|
560 | QCAD (main) | Bug Report | Very Low | Some parameters changes lost after saving and reopening ... | Closed | |
|
Task Description
Hi, First of all, thanks for this wonderful product !
My issue : when I modify (at file level) some parameters like the number of decimals in cotations, or the linethikness of a calc, these modifications are lost after saving and reopening the dxf. It comes back to the default values. It is not the case for the colors for instance.
At your disposal for other informations. Fred
|
|
559 | QCAD (main) | Feature Request | Low | Library Symbole mit gleichen Namen wie in der Zeichnung ... | Closed | |
|
Task Description
Blocknamen in einer Zeichnung haben Vorrang gegenüber gleichen Blocknamen aus der Library.
Eine Sicherheitsabfrage wie z.B.: Vorhanden Block überschreiben, ignorieren etc oder neuen Block umbenennen würde viele Überraschungen verhindern.
|
|
558 | QCAD (main) | Feature Request | Low | Blöcke aus dem Editiermodus direkt in der Library speic ... | Closed | |
|
Task Description
Blöcke aus dem Editiermodus direkt in der Library speichern zu können wäre eine erheblicher Arbeitsersparnis.
Wenn ich persönlich einen Block in einer Zeichnung erstelle überlege ich mir natürlich gleich ob ich diesen nicht auch in anderen Zeichnungen verwenden könnte. Somit erhalte ich leicht eine Umfangreiche Library die mein Leben leichter macht ....
|
|
557 | QCAD (main) | Bug Report | Low | In Blöcken kann am Kreis kein Reference Punkt als Fang ... | Closed | |
|
Task Description
In Blöcken kann am Kreis kein Reference Punkt als Fang benutzt werden. Alle anderen Punktbestimmungen scheinen zu funktionieren.
|
|
556 | QCAD (main) | Feature Request | Low | Can't change entity's layer by double-click | Closed | |
|
Task Description
Hi,
One thing not in the v3 (but in the v2) is the ability to assign a layer to an entity by double click on the layer name (in the layers list)
On V 2 : 1 - Select entity 2 - Double click on the layer’s name
> then le entity is in this layer
On V 3 : 1 - Select entity 2 - Double click on the layer’s name
> nothing change
It’s useful to change it by this way, please make it possible in v3.
|
|
555 | QCAD (main) | Feature Request | Low | Blöcke zählen .... | Closed | |
|
Task Description
Eine Zählfunktion die erfasst wie oft ein Block in einer Zeichnung vorhanden ist.
Hintergrund ist das es damit eine Unterstützung gäbe die das erstellen von Stücklisten etc. erleichtert würde.
Die Anzahl der Blöcke könnte z.B in der Block List eingeblendet werden wie z.B.: “Schraube M6x40 (17x)” oder auch in einer extra Text Liste. Zudem könnten so auch nicht (oder nicht mehr) benutze Blöcke ermittelt werden wie z.B. “Schraube M6x20 (0x)” welche dann aus der Zeichnung entfernt werden könnten.
Siehe auch:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=1920
|
|
554 | QCAD (main) | Feature Request | Low | Auswahlbox sollte auch mit der Shift Taste Bereiche dem... | Assigned | |
|
Task Description
Ziehe ich mit der Maus eine normale Auswahlbox kann ich Elemente markieren. Möchte ich einzelne Bereiche wieder herausnehmen muss ich alle Elemente einzeln anklicken (mit gedrückter Shift Taste). Ich kann zwar dies komfortabler gestalten mit der Select → (De -) Select Contour Funktion welche aber erst über das Menue aufgerufen werden muss.
So wie ich einzelne Elemente mit der Maus auswählen und mit der Shift-Maus Funktion deselektieren kann wäre es schön wenn die Shift Taste auch bei Auswahlbereichen direkt zum deselektieren eingesetzt werden könnte.
|
|
553 | QCAD (main) | Bug Report | Low | Auswahlbox ignoriert bestimmte Bemaßungen mit geänderte ... | Closed | |
|
Task Description
Ziehe ich mit der Maus eine normale Auswahlbox wird bestimmte (nicht alle) Bemaßungen ignoriert welche geänderte Label haben. In meinem Fall z.B. <>” (reality check)
|
|
552 | QCAD (main) | Feature Request | Medium | autosave removing last auto saved file | Closed | |
|
Task Description
I would like to see an autosave-option which allows to autosave, but which keeps only the latest autosave file (instead of all). So there would be autosave (if something crashes) but the hard disk is not filled up too fast.
