QCAD Bugtracker

Multiline attributes can contain linefeeds and formatting like MTEXT.

Add a tool to duplicate a layout block with contents.

Hello,

I’ve quite often the task to transfer changes from one set of drawings to another (similar) set.
My ideal setup would be to open one set in one window and the other set in another window.
Both windows would be arranged side-by-side (larger monitor).
Changes would be copy-pasted from one set to the other.

From #2352 I’ve learned that there is a command-line option to achieve this.

Unfortunately it’s not possible to copy-paste between these instances.

And yes, it’s important to do this in two windows to see both versions at the same time.
So, tabs are not the answer.

It’s also ok if i could detach a tab from one instance and arrange it aside of the main window (like the property editor).
Than all data transfers would happen inside the same instance.

Best regards,
Klaus

... inclusive trim option

I’m already able to use the Circle tool “2 Tangents and radius” to accomplish this task but it is a lot of break out etc. action needed to clean the shape afterward.

See:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=10379

Could you add “plain text paste” as ctrl-shift-V
Why? Because sometimes the clipboard comes in with rich text formatting that’s anti-helpful.
The workaround is to paste into a plain text editor, or the console, then recopy and repaste into qCad.

Either way the ctrl-shift-V shortcut is useful for those trained on other software but:
one could also argue that qCad should NEVER take rich text, and rather only accept the plain text with both CTRL-V and CTRL-SHIFT-V.

— CHV says

Agreed, having encountered it numerous times while documenting with text snippets from elsewhere. :roll:
Even copying Info measurements from the Command Line are Rich Text.

The best place to file a feature request is QCAD Bugtracker:
https://www.ribbonsoft.com/bugtracker/ You may need a different account there or make a new one.

May I remark that Ctrl-Shift-V is already in use for Paste along Entity (PE)
But not when the Text Editor Widget has the focus and dialog Widgets are always modal on a Win OS system. :wink:
Still, I’ll vote for it in any way.:P

Regards,
CVH

implement

it would be ideal to be able to have the option to autohide the side panel to increase the visible drawing space when working on a small screen.

The modify stretch tool wants first and second corner, start and end point, then starts afresh. When I turn on restrict horizontally eg to align two points between start and end, the restriction sticks and I have to call restrict none, to be able to perform the next iteration, set the first corner then.

So, in the quest for a comfortable user interface, it was nice, if the modify stretch first/second corners parameter setting was not affected by current restrict/ortho etc. settings. Actually, that does not make any sense at all anyways, does it, a rectangle is defined by two degrees of freedom, isnt it?

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1867

Apparently this was possible in QCAD 2 due to the default behavior of Qt.

Hi,

in QCAD3 RC2 points were printed as crosses, in QCAD3 RC4 they are printed as (very little) points. I think this isn’t a bug but a feature.

It would be nice if one could change this behaviour / select the symbol of points.

Best regards - Stefan

This is a double post of http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5870#5870 as suggested there.

I would like to get a shortkey like ‘+’ to rotate text at 90° clockwise.

Nach einigen Überraschungen ....

Es ist möglich Layer in nicht eingefügten oder unsichtbar geschalteten Library Items unbemerkt zu löschen ....

Fallbeispiel 1:
Ich arbeite an einer Zeichnung die u.a. den Layer “Gelbe Linie” benutzt.
Ich füge ein Library Item ein was auch einen Layer “Gelbe Linie” hat.
Ich lösche - aus welchen Gründen auch immer - in der Zeichnung das Library Item weil ich es erst später wieder verwenden will.
In der Blocklist ist es natürlich immer noch verfügbar.
In der Zeichnung lösche ich den Layer “Gelbe Linie” da ich diesen nicht brauche brauche - habe aber natürlich nicht im Kopf welche Layer in meinen Blocks verwendet wurden.
Nach einiger Zeit will ich den Block (den aus der Library) wieder einfügen - dieser ist nun aber unbrauchbar da der Inhalt welcher auf dem Layer “gelbe Linie” war fehlt.
Das Library Item neu aus Library laden um das bereits existierende zu reparieren scheitert da das erste nicht überschrieben werden kann. Ich muss den ersten Block löschen um den neuen benutzen zu können.

Fallbeispiel 2:
Da das selbe (löschen der Layer) auch passieren kann bei unsichtbar geschalteten Blöcken kann es dazu führen das ich zig bereits positionierte Blöcke zerstöre und neu platzieren muss um meine Zeichnung zu reparieren.

Fallbeispiel 3:
Ich sehe in meiner Zeichnung einen Layer “Gelbe Linie”. Weiß nicht was das ist - schalte alle Layer unsichtbar außer “Gelbe Linie”. Klicke auf “Auto Zoom” um zu sehen was den auf “Gelbe Linie” ist. Finde nichts = also leer! Lösche Layer “Gelbe Linie”. Der Layer wurde aber von einem im Moment nicht verwendeten Library Block verwendet. Es gibt keinen Hinweis das ich damit ein Library Item zerstören könnte ....

Lange Rede kurzer Sinn: Wäre es machbar/sinnvoll Layer in Blöcken nur löschen zu können wenn ich mich im Edit Modus der Blöcke befinde?

Since this is not supported by Qt anymore, this would likely have to be implemented from scratch.

Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.

Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.

Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.

Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel

To have a ‘clean up ' tool to:

- eradicate duplicate lines
- eradicate stray points
- remove empty layers
- remove unused blocks

Perhaps with an initial dialog which allows the user to choose what they want to clean up.

Input:

1. X axis min/max or choose line (?) or center (for polar functions)
2. function: y = f(x) / polar function: r = f(a)

Output:

1. function plot

See:
http://www.youtube.com/watch?v=27bCgg3zLVA

Customer wishes that stacked text used as subscript is rendered differently (i.e. increased text size, lower position for subscript).
This may also apply to superscripts.

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2180

Task: If I like to make a hatch and the contour isn’t closed I get a Grey circle Info where the contour isn’t closed. Nice!

But ..... I have this Info only for ONE not proper connection and only for the moment when the mouse pointer is over the Hatch Tool Symbol.

If I have to zoom into the Problem - I will lose the Info where the problem is

To get the “Problem Info” back I have to select it again - but for that I have to zoom out ...............

It would be nice to have this “Problem Info” longer in the drawing - maybe until I solved all problems.

And it would be nice to have ALL Infos for not connected lines at the same time. It is not really helpful to repeat this function 20times if I have 20 connection problems ... ;)

To re-introduce Tile and Cascade window options like as before in QCAD 2.2.2.

Hi,
this is a usability feature request:

If you want to move an object relatively to any point (e.g. by entering @x;y in commandline) it does’nt make sense to enter a starting reference point. Of course this is possible by clicking to any location on the screen. But it’s difficult to change between mouse and keyboard so often.

It should be possible to enter a “don’t care” or “any” reference point by pressing a keyboard shortcut (e.g. enter like in AutoCAD).

Thx

Slow loading of drawing with huge number of block inserts (more than 10000).

See http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2274&view=unread#unread

XP/32

Go to:
Text → Special Characters → Others → “Character Map” pops up.
Adjust Zoom to 100% = display problem (not enough space for the single character.

Leader Arrow size and the Architectural tick size are controlled by one and the same value.

It would be nice to get the possibility to adjust them independently from each other ...

Most of our drawings have a Data sheet, parts List, cutting list, description etc etc on a pdf, world or excel file.

It would be nice to have a link possibility directly in QCAD to those files what will be saved with the drawing.
Like the bitmap function without displaying the files in the drawing ...

- Switch isometric grid off
- Switch isometric grid on using drawing preferences
- Tool buttons don’t reflect correct status

If I work in QCAD only with Toolbars (and not with the “Cad Tools” there is nowhere a Button to find for “Create Block from selection”.
If I have to create a Block based on a selection I have to work with the Menu or have to activate the Cad Tools.

But, if I look at the Blocklist menu there is a function (+) to add an empty Block. It would be nice to have this button working for both situation - empty Block or depending on a selection to “Create Block from selection”.

Or alternative an additional Button ...

Anyway - in my opinion would that make the “Blocklist” complete.

It would be really cool to have a Note book tool for QCAD!

For example I am often working on a draft and at the same time scribbling notes down on a separate piece of paper relating to the drawing I am working on, could be anything e.g. add a block,add a dimension etc. etc... all sorts of things to remind myself about - all related to a particular drawing.

Of course I could use any number of other programs for this but a simple dedicated tool inside QCAD (could be called the ‘QCAD scribbler ;)) would be much better, especially one that can save the notes to a particular file, then when I open up my drawing again - my notes are there too!

My system: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz and 8 GB of RAM and NVIDIA GT218 (GeForce 210)

For a normal drawing displaying it in all detail is a good thing and the performance of my quad-core system is more than adequate.

But I discovered (or rather experienced) that when putting a large collection of individual drawings of gears onto one big sheet (960 mm x 600 mm - preparation for laser cutting), the performance was so bad that I had to wait several seconds (>10 sec) for each step in the process of arranging all the parts on the layer.

Request: It would be a big help and performance booster if you could disable the detailed view of each part/layer and only draw a rectangle to visualize the outline of the part.

Please take this in consideration. Attached you find an example of how that could look like. (Actually when pasting a drawing from the clipboard you already do that.)

Would it be possible to add a feature which turns selected text into solid fill hatched polylines?

That would make it possible to migrate the drawing from one computer system to another without having to worry whether the used font is installed on both systems, like when sending a drawing to a manufacturer for laser engraving.

Right now I can do it by hand, letter by letter, and that is a rather labour-intensive task.

Windows
3.0.8
Application preferences > Graphics View > Appearance - Solid grid lines doesn’t change anything?