QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategory  ascTask TypeSeveritySummaryStatusProgress
1281QCAD (main)Feature RequestLowPDF ImportAssigned
0%
2 Task Description

Not too sure if this would be possible for QCAD, but an option to open/import pdfs would be good.

1285QCAD (main)Feature RequestLowProperty PainterResearching
0%
2 Task Description

Easy transfer of properties from one entity to others

1302QCAD (main)Feature RequestLowIsometric projection on the current layerAssigned
0%
2 Task Description

It would be very useful to have the same possibility for Isometric projection like the Paste tool etc.. An option which ask me to put a new Isometric projection on the current layer is right now missing. If I like to have this new Isometric Projection on a different layer I have to reselect the projection and move it to that layer. That is plain inconvenient.

1345QCAD (main)Feature RequestLowAdded option to paste a number of entities with even/eq...Assigned
0%
2 Task Description

Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&p=14209&sid=162973e4a12f58c8116299b62673a520#p14209

An additional option would be useful to paste any given entity a set number of times with even/equal gaps in between.

1356QCAD (main)Feature RequestLowOption to lengthen/Shorten from both ends of entity at ...Assigned
0%
2 Task Description

It would be helpful to have the added option to lengthen/Shorten from both ends of entity at the same time.

1362QCAD (main)Feature RequestLownew layer tool: Toggle visibility allAssigned
0%
2 Task Description

Hi,

I use a lot of “temp” layer to keep my drawing organized during a design session. Ad the end of the day (or week or month ...) I need to get rid of this “garbage” but unfortunately there is no easy way to delete all this layer in one go.
Most of the time those layer are invisible. The “important layer” are visible. If I could toggle all layer from visible in invisible in one go with a switch like “Toggle visible layer all” and then use “Select all” / delete / Purge unused layer I’m able do get rid of this stuff with just a few clicks.

The same tool would help to improve the workflow in the case that I just have to switch between all visible / invisible layer for testing / double checking / cleaning or what ever. Currently I have to toggle every single layer to get this done and if I work with many layer I need to have a perfect working memory (or a piece of paper with many notes!) to be able to restore the same desired working order.

And I’m confident - there are many more useful scenarios for a tool like this one ... ;-)

pics: “Toggle visibility all” with one click:

1364QCAD (main)Feature RequestLowNew Tool -'Run Parallel with'Assigned
0%
2 Task Description

New Tool request:

When drawing a line it would be good to have a tool/option to ‘run parallel with’.

For example start to draw a line and choose ‘run parallel with’, select appropriate line to draw parallel with!

1567QCAD (main)Feature RequestLowAdd support for separate windowAssigned
0%
2 Task Description

Hi, for multi-screen hosts it would be very useful to have additional windows while running the single QCad instance. Other applications like Palemoon, Evolution, Gimp are providing that already.
That would help a lot when working on multiple files and copying blocks between.

1627QCAD (main)Feature RequestLowrevision cloudAssigned
0%
2 Task Description

how do i draw revision cloud in Qcad pro
or when do you will implemented it

 1644 QCAD (main)Bug ReportLow Crash on hide all layers button / mixed layers of diffe ...Closed
100%
2 Task Description

Hi!

it occorred to me now several times, that I have been working on 2 or more files simultaneously when suddenly on some operations layers from one file showed up in the other file. nothing was pasted when it happened just many files open, or few files with many layers in them. (about 100 layers, but sometimes also only 10 layers)
Today I disabled a single layer in one dxf (A) which caused all layers of the other dxf (B) to show up in the layer list (and the layers that should show up were all gone).

I knew this already from 2 more occurances and tried the best to undo all my changes in (A) before “emergency saving” (A). I closed one of the two dxf files (A), leaving one open (B). Everthing seemed pretty normal again. Then pressing the “hide all layers” button just crashed qcad without any message. That crash on “hide all layers” happened twice today). I can’t reproduce the crash right now, but will add details here when I find something. As far as I remember the bug occured already in qcad 3.17, but I’m now on 3.18.1

thanks :)
Martin

 1695 QCAD (main)Bug ReportLow Context menu: editing tools not working in paper space Closed
100%
2 Task Description

Tools not working from context menu in paper space.

 1792 QCAD (main)Bug ReportLow Dimension > Angular: transformations broken Closed
100%
2 Task Description

(I originally described the problem in the forum: https://qcad.org/rsforum/viewtopic.php?f=33&t=5721 )
(The problem was also reproduced by user “Husky” so it not installation specific.)

