QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategory  ascTask TypeSeveritySummaryStatusProgress
 411 QCAD (main)Bug ReportLow angular dimension: prompt Closed
100%
Task Description

Strange behavior when adding a simple angular dimension between two lines.
Command:dimangular shows in Command window, but there are no prompts displayed to select first line or second line.
If I proceed and select the first , then second, the Dimension Arc Location: prompt appears and the dimension is properly added.

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1734

 2102 QCAD (main)Bug ReportLow Angular Dimension - fixed extension line option incompl ...Closed
100%
Task Description

The property editor offers for an Angular Dimension the option to make a fixed extension (yes/no) but the input field for a length is missing.

735QCAD (main)Bug ReportLowAngle dimensioningAssigned
0%
Task Description

See http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2274&view=unread#unread

 218 QCAD (main)Bug ReportLow Angle dimension shows arrows (no ticks) Closed
100%
Task Description

Angle dimension shows always arrows instead of architectural ticks.

 835 QCAD (main)Feature RequestLow And shortcut to change value in Option toolbar Closed
100%
Task Description

Pressing TAB should directly activate the corresponding text-field if a tool is activated where a numerical value can be set in the Option toolbar.
Pressing TAB again should select the next text-field in the Option toolbar.

If the last text-field in the toolbar is activated pressing TAB should deactivate the text-field. Pressing TAB one more time after this should again activate the first text-field.

741QCAD (main)Feature RequestLowAn additional Radius Measurement tool ...Assigned
0%
3 Task Description

It would be nice to have an additional Radius Measurement tool with short leads. The current Radius tool shows always the lead line to the center of the radius what is in many cases not useful.

I’m not asking for a workaround ;-)

 1684 QCAD (main)Bug ReportLow Always Check for updates Closed
100%
Task Description

“check for updates” works at boot even though unchecked in application preferences.

 1207 QCAD (main)Feature RequestLow Alternating colors for layer list, block list Closed
100%
2 Task Description

See:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3394

1337QCAD (main)Feature RequestLowAlternate units for dimensionsAssigned
0%
1 Task Description

Add support for alternate units for dimension style, for example to display units in mm and in.

2148QCAD (main)SuggestionVery LowAllow undo after breaking up self-intersecting with D2 ...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can break out segment (D2):
- removing one of the loops with the ‘remove’ option.
- leaving both without the ‘remove’ option.
Bug?
Without the ‘remove’ option it can’t be undone.

Regards
CVH

2149QCAD (main)SuggestionVery LowAllow undo after auto trim self-intersecting with AX in...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can auto trim (AX):
- The lower loop.
- The top loop.
Bug?
The action on the top loop can’t be undone.

Regards
CVH

 702 QCAD (main)Feature RequestLow Allow moving (undocking) of CAD tool bar Closed
100%
Task Description

Allow moving (undocking) of CAD tool bar (similar like command line can be undocked).

 225 QCAD (main)Feature RequestLow Allow fraction notation for number input / display Closed
100%
Task Description

Allow users to enter numeric values as fractions in the format ‘number numerator/denominator’, for example ‘7 3/4’.

Values might also be represented that way in the property editor and in other places of the user interface if desired by the user.

2147QCAD (main)SuggestionVery LowAllow breaking up self-intersecting a 2e time (at endpo...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can cut (DI) once.
Cutting the second segment results in NO cut.

Regards
CVH

 1680 QCAD (main)Bug ReportLow Alignment of text in attribute definition changes durin ...Closed
100%
Task Description

When defining block attributes, the default text alignment is center.

I changed this to align left and copied an attribute (ctrl + C) and then pasted (ctrl + V) fourteen times.

As I opened each one up with the editor to change the tag information, I noticed that every copied/pasted attribute definition had changed to align right.

I purposely set the first one back to align left and copy/pasted it a few times. Each paste had the attribute text set to align right again.

OS: Linux Mint 18.3 [64-bit]
QCAD Pro: 3.19.1.0 [64-bit]

 1158 QCAD (main)Feature RequestLow Aligned Text - to follow Arc Closed
100%
Task Description

A new tool to align text around an arc would be good.

 1167 QCAD (main)Bug ReportMedium Aligned dimensions not displayed Closed
100%
Task Description

Aligned dimensions are not displayed correctly after loading. Definition point and text position are set to NaN.

 565 QCAD (main)Feature RequestLow Align text to slanted lines Closed
100%
Task Description

I would like to get a button, which allows alignment of text to slanted lines (diagonal).
Copying of angle in line properties to text attributes is not so comfortable.

 611 QCAD (main)Feature RequestLow Align objects based on source / definition points Closed
100%
Task Description

Align objects with other objects.
- Specify 1st source point
- Specify 1st target point

Optional:
- Specify 2nd source point
- Specify 2nd target point

One pair of source / target points:
- Selection is moved

Two pairs of source / target points:
- Selection is moved and rotated

Three source / target points might be used to ‘tilt’ the object in addition to moving and rotating it.