|
|
551 | QCAD (main) | Bug Report | Low | Layer changes by Trim | Closed | |
|
Task Description
If an entety has a different layer than your choice in the layerlist: By trimming a circle it changes the layer of selected entety to the layer that is chosen in the layerlist. You have to change the layer of the entety back to the previous layer after trimming.
|
|
550 | QCAD (main) | Feature Request | Low | Search / replace for (selected) text entities | Closed | |
|
Task Description
See also: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=1923
|
|
549 | QCAD (main) | Bug Report | Very Low | linewidth seems to be ignored in bitmap export | Closed | |
|
Task Description
I tried exporting a 297x210mm drawing to png with 2970×2100 pixels, lines had linewidth 2mm and resulting lines in png had only a few pixels (instead of the expected ~20 pixels).
|
|
548 | QCAD (main) | Bug Report | Low | russian codepage error in text tool | Closed | |
|
Task Description
1. add any russian (cyrillic, for example йцук) text via text tool 2. save file 3. close file 4. open file 5. voila (see attached screenshot)
|
|
547 | QCAD (main) | Bug Report | Low | grid movement | Closed | |
|
Task Description
I just made the R5 update and I noticed that moving the pointer from the canvas to the command bar button to the left, you build a movement of the drawing grid in the direction up-down. With the R4 did not happen.
|
|
546 | QCAD (main) | Bug Report | Low | visible hint lost in RC5 if hatch loop not closed | Closed | |
|
Task Description
RC4 and RC5 lost the very useful visible hint that was shown in RC2 at the invalid point of a non-closed boundary.
If this is not a bug, this task is a feature request to re-insert this feature.
|
|
545 | QCAD (main) | Bug Report | Low | russian codepage error in Layer list | Closed | |
|
Task Description
1. Creating new file 2. create new layer with cyrilic name, ex.: фыва screenshot #1 3. saving 4. closing 5. look in file see correct UTF-8 name screenshot #2 6. opening file via qcad/ oops! layer name is incorrect screenshot #3 7. saving file 8. closing 9. look in file. got incorrect version
my guess, that the problem is that whole file is encoded as ANSI:
$DWGCODEPAGE
3
ASCII
9
but layer names are coded as UTF-8. so additional converting ANSI→UTF-8 is demanded
|
|
544 | QCAD (main) | Bug Report | Low | Hatch not restored correctly in undo operation after sc ... | Closed | |
|
Task Description
Scaling some entities including hatches and undo-ing this, the hatches are not restored correctly (still existing, but completely malformed).
|
|
543 | QCAD (main) | Bug Report | Low | Unit Konvertierung bei Blocks funktioniert nicht ... | Closed | |
|
Task Description
Wenn ich eine Zeichnung in mm als Grundlage benutze um über die Zwischenablage etwas in eine Inch Zeichnung zu übernehmen wird alles Maßstäblich in Inch konvertiert. Sehr schön
Wenn ich aber einen Block der in einer mm Zeichnung erstellt wurde über die Zwischenablage in eine Inch Zeichnung kopiere wird die Kopie als solches in der Zeichnung auch wieder in Inch konvertiert - der Block wird aber abgelegt in 1mm = 1” und kann unbearbeitet nicht weiterverwendet werden. Nicht schön
Natürlich kann man jetzt fragen: Wer braucht solch einen Blödsinn? Antwort: Amerikaner! In den USA wird blödsinniger weise gemixt .....
|
|
542 | QCAD (main) | Bug Report | Low | Snap > Restrict horizontal cannot be applied to Snap > ... | Closed | |
|
Task Description
Vorgabe: Kreis der verschoben werden soll auf einen Punkt zwischen zwei Vertikale Linien.
Auswahl des Kreises, Funktion Verschieben/Kopieren, Referenzpunkt = Mitte Kreis, Zielpunkt Middle Manuel, Erster Punkt = Center 1. vertikale Linie, Zweiter Punkt restricted Horizontal zum ersten Punkt, QCad benutzt nun fälschlicher Weise den Referenzpunkt des Kreises anstatt den Center der bereits gewählten 1. vertikalen Linie ....
|
|
541 | QCAD (main) | Bug Report | Low | dxf not readable with QCad3 but was in QCad 2 | Closed | |
|
Task Description
I got a dxf (AC1006) from a client which is not readable by QCad 3 RC5 (”check file format...”) but is perfectly shown by QCad 2.2; opening in QCad 2.2, saving there and re-opening in QCad 3 does the trick.
|
|
540 | QCAD (main) | Bug Report | Very Low | "pa" ("parallel") keycode triggers wrong action | Closed | |
|
Task Description
In the latest QCAD Community Edition source code (2.0.5.0-1-community), the wrong action is triggered for the “pa” keycode. Specifically, it triggers the basic draw line command. Here is the relevant code from qcadcmd/src/rs_commands.cpp, in RS_Commands::keycodeToAction:
} else if (c==tr("li", "line")) {
ret = RS2::ActionDrawLine;
} else if (c==tr("pa", "parallel")) {
ret = RS2::ActionDrawLine;
I believe this should instead be:
} else if (c==tr("li", "line")) {
ret = RS2::ActionDrawLine;
} else if (c==tr("pa", "parallel")) {
ret = RS2::ActionDrawLineParallel;
|
|
539 | Translation | Bug Report | Low | No translations in linux installer | Closed | |
|
Task Description
Installing QCAD 3 RC5 under Linux using the .bin installer leads to an English only installation.
|
|
538 | QCAD (main) | Feature Request | Low | add to / remove from hatch | Closed | |
|
Task Description
Given a hatch, it would be very useful if one could add another closed polyline to the existing hatch or remove the overlapping area from the existing hatch.
|
|
537 | QCAD (main) | Bug Report | Low | colors changed for print | Closed | |
|
Task Description
light grey is printed as black starting with RC5 (was grey in RC4 which was fine)
|
|
536 | QCAD (main) | Bug Report | High | Update RC5 NO icons | Closed | |
1 |
Task Description
After Update to RC5 there are NO icons displayed
|
|
535 | QCAD (main) | Feature Request | Low | Trim Werkzeug auch zum verkürzen von Linien ... | Closed | |
|
Task Description
Das Trim Werkzeug in QCad ist ideal um Linien zu verlängern in Bezug zu einer anderen Linie. Wäre schön wenn dies auch umgekehrt funktionieren würde so das ich Linien verkürzen kann in Bezug zu einer anderen (nicht schneidenden) Linie.
|
|
534 | QCAD (main) | Feature Request | Low | Werkzeug Lengthen erweitern mit minus amount .... | Closed | |
|
Task Description
Wäre schön wenn das Werkzeug “Lengthen” auch mit Minus Amounts funktionieren würde ....
|
|
533 | QCAD (main) | Feature Request | Low | Kopierendes/Ausschneidendes Rechteck (Kreis) Werkzeug . ... | Closed | |
|
Task Description
In meiner Vergangenheit habe ich in anderen CAD Programmen mit folgendem Werkzeug gearbeitet was ich für Detailansichten, Bereinigungen oder ähnliches extrem Hilfreich empfand. Wäre schön wenn es so etwas auch in QCad gebe.
Werkzeug: Man zieht ein Rechteck (oder Kreis) über einen gezeichneten Bereich auf. Alles was innerhalb oder außerhalb des Rechtecks liegt wird kopiert/ausgeschnitten/gelöscht und auch direkt an den Linienkanten des auswählenden Rechtecks geschnitten.
Momentan kann ich ein Rechteck für Selektion bestimmen - muss aber dann nach einer Kopie alles manuell trimmen, löschen etc. um nur den gewünschten Rechteckinhalt zu bekommen ...
|
|
532 | QCAD (main) | Bug Report | Low | Linux binaries link against libglu.so.1 | Closed | |
|
Task Description
Dependency possibly not needed?
See forum thread: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=8&t=1902
|
|
531 | QCAD (main) | Bug Report | Medium | Qcad stops working after selecting and moving an entity ... | Closed | |
|
Task Description
I am a new user and bought qcad this afternoon. Sometimes qcad stops working after selecting and moving an entity. it happens almost every one to two hours. twice until now. I tried version 2.2.2.0 that didn’t have this problem.
|
|
530 | QCAD (main) | Bug Report | Medium | sporadic unwanted close of QCad | Closed | |
|
Task Description
Using the move and scale tools, QCad sometimes (reason unknown so far) crashes in RC4 (never seen that in RC2).
|
|
529 | QCAD (main) | Bug Report | Low | move tool moves entities to mouse position instead of c ... | Closed | |
|
Task Description
Sometimes (60%, unknown reason) the move tool MV moves the selected entities to the current mouse position (after the final “ok” click at the move properties dialog) instead of click position of target (before the move properties dialog).
|
|
528 | QCAD (main) | Feature Request | Low | Font Editing | Closed | |
|
Task Description
Dear Sir, I have noticed that in QCAD 3 rc4 it is not possible to open and edit font files. This feature exists in version 2.2 and is indispensable to people using not common languages. For example the unicode font does not have all greek characters, so I have added a few of the missing ones by editing the unicode.cxf font with version 2.2. I kindly ask the designers to consider enabling this capability again. Thank you!
|
|
527 | QCAD (main) | Feature Request | Low | Command line option to use alternative location for con ... | Closed | |
|
Task Description
Speziell gedacht für den Mobilen Einsatz wie z.B. auf einen USB-Stick um bei wechselnden PC Einsatzorten immer wieder die einmal gemachten Einstellungen für QCad benutzen zu können.
Siehe auch hier: http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5888#5888
|
|
526 | QCAD (main) | Bug Report | Low | Qt Debugger appears right clicking view widget | Closed | |
|
Task Description
Right clicking at “view list” widget list results in Qt Debugger appearing with message
Uncaught exception at /opt/qcad-3.0.0-rc4-prof-linux/scripts/Widgets/ViewList/ViewList.js:46: TypeError: Result of expression ‘RGuiAction.getByScriptFile(”scripts/View/Remove/RemoveView.js”)’ [null] is not an object. 46 RGuiAction.getByScriptFile(”scripts/View/Remove/RemoveView.js”).addToMenu(menu);
|
|
525 | QCAD (main) | Feature Request | Low | change the printed symbol of points | Assigned | |
1 |
Task Description
Hi,
in QCAD3 RC2 points were printed as crosses, in QCAD3 RC4 they are printed as (very little) points. I think this isn’t a bug but a feature.
It would be nice if one could change this behaviour / select the symbol of points.
Best regards - Stefan
This is a double post of http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5870#5870 as suggested there.
|
|
524 | QCAD (main) | Bug Report | High | Debugger appears when using lengthen tool | Closed | |
|
Task Description
When attempting to use the Lengthen tool, the Qt Script Debugger was activated. The following exception was noted:
Welcome to the Qt Script debugger. Debugger commands start with a . (period). Any other input will be evaluated by the script interpreter. Type “.help” for help.
Uncaught exception at scripts/Modify/Lengthen/Lengthen.js:137: TypeError: Result of expression ‘this.entity.trimStartPoint’ [undefined] is not a function. 137 this.entity.trimStartPoint(is);
The application then crashed and report was sent to Apple.
|
|
523 | QCAD (main) | Bug Report | Low | Selection tool button in CAD tool bar shows line tools ... | Assigned | |
|
Task Description
The selection tool is not accessible:
Click on Selection Tool icon - left panel:
Left panel then shows line tool options.
Click “back” button at top of left panel:
Left panel then shows selection options.
Click an option icon:
Left panel then shows line tool options again.
|
|
522 | QCAD (main) | Bug Report | Low | View > toolbars is only accessible by right clicking. | Closed | |
|
Task Description
Andrew
In Windows 7-64, the view > toolbar options are only available by ‘right clicking’ in the main menu somewhere. They are not included in the view ‘drop down’ menu!
|
|
521 | QCAD (main) | Bug Report | Low | dwg2pdf lost output with RC4 | Closed | |
|
Task Description
Previous working example script dwg2pdf creates empty pdf with QCad 3 RC4. File size matches output of dwg2pdf in RC2, but output was ok in RC2.
|
|
520 | QCAD (main) | Bug Report | Medium | move entity from command line is broken on ubuntu 64 bi ... | Closed | |
|
Task Description
when I try to move an entity via the command line using the mv command the entity does not move to the specified position. it works if i use the mouse. this was fine in rc2 and rc3 ubuntu 64 bit and windows 64 bit machines.
|
|
519 | QCAD (main) | Feature Request | Low | Press tab to access first control in options tool bar | Assigned | |
1 |
Task Description
See: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1867
Apparently this was possible in QCAD 2 due to the default behavior of Qt.
|
|
518 | QCAD (main) | Bug Report | Medium | Unable to use Library browser properly in RC4 | Closed | |
|
Task Description
Hi Andrew
In Ubuntu 11.10 and Windows 7 everything so far is working ok in QCAD apart from the Library browser!
1.In Win 7-64 I can run the browser and make a new folder, but when I try to set the permissions/open the folder - browser crashes.
2.In ubuntu 11.10 I first uninstalled RC2 then installed RC4. QCAD program runs ok but this time when I try to open up the browser (not a new folder)I get an error message stating that I do not have permissions to open the first file (vehicle -I think!)in RC2? If I select OK in the warning window the warning just keeps on repeating the same message for the next and subsequent files until I quit it.
|
|
517 | QCAD (main) | Feature Request | Low | Import 3D polyline as 2D polyline | Closed | |
|
Task Description
Import 3D polyline as 2D polyline from DXF/DWG
Like QCAD 2.
|
|
516 | QCAD (main) | Feature Request | Low | To add option to 'print only' selected area. | Assigned | |
2 |
Task Description
To add the option to ‘print only’ selected area in a drawing.
|
|
515 | QCAD (main) | Bug Report | Medium | File - Save / Save as: Null Object ID | Closed | |
|
Task Description
“Null Object ID” exception when saving a previously loaded file.
File: “fs515.dwg”
|
|
514 | QCAD (main) | Feature Request | Low | Punktpestimmung Intersection manual muss immer wieder n... | Assigned | |
|
Task Description
Beispiel: Zeichnen einer Linie (Line two points) mit Punktbestimmung. Wähle ich für die Punktbestimmung z.B. “End” bleibe ich in diesem Modus bis ich etwas anderes wähle. Gut
Wähle ich für die Punktbestimmung “Intersection manual” muss ich dies für jeden Punkt immer wieder neu anwählen. Schlecht
|
|
513 | Translation | Bug Report | Low | Translation errors | Assigned | |
|
Task Description
If you spot an error in the translated user interface of QCAD, please add a comment to this task or submit your translation at http://translate.qcad.org. Thank you for your help!
Wenn Sie einen Fehler in der übersetzten Benutzeroberfläche von QCAD erkennen, fügen Sie bitte einen Kommentar zu diesem Report hinzu oder geben Sie Ihre Übersetzung ein unter http://translate.qcad.org. Vielen Dank für Ihre Hilfe!
Si vous remarquez une erreur dans l’interface utilisateur traduite de QCAD, veuillez ajouter un commentaire à cette tâche ou soumettre votre traduction à http://translate.qcad.org. Merci pour votre aide!
Si detecta un error en la interfaz de usuario traducida de QCAD, añada un comentario a esta tarea o envíe su traducción a http://translate.qcad.org. Gracias por tu ayuda!
Se si rileva un errore nell’interfaccia utente tradotta di QCAD, si prega di aggiungere un commento a questo compito o di inviare la traduzione a http://translate.qcad.org. Obrigado por sua ajuda!
Se você detectar um erro na interface de usuário traduzida do QCAD, adicione um comentário a esta tarefa ou envie sua tradução para http://translate.qcad.org. Obrigado pela sua ajuda!
Als u een fout ziet in de vertaalde gebruikersinterface van QCAD, voeg dan een opmerking toe aan deze taak of stuur uw vertaling naar http://translate.qcad.org. Bedankt voor uw hulp!
|
|
512 | QCAD (main) | Feature Request | Low | Modify stretch and Restrict ortho | Assigned | |
1 |
Task Description
The modify stretch tool wants first and second corner, start and end point, then starts afresh. When I turn on restrict horizontally eg to align two points between start and end, the restriction sticks and I have to call restrict none, to be able to perform the next iteration, set the first corner then.
So, in the quest for a comfortable user interface, it was nice, if the modify stretch first/second corners parameter setting was not affected by current restrict/ortho etc. settings. Actually, that does not make any sense at all anyways, does it, a rectangle is defined by two degrees of freedom, isnt it?
|
|
511 | QCAD (main) | Bug Report | Low | Hatch fails with multiple full-ellipse islands | Closed | |
|
Task Description
Hatch fails with more than one full-ellipse islands
See fs511.dxf
|