I have a model where one of the details is as shown in attachment 1

However, when I create a viewport and display the part in the the layout the angular measurement is another. See attachment 2.

In the model it should be noted that the part displayed is a detail copied with a different scale as to Zoom in on a detail in order to put dimensions on it. It was created by copying a part of the model and pasting it back in the model but with 3x zoom.

I have also included the full .dxf file in the hope that it helps you both reproduce and fix this issue

Note: The same problem seems to also produce “ghostlines” in other viewports in the layout which is not present in the model. Removing the angular measurement also removed the ghostline. You can observe the issue by looking at layout2 and you can see a line (dimension layer) going from top right corner of the viewport towards the lower left. This line is not present in the model and appears to be some strange extension to the angular dimension the detail that is just to the top right in the model.

System:
Macbook Pro 15”, OS X 10.13.6

(Can also be reproduced in Linux version)

QCad version:

Version: 3.21.2.0 (3.21.2)
Build Date: Jul 9 2018
Revision: f9cea14
Qt Version: 5.10.0
Architecture: x86_64
Compiler: Clang 8.0.0

1886QCAD (main)Feature RequestLowSupport advanced tolerance settings for dimensionsAssigned
0%
2 Task Description

Add support for
- tolerance display (dimtol)
- upper limit (dimtp)
- lower limit (dimtm)
- tolerance precision (dimtdec)
- tolerance text size factor (dimtfac)
- tolerance suppress zeros, etc.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6269

 1891 QCAD (main)Bug ReportLow File > Import: import fails Closed
100%
2 Task Description

I’m not able to import any dxf or dwg.

2018QCAD (main)Feature RequestLowLayer visibility setting per view/view-portAssigned
0%
2 Task Description

In a medium complex drawing it’s often too much details to have all layers in a drawing visible at once. Also, it is of great importance to be able to have a single model to avoid duplication of work and risk inconsistency.

So i would like to create a number of views where each view has selected layers visible (that makes sense for the purpose of the view) and then assign the views to different layout blocks (using view-ports) in paper-space to be able to setup printing of several views on the same page/PDF

This also means that view-ports would have to be aware of what view they are displaying (if any besides the standard-view).
This will then make it possible for printouts of different views with selected layers visible (different for each view and view-port) and still have only one model. Today this is not possible.

As it is today the only limited workaround is to set the layers you want to display, print/PDF of that viewport on separate page, and then change it for the next page, and so on. The big drawback is that you cannot have two different views/view-ports on the same page with different layers visible. Also, for large drawing it is painful to have to do a lot of manual setup for each rendering of the complete drawing.

 388 QCAD (main)Feature RequestLow More options for Polygons ... Closed
100%
3 Task Description

Possibility to draw Polygons with a given dimension for across flats (not only corners).

 408 QCAD (main)Feature RequestLow Script Macro recorder Closed
100%
3 Task Description

Having practically no experience in scripting, a recorder that one could activate to memorize repetitive tasks (ie: inserting several layers with different attributes when starting a new drawing)would a useful tool to help get a start on scripting.

704QCAD (main)Feature RequestLowOld Hatch FunctionAssigned
0%
3 Task Description

It would be nice to implement the old hatch function as a tile function in parallel with the newer more industry standard hatch function. A tile function that would allow overlap +/- would be even better, and a great productivity boost, almost like an array within a set of bounds.

Thanks, Bob

734QCAD (main)Feature RequestLowPossibility to distribute a selection equal to each oth...Assigned
0%
3 Task Description

It would be nice to have an extra option for the Align tool what provides the possibility to an equal distribution of a selection ...

Screenshot:
First row: Befor / Second row: after

752QCAD (main)Feature RequestVery LowAdd support for the 3dConnexion Space Navigator (Pan an...Assigned
0%
3 Task Description

The 3dConnexion Space Navigator would be wonderful as a pan and zoom control. I find it extremely useful in SketchUp and when I switch from that to QCAD am always disappointed to find it doesn’t work.

3dconnexion DOT com/buy/shop.html?3dxcp=GA_GA_search_google_US_Brand

While full support for the buttons and such would be nice, just the ability to map the axis to pan and zoom would be wonderful.

 761 QCAD (main)Feature RequestLow Colour Indicators for Layer List Closed
100%
3 Task Description

Layers are great for organizing a project. For construction lines alone I sometimes use 3 and more layers. And then there are more layers for each part I design. Each with its own colour.

And when a project gets bigger I start wishing for a quick overview in the layer list to the colours I use on them. So I wish for colour indicators on the layer list to quickly identify the membership of a line to a layer.

I have a small image attached to make you see, what I mean.

766QCAD (main)Feature RequestLowLayer List: Add "Lock All Layers"Assigned
0%
3 Task Description

To improve useability/efficiency I would like to propose the following changes/additions to the layer list:

1) Combining the show and hide button into one button.

Clicking once will hide all layers, clicking again will show them all again.

2) A “lock/unlock” button.

Clicking once will lock all layers, clicking again will unlock them all again.

Regarding the icons I suggest that instead of show both the black and grey version of the eye/lock, you could switch between them depending on the state the switch-button is in. Also the mouse-over-text could/should change with the state.

 889 QCAD (main)Feature RequestLow Filter the current selection to only include entities o ...Closed
100%
3 Task Description

The property editor should do,
if I change
Selection: All(xx)
by Filtering by Entity Type
Selection: Circle(xx)
only the selected enteties(in this case the circles) should be selected, so we will be able to copy, delete ... directly

Der Eigenschaften Editor sollte wenn die
Auswahl: Alle(xxx) auf z.B.
Auswahl: Kreise (xx) geändert wird
auch nur diese Selektierung in der Zeichnung auswählen um direct kopieren, löschen ... zu können

952QCAD (main)Feature RequestLowDimensions: manually control arrow positionAssigned
0%
3 Task Description

See drawing: I can’t seem to be able to manually change to the “To” variants – that is, override the decision of the label/arrow placement engine.

The circle in the attachment is a borderline example of when even just in this form I would more like it on the outside. If the drawing is crowded in that area, it would be even more useful to have it the other way around.

 1031 QCAD (main)Feature RequestLow Remember last layer active, when restating existing dra ...Closed
100%
3 Task Description

An option to remember the last active layer in an exisisting drawing when reopening.

Please see topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&p=9687&sid=7204a32dd33d5aa65ad5f979915cb7b2#p9687

1126QCAD (main)Feature RequestLowSuggestion for Dimension Location settingAssigned
0%
3 Task Description

Please seet topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3124

1171QCAD (main)Feature RequestLowSelecting the right entity when entities are close / on...Assigned
0%
3 Task Description

Please see last few posts here:

http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3227&p=11777#p11777

1206QCAD (main)Feature RequestLowLink drawings with each other to update layers, blocksAssigned
0%
3 Task Description

See:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3410

 1208 QCAD (main)Feature RequestLow Remember folded layer state Closed
100%
3 Task Description

See:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3395

1218QCAD (main)Feature RequestLowEdit blocks in the drawing instead of isolatedAssigned
0%
3 Task Description

see:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3466

 1273 QCAD (main)Feature RequestLow Layer > Purge Unused Layers: keep locked layers Closed
100%
3 Task Description

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=3735

1470QCAD (main)Feature RequestLowDouble line tool requestAssigned
0%
3 Task Description

I would love to have a ‘Double Line’ tool in QCAD.

For me this would be such a time saver when drawing out building floor plans in QCAD.

1628QCAD (main)Feature RequestLowMove / Copy and snap tangentialAssigned
0%
3 Task Description

Please see:

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5024#p18601

 431 QCAD (main)Feature RequestLow Construction lines Closed
100%
4 Task Description

Construction lines (’infinite’ lines).

 760 QCAD (main)Feature RequestLow Hierarchical Layers Closed
100%
4 Task Description

Please, dear Feature Fairy, I wish for hierarchical layers. That would make organizing my projects a little bit easier.

Let me show you, what I mean: (see Attachment)

895QCAD (main)Feature RequestLowArea calculation based on existing entitiesAssigned
0%
4 Task Description

Use case:

  • Start tool
  • Choose one entity of the contour
  • If contour is closed, area of closed contour is calculated an printed in the command line history
  • Configuration parameters: segment length for arc interpolation
1165QCAD (main)Feature RequestLowNew Create Spiral ToolAssigned
0%
4 Task Description

A new tool to create Spirals would be great to have, with an option to restrict the decline to achieve to draw either Logarithmic or Linear styles.

Please see related topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3236

 1435 QCAD (main)Feature RequestLow Default Template for new Drawing Closed
100%
4 Task Description

It would be great if the user could choose a default template for new drawings.

There exists already a “File → New from Template” feature, where I can choose a template, but in most cases I want my new drawings to be based on my default template.
It would be very convenient if there is an option to set the default template and use it for the “File → New” function.

1488QCAD (main)Feature RequestLowDimension text positionAssigned
0%
4 Task Description

This one is a really important one for me, as currently I am doing a lot of dimension and annotation drawings.
I would like to request an option to be added to the dimension settings for both drawing and application settings to be able to choose whether the dimension text is to the right or left side or over the top or underneath the dimension line.
This would help tremendously when a lot of dimensions are needed!

Regards

Clive

1721QCAD (main)Feature RequestLowInsert table toolAssigned
0%
4 Task Description

Hi Andrew,

I’m not sure whether this has been added or suggested already. It would be great to have a built in QCAD table tool for producing cutting lists or bill of materials etc. A dedicated table tool would be a real boost to QCAD Pro ;)

Many thanks

Clive

 647 QCAD (main)Feature RequestLow Customize line type Closed
100%
5 Task Description

I would like to get a submenu in properties to define own line types, i.e. one dash and three points or line + block.

Edit: Add support for custom line types defined in DXF / DWG files.

763QCAD (main)Feature RequestLowHatching with just one clickAssigned
0%
5 Task Description

My task: To hatch an area.

Right now, if I want to fill an area with a hatch pattern, I have to select all the enclosing objects (lines, arcs) and then I can select the hatch tool. That can be under some circumstances a tedious task.
To illustrate this, I created a simple example (see Attachment 1: Hatching.png).

Step 1: Create a rectangle.
Step 2: Draw four vertical lines.
Step 3: Select the four lines surrounding the first area. –> Problem! The horizontal lines are too long.
Step 4: Divide the long horizontal lines of the rectangle where the vertical lines touch. Now the lines surrounding the three areas can be selected.
Step 5: Hatch the selection. Done.

Just for fun try recreating my second example (see Attachment 2: Hatching2.png)

Therefore I would like to suggest a far more simple approach.

Step 1: Select the Hatch Tool.
Step 2: Click inside the area you would like to be hatched. Done.

Of course that would mean that the hatch style is already pre-defined and can be changed later, if needed.

In this way productivity can be increased by ... [fill in you own estimate] ... times.

Example 2 would need only 13 clicks to hatch all the areas (including the hatch tool button).

778QCAD (main)Feature RequestLowRemove multiple layersAssigned
0%
5 Task Description

It would be a nice feature to be able to select multiple layers to remove them all at once.

972QCAD (main)Feature RequestLowDistribute equally option ...Assigned
0%
5 Task Description

It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.

1224QCAD (main)Feature RequestLowRevision cloudsLikely to be implemented
0%
5 Task Description

Add support to draw revision clouds or convert polylines, ellipses, circles to revision clouds.

1428QCAD (main)Feature RequestLowSnap middle of the minimum distance between two entity'...Assigned
0%
5 Task Description

Hi,

from time to time I need to place a circle etc precisely between two entity’s - what is a lot of construction work to get it correct. With the new “Info tool “Distance Entity to Entity” we have already the base for a new snap tool which could help to get rid of the time consuming construction process in cases like this. I would appreciate to get a new snap tool which is able to figure out the shortest distance between to entity’s and then will snap to the middle of it.

Pic 1: Given situation
Pic 2: Result after using this new snap tool

Would it make also cense to have a second new snap tool which works opposite for the furthermost distance between two entity’s?

1723QCAD (main)Feature RequestLowDetecting overlapping line / arc segmentsAssigned
0%
5 Task Description

Add a tool to detect overlapping segments or lines and arcs.
Similar like the “overkill” command in other CAD systems.

 335 QCAD (main)Feature RequestLow Drawing preferences: Change font of dimensions Closed
100%
7 Task Description

Configure font used for dimensions.

694QCAD (main)Feature RequestLowUser coordinate systems (UCS)Assigned
0%
8 Task Description

UCS support.

 950 QCAD (main)Feature RequestLow Copy properties from... / Copy attributes from... Closed
100%
8 Task Description

See discussion at:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2614

Showing tasks 1901 - 1950 of 2079 Page 39 of 42<<First - 37 - 38 - 39 - 40 - 41 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing