QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategory  ascTask TypeSeveritySummaryStatusProgress
 184 QCAD (main)Bug ReportMedium SIGABRT RExporter::exportEntity() at RExporter.cpp:524 Closed
100%
Task Description
  • while creating a dimension
  • drawing unit: inches
  • not reproduceable
/home/martin/workspace/rsframework/debug/qcad-bin [24765]	
	Thread [10] 24804 (Suspended : Container)	
		__kernel_vsyscall() at 0xffffe424	
		poll() at 0xb4f9703e	
		g_poll() at 0xb4b010bb	
		0xb4af0c46	
		g_main_context_iteration() at 0xb4af0fce	
		QEventDispatcherGlib::processEvents() at 0xb54a2741	
		QEventLoop::processEvents() at 0xb547131d	
		QEventLoop::exec() at 0xb54715aa	
		QThread::exec() at 0xb535e8ed	
		0xb544da4b	
		<...more frames...>	
	Thread [7] 24773 (Suspended : Container)	
	Thread [6] 24772 (Suspended : Container)	
	Thread [5] 24771 (Suspended : Container)	
	Thread [3] 24769 (Suspended : Container)	
	Thread [2] 24768 (Suspended : Container)	
	Thread [1] 24765 (Suspended : Signal : SIGABRT:Aborted)	
		__kernel_vsyscall() at 0xffffe424	
		raise() at 0xb4ef98df	
		abort() at 0xb4efb220	
		RMainWindow::messageHandler() at RMainWindow.cpp:63 0x8f1cb62	
		qt_message_output() at 0xb5356f65	
		0xb53571ab	
		qFatal() at 0xb53572c9	
		qt_assert() at 0xb5357355	
		RExporter::exportEntity() at RExporter.cpp:524 0x8eff312	
		RExporter::exportEntity() at RExporter.cpp:578 0x8eff500	
		RExporter::exportEntities() at RExporter.cpp:642 0x8eff6d5	
		RGraphicsScene::regenerate() at RGraphicsScene.cpp:111 0x8f07c6b	
		RDocumentInterface::regenerateScenes() at RDocumentInterface.cpp:534 0x8ef0979	
		RDocumentInterface::objectChangeEvent() at RDocumentInterface.cpp:2,053 0x8ef4986	
		RDocumentInterface::applyOperation() at RDocumentInterface.cpp:1,911 0x8ef445e	
		REcmaDocumentInterface::applyOperation() at REcmaDocumentInterface.cpp:5,708 0x88ecfae	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xa4b828e1	
		0xb6a423e3	
		0xb6af06e0	
		0xb6ac201e	
		QScriptValue::call() at 0xb6bd2e67	
		REcmaShellActionAdapter::coordinateEvent() at REcmaShellActionAdapter.cpp:1,279 0x8c5e96a	
		RDocumentInterface::handleClickEvent() at RDocumentInterface.cpp:729 0x8ef12c3	
		RDocumentInterface::mouseReleaseEvent() at RDocumentInterface.cpp:652 0x8ef0eac	
		RGraphicsScene::handleMouseReleaseEvent() at RGraphicsScene.cpp:174 0x8f07fa7	
		RGraphicsView::handleMouseReleaseEvent() at RGraphicsView.cpp:468 0x8f0a9d7	
		RGraphicsViewQt::mouseReleaseEvent() at RGraphicsViewQt.cpp:253 0x8e068fe	
		QWidget::event() at 0xb58da629	
		RGraphicsViewQt::event() at RGraphicsViewQt.cpp:104 0x8e062c0	
		QApplicationPrivate::notify_helper() at 0xb5871d7c	
		QApplication::notify() at 0xb58772c4	
		QCoreApplication::notifyInternal() at 0xb547215b	
		QApplicationPrivate::sendMouseEvent() at 0xb5875152	
		0xb59066b5	
		QApplication::x11ProcessEvent() at 0xb5905d26	
		0xb5932f04	
		g_main_context_dispatch() at 0xb4af0509	
		0xb4af0d10	
		g_main_context_iteration() at 0xb4af0fce	
		QEventDispatcherGlib::processEvents() at 0xb54a2741	
		0xb5932a55	
		QEventLoop::processEvents() at 0xb547131d	
		QEventLoop::exec() at 0xb54715aa	
		QCoreApplication::exec() at 0xb5473701	
		qtscript_QCoreApplication_static_call() at 0xb08dc4b7	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xb100d9e9	
		0xb6a44262	
		0xb6a445f7	
		0xb6bb0f92	
		QScriptEngine::evaluate() at 0xb6bba46f	
		RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:743 0x8797fbc	
		RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:739 0x8797ea0	
		RScriptHandler::init() at RScriptHandler.cpp:31 0x8f3a8ca	
		main() at main.cpp:176 0x8792007	
 185 QCAD (main)Bug ReportLow text editing Closed
100%
Task Description
  1. create text, font Arial
  2. edit text
  3. change only bold / italic flag in text dialog
  4. no change in edited text
 186 QCAD (main)Bug ReportMedium QCAD not working on Ubuntu 11.04 x64 Closed
100%
Task Description

Qcad Beta in Ubuntu 11.04 x64

'/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/assistant' 
/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/assistant: error while loading shared libraries: libQtHelp.so.4: cannot open shared object file: No such file or directory
[email protected]:~$ '/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/qcad-trial' 
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so

/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so


(<unknown>:4849): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Loading IM context type 'ibus' failed

(<unknown>:4849): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Loading IM context type 'ibus' failed
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so

/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so


(<unknown>:4849): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Loading IM context type 'ibus' failed
application directory:  "/home/gabriel/opt/qcad-3.0.0-beta-trial-linux" 
working path:  "/home/gabriel/opt/qcad-3.0.0-beta-trial-linux" 
library path:  "/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/plugins" 
Debug:    Init script plugins... 
Debug:    TIMER:  26623 ms -  "loading and initializing plugins" 
Warning:  RScriptHandlerEcma::doScript: engine busy: aborting evaluation of script: 

 "scripts/File/NewFile/NewFile.js" 

 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    Creating storage... 
Debug:    Creating spatial index... 
Debug:    Creating document... 
Debug:    Creating MDI child... 
Debug:    Initialize Viewports... 
Debug:    Init graphics view... 
Debug:    Init scrollbars... 
Debug:    Init rulers... 
Debug:    Init idle and default actions... 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Debug:    lock failed:  "EACTION FINISH: scripts/Snap/Auto/Auto.js" 
Debug:    locker:  "NEW" 
Debug:    lock failed:  "EACTION RESUME: scripts/Idle/Reset/Reset.js" 
Debug:    locker:  "NEW" 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Debug:    lock failed:  "EACTION FINISH: scripts/Snap/RestrictOff/RestrictOff.js" 
Debug:    locker:  "NEW" 
Debug:    lock failed:  "EACTION RESUME: scripts/Idle/Reset/Reset.js" 
Debug:    locker:  "NEW" 
Debug:    Show MDI child... 
Debug:    lock failed:  "RMainWindowQt::subWindowActivated" 
Debug:    locker:  "NEW" 
Debug:    Init event handler... 
Debug:    updateScenes... 
Debug:    updateGuiActions... 
Debug:    notifyListenersSlot... 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Debug:    setActiveSubwindow... 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
/usr/lib/gio/modules/libgiobamf.so: clase ELF errónea: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgiobamf.so
/usr/lib/gio/modules/libgvfsdbus.so: clase ELF errónea: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so

(<unknown>:4849): Gtk-WARNING **: Error loading theme icon 'window-close' for stock: No se ha podido cargar el módulo de carga de imágenes: /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed

** (<unknown>:4849): CRITICAL **: murrine_style_draw_render_icon: assertion `base_pixbuf != NULL' failed

(<unknown>:4849): Gtk-CRITICAL **: IA__gtk_style_render_icon: assertion `pixbuf != NULL' failed

(<unknown>:4849): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_pixels: assertion `GDK_IS_PIXBUF (pixbuf)' failed

(<unknown>:4849): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_width: assertion `GDK_IS_PIXBUF (pixbuf)' failed

(<unknown>:4849): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_height: assertion `GDK_IS_PIXBUF (pixbuf)' failed
Segmentation fault
 187 QCAD (main)Bug ReportLow Error Linetypes and Hatch angle from drawing Qcad2 Prof ...Closed
100%
Task Description

Hi, I open a drawing with Qcad2 and:
- The hatch angle is changed
- The linetype is continuos for all lines
- The “white paper” in print view not show

I add a screenshot

Greetings

 190 QCAD (main)Bug ReportLow SVG PG export dimension labels alignment Closed
100%
Task Description

Dimension labels in QCAD are (always?) centered on the dimension line, while in exported SVGs the text starts from the center and extends into the writing direction. This can trivially be fixed by adding the attribute “text-anchor:middle” to the respective SVG “text” nodes.

 191 QCAD (main)Bug ReportLow SVG PG export text vertical and horizontal alignment Closed
100%
Task Description

QCAD offers horizontal and vertical alignment choices for text. This is not carried over to PG exported SVGs. Currently QCAD sets the “dy” attribute on text nodes in a way, such that any text in SVG will look like the QCAD vertical alignment was set to “Top” and the horizontal one to “Left”.

Naively one can just omit the “dy” attribute and in SVG this will look like the QCAD vertical alignment was set to “bottom”. At least for single line texts that should be good.

The horizontal alignments can be recreated in SVG with the “text-anchor” attribute for text nodes. The values “start”, “middle” and “end” correspond to the QCAD “left”, “center” and “right” choices.

 192 QCAD (main)Bug ReportLow SVG PG export stroke width should not scale Closed
100%
Task Description

When PG exporting to SVG, stroke-widths are scaled with the drawing, while they should not.

 193 QCAD (main)Bug ReportLow SVG PG export scale hatches Closed
100%
Task Description

The SVG PG exporter does not scale hatches.

 194 QCAD (main)Bug ReportLow SVG PG export scale text Closed
100%
Task Description

Text scaling in PG SVG exporter is missing just two small additions: These attributes are not taken care of by now:

font-size, dy

Just use the current value times scale: eg 2.5 * 0.1 to have a scale of 1:10. Looks good here.

 195 QCAD (main)Bug ReportLow SVG PG export scale points Closed
100%
Task Description

Points are not scaled when PG exported to SVG:

Points as crosses are created eg. like this:

d=m 2.5,3 1,0 M 3,2.5 l 0,1

and in SVG look fine like that (scale 1/10):

d=m 2.95,3 0.1,0 M 3,2.95 3,3.05

stroke-width should be left unchanged.

 196 QCAD (main)Bug ReportLow Templates Closed
100%
Task Description

Edit–>Application Preferences–>Load/Save–>Templates click add Crash!!!!

Reported in TP1 (debian squeeze)

I now use Linuxmint 11


[email protected]:~$ uname -a
Linux xzn 2.6.38-11-generic #48-Ubuntu SMP Fri Jul 29 19:05:14 UTC 2011 i686 i686 i386 GNU/Linux

 198 QCAD (main)Bug ReportLow SVG PG export dimensions Closed
100%
Task Description

SVG PG exporter, scaled or unscaled, currently only exports the labels of dimensions. Missing are

ticks, arrows, and lines of the dimension.

It will not be as simple as inkscape does it, wrap it all in a <def>.

 199 QCAD (main)Bug ReportMedium Print preview scaling distorts model view Closed
100%
Task Description

- Draw a rectangle, say 100 x 100 (I use mm unit, but does it matter?)
1
- Turn on print preview
- Turn off print preview
- OK
2
- Turn on print preview
- Set scale 1/10
- Lines are thicker now, this is good
- Turn off print previw
- Lines stay thick in model view, should that be so?
3
- Set layer 0 to use dash as line-style
- Turn on print preview
- Looks OK
- Set scale 1/10
- Dashes hardly visible, looks almost like a continuous line

In the end of 2,3 a way to reset line width display in model view is to cancel scaling in print preview, ie. turn on print preview, set scale 1:1. I suppose this is a regression since TP1: model view always is unscaled.

The line-width scaling is quite accurate now: Draw two lines 10 mm apart. Set line-width 0.5mm. Set scale 1:20 and the lines exactly touch.

 200 QCAD (main)Bug ReportLow Patterned lines uncorrectly scaled in print preview Closed
100%
Task Description

In print preview lines are correctly scaled to stay the same width when printed, ie 0.25 or so mm thick. Print preview shows that very good.

But the round line-caps mess up the display, as in small scale the line-caps start to meet and make the line look like a continous one.

Print preview should not only correct line weight but also line patterns, so that the distance between dashes increase by scale.

 202 QCAD (main)Bug ReportLow SVG PG export font colors Closed
100%
Task Description

White text gets exported as white text, while it should be exported as black text. Just like it is with lines. Attached patch makes text rendering use the conversion function that is already in the code base.

 203 QCAD (main)Bug ReportLow Save font styles bold and italic Closed
100%
Task Description

Font styles “bold” and “italic” are not saved to file.

According to http://docs.autodesk.com/ACD/2011/DEU/filesDXF/WS1a9193826455f5ff18cb41610ec0a2e719-7a4d.htm it is saved in dxf as group code 1071 and according to http://www.autodesk.com/techpubs/autocad/dxf/dxf2002.pdf page 20 its type is “Extended data 32-bit signed long”.

 204 QCAD (main)Bug ReportLow SVG PG export font styles Closed
100%
Task Description

Patch to PG export font styles “bold” and “italic” to SVG. (This only works when a file with the right style is loaded into QCAD, as QCAD will yank such style information upon saving.)

 209 QCAD (main)Bug ReportHigh QCAD launch crashes Closed
100%
Task Description

After installing the QCAD version 3 BETA, at QCAD launch, I get a window that pops up, QTScript Debugger, see attached screen shot.

After a while everything goes down and no QCAD apps is running.

What can help this ?

 210 QCAD (main)Bug ReportLow Pasting a block form the library browser changes drawin ...Closed
100%
Task Description

I noticed like this:

in a block pasted from the library, text would be under differently coloured lines, although it should be above them, and this does not look nice.

Drawing order inside of a block should not be changed by a paste operation, not?

 211 QCAD (main)Bug ReportLow Empty drawing tab gets title from newly opened document Closed
100%
Task Description

Starting QCAD opens new empty drawing (Untitled 1).

After I open existing drawing, “Untitled 1” tab title changes to the name of newly opened drawing.

 212 QCAD (main)Bug ReportLow application preferences Closed
100%
Task Description

command preferences (application preferences) work one time if close, then need to close and open qcad for new preferences.

 214 QCAD (main)Bug ReportLow Adding dimensions to circles or arcs in a block Closed
100%
Task Description

In previous versions I was able to add a diametric dimension to an arc or circle that is part of a block in the overal drawing.
When I try this now, the pogram resonds “Entity is not an arc or circle” the radius dimension gives the same error.
This is unfortunate, because typically dimensions are on another layer in the overal drawing.

 215 QCAD (main)Bug ReportLow Space to revert to keyboard entry Closed
100%
Task Description

Space bar does not change to keyboard input for coordinates, etc.

 216 QCAD (main)Bug ReportMedium CTRL + Left Mouse doesn't work Closed
100%
Task Description

CTRL + left mouse button does not add to current selection

 217 QCAD (main)Bug ReportLow SVG export ignores exportPoints setting Closed
100%
Task Description

Both SvgExporters ignore the exportPoints setting. Attached patch takes care of that. To be applied from within the “scripts” directory.

Nitpicking in File/SvgExport/SvgExport.js, var properties is meant to be a plain Object instead of an Array, isn’t it?

 218 QCAD (main)Bug ReportLow Angle dimension shows arrows (no ticks) Closed
100%
Task Description

Angle dimension shows always arrows instead of architectural ticks.

 219 QCAD (main)Bug ReportLow Library browser not in View - Toolbars menu Closed
100%
Task Description

Library browser not in View - Toolbars menu

 220 QCAD (main)Bug ReportLow Error when loading a file Closed
100%
Task Description

Hi,

When I try opening a file with blank caracters in directory name, Beta 3 reports a bug (see pictures attached). Error occurs only if I click on file icon. But no error occurs if I open directly in QCAD.

Regards,

 222 QCAD (main)Bug ReportCritical MacOS X Lion Installation problem Closed
100%
Task Description

Installation problem.
After uneventful installation on MacOS X Lion 10.7.1 on a MacBook Pro Core I5 the QCAD will not launch by clicking into the app. When trying to launch the application by the command line I received an error message regarding the “plugin” folder, as follows:

al:MacOS everaldo$ ./QCAD
application directory: “/Applications/QCAD.app/Contents/MacOS”
working path: “/Applications/QCAD.app/Contents/Resources”
plugins folder does not exist

Renaming the folder from “/Applications/QCAD.app/Contents/PlugIns” to “Applications/QCAD.app/Contents/plugins” solved the problem.

Regards.

Everaldo de N. Peixoto
[email protected]

 223 QCAD (main)Bug ReportLow No return to main window after opening a block window. Closed
100%
Task Description

I have a drawing imported from 2.2. I have tried to edit a block and the block window duly opens. However I can’t get back to my main drawing window. In the earlier version I could select a main drawing window. The window menu did not offer any other window to select. The window shown in the list was the name of the main file and clicking on it did nothing. The Tile and Cascade options worked but showed no other windows.

 224 QCAD (main)Bug ReportHigh Printing not working under Windows Closed
100%
Task Description

Printing does nothing.
Sometimes crashes on quite (possibly related to printing).
PDF export works (as a workaround).

 226 QCAD (main)Bug ReportCritical Editing and saving a file Closed
100%
Task Description

Hello,
Just started with the program. I opened drawing made under 2.2 pro to modify it. Everything works ok (deleting entities) but as soon as I start removing unused layers, I get an error message when trying to save my work (photo attached). The previouly saved file becomes an empty file...Working on Win7x64, logged as admin.
JJ

 229 QCAD (main)Bug ReportLow No grid display toggle Closed
100%
Task Description

No way to toggle the grid view on or off?

 234 QCAD (main)Bug ReportHigh File completely erased/corrupted; then duplicates upon  ...Closed
100%
Task Description

I have been working with a file in 2.2 which I then opened with beta 3. All seemed to be well for a couple of days. Today the application closed itself. When I restarted and tried to load the file it came up duplicated. One tab showed nothing, the other showed my drawing with blue lines and the tab headers (file name) were identical except that the ‘blue line’ tab had an asterisk after the file name indicating that the file had been changed. Highlighting a ‘blue line’ element showed the properties with colour white.

I’m running 64bit Ubuntu 11.04. ‘Blue line’ file attached. Any quick way to change the blue lines to default white?

 237 QCAD (main)Bug ReportMedium Image remains displayed when it's layer is changed to h ...Closed
100%
Task Description

Ubuntu 11.04 64 bit.
Image imported into drawing in layer ‘pictures’.
Layer ‘pictures’ hidden.

QCAD 3 beta displays the image when zoomed out so that the whole drawing is visible within the working window.
It ‘disappears’ when the zoom is taken in such that the drawing exceeds the window display.

When the layer ‘pictures’ is visible the image behaves as expected, i.e. always visible.

 238 QCAD (main)Bug ReportLow Files given on command line don't open Closed
100%
Task Description

Files given on command line don’t open if paths are relative (CWD problem)

 239 QCAD (main)Bug ReportMedium part library unit conversion Closed
100%
Task Description
  • insert part in inch into mm drawing
  • block scale correct, but block reference also scaled
 240 QCAD (main)Bug ReportLow Tool 'Show only active layer' not in layer toolbar Closed
100%
Task Description

Tool ‘Show only active layer’ not in layer toolbar.

 241 QCAD (main)Bug ReportLow Autosave 10min saves every 1min Closed
100%
Task Description

Autosave 10min saves every 1min

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1604

 242 QCAD (main)Bug ReportLow Dimension: no feet displayed in architectural format Closed
100%
Task Description

Dimension: no feet displayed in architectural format

(e.g. 79 19/32 instead 72 7 19/32)

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1605

 243 QCAD (main)Bug ReportLow Dimension preferences: precision not saved Closed
100%
Task Description

Dimension preferences: precision not saved between preference dialog sessions.

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1605

 245 QCAD (main)Bug ReportLow select contour with no line brings up debugger Closed
100%
Task Description

Select → Contour (T, C) and click into empty space, will cause an exception, REntityPointer being a null pointer (0×0) and not false, undefined or something like that.

 246 QCAD (main)Bug ReportLow Foot drawing unit: value display Closed
100%
Task Description

Various issues for grid info, property editor, dimensions, etc.

 248 QCAD (main)Bug ReportLow Drawing in print preview Closed
100%
Task Description

One can draw in print preview. If one does, QCAD starts acting confused, the model view gets restored with a fullbright white background.

Maybe best is to just disable all drawing and measuring in print preview?

 250 QCAD (main)Bug ReportLow Scrolling in Property Editor changes List Box elements Closed
100%
Task Description

Bug or Performance Issue? I’m not sure but it regularly trips me up and is counter intuitive.

In the right hand window generally if you scroll in the pane the list of items moves up and down as expected. E.g. Layer List and Block List.

However in Property Editor there are drop down list boxes and scrolling in the Property Editor pane dangerously scrolls elements within any drop down list that the mouse pointer happens to alight upon. This can lead to inadvertently changing properties.

I propose that a drop down list should not scroll until the list is opened. Scrolling in the Property Editor pane should scroll the Property Editor contents.

 251 QCAD (main)Bug ReportMedium wrong tab names Closed
100%
Task Description

After I open the second file, the tab name of the first file is changed to the name of second file. After that I see two tabs with the same names but with two different files.

 252 QCAD (main)Bug ReportMedium Displayed line thickness too thick. Closed
100%
Task Description

This manifestation happened after I had loaded an existing drawing, made modifications, then used print preview and adjusted the scale to fit the paper.

The file was closed. Upon reopening lines designated as .25mm were unusually thick such that two lines 2mm apart appeared as one solid line. Placing the cursor over the line showed it was comprised of two lines.

Changing the properties of a line to make it thinner did not help with one exception and that was to set the line thickness to default, when the two lines became visible.

 253 QCAD (main)Bug ReportHigh coordinate input Closed
100%
Task Description

Coordinate input broken.

 254 QCAD (main)Bug ReportLow Snap to ellipse / ellipse intersections Closed
100%
Task Description

Snap to ellipse / ellipse intersections

 257 QCAD (main)Bug ReportLow autosnap to reference point Closed
100%
1 Task Description

Autosnap does not recognize the center of a circle as a reference point.

JJ

Showing tasks 201 - 250 of 2225 Page 5 of 45<<First - 3 - 4 - 5 - 6 - 7 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing