|
2182 | QCAD (main) | Feature Request | Low | Select > Select Previous | Assigned | |
|
Task Description
Select the previously selected entities.
|
|
2181 | QCAD (main) | Suggestion | Very Low | Apply more distinguishable Enabled and Disabled state i... | Assigned | |
1 |
Task Description
QCAD Professional Win7 WinInstaller 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Related forum Topic: https://qcad.org/rsforum/viewtopic.php?t=8015
CVH
|
|
2180 | QCAD (main) | Feature Request | Very Low | Surface area off a hatch | Closed | |
1 |
Task Description
That would ease this task: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=8000
Correct surface area included. CVH
|
|
2179 | QCAD (main) | Bug Report | High | The use of 'Edit Block In-place' corrupts other open fi ... | Closed | |
|
Task Description
QCAD Professional Win7 winInstaller 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Include file was open when using ‘Edit Block In-place (BB)’ in an other drawing. Happend on 5/1/2021 just before 2:56 am https://qcad.org/rsforum/viewtopic.php?&t=7945#p31055
‘Edit Block In-place (BB)’ is never used in this drawing. There was never a Block in this file. I might have switched focus.
Re-installed QCAD a dozen times meanwhile. Wiped all what remained of QCAD twice. Cleaned up the windows registry twice. Lastly left out all kinds of my custom scripts. Simply a bare install with the msi file.
How to replicate: - Start QCAD in normal mode - Load included file - Set App.Prefs .. Startup .. Restore open files - Close QCAD - Start QCAD in debugger mode (-rescan -enable-script-debugger -always-load-scripts)
Boot fails. Every successive trial.
When booting in normal mode I see the BB options toolbar blink shortly.
3 Screengrabs in DebuggerModeError.zip in the same topic. The blink I can’t catch.
I can Boot with no file to retore on open in debugger mode and load the file. I have several of those files, all were open that day at 2:56 am
CVH
|
|
2178 | QCAD (main) | Bug Report | Low | Stored Color of text dimension changes | Assigned | |
|
Task Description
QCAD Pro 3.25.2.7 Win7 Wininstaller 32bit Related Topic: https://www.qcad.org/rsforum/viewtopic.php?&t=7954
Reported is that black is saved as #00004c (dark blue) Radek (iMac (Retina 5K, 27-inch, 2017), Catalina 10.15.7 (19H114)
My system/installation saves black as #4c000 (dark red)
When using single primary colors these get reduced to #4c, #7f, #99, #cc & #ff. The threshold for that are #00, #65, #8b, #b2 & #e5 See: DimColorScale (png & dxf)
8 standard CAD colors fail saving correct Black (something with #4c) Dark Red, Dark Green, Dark Blue, Dark Cyan, Dark Magenta, Dark Yellow (#80 turns #7f) & Gray (#adadad instead of #a0a0a4)
As with Gray, when mixing the 3 colors it gets rather fuzzy ... #505050 & #555555 both turn #5b5b5b & #464646 turns #4c4226
A snippet of my investigation is included in the topic (45 files in a ZIP)
CVH
|
|
2177 | Documentation | Suggestion | Low | Update class_r_polyline.html | Assigned | |
|
Task Description
Include RPolyline.getLeftRightOutline() method in class_r_polyline.html
In use since 11 Sept 2020
CVH
|
|
2176 | QCAD (main) | Bug Report | Very Low | Modify > Break out Manual: relevance of order of click ... | Assigned | |
|
Task Description
QCAD Professional Windows 7; Win installer 32 bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Forum Topic: https://qcad.org/rsforum/viewtopic.php?t=7988 File included. I have no intention to make 48 separate reports.
CVH
|
|
2175 | QCAD (main) | Bug Report | Low | Uncheck all/Check all buttons not disabled | Assigned | |
|
Task Description
In the Application Preferences>Draw>Text dialog, when first opened, the Uncheck all and Check all buttons are not disabled if the Show font preview in font controls check box is checked. If you click on the Use reduced selection of fonts check box twice the buttons become disabled.
|
|
2174 | QCAD (main) | Bug Report | Low | [SOLVED] Numerous shortcomings when exploding Polylines... | Assigned | |
|
Task Description
QCAD Professional Windows 7, Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Issues most likely unrelated to OS and installations before 3.25. Related post: https://qcad.org/rsforum/viewtopic.php?&t=7982
Flaws documented in full in attached dxf. The dxf has meaningful Layer States.
4 Columns: - Prior Art - The test cases - Actual results - Results with proposed fix
Tried as many things as I can come up with. Orange: Flaws Red: Errors Green: Good results (or as good as I can get them)
Solution(s) given in attached script explode.js (I am just a simple guy and wouldn’t know how to file a pull request on GitHub ......)
In section: “explode polyline into line and arc segments” group: “if (RPolyline.hasProxy() && polyline.hasWidths()) {....}” All additions, updates & typos are marked with “CVH”, one can textual search for it. Over-documented for sure. Any Eaction is to debug in Windows and is obsolete.
Included PreferencesPage.ui is updated for the all Splines from Text fix Still in consideration: Forcing cubic splines from text to degree 2 ... ... I am rather convinced ...
CVH
|
|
2173 | QCAD (main) | Feature Request | Low | View > Selection Filter: Add alpha property for hatches | Assigned | |
2 |
Task Description
Add alpha property to filter for hatches.
|
|
2172 | QCAD (main) | Feature Request | Low | Modify > Property Painter: Add alpha property for hatch ... | Closed | |
2 |
Task Description
The alpha property is a new feature. Now that we are using it it can be added to tools like the “Property Painter”.
|
|
2171 | QCAD (main) | Bug Report | Low | Scaling a block reference should not scale line type pa ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7948
|
|
2170 | QCAD (main) | Bug Report | Low | Draw > Text: Wrong color for formatted text blocks usin ... | Closed | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
File & picture included Work around: Chop it up or use a TTF font
Regards, CVH
|
|
2169 | QCAD (main) | Bug Report | Low | Missing G-Code G00 X0 Y0 when placing hole at x0 y0 | Assigned | |
|
Task Description
When placing a hole at x0 y0 there is no G00 x0 y0 in the exported G-Code. So the first cut was made at the current position of the tool, not at x0 y0!
|
|
2168 | QCAD (main) | Bug Report | Low | Explosion of a bulging Polyline with Widths may include ... | Closed | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Follow up on: https://www.qcad.org/bugtracker/index.php?do=details&task_id=2023 The zero crossing at 180° turn is fixed.
Found two very minute Line segments where the Width is set zero. Revision dxf included.
Referring to the grid they are rendered about 0.0002 long. They are in the order of 5e-15 and less or simply zero long in this case (<1ULP). Results may vary in length ... and vary after Save/Revert. Files included: PolyWidthErrLargeArc_v2.csv (a/b)
Not encountered on a Polyline with line segments.
Regards, CVH
|
|
2167 | QCAD/CAM | Bug Report | Low | Comma format decimal separator fails ZSafety CAM config... | Assigned | |
1 |
Task Description
QCAD/CAM Trial package Win installer 32 bit Version: 3.25.2.0 (3.25.2) Internet: QCAD.org Build Date: Sep 4 2020 Revision: 4a61501 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Local decimal separator is ‘,’ (comma) In CAM configuration .. Z Levels .. Safety level
Using nn,nnn the output is Nxx G0 Znn Using nn.nnn the output is Nxx G0 Znn.nnn
Drop down boxes are all in dot format. Didn’t try anything else yet
Regards, CVH
|
|
2166 | QCAD (main) | Suggestion | Medium | Text box creates wrong line break - Textbox erzeugt fal ... | Closed | |
|
Task Description
Englisch: A text that ends with a line break is displayed incorrectly.
I think the \P should be passed to the program to create the line break. Unfortunately it is taken over directly into the text.
See attachment
Deutsch: Textbox erzeugt falschen Umbruch
Ein Text der mit einen Zeilenumbruch endet, wird falsch dargestellt.
Ich denke mal das \P sollte an das Programm weitergegeben werden um den Zeilenumbruch zu erzeugen. Leider wird es direkt in den Text mit übernommen.
Siehe Anhang
|
|
2165 | QCAD (main) | Bug Report | Low | Rectangle with Size (RS) doesn't remember Fill, RoundCo ... | Closed | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7900 Report: https://qcad.org/rsforum/viewtopic.php?f=33&t=7900#p30977
Rectangle with Size (RS) doesn’t update the Fill, RoundCorners & Radius settings shared under the [Shape] header in QCAD ini.
Explained as group synchronization while the Polygon methods have more settings in common, although not shared.
In the summary there are more minor issues listed. All have a bar in the Options Toolbar that disappears after the first is drawn.
I rather would opt for all individual settings ... ... or all grouped.
Regards, CVH
|
|
2164 | QCAD/CAM | Feature Request | Low | Add ability to pan the 3D view with a modifier key and ... | Assigned | |
|
Task Description
With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.
|
|
2163 | QCAD (main) | Bug Report | Low | File > SVG Import: parsing path data with implicit sepa ... | Closed | |
|
Task Description
Path data might contain leading zeroes to indicate an implicit separator:
“1 02” should be equivalent with “1 0 2”, not “1 2”.
|
|
2162 | QCAD (main) | Suggestion | Low | Update the parameter with simplify of RPolylineData & R... | Assigned | |
1 |
Task Description
Unrelated to OS, nor version
Reported Jun 23, 2020 in: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372
Status Dec 24, 2020: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372#p30955 Documentation is updated. The Classes still refer to an ‘angleTolerance’.
Regards, CVH
|
|
2161 | QCAD (main) | Feature Request | Low | Make Polyline from Selection (OC) configurable for simp... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Not related to OS, nor version.
The method Polyline from Segments (OC) can be configured for tolerance and simplification in the Options Toolbar. The method Polyline from Selection (OG) has no UI or none showing.
OG retrieves a tolerance from QCAD.ini, what is initially not set:
var tolerance = RSettings.getDoubleValue("PolylineFromSelection/Tolerance", 0.001);
The tolerance will be default = 0.001 similar as the default in AppPrefs. The tolerance setting is included in QCAD.ini after changing the AppPrefs entry.
OG calls PolylineFromSelection.autoJoinSegments with this tolerance:
var counter = PolylineFromSelection.autoJoinSegments(di, tolerance, this);
PolylineFromSelection.autoJoinSegments calls PolylineFromSegments.createPolylineShape with simplification hard coded to true. (last parameter)
// create polyline from line, arc, spline or open polyline entity:
var polyline = PolylineFromSegments.createPolylineShape(
entity, doc, vTolerance, op, undefined,
traversed, callBacks, undefined, true);
I would like to see the simplification optional and default = true.
Regards, CVH
|
|
2160 | QCAD (main) | Bug Report | Low | Draw > Polyline > Relocate Start Point: fails on polyli... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Origin: I like to start my CAM paths at low curvature instead starting at high curvature. Ellipses may explode with the startpoint at the tip. (file Y2)
Documented in 3.25.2.4, reproducible under 3.25.2.7
File included with 4 LayerStates - Original Ellipses: Y1 - Exploded to polylines (32 segments): Y2 - Direct after XP, OR performs different on the left top one: Y3 - Faulty solutions by OR: Y4 (= saved state)
The results may differ with the saved explosions.
With the file. Y1 TA XP Relocate startpoint with OR to an existing reference (called ‘End’)
Regards, CVH
|
|
2159 | QCAD (main) | Bug Report | Low | Draw > Polyline > Polyline from Selection: may induce N... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32 Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Discovered in 3.25.2.4, reproducible under 3.25.2.7
Draw any open or closed chain of line entities. Select All. OC to Polyline. Step through vertices.
No example file provided because these NaN values are not saved to a file. More pronounced with lines as with arcs. Less pronounced when recombining after an explosion. Some methods clear these to value = void. Some methods clear these to zero (OR). Can also occur when adding segments to an existing polyline with OC.
Regards, CVH
|
|
2158 | QCAD (main) | Bug Report | Low | dwg2bmp: -origin does not export origin | Closed | |
|
Task Description
-origin has no effect, origin is not drawn in export
|
|
2157 | QCAD (main) | Bug Report | Low | Controlpoint Spline exploded to polyline may induce NaN... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Documented in 3.25.2.4, reproducible under 3.25.2.7 In the attached file: → Explode the trial cases and locate NaN Widths. → These faulty widths are cleared while saving and reverting. = work around.
Related Post: https://www.qcad.org/rsforum/viewtopic.php?t=7902#p30902 Related Topic: https://www.qcad.org/rsforum/viewtopic.php?t=7901 Related Commit: https://github.com/qcad/qcad/commit/fcd7929bced7ae328029c1aa2ee2aff2745709c6
Arctic_Eddie reports failing CAM offset at exactly these points !!! Reported is a faulty arc with radius of over 360,000mm. - I can not reproduce this under QCAD working further on the Polys with NaNs. - However the direct offset of such controlpoint Splines is erroneous. (see file in post 30902)
Arctic_Eddie reports arc radii of over 10,000mm. - These don’t seem to be faulty. - I agree that BiArc fitting should be bound to a lower and certainly to an upper limit. - That should be huge otherwise faint curvature is represented by many wobbles or too quick by straight lines. (All this, keeping in mind that QCAD doesn’t return the optimum fitted BiArc, see: https://www.qcad.org/rsforum/viewtopic.php?t=4859)
Regards, CVH
|
|
2156 | QCAD (main) | Suggestion | Low | Add an option to XP preferences to include circles or n ... | Closed | |
1 |
Task Description
Andrew, unrelated to any OS or version.
Circles do explode to polylines with two arc segments. Discussed earlier and very correct because a full circle bulge would be a mathematical limit situation.
When there is no option to ‘Undo’ anymore or when the file was saved & loaded there is no easy way back.
One of the reasons why I isolate circle entities if I might going to use XP as in the file here: https://qcad.org/bugtracker/index.php?do=details&task_id=2155 Even knowing it, I still make more mistakes as I would like.
It would be nice to be able to exclude circle entities from the GUI explosion action XP. Can be simply implemented in the top of Explode.explodeSelection with an extra preference in AppPrefs, default =true.
On the other hand, the explosions of circles used internally in various methods should remain.
Regards, CVH
|
|
2155 | QCAD (main) | Bug Report | Very Low | Faulty rendering Polyline Arcs with Width = 2R | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Most likely not related to the QCAD version, rather an old sore.
File included Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7889#p30803 Confirmed by ‘cccplex’ Linux ‘Latest Ubuntu’
Polyline arcs with Width = 2R render as circle segments rather than circle sectors. As Non-reversed arcs these don’t explode. As reversed arc these explode to a single arc rather than a circle sector contour.
There is also still the faulty rendering with Z not zero https://qcad.org/bugtracker/index.php?do=details&task_id=1923
Regards, CVH
|
|
2154 | QCAD (main) | Bug Report | Low | View > Library Browser: '0' shortcut breaks value enter ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7900
|
|
2153 | QCAD (main) | Bug Report | Low | Freeze program when using text tool | Closed | |
|
Task Description
Using version 3.25.2.4
Add or change text. Inside the rich tab I try to change the text height. The program freezes. Tried with different fonts.
|
|
2152 | QCAD (main) | Bug Report | Low | Status change for Visibility in Viewports fails | Closed | |
|
Task Description
Status change for Visibility is without any effect on Viewports in Paper_Space.
Case: Entities drawn on a layer in Model_Space. Visibility on/off works. Situation covered with a Viewport, placed in Paper_Space, Edit content launched for that Paper_Space, Visibility on/off doesn’t works.
It was properly working in previos QCAD versions ...
|
|
2151 | QCAD (main) | Bug Report | Very Low | Update viewport on Layout after Layer property change | Closed | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
With the attached file: Viewing Layout1 Changing ON/OFF or Frozen state of layers in the Layer List
The view doesn’t update immediate. Selecting an entity: Yes After QQ Yes Switching to another Application and reverting the focus back to QCAD: Yes Using zoom / pan or the Zoom functions: No Changing the display modes: Yes Starting an action: No
|
|
2150 | QCAD (main) | Bug Report | Low | Modify > Stretch: block with attribute not moving | Closed | |
|
Task Description
Create block with attribute definition (attribute definition has lowest draw order in block).
Create block reference from block.
Modify > Stretch with area around block reference.
Block reference does not move.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7895
|
|
2149 | QCAD (main) | Suggestion | Very Low | Allow undo after auto trim self-intersecting with AX in... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can auto trim (AX): - The lower loop. - The top loop. Bug? The action on the top loop can’t be undone.
Regards CVH
|
|
2148 | QCAD (main) | Suggestion | Very Low | Allow undo after breaking up self-intersecting with D2 ... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can break out segment (D2): - removing one of the loops with the ‘remove’ option. - leaving both without the ‘remove’ option. Bug? Without the ‘remove’ option it can’t be undone.
Regards CVH
|
|
2147 | QCAD (main) | Suggestion | Very Low | Allow breaking up self-intersecting a 2e time (at endpo... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can cut (DI) once. Cutting the second segment results in NO cut.
Regards CVH
|
|
2146 | QCAD (main) | Suggestion | Very Low | Keep 'Invisible' objects invisible while saving | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Related topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7882 Explanation found in REntity.cpp Listed as a Public Member Functions inherited from RObject
Regards, CVH
|
|
2145 | QCAD (main) | Bug Report | Low | Modify > Trim Both: closed polyline as either entity br... | Assigned | |
1 |
Task Description
QCAD Professional
Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Use TM by mistake to trim a line to a closed shape. Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7780 File included in the topic. Y1 Original Y2 Faulty use of TM Y3 After ‘Undo’
Husky only ‘could agree on a not proper working undo’ The conditional clause of this sentence is ‘the odd choice’. Blaming this on incompetence. Insight is the best way to get better ... ... but the rest is more an odd choice of tools for this kind of task ...
Again, the MISTAKE was by accident, not intended, in a flick of the wrist ... I didn’t change the trimming method, I simply forgot to ... only once.
The ‘undo’ of my incompetent MISTAKE didn’t returned to how the situation was before I erroneous trimmed with TM. I was simply undoing my erroneous action.
Documented it in 4 quadrants. For this, 4 times on purpose, and not as a consistent ‘odd choice’.
Regards, CVH
|
|
2144 | QCAD (main) | Bug Report | Very Low | Draw > Viewport > Add Viewport: Custom hatch pattern no ... | Closed | |
|
Task Description
QCAD Professional
Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Orphan Hatches (without a *.pat file installed) are no longer visible in a viewport
Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7830 Original topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7340 File: #2 https://qcad.org/bugtracker/index.php?do=details&task_id=2063
Regards, CVH
|
|
2143 | QCAD (main) | Bug Report | Low | Rendering: arcs in scaled up blocks rendered with too l ... | Closed | |
|
Task Description
Create block with arc or circle Insert block with factor 100 Rendering is too coarse
|
|
2142 | QCAD (main) | Bug Report | Low | Viewports: Cannot snap to reference points of circles / ... | Closed | |
|
Task Description
Reported by CVH
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7868
|
|
2141 | ECMAScript | Suggestion | Low | Typo in simple.js | Closed | |
|
Task Description
Andrew,
Both disableInput() & enableInput() in simple.js state that input is prevented ...
It is most obvious
Regards, CVH
|
|
2140 | QCAD (main) | Suggestion | Low | Changing navigation mode for mouse wheel doesn't change... | Assigned | |
1 |
Task Description
Looks like error, but may be that’s feature request.
CAD software uses typical navigation behavior as: Wheel = Zoom; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right.
Any other software like browsers, office software (openoffice writer, ms excel and so on), 2d paint software like GIMP (Photoshop and so on) uses other behavior: Wheel = Scroll up/down; Ctrl+Wheel = Zoom; Shift+Wheel = Scroll left/right.
Users, that intensively use CAD and other software simultaneously prefer to make same behavior in their applications switching CAD scroll to plain mouse wheel.
QCAD’s “Application Preferences”: “Graphics View: Navigation”: “Mouse wheel/ two finger swipe”: “Scroll” allow user to assign scroll up/down to wheel mouse instead of Zoom. But there is mistake Ctrl+Wheel didn’t change to Zoom. Ctrl+Wheel continues to scroll up/down, as the wheel. Wheel = Scroll up/down; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right. No zoom!
Draw manipulation at this mode like a hell: you need to use wheel in conjunction with Ctrl/Shift to point draw in desired position, than move your hand to +(-) for make desired zoom.
|
|
2139 | QCAD (main) | Feature Request | Very Low | Auto revert to format = 'Decimal' isn't complete | Closed | |
1 |
Task Description
From this Topic: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7818
Trial 1 doesn’t gives the intended result. Trial 2 includes manual altering back and forth the Format field what gives the intended result
Regards, CVH
|
|
2138 | QCAD (main) | Suggestion | Very Low | Block zoomstate supersedes Model_Space after Undo of BC | Assigned | |
1 |
Task Description
Summary: Block zoomstate supersedes Model_Space after Undo of BC
QCAD Professional Version: 3.25.2.1 (3.25.2.1) Internet: QCAD.org Build Date: Oct 15 2020 Revision: 2895712 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown «< (Win installer 32 bit)
With the file provided: ZW to see the top green ‘revision cloud’ up close QQ Box select around the cloud »> 2 entities in selection BC, select origin somewhere inside the selection, accept proposed naming »> ‘Block 1’ is created from the selection TN BD, select the newly created Block Reference »> Auto zoom of ‘Block 1’ (Intended behavior) OO »> Returns to Model_Space with the zoomstate of the removed Block »> Halfway down the drawing »> The former zoomstate of the Model_Space is lost
Intended behavior is that the zoomstate of Model_Space and Blocks don’t mix See: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=7797&p=30371#p30378
This proves they do, even if the block doesn’t exists anymore.
Regards, CVH
PS: 3th trial to enter a suggestion ...
|
|
2137 | QCAD (main) | Bug Report | Low | View > Property Editor: Block reference shows propertie ... | Closed | |
|
Task Description
Create block with attribute definition. Create block reference. Edit block and delete attribute definition. Select block reference. > Property editor shows deleted attribute
|
|
2136 | QCAD Community Edition | Bug Report | Low | dash (and other) linetype isn't showing on normal drawi ... | Closed | |
|
Task Description
Good night,
I have attached three print screen. One showing the print preview mode, one showing the normal drawing mode and the last one showing the result pdf (that looks like the print preview draw).
Thank you for your great work on this project.
|
|
2135 | QCAD (main) | Bug Report | Low | CAM > Nesting: quantity not correct | Closed | |
|
Task Description
Under Linux the quantity is not correctly interpreted.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=7784
|
|
2134 | QCAD (main) | Bug Report | Low | Property Editor, Total Length result incorrect | Closed | |
|
Task Description
Case: Tested with the example drawing provided below: https://www.qcad.org/rsforum/viewtopic.php?f=83&t=7776
If I select every single entity piece by piece with the mouse pointer the total length is correct. If I select everything in once with a rectangular or a polyline selection the total length is incorrect.
|
|
2133 | QCAD (main) | Bug Report | Low | Modify > Break out Manual: exception for closed polylin ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7768
|