also:
https://qcad.org/rsforum/viewtopic.php?p=24757

Showing tasks 1951 - 2000 of 2032 Page 40 of 41<<First - 37 - 38 - 39 - 40 - 41 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing