QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategory  ascTask TypeSeveritySummaryStatusProgress
2063QCAD (main)Performance IssueLowBad performance while zooming inside layout block with ...Assigned
1 Task Description

Zooming in and out is lagging to the point of unusable. This is happening in a layout block with the cursor pointing inside geometry with hatches. When the cursor is pointing outside the geometry zooming works as expected.
The attached file has a very simplified testcase that shows this problem almost in the same way as a more complex drawing with multiple layers and hatches.

edit: I also attached the more complex drawing because it is a bit unclear to me where the lagging stops. Outside the viewport or outside the paper.

I just noticed the selection box has the same problem!

 137 QCAD (main)RefactoringLow SVG Export precision Closed
Task Description

In files exported with the (even PG) exporter I sometimes see values like these: 334.99999999999994 or 570.0000000000001 and very often 12 digits of precision.

To safe on file size, I suggest, that QCAD rounds values on SVG export to eg. three places. When viewed in an ordinary web browser, that will result in a precision of 1 inch / 96dpi / 1000 = 0.00026mm, not? Ends should still meet.

 138 QCAD (main)RefactoringLow SVG Export entity properties "By Layer" and "By Block" Closed
Task Description

If I understand correctly, SVG export uses svg groups to keep QCAD block entities. This in itself is very useful. There is no way to correctly keep layer information, as QCAD blocks can contain elements on different layers, while SVG only knows about groups. That is a deficiency of SVG.

To save on file size, there was some potential to get rid of ever repeating same attributes on entities, eg: style=”stroke:#000000;stroke-width:0.25;stroke-dasharray:2.16,1.08”

To optimize “By Block” is easy: just set the attribute on the SVG group, and omit on below entities styled “By Block”.

To optimize “By Layer” is a little more involved, but might be solved by using css:
- Create a class by the name of the Layer
- add the class attribute to elements styled “By Layer”

Then only individually styled entities would get a style attribute, and filesize of SVG could be halved in most cases.

This just an idea :) Having written this, I now realize, that QCAD can style weight, pattern, color each extra, so the optimazition could only be applied to entities, where everything is “By Layer” or “By Block”. But that should be the case most of the time.

 146 QCAD (main)RefactoringLow cloning entities: optional ID cloning Closed
Task Description

add parameter to REntity::clone to allow cloning without cloning object ID.

 610 QCAD (main)RefactoringLow replace QMdiArea with QTabBar and QWidgetStack Closed
Task Description

QMdiChild widgets in an QMdiArea receive repaint and mouse events even if they are not active which slows down the user interface when having multiple MDI children open.

Long term, QMdiArea might have to be replaced with something else.

 1056 QCAD (main)RefactoringVery Low Dead and wrong code in RSPlatform.cpp Closed
Task Description

I am considering pushing the following diff:

--- a/src/core/RSPlatform.cpp
+++ b/src/core/RSPlatform.cpp
@@ -205,25 +205,6 @@ int RS::getCpuCores() {
     cores = sysinfo.dwNumberOfProcessors;
 #elif defined(Q_OS_UNIX)
     cores = sysconf( _SC_NPROCESSORS_ONLN );
-#elif defined (Q_OS_MAC) || defined (Q_OS_BSD4) || [...]
-    nt mib[4];
-    size_t len;
-    /* set the mib for hw.ncpu */
-    mib[0] = CTL_HW;
-    mib[1] = HW_AVAILCPU; // alternatively, try HW_NCPU;
-    /* get the number of CPUs from the system */
-    sysctl(mib, 2, &cores, &len, NULL, 0);
-    if (cores < 1) {
-        mib[1] = HW_NCPU;
-        sysctl( mib, 2, &cores, &len, NULL, 0 );
-    }
-#elif defined(Q_OS_HPUX)
-    cores = mpctl(MPC_GETNUMSPUS, NULL, NULL);
-#elif defined(Q_OS_IRIX)
-    cores = sysconf( _SC_NPROC_ONLN );

(truncated list to manage size)

I see that most of this was put in there as a kind of a note-to-self originally, however _SC_NPROCESSORS_ONLN is implemented by every realistically possible targets anyway, so for all practical purposes, this is dead weight.

A couple of questions remain, though:

  • #ifdef Q_OS_WIN32 should probably be Q_OS_WIN, so as to include win64 as well.
  • Assuming the real purpose for this function is to determine how many parts a particular task is to be split into in the future, if and when QCAD gets the need to split expensive tasks among multiple CPUS, “core” probably shouldn’t be static - CPUs are hot-pluggable today, and while one probably doesn’t do that on a laptop, it’s not unfeasible in, say, a VDI environment.


 26 QCAD (main)ReleaseLow Release Tasks Closed
Task Description


  • developer menu
  • tests scripts

Adjust Version


  • “About” dialog (automatic)
  • reference manual: support/doc/manual/about.txt / about_de.txt
  • scripts/splashscreen.png
  • scripts/Tools/LibraryBrowser/splashscreen.png
  • src/core/RVersion.h
  • library browser DB file name in LibraryBrowser.js, LibraryBrowser.getDbFile()


  • Linux Deployment (support/deployment/linux)
    • deploy.sh: change RUN_FILE, TARGZ_NAME
    • setup.sh: change SETUP_INSTALLPATH
  • Mac OS X:
    • deploy.sh: DMGNAME
    • src/run/Info.plist
    • src/run/InfoLibraryBrowser.plist
    • src/run/InfoTrial.plist
  • Windows:
    • qcad_installer.nsi
    • qcad_trial_installer.nsi

Don't forget

  • file “readme.txt”
    • adjust “Known limitations”
  • update QCAD Application Framework API
  • svn tag revision
  • add version to bug tracker

Check List

  • run automatic tests
  • designer plugins qwebkit (libqwebview.so)
  • text with CAD font
  • hatches
  • insert image
  • user interface translations
  • help (Qt Assistant client)
    • help translations
  • library browser
    • drag-n-drop insert from library browser
  • help - contents
  • help - check for updates
  • templates
  • initial launch (without ini file)
  • printing
  • PDF generation
  • SVG export
  • loading / saving files
  • Help - Show Readme (can file readme.txt be found?)
  • Qt libraries not in debug mode, QCAD binary does not link against debug Qt libraries
  • command line tools


  • Mac OS X Snow Leopard & Lion (10.6 & 10.7)
  • Mac OS X Leopard x86 (10.5)
  • Mac OS X Leopard ppc (10.5)
  • Linux 32bit
  • Windows 32bit

Plus maybe later:

  • Mac OS X Tiger (10.4)
  • Linux 64bit
  • Windows 64bit
 1328 QCAD (main)ReleaseLow Windows 64bit install dir Closed
Task Description

I only noticed today (perhaps they were available earlier?) that there are 64 bit binaries for windows; I suppose these are true 64 bit.

Yet, the installer prompts me to put them into “Programs (x86)”, where all the 32bit software lives, I guess - this seems to be a pure convention though, the application runs just fine.

Maybe the reason is, that the 32bit version was installed before; Maybe it should change? Maybe it should stay, so that there are not two?

1323QCAD (main)SuggestionLowImprove command line support in QCADAssigned
Task Description


As a typical command line draftsman (still using acad10 for dos, since microsoft doesn’t supoort Win NT anymore),
I noticed a severe lack on command line acces in QCAD.

For example I find the icon and pixel selecting methods within qcad very confusing and rude.

With the normal cad Select command I can select exactly what en how I want it.

I intend not to be rude, but I find my drawing screen littered all over with all kind of very specialist menu’s,
tools and options. Sorry, I just want to make a drawing at the natural intuitive way, as with a pencil.
So I use command line Commands, such as Move, Copy, Change, Select, a.s.o.
For a ‘Command scripting’ user (-batching is a different tool!-),
it seems to me logical these basic commands should be accessable.

1368QCAD (main)SuggestionLowContext Menu - suggestionsAssigned
1 Task Description

I love using the context menu, speeding up my workflow indeed.

I would like to suggest that we have the added option to show only icons if desired and also that maybe an option to save and show commonly used tools!

Maybe the context menu could be configurable to show two columns, one for the normal last used tools and the othjer one for the user saved tools?

What do you think?

 1375 QCAD (main)SuggestionVery Low Install in hidden folder Closed
Task Description

After each update, I add a dot before the ~user/opt folder (and in the program launcher) created by QCAD to unclutter my file manager’s appearance. Would be easy, I think, to make the installer put the program directly in ~user/.opt, and nobody would miss that folder while browsing through daily used files.

And what about installing the program as root, so all users of a computer could use it without personal installs, and only personal setting files created by users would be kept in ~user/.opt/qcam.


1469QCAD (main)SuggestionLowCartouche automatiqueAssigned
1 Task Description

Would not it be possible to create a kind of template for printing?
We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).

Original suggestion:


Ne serait il pas possible de créer une sorte de template lors de l’impression ?
On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).

 1490 QCAD (main)SuggestionLow Text Edit Control <ESC> maps to <cancel>. If anything i ...Closed
Task Description

For all the Linux VI editor geeks, can you disable the <ESC> function in the text edit mode. <ESC> maps to <cancel>. If anything it should map to <ok>. Which creates no harm as it can be later undone. I have accidentally lost edits countless times due to an unbreakable habit.

 1499 QCAD (main)SuggestionLow Add script generator for Qt 5.6.2 Closed
Task Description

As it says on the tin - please add script generator for Qt 5.6.2.

 1516 QCAD (main)SuggestionLow QT style on Linux Closed
Task Description

The startup script still forces a QT-style; Getting bored of that one, qcad runs fine with the system default style - probably that was a qt4 thing, that can be removed, so it blends better with the DE?

18c18 /opt/qcad/qcad
< LD_LIBRARY_PATH=”$DIR” “$binary” -style plastique “[email protected]” —

LD_LIBRARY_PATH=”$DIR” “$binary” “[email protected]
1526QCAD (main)SuggestionLowExporting block attributes to CSVAssigned
1 Task Description

Two useful commands make it necessary to

1-”delete all the history of the command lines without terminating QCad” ; and

2-”export attributes to the CSV file as exported to the Blocks List”

 1527 QCAD (main)SuggestionLow "Zeichnungseinheit konvertieren" translation missing .. ...Closed
Task Description

... for the Option bar.

 1534 QCAD (main)SuggestionLow Headless Styling Closed
Task Description

Since the launcher batch no longer requests “-style plastique” QT wants to apply the native style of the desktop environment. This fails on a headless system (or where the current user has no graphical shell to connect to) with the message “Gtk-WARNING **: cannot open display: “. Fortunately, QT provides a workaround in addtion to the new “platform=offscreen” flag.

In the tools that set -no-gui, beforehand export these variables into the environment

export QT_QPA_PLATFORM=offscreen
export DISPLAY=""

PS: QT-offscreen will not find fonts; unfortunately the workaround only allows for a single directory to search them (I need helvetica):

export QT_QPA_FONTDIR="/usr/local/share/fonts/type1"

Maybe that should get reported upstream, so that like LD_LIBRARY_PATH several directories could be specified.

 1607 QCAD (main)SuggestionVery Low Indent 'Spline Segments:' in explode preferences Closed
1 Task Description

 FS#1604  was issued because of non-intuitive hierarchy of the preferences for the Explode function.
The task comment recieved explains the funcionallity in details not found elsewhere.

Indentation of the phrase ‘Spline Segments:’ suggest hierarchy.
Graying out the drop down box for the number of spline segments establish hierarchy.

1678QCAD (main)SuggestionLowProperty Editor dialogAssigned
Task Description

The line for “General properties”, “Layer” the line is too narrow,
so you do not see the layer name when the Property Editor is pinned to the side.
(see Forum - Suggestions and Feedback):

 1728 QCAD (main)SuggestionLow Script bindings for Qt 5.9.4 Closed
Task Description

Please add script bindings for Qt 5.9.4, thank you.

1740QCAD (main)SuggestionLowMake unprintable layers also hidden in print previewAssigned
Task Description

Make unprintable layers also hidden in print preview

1754QCAD (main)SuggestionLowWhen Selecting multiple blocks that contain the same at...Assigned
Task Description

When selecting multiple blocks that contain the same attribute names, attribute properties appear with the values of the last selected block instead of “various”. I do not know if this is a “bug” or developer option, but “various” would be better in my opinion.

 1759 QCAD (main)SuggestionVery Low Modify // .... selection of entities on locked layer al ...Closed
Task Description

Without any selection.
Entities on a locked layer can be selected after choosing:

Asumed wrong
- Modify DI
- Modify
- Modify D3
- Modify

- Modify RM
- Modify
- Modify RN Less severe
- Modify
- Modify OH
- Modify


1789QCAD (main)SuggestionLowApplication Preferences / General / Performance :0Assigned
1 Task Description

Hi Andrew,

we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.

I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.

Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.

Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.

Just my two cents. ;)

1851QCAD (main)SuggestionLowLateral surface of a coneAssigned
Task Description

Module mise à plat d’un cone


Serait il possible dans un futur d’ajouter un module de mise en plan de cone.

Une petite fenêtre sur lequel on donne par exemple :
1- Ø haut
2- angle de coupe du haut
3- hauteur du cône
4- Ø bas
5- angle du bas
6- épaisseur matière

Ce qui permettrai de sortir une mise en plan a plat de la forme

 1910 QCAD (main)SuggestionLow Please take a look at 1898 again Closed
Task Description

Please take a look at 1898 again. There is a problem.

1915QCAD (main)SuggestionLowViewport does not rotate view-port when changed in pape...Assigned
Task Description

To reproduce

1. Select a new view-port in model-space
2. Select the appropriate paper-space
3. When the paper space opens change the angle of the viewport.


The object in the viewport changes but the viewport itself remains unchanged


That both the view-port and the object changes angle as the angle is updated


If you abort the placement (but keep the angle) and go back to model-space and then redo the operation the view-port is rotated along the angle. It seems that the viewport only picks up the initial angle once the paper-space is open and ignores any changes thereafter


1. Select the view-port per normal in model-space
2. Open the paper-space and set the wanted angle but do not place the view-port in paper space
3. Abort the placement on paper-space and redo the whole operation

Once the paper space is opened again the view-port will have the chosen angle

 1925 QCAD (main)SuggestionLow Poly Ref Points manipulation that generates null-segmen ...Closed
Task Description

Win7pro 32bit Wininstaller Qcadpro 3.23.0

With a polyline.

Select the poly.
Pick any reference point of a vertex.
Place it on any of its neighboring vertex reference points.

A null-segment is created.
The placement can not be undone by re-picking the reference point.
Can be Undone/Redone.
The action can result from editing the vertex coordinates.
When exploding null-entities are created.

This action should delete:
- if the target is next: the picked vertex. (incl. start or end-1)
- if the target is prior: the targetted vertex. (incl. start or end-1)
- if the target is and next and prior: both the prior and the picked vertex.

As the user intentionally places any vertex reference points on:
- any excluding its neighbors:
→ the intented nature is ‘Self-Touching’, ‘Self-Crossing’ or ‘Trace-Back’.
- any of its neighbors:
→ the intention is to delete the segment(s).


2072QCAD (main)SuggestionLowInserted and flipped block mirrors text and dimAssigned
Task Description

Text and/or DIM used in blocks will be mirrored if inserted with a vertical/horizontal flip option.

Text/DIM which was successfully used in previos QCAD versions are now mirrored if they are loaded in the current version.

Version 3.23.0 doesn’t shows this behavior.


 2075 QCAD (main)SuggestionLow Draw order bug after insert bit map Closed
Task Description

First post, so please excuse if I missed some forum rules etc...

I insert bit maps and trace over them to create DXF files for laser cutting burnout templates. If the edge of the bit map is coincident with a line I have drawn, it is not possible to select the line for offsetting, trimming etc. This is regardless of the draw order or handle number. It seems to happen most if the edge of the image and line are coincident with the X or Y origin. I also use fairly fat lines to make it easy to see. My default line width is 1mm. Not sure if that affects selection or not, but fatter lines don’t help the issue at hand.

Steps to reproduce...
insert bitmap at 0,0
draw horizontal and vertical lines starting at 0,0. (my lines are usually longer than the edges of the bitmap.
try to select one of the lines for offsetting. (Select the line in the area of the bitmap. There is no problem selecting the line where it extends past the edge of the bitmap.)

It does not matter if I insert the bitmap first and then draw lines, or draw lines first, insert bitmap and then change the draw order so the lines are on top. It is also not consistent on which axis is affected. It is usually both X & Y, but sometimes just one or the other.

Workaround is select the bitmap, then move it by 0.001 in any direction. Now the edges are no longer coincident and you can select your lines. The alternate workaround is to insert the image on another layer and then turn that layer off when you need to select a line on the edge of the bitmap.

2115QCAD (main)SuggestionLowMove toolbars with negative positions to 0 positions Assigned
Task Description

As it can be seen in the attached image, QCAD toolbars may dock to a position slightly outside the visible area of the screen. After having docked there, I have not been able to move them any more. Their current position is just in the middle of the screen.

The position of the toolbars remains the same after the deinstallation of QCAD, shutting down, restarting the computer and reinstalling QCAD. I kindly ask for help.

Kind regards

 2120 QCAD (main)SuggestionLow SH - Restrictions for orientation are not working Closed
Task Description

launch LI,
launch for the first point SH, set to 5 distance,
snap to a point,
activate Auto snap, (which would work with SD for EH and EV but not for Alt)
try to restrict orientation for second point with ALT, EH, EV - it won’t work in this scenario ... :-(

Edit: Playing around ... could it be that RZ is not propperly set within those tools?

2126QCAD (main)SuggestionVery LowPE casts on individual hatch segmentsAssigned
Task Description

QCADpro / win7pro 32 bit / 4GB / 1e generation i7 2.6Ghz / HDD GeForce GT 520

The method PE casts the clipboard on individual hatch segments.
Hatches should be considered as a single complex entity not allowing certain actions.

Discovered while:

Not that it matters: In doing so the scaling is off too.


 78 QCAD (main)TaskLow Linux deployment: tar.gz Closed
Task Description

if possible, extend create_makeself script to create a tar.gz in addition to the executable installer, so we have both in the end.

 83 QCAD (main)TaskLow Part Library - Find Files / Generate Files Closed
Task Description

Create and extend part library.

Find Existing Files

Find files under a suitable license (e.g. creative commons) for inclusion into the QCAD part library:

  • DXF / DWG files
  • SVG files which we could convert to DXF with a command line converter or InkScape if possible.
    • DXF files produced from SVG / with InkScape contain a lot of polylines with small line segments which interpolate arcs and circles.
      • A ‘Convert Interpolating Line Segments’ tool could be used to convert line segments into arcs, ellipse arcs and circles.
        1. for c in 0...number of nodes: create arc with v[c], v[c+1], v[c+2]
        2. check if v[c+i] is also on arc for c+i<number of nodes
        3. if n nodes have been found which are all on arc and all segments have almost the same length and are relatively small compared to the whole drawing, convert them to arc
      • A ‘Simplify Polyline’ tool could be used to remove nodes that don’t add a lot of information (almost straight connected line segments).

Parameterized Items

  • Parameterized items use XDATA to let the script behind know which entities need to be changed in which way.
  • The user can choose from all supported parameters shown in a table.
  • The user can choose from options:
    • Create dimensioning
    • Create auxiliary lines
    • Create center line
    • Scaling
    • Sectional drawing
    • Hatching space
  • Disadvantage compared to automatically generated items:
    • It is not possible to add an item with it’s parameters to favorites, e.g. some specific screw often used in a drawing. To make that possible, the parameters has to be saved, too.


[mostly old] Generate Items Automatically

  • Research possibilities to turn data sheets into library parts, for example attached data sheet.
    • Ideas:
      • use an XML file for data entry, use an ECMAScript to generate symbols based on the XML file.
      • Instead of writing a complete ECMAScript file to generate the geometry, it might be possible to simply draw one item and attach XDATA to the entities for information on how the item can be scaled, stretched, etc.
        • E.g. a line might have the XDATA “transform” with value “translate(length-5, 0)” which would mean that the line has to be moved ‘length-5’ to the right, where ‘length’ is the current value of the ‘length’ parameter in the XML data file. Similarly, there could be functions like “moveEndpoint”, “moveStartpoint” or even “rotate”, “mirror”, etc.
      • XML file could contain all data and refer to a .js file that is used to generate the specific drawing. E.g.:
<!-- XML document defines a name template to use for the generated parts: -->
	<!-- Attributes to use for the name template -->
	<!-- For each type of the specific part, we define some parameters that 
		are identical for that type (here M3): -->
		<!-- For each of these elements, a DXF file is generated. This DXF file 
			is generated with file name "DIN_912_M3_L22.dxf" and parameters d="3" D="5.5" 
			s="2.5" k="3" b="18" L="22": -->
 114 QCAD (main)TaskLow Create QCAD Cheat Sheet Closed
Task Description

Cheat Sheet which lists all QCAD tools with icon, key code and explanation

Possibly two versions for Windows / Linux and Mac

 129 QCAD (main)TaskLow Image entity Closed
Task Description

Implement RImageEntity and related classes.


Image in block

Image insertion tool:

  • change size in options tool bar: keep ratio

Image file look up:

  • absolute path
  • relative path (?)
  • same path as drawing file

Image display:

  • draft: border
  • normal: image
  • preview: border (or image for small file)

Move, rotate, ...


Selection with click inside image

Move reference points to scale

 131 QCAD (main)TaskLow Create block Closed
Task Description

Create block from selection

 132 QCAD (main)TaskLow Snap restrictions Closed
Task Description

Implement snap restrictions

 133 QCAD (main)TaskLow Set relative zero point Closed
Task Description

Set relative zero point tool.

 134 QCAD (main)TaskLow Lock relative zero Closed
Task Description

Lock relative zero tool

 135 QCAD (main)TaskLow Lock layers Closed
Task Description

Implement layer locking

 136 QCAD (main)TaskLow Isometric projection Closed
Task Description

Implement isometric projection tool

 227 QCAD (main)TaskLow Library browser as separate tool Closed
Task Description

Split up library browser as separate, QCAD independent tool.


- Potential interaction with other products / release as separate product?


- Remove DB dependency from QCAD 3.
- start-up splash screen
- avoid drop in browser widget
- app name
- menu (exit, about, preferences)
- preference dialog
- fix app icon
- window title
- library browser as single app
- raise window to the top on start


- Make QCAD 3 more reliable to start.
- Make QCAD 3 faster to start (if library browser not used).
- Reduce memory usage if library browser not open.

Interface with QCAD 3

- Launch Library browser from menu or tool button.

QCAD launches library browser for example as:
./QCAD -autostart scripts/Tools/LibraryBrowser/LibraryBrowser.js

- Insertion of library parts with drag and drop (like so far). No change should be required for this (?).

 321 QCAD (main)TaskLow Add license to ECMAScript files Closed
Task Description

Add license header for all ECMAScript files.

 347 QCAD (main)TaskLow Investigate QPainter warnings when running QCAD in -no- ...Closed
Task Description

Invastiagte QPainter warnings when running QCAD in -no-gui mode

See forum:

 928 QCAD (main)TaskLow CXF font editing Closed
1 Task Description

Port CXF font editor to QCAD 3.
- Load CXF fonts (load glyphs into blocks)
- Save back to CXF format

 1113 QCAD (main)TaskLow Updating spatialindex? Closed
Task Description

Prompted by d9beb4 - this is actually fixed in current upstream sources (by killing bzero in favor of memset, which is the right thing to do).

It might worth considering to update the spatialindex component.

 1119 QCAD (main)TaskLow Improve presentation of linetype names in combobox Closed
1 Task Description

The Linetype Names in the pull-down menu for Layer are hardly readable - it seams to me that the description is used twice (in different ways) in each row.
Till 3.6.4 the Information was short and clear.

Showing tasks 1951 - 2000 of 2128 Page 40 of 43<<First - 38 - 39 - 40 - 41 - 42 - Last >>

Available keyboard shortcuts


Task Details

Task Editing