 1114 QCAD (main)Bug ReportLow After Linux update: segfault at startup Closed
100%
Task Description

I’d try to use my qcad today, but cliking the qcad icon had no use. Opened an terminal window and executed whatever was in the icon properties, and it said segfault. Yesterday it worked. There have been an update inbetween, bash have been updated among others.

I’d have dumped uname -a to an file and enclosed it.

I’d have set the severity to critical, cause I’m not able to start qcad at all.

Please ask for any information you need.

Cincerely, Sigmund

 743 QCAD (main)Feature RequestLow After editing a Block back to the last window opening i ...Closed
100%
Task Description

Case:
Working on a Main Drawing, decide to edit a Block, start the editing process, close the editing process with “Return to Main drawing” and come back to the Main Drawing - but unfortunately to an absolute different View in the Main Drawing ...

It would be nice to come back to the same View (Zoom window) like before I started the editing procedure.

 87 QCAD (main)Bug ReportMedium Advanced Selection hits 'debugger' statement Closed
100%
Task Description

Advanced selection dialog hits a debugger statement on line 1088.

  1. Selection- Advanced Selection
  2. Change first combo box to “Any”
 746 QCAD (main)Feature RequestLow Additional projection tools: dimetric, parallel, persp ...Closed
100%
Task Description

We have already a powerful projection tool in QCAD - the Isometric tool.

It would be nice to have additional a “Dimetric tool” (Ratio 1:0.5:1, Angle 7°/42°) what is often used in the “Engineering world”.
It looks just more professional than the simple Isometric Projections and I’m pretty sure that could open a couple more Customer doors ;-)

829QCAD (main)Feature RequestLowAdditional options for the Info Tool Area ...Assigned
0%
Task Description

The Info Tool Polygonal Area is a helpful tool ... but I like to ask for additional options ;-)

Yes, the polygonal area makes absolute sense but many times you have just to check a square or rectangle area!

It would be nice and time (click) saving if we could use a “Strg Key” to limit the polygonal area to just a rectangle area.
Two mouse clicks for a rectangle area and done ;-)

In addition to that it would be nice to have the possibility to count up or down a couple areas.
E.g. I measure area 1 plus area 2 or area 1 minus area 2 ...
Maybe just with an additional keystroke like + or -

680QCAD (main)Feature RequestLowAdditional Export function for Sketchup etc. ....Assigned
0%
1 Task Description

Additional Export function for export/import into 3D Programs like Sketchup etc. (file types like .dae, .3ds, .ddf, .skp).

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2176

774QCAD (main)Feature RequestLowAdditional Button in the Blocklist menu for "Create Blo...Assigned
0%
2 Task Description

If I work in QCAD only with Toolbars (and not with the “Cad Tools” there is nowhere a Button to find for “Create Block from selection”.
If I have to create a Block based on a selection I have to work with the Menu or have to activate the Cad Tools.

But, if I look at the Blocklist menu there is a function (+) to add an empty Block. It would be nice to have this button working for both situation - empty Block or depending on a selection to “Create Block from selection”.

Or alternative an additional Button ... :-(

Anyway - in my opinion would that make the “Blocklist” complete. :-)

754QCAD (main)Bug ReportLowAdding or removing additional viewports - gives unwante...Assigned
0%
Task Description

Windows 7-64
3.0.7
When adding or removing additional viewports,an extra unnecessary window of the viewport is created.

 214 QCAD (main)Bug ReportLow Adding dimensions to circles or arcs in a block Closed
100%
Task Description

In previous versions I was able to add a diametric dimension to an arc or circle that is part of a block in the overal drawing.
When I try this now, the pogram resonds “Entity is not an arc or circle” the radius dimension gives the same error.
This is unfortunate, because typically dimensions are on another layer in the overal drawing.

1345QCAD (main)Feature RequestLowAdded option to paste a number of entities with even/eq...Assigned
0%
2 Task Description

Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&p=14209&sid=162973e4a12f58c8116299b62673a520#p14209

An additional option would be useful to paste any given entity a set number of times with even/equal gaps in between.

 118 QCAD (main)Bug ReportLow addBoundary and hatchData fails silently Closed
100%
Task Description

In scripting hatchData.addBoundary can use any shape, but only some actually produce something useful, eg. this fails silently:

"ANSI31"

Shouldn’t an exception be thrown?

991QCAD (main)Feature RequestVery LowAdd warning when overwriting custom propertyAssigned
0%
Task Description

Property Editor - Geometry - Custom - Add Custom Property

If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.

1645QCAD (main)Feature RequestLowAdd warning when opening file with 3D contentAssigned
0%
Task Description

Hi.

I’m working currently a lot with files coming from rhino. Qcad can open them properly any also most operations on them work as usual - except the selection methods.

box select from upper left to lower right works as usual.
double click to select all connected entities is broken. (only one entity is selected).
box select from lower right to upper left does not select entities touching the selection box. (nothing is selected)

on mac os nothing is selectable with single click.
on linux single click sometimes fails (nothing is selected after clicking on a line).

thanks for looking into this :)

Martin

 538 QCAD (main)Feature RequestLow add to / remove from hatch Closed
100%
Task Description

Given a hatch, it would be very useful if one could add another closed polyline to the existing hatch or remove the overlapping area from the existing hatch.

1106QCAD (main)Feature RequestLowAdd support for wipeoutsAssigned
0%
2 Task Description

Wipeout entities can be used to hide rectangular or polygonal sections of a drawing, for example to make space for a label inside a hatch.

 1264 QCAD (main)Feature RequestLow Add support for user defined polyline width Closed
100%
Task Description

Add support for PLINEWID: user defined polyline width per segment start / end.

 1070 QCAD (main)Feature RequestLow Add support for trace entities Closed
100%
Task Description

See forum thread at:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2967

661QCAD (main)Feature RequestLowAdd support for the DGN formatAssigned
0%
1 Task Description

See OpenDesign news:
“ODA consolidates support for .dgn and .dwg file formats in Teigha”

752QCAD (main)Feature RequestVery LowAdd support for the 3dConnexion Space Navigator (Pan an...Assigned
0%
3 Task Description

The 3dConnexion Space Navigator would be wonderful as a pan and zoom control. I find it extremely useful in SketchUp and when I switch from that to QCAD am always disappointed to find it doesn’t work.

3dconnexion DOT com/buy/shop.html?3dxcp=GA_GA_search_google_US_Brand

While full support for the buttons and such would be nice, just the ability to map the axis to pan and zoom would be wonderful.

1567QCAD (main)Feature RequestLowAdd support for separate windowAssigned
0%
2 Task Description

Hi, for multi-screen hosts it would be very useful to have additional windows while running the single QCad instance. Other applications like Palemoon, Evolution, Gimp are providing that already.
That would help a lot when working on multiple files and copying blocks between.

 1749 QCAD (main)Feature RequestLow Add support for non-uniform block scaling Closed
100%
1 Task Description

Same txt as on the forum.
had a copy because i had to log in 3 times to remark my own post.

Blocks are no solution either.

see pdf
[attachment=0]Block test_1.pdf[/attachment]

Antartica is put in a block as segments.
Added a rounded corner as segments and as poly.
scaled X x0.5 Y x1 origin the center of the magenta circl.

The scaled version is all over the place.
Set them to color red, no use they stay black.

The reference of the block is 2000mm to the left because I tried it out far right of my design.
The cyan circle is about 400mm in diameter.

dxf part included
[attachment=1]Block test.dxf[/attachment]

Version: 3.20.1.0 (3.20.1)
Internet: QCAD.org
Build Date: Apr 13 2018
Revision: dd51609
Qt Version: 5.5.1
Architecture: i386
Compiler: MSVC++ 10.0 (2010)

CVH

 1225 QCAD (main)Bug ReportLow add support for circles, ellipses Closed
100%
Task Description

The attached file should result in two overlapping circles, it does not, it results in a single ellipse.

The “<circle ... />” directive seems just be ignored in this case, but in other instances I have seen it result in ellipses.

And the “<ellipse ... />” directive should of course result in a circle, when rx and ry are the same.

1895QCAD (main)Feature RequestLowAdd support for block transformation matricesAssigned
0%
Task Description

Support transformations by transformation matrix for block references.

See also:
https://www.qcad.org/rsforum/posting.php?mode=reply&f=33&t=6333

 664 QCAD (main)Feature RequestLow Add some common functions and constants of the Math obj ...Closed
100%
Task Description

This would make it easier to enter formulas using sqrt, sin, cos, tan, ... without the Math. part

See also forum at:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=2118

832QCAD (main)Feature RequestLowAdd shortcut to fastly enter ortho modeAssigned
0%
Task Description

When drawing or moving objects holding down CTRL should activate ortho snapping as long as CTRL is pressed.

If ortho mode has been active before holding down CTRL should deactivate it (for the time it is beeing pressed).

 1499 QCAD (main)SuggestionLow Add script generator for Qt 5.6.2 Closed
100%
Task Description

As it says on the tin - please add script generator for Qt 5.6.2.

1601QCAD (main)Feature RequestLowAdd regex to text search & replaceAssigned
0%
Task Description

Add a more versatile way of doing a search and replace for text. Regular expressions maybe?

 1573 QCAD (main)Feature RequestLow add reference point input to copy paste Closed
100%
Task Description

It woul be really handy if there is an option to set the reference point of the copy selection.
Maybe this can be added to the clipboard widget?

 1110 QCAD (main)Feature RequestLow Add qcad.desktop Closed
100%
Task Description

There is qcad.desktop in attachment.

1156QCAD (main)Feature RequestLowAdd preference to force toolbars to be floatingAssigned
0%
Task Description

Would it be possible to have the choice to dock or not dock toolbars - in other words keep them floating, an additional option in the tool settings could be added?

1155QCAD (main)Feature RequestLowAdd preference for solid line crosshairsAssigned
0%
Task Description

Would it be possible to have the choice of either dashed or solid lines for the large cross hairs?

Showing tasks 2001 - 2050 of 2266 Page 41 of 46<<First - 39 - 40 - 41 - 42 - 43 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing