QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategory  ascTask TypeSeveritySummaryStatusProgress
 1418 QCAD/CAMFeature RequestLow Layerlist and hidden sublayer Closed
100%
Task Description

The layerlist shows at any operation all sublayer, even if they were previously hidden!

 1183 QCAD/CAMBug ReportLow Info arc area specified on drawing is not the same as s ...Closed
100%
Task Description

Info arc area specified on drawing is no where near the same as shown in properties editor.

 1830 QCAD/CAMSuggestionLow HP7580 Penplotter Closed
100%
Task Description

Hi Andrew,

I was fiddeling around with a copy of the hpgl postprocessor, and has it adapted, up and running for a HP7580 penplotter. You may add this to QCAD if you like.

Poking and peeking in the other postprocessor files, I found enough information to generate a very acceptable hpgl.plt file now, including the required pen changes.

The purpose of a ‘bracket-field’ (as [S] ) is clear to me. Where are [S#] and [S!] used for?

1844QCAD/CAMFeature RequestLowHP/GL (PLT) importAssigned
0%
Task Description

Hi Andrew

QCAD/CAM misses a hpgl.plt import. If gerber and G-code can, so should plt.

 1585 QCAD/CAMBug ReportLow hide/show layer delay Closed
100%
Task Description

Hi !
i’m trying the new qcad/cam 3.17.1 and i have a delay when i hide and show a layer..
(linux MINT 17.2 x64)

The function is working, but the layer will hide (and show) with a delay from click on the apposite button.

The qcad 3.16.7 DON’T have this problem.. when you click on button immediately the layer disappear/show..

 1907 QCAD/CAMBug ReportLow having issues importing and opening dxf files  Closed
100%
Task Description

can not import dxf files

 998 QCAD/CAMBug ReportVery Low Grounded 0 recursive block references in blocks: Closed
100%
Task Description

I open anyting file dxf, the message pop-up : Grounded 0 recursive block references in blocks:

 1037 QCAD/CAMBug ReportLow great number of text editing operation leads to QCAD cr ...Closed
100%
Task Description

Hello!

When I’m trying to make a great number of text editing operation the QCAD 3.4.6 application crashes with following errors:

lman@lman:~/opt/qcad-3.4.6-linux-x86_32$ ./qcad
Debug: RCamScriptsPlugin: init
Debug: RDwgPlugin::init: trial
Debug: RDxfPlugin::init
Debug: RHelpPlugin::init
Debug: RProScriptsPlugin::init
Debug: TIMER: 56 ms - “loading add-ons”
Debug: TIMER: 672 ms - “initializing add-ons”
Debug: checking for updates...
Warning: QSslSocket: cannot resolve SSLv2_client_method
Warning: QSslSocket: cannot resolve SSLv2_server_method
Debug: no updates available
Debug: checking for updates...
Debug: no updates available
Warning: RHatchData::getPainterPaths: cannot load hatch pattern: “”
Warning: RHatchData::getPainterPaths: cannot load hatch pattern: “”
Debug: “RDwgServices::printErrorStackTrace: Handle already exists”
Warning: RDwgExporter::exportEntity: Exception occurred. Entity NOT saved:
RTextEntity(RTextBasedEntity(REntity(RObject(id: 3012, handle: “0xf33”, document: “0xa20e830”, address: “0xa9e1010”, undone: 0), type: 14, layerId: 21, blockId: 22, parentId: -1, childIds: QSet() , lineweight: -1 , linetypeId: 0 , color: RColor(ByLayer) , drawOrder: 2907 , selectionStatus: false , boundingBoxes: (RBox(RVector(1048.41, 175.238, 0) - RVector(1063.59, 177.762, 0)) ) ) , alignmentPoint: RVector(1056, 176.5, 0), position: RVector(0, 0, 0), text: “\fCalibri|b0|i1|;150”, textHeight: 1.85207, textWidth: 7, drawingDirection: 1))
Debug: “RDwgServices::printErrorStackTrace: Handle already exists”
Warning: RDwgExporter::exportEntity: Exception occurred. Entity NOT saved:
RTextEntity(RTextBasedEntity(REntity(RObject(id: 3012, handle: “0xf33”, document: “0xa20e830”, address: “0xa9e1010”, undone: 0), type: 14, layerId: 21, blockId: 22, parentId: -1, childIds: QSet() , lineweight: -1 , linetypeId: 0 , color: RColor(ByLayer) , drawOrder: 2907 , selectionStatus: false , boundingBoxes: (RBox(RVector(1048.41, 175.238, 0) - RVector(1063.59, 177.762, 0)) ) ) , alignmentPoint: RVector(1056, 176.5, 0), position: RVector(0, 0, 0), text: “\fCalibri|b0|i1|;150”, textHeight: 1.85207, textWidth: 7, drawingDirection: 1))
Debug: “RDwgServices::printErrorStackTrace: Handle already exists”
Warning: RDwgExporter::exportEntity: Exception occurred. Entity NOT saved:
RTextEntity(RTextBasedEntity(REntity(RObject(id: 3012, handle: “0xf33”, document: “0xa20e830”, address: “0xa9e1010”, undone: 0), type: 14, layerId: 21, blockId: 22, parentId: -1, childIds: QSet() , lineweight: -1 , linetypeId: 0 , color: RColor(ByLayer) , drawOrder: 2907 , selectionStatus: false , boundingBoxes: (RBox(RVector(1048.41, 175.238, 0) - RVector(1063.59, 177.762, 0)) ) ) , alignmentPoint: RVector(1056, 176.5, 0), position: RVector(0, 0, 0), text: “\fCalibri|b0|i1|;150”, textHeight: 1.85207, textWidth: 7, drawingDirection: 1))
Debug: “RDwgServices::printErrorStackTrace: Handle already exists”
Warning: RDwgExporter::exportEntity: Exception occurred. Entity NOT saved:
RTextEntity(RTextBasedEntity(REntity(RObject(id: 3012, handle: “0xf33”, document: “0xa20e830”, address: “0xa9e1010”, undone: 0), type: 14, layerId: 21, blockId: 22, parentId: -1, childIds: QSet() , lineweight: -1 , linetypeId: 0 , color: RColor(ByLayer) , drawOrder: 2907 , selectionStatus: false , boundingBoxes: (RBox(RVector(1048.41, 175.238, 0) - RVector(1063.59, 177.762, 0)) ) ) , alignmentPoint: RVector(1056, 176.5, 0), position: RVector(0, 0, 0), text: “\fCalibri|b0|i1|;150”, textHeight: 1.85207, textWidth: 7, drawingDirection: 1))
Debug: “RDwgServices::printErrorStackTrace: Handle already exists”
Warning: RDwgExporter::exportEntity: Exception occurred. Entity NOT saved:
RTextEntity(RTextBasedEntity(REntity(RObject(id: 3012, handle: “0xf33”, document: “0xa20e830”, address: “0xa9e1010”, undone: 0), type: 14, layerId: 21, blockId: 22, parentId: -1, childIds: QSet() , lineweight: -1 , linetypeId: 0 , color: RColor(ByLayer) , drawOrder: 2907 , selectionStatus: false , boundingBoxes: (RBox(RVector(1048.41, 175.238, 0) - RVector(1063.59, 177.762, 0)) ) ) , alignmentPoint: RVector(1056, 176.5, 0), position: RVector(0, 0, 0), text: “\fCalibri|b0|i1|;150”, textHeight: 1.85207, textWidth: 7, drawingDirection: 1))
Debug: “RDwgServices::printErrorStackTrace: Handle already exists”
Warning: RDwgExporter::exportEntity: Exception occurred. Entity NOT saved:
RTextEntity(RTextBasedEntity(REntity(RObject(id: 3012, handle: “0xf33”, document: “0xa20e830”, address: “0xa9e1010”, undone: 0), type: 14, layerId: 21, blockId: 22, parentId: -1, childIds: QSet() , lineweight: -1 , linetypeId: 0 , color: RColor(ByLayer) , drawOrder: 2907 , selectionStatus: false , boundingBoxes: (RBox(RVector(1048.41, 175.238, 0) - RVector(1063.59, 177.762, 0)) ) ) , alignmentPoint: RVector(1056, 176.5, 0), position: RVector(0, 0, 0), text: “\fCalibri|b0|i1|;150”, textHeight: 1.85207, textWidth: 7, drawingDirection: 1))
Could not allocate register file: 12
./qcad: line 18: 7332 Segmentation fault LD_LIBRARY_PATH=”$DIR” “$binary” -style plastique “$@”

OS: Linux Debian 7.0.1 (”uname -a” return: SMP Debian 3.13.7-1 (2014-03-25) i686 GNU/Linux)
Thanks.

 1814 QCAD/CAMBug ReportLow FS#1813 Revisited Closed
100%
Task Description

 FS#1813  Revisited. (Several bugs in QCAD/CAM 3.21.3. when generating G-code in “G-code Laser (offset).)

Hi Andrew,

After closing the bug notification I realised I didn’t add the DXF. My apologies for not attaching the DXF-file at hand.

Fortunately I am not the only one;

You can fix the missing G01 by replacing your file postprocessors/GCodeLaserOffsetMM.js with the attached updated file.

Since it was not attached, that makes two of us.

Anyway I have attached the DXF-file to be tested.

 1322 QCAD/CAMBug ReportHigh Fonts mixed up witch code tables Closed
100%
Task Description

Hi,

In ‘Application preferences, Draw, Text’ fonts can be selected.

There is a mixing up between fonts (the appearance of characters on screen) and code tables (what digital code is used for each character).

‘ISO8859-11’ is the 8 bit Thai (!) code table and not a font
‘Unicode’ is the 16 bit code table and not a font.

For downward comptability QCAD should use default font Standard (ISO3098) with code table ISO8859-1 (US-ASCII Latin-1).

 1398 QCAD/CAMBug ReportLow Duplicate zoom buttons in toolbar and menu Closed
100%
Task Description

I am seeing duplicate zoom buttons in the View toolbar, and also under the View menu. Under Application Preferences→General→Tool Settings there are also multiple entries for these, with Shortcuts and Commands highlighted in red (means there are conflicts?). This is the QCAD/CAM version on Linux 32-bit Debian “testing” release. I also tried the same version on Windows 7 64-bit and am not seeing this issue. Screen shots attached.

 1970 QCAD/CAMPerformance IssueMedium Drill Toolpath Workaround Closed
100%
Task Description

Hallo Andrew,

Fiddling with the drill-toolpath error, a solution seems to be to add the drill location as a ‘single point’ in the ‘source’ sublayer. I am using this as a Bug Work Around.

1911QCAD/CAMFeature RequestLowDrill ToolpathAssigned
0%
Task Description

Hallo Andrew

It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.

 1483 QCAD/CAMBug ReportLow Draw -> Polyline -> Create from Segments deletes a segm ...Closed
100%
1 Task Description

With the attached DXF file, select Draw → Polyline → Create from Segments
(O, G) and click on the complex polyline inside the circle (eg on
the top left arc). Apolyline is created with a few segments,
and one or more segments are deleted!

Different segments are deleted depending on which segment is clicked.

 1142 QCAD/CAMFeature RequestLow Distance Entry in "Feet and Inches" Closed
100%
1 Task Description

I use architectural units everyday in QCAD and would appreciate being able to enter feet and inches from the “command line” for convenience and accuracy.

I have been entering “calculations” to arrive at the distance values (i.e. 10*12+6.125 = 10’-6 1/8”), but this method is time consuming and prone to input error.

I would like to see Acad’s architectural distance method implemented in QCAD. This entry method would replace the “calculated” entry with (as an example): 10’6-1/8.

Command Line: Next point: 10’6-1/8
The <’> mark triggers a 12 times multiplier for the proceeding number,
the next number is the whole inches and
the ↔ is a separator that adds the fraction to the whole inches before it.

Thanks for considering this feature request. I’m certain that many QCAD users in the Architectural, Mechanical, Electrical and Construction professions wold appreciate this convenience (especially those moving past Acad).

 1967 QCAD/CAMBug ReportLow Development snapshot: Toolpath generator problem Closed
100%
Task Description

Hallo Andrew,

I had updated QCAD/CAM to 3.23.0.2 and I am confronted with a major bug in the toolpath generator.

 1512 QCAD/CAMBug ReportLow CTR command is not working Closed
100%
Task Description

1) Tool Circle WC
2) CTR circletangent2radius

This doesn’t work between two circles !
I can make a circle that touches a line and a circle.
But I can NOT make a third circle with a given radius that touches two other circles.

All the other commands in this menu are working properly, can someone help me out ?

1843QCAD/CAMBug ReportLowCreating ToolPath StallsAssigned
0%
Task Description

Hi Andrew,

Still working with and on CAM HPGL for the HP7580 pen plotter.

I have added a penplotter test drawing, that might be used for testing en callibrating plotter and pens. You may add it to the Examples-directory.

QCAD has a lot of trouble creating toolpaths and exports. Much too often it shuts itself down, or gets stalled. Why? I am not sure.

 1293 QCAD/CAMBug ReportMedium Crash when snapping to intersection points between 3d l ...Closed
100%
Task Description

I have a file that makes QCAD crash. I’ve been editing this design across different versions of QCAD over time and this is the first time I have a problem with it.

Steps to reproduce:
Open the attached file and try to add some entities or dimensions to it (you may need to create large ones since it seems to depend on the zoom factor; for example a very large ellipse). After a freeze of a few seconds QCAD will quit.

The attached file is a simplified version from which I deleted a number of entities; on the original I can’t do anything – QCAD crashes as soon as I try to create any object.

Cause: 3D lines with x1==x2, y1==y2 but z1!=z2

 1076 QCAD/CAMBug ReportHigh Crash on Mac OS X when using internal Trackpad Closed
100%
1 Task Description

Hi,

I have just updated my Mac OS from 10.9.2 to 10.9.4. QCAD 3.6.2 seems to be working normally under the newest version of Mac OS, but has developed a very specific bug which leads to reproducible crashes when a text object is edited.

Steps to minimally reproduce:
1. Open QCAD
2. Create a text object
3. Place the text object on the canvas
4. double-click the text object and edit its contents
5. click OK to accept changes
6. repeat from step 4 three or four times.

After several attempts to edit a text object, QCAD will crash with EXC_BAD_ACCESS (SIGBUS) in thread 0 (QCoreApplication).
The crash can also be triggered by moving the text object around on the canvas (instead of editing its contents).
The bug does not require anything else (no other objects on the canvas, no particular font, occurs in both new and previously saved documents).

Apart from this bug, QCAD seems to work fine on OS X 10.9. The text editing crash did not occur before the latest OS update. No other applications on my system seem to be having any problems. If this problem can be fixed, I think QCAD will be quite usable on 10.9.

See also related bugs in:
 FS#1091 

 1812 QCAD/CAMBug ReportLow Coordinate display: coordinates not updated while mouse ...Closed
100%
Task Description

The coordiantes (in the lower left corner) freeze while mouse is moving. Updates as soon as the mouse is stopped.

This slows me down considerably. I have to stop, wait (too see the coordinates), move, stop, wait, move back, stop, wait, move, stop wait... This gotta be a bug?

MacOS 10.12.6

 1089 QCAD/CAMBug ReportLow Convert polyline from segments on locked layers deletes ...Closed
100%
1 Task Description

If you select (line) segments in a visible yet locked layer and choose “convert segments to polyline” (OG), the segments are deleted, but inserting the polyline fails.
So you can easily destroy locked layers by mistake which contradicts the idea of locking layers.

 1324 QCAD/CAMSuggestionVery Low Confusing Copy / Move option Closed
100%
Task Description

Hi,

Using the Copy and Move command the [ ] Use current layer and attributes’ is confusing.

Perhaps [ ] change copy /moved set to current layers and attributes. is more suitable.

 1055 QCAD/CAMBug ReportLow code page problem Closed
100%
Task Description

After creating the labels in drawing in Russian (Cyrillic), after saving and reopening the drawing file - changing the text encoding (??????????). Need to re-type the text ... How to fix this error?

 1465 QCAD/CAMBug ReportCritical Circle is drawn as polygon Closed
100%
Task Description

Hi,

I have a circle and circle is not round.
Unit of drawing is in metres and radius is set to 2.38.
The circle displays as a polygon instead.

1901QCAD/CAMFeature RequestLowCAM Traverse ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very common Traverse Toolpath.

Example added as pdf.

Greetings

 1538 QCAD/CAMBug ReportLow CAM not use the shortest way Closed
100%
Task Description

ich habe ein Linien Gitter in QCAD erstellt und dann mit CAM Export eine NC Datei erstellt.
Im CAM Simulator sieht man dass der GCODE Postprozessor nicht den kürzesten Weg verwendet.
Anbei folgende Dateien :
CAM_TEST_LINIEN.dxf, CAM_TEST_LINIEN.nc, CAM_TEST_LINIEN.log und eine Bilddatei CAM_TEST_LINIEN.png hier kann man sehen wie die Eistellungen für die GCODE Erstellung sind.

 1914 QCAD/CAMFeature RequestLow CAM layer On/Off Closed
100%
Task Description

Hallo Andrew

If CAM layer invisible do not 3D Simulate and do not write G-code.

1902QCAD/CAMFeature RequestLowCAM G-Block ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very handy G-code Block Toolpath. This ‘toolpath’ also solves a lot of “editing requests”.

 958 QCAD/CAMBug ReportLow CAM Export: points not exported Closed
100%
Task Description

Points are not being exported.

 1817 QCAD/CAMBug ReportLow CAM Export: offset fails for contours with arcs (tolera ...Closed
100%
Task Description

After regenerate selected toolpath OR regenerate all toolpath.

The result of the output is every time different.

When pushed for example 2 or 3 times this button.

See pictures

 1813 QCAD/CAMBug ReportLow CAM Export: missing G01 Closed
100%
Task Description

Trying the EleksMaker EL01 Laser router I noticed some bugs in creating pathways, rapids, tolerance and homing.

See the attached pdf

 1820 QCAD/CAMBug ReportMedium CAM Export: exporting text entities broken Closed
100%
Task Description

Hi Andrew,

Kubuntu, QCAD/CAM 3.21.3

Font Standard. Selected as ‘single line’ font for engraving with mill or laser.

While CAM Exporting as G-code Laser (Offset) MM, or as Linux CNC, Exporting gets trapped in a loop.

In Font Standard the glyph’s ? & $ @ s S Q and 2 contains unwanted Z-movements. It seems these glyphs entities are not alligned properly; endpoint last line does not meet startpoint next line; why else the Z-movements?

Could this misallignment also traps Exporting?

 1134 QCAD/CAMBug ReportLow CAM Export: cut inner paths before outer paths broken Closed
100%
Task Description

This option seems to only work with the script debugger enabled.
See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3091

 1803 QCAD/CAMBug ReportLow CAM configuration output unit fixed in inch instead of  ...Closed
100%
1 Task Description

Ij window CAM Configuration output unit appears as inch instead of mm. All parameters are in option
when create a nc file,units are in inches not in mm. unsuable and not possible to change

 1962 QCAD/CAMBug ReportLow CAM > Drill Toolpaths: Cannot be edited / updated from  ...Closed
100%
Task Description

Hallo Andrew,

Found a bug in the drill toolpath generator.

 1946 QCAD/CAMBug ReportLow CAM > Cam Legacy Export: Cut inner paths before outer p ...Closed
100%
Task Description

The option “Cut inner paths before outer paths” is ignored, causing trouble when outer paths are cut first.

Attached is a link to the script files and gcode examples.

 1593 QCAD/CAMBug ReportLow CAM > CAM Export: ZH in header always yields default va ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=4914

1940QCAD/CAMFeature RequestLowCAM > CAM Configuration: Add program descriptionAssigned
0%
1 Task Description

Add a program description to the CAM configuration dialog and export to postprocessors as variable.

See also:
https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649

1971QCAD/CAMBug ReportLowCAD/CAM 3D SimulatorAssigned
0%
Task Description

Hallo Andrew,

Found a bug in the 3D Simulator execution

1847QCAD/CAMBug ReportLowBUG MEMORYAssigned
0%
Task Description

Hi Andrew,

Still working on creating HPGL.PLT toolpaths for the HP7580 pen plotter. QCAD has some trouble creating toolpaths. Too often it shuts itself down, or the PC gets stalled.

Recreating the same error however is possible

 1963 QCAD/CAMBug ReportLow Bug Font Standard OR Cam Config Closed
100%
Task Description

Hallo Andrew

Confronted with a bug in font Standard glyph ”s” (small S),
and a solution.

 1237 QCAD/CAMBug ReportMedium Blocks should be layer agnostic Closed
100%
Task Description

I have created a block from a selection. I have then later created more items on my CAD page using that block, then later yet, moved the objects to a new layer. I noticed that while the object has accepted being on the new layer, the color hasn’t changed to the new layer’s color. I can only get the line color to change if I go into the block itself and move the individual segments of the block to that new layer, then save the new block (which, by the way, I can’t save over the existing block?!?!)

In the sample file attached, you will see that the block item in the 3 o’clock position is in layer 0, while the rest are in “Vent Holes” layer. If you make layer 0 hidden, the one block is hidden (like it should), but the block item refuses to take on the layer’s color even though the block’s color is “By Layer”

1815QCAD/CAMFeature RequestLowAdd Laser tool optionAssigned
0%
Task Description

Hi Andrew,

Creating G-code for cnc-laser, the laser-tool can not be correctly set at all.

Attached a laser tool proposal

1913QCAD/CAMBug ReportLow3D Simulation Behaves oddAssigned
0%
Task Description

Hallo Andrew,

testing the drill toolpath I used single point markers.

In 3D simulation the tool drills the toolpath AND uses the drill as a mill.

Cam Export and generated G-code is not effected.

 1646 QCAD/CAMBug ReportMedium 3.18 has a HATCH issue Closed
100%
Task Description

If you pres the “hatch icon” then the word “hatch” appears in the command window, but. . . nothing happens.

But if you type “hatch” followed by “enter” then finally the Hatch Window pops up.

 1941 Snapshot ReleaseBug ReportLow Invisible layers displayed Closed
100%
Task Description

Snapshot release 3.23.0.2

See also:
https://qcad.org/rsforum/viewtopic.php?p=24757

 30 TestsFeature RequestHigh UiTests: update required file Closed
100%
1 Task Description

add “update required file” to the context menu shown in the result window

  1. copy the actual file to the directory “required”
  2. run the test again
  3. test result should be “passed” now
 567 TestsTaskLow rose Closed
100%
Task Description

http://www.askweddingdress.net bridesmaid dresses under $200 sensibility. Designers have even strap matte dealing with for worry of slaying the dial even a shimmer of honor. Obsessed with valuables you must no skip! Cartier parrot ornamental enamel watches http://www.askweddingdress.net wedding dresses , colossal dial having a black blue http://www.askweddingdress.net crochet beach dress , mild blue and darkish green, forming adjacent hue examine, the diploma of tiny district sensible will be the reaching contact yellow, http://www.askweddingdress.net cheap short prom dresses the whole display all of a sudden to existence, features a elegance consciousness http://www.askweddingdress.net cheap dress clothes . colours with 5 guidelines: using the union of colour, make-up rolex, http://www.askweddingdress.net formal beach wedding dresses , dim, white, grey and further intermediate colours, hue gradient colour colour cellular place, and so on. http://www.askweddingdress.net/cocktail-dresses.html vintage cocktail dresses , the emulating five colour rule makes it possible for us to match the colour of daily existence gets easy and explicit. tone colour http://www.askweddingdress.net maxi summer dresses http://www.askweddingdress.net discount bridesmaid dresses : with much more than 3 colours far more lively attain

 569 TestsTaskLow murphy Closed
100%
Task Description

later on phase http://www.askweddingdress.net bridal evening dresses . five. http://www.askweddingdress.net maternity wedding gowns If you’re currently conscious in the quantity of one’s company who will likely be attending consult about discounted space prices, or other close by appropriate accommodation for them. http://www.askweddingdress.net beach wedding dresses cheap six. http://www.askweddingdress.net informal wedding dresses cheap If a wedding ceremony package deal is getting provided question no matter whether there’s any versatility within the checklist as a way to personalize the occasion to fit your needs or if it’s a mounted deal without any alterations permitted http://www.askweddingdress.net cheap bridesmaid dresses http://www.askweddingdress.net wedding gowns bridesmaid dresses . seven. Inquire concerning the amenities offered in the venue or inside the instant region and for anyone who is preparing to benefit from any of those what fees are concerned and in the event the venue can organize these in your behalf. eight http://www.askweddingdress.net cheap plus size bridesmaid dresses http://www.askweddingdress.net/prom-dresses.html beach brides dresses . Verify the climate ailments for that time of calendar year and time of day in the venue. If you’re preparing an http://www.askweddingdress.net inexpensive bridal dresses

Showing tasks 1901 - 1950 of 1977 Page 39 of 40<<First - 36 - 37 - 38 - 39 - 40 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing