QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  asc
 1786 QCAD (main)Bug ReportLow Block > Select Block References: not using active block ...Closed
100%
Task Description

... can’t find Block References if the Block which contains the Block References (Attributes) isn’t selected prior with the mouse.

The Selection Filter will find the Block References regardless which block is chosen in the Block List.

 1787 QCAD (main)Bug ReportLow View > Property Editor: Layer combo box not sorted Closed
100%
Task Description

Layer combo box in the property editor is not sorted.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5714

 1790 QCAD (main)Bug ReportLow Info fuction returns right dimensions but drawing dimen ...Closed
100%
Task Description

no task description

 1791 QCAD (main)Bug ReportLow Edit > Paste: relative zero point not set Closed
100%
Task Description

If I insert a content from the Clipboard to the drawing a new Relative Zero Point isn’t created.
I’m not able to use e.g. a restriction regarding to the last inserted content. QCAD will use the last Relative Zero Point in the drawing even if I already inserted a content.

Screenshot:
Clipboard content = circle

1. First insert

Restriction horizontal

2. Second insert

 1792 QCAD (main)Bug ReportLow Dimension > Angular: transformations broken Closed
100%
2 Task Description

(I originally described the problem in the forum: https://qcad.org/rsforum/viewtopic.php?f=33&t=5721 )
(The problem was also reproduced by user “Husky” so it not installation specific.)

I have a model where one of the details is as shown in attachment 1

However, when I create a viewport and display the part in the the layout the angular measurement is another. See attachment 2.

In the model it should be noted that the part displayed is a detail copied with a different scale as to Zoom in on a detail in order to put dimensions on it. It was created by copying a part of the model and pasting it back in the model but with 3x zoom.

I have also included the full .dxf file in the hope that it helps you both reproduce and fix this issue

Note: The same problem seems to also produce “ghostlines” in other viewports in the layout which is not present in the model. Removing the angular measurement also removed the ghostline. You can observe the issue by looking at layout2 and you can see a line (dimension layer) going from top right corner of the viewport towards the lower left. This line is not present in the model and appears to be some strange extension to the angular dimension the detail that is just to the top right in the model.

System:
Macbook Pro 15”, OS X 10.13.6

(Can also be reproduced in Linux version)

QCad version:

Version: 3.21.2.0 (3.21.2)
Build Date: Jul 9 2018
Revision: f9cea14
Qt Version: 5.10.0
Architecture: x86_64
Compiler: Clang 8.0.0

 1793 QCAD (main)Bug ReportLow Ruler functionality is compromised by Auto Grid setting Closed
100%
1 Task Description

Regarding to an observation by the forum member Horst1803
http://www.qcad.org/rsforum/viewtopic.php?f=92&t=5725

The ruler functionality is compromised by Graphics View / Grid settings.
To show the full Ruler functionality “Automatic scale grid” has to be activated. I think that is not intended behavior.

Case: Appearance / Show rulers = activated

Application Preferences / Graphics View / Grid

on - Automatically scale grid
on - Automatically scale meta grid
off - Solid grid lines
= Rulers visible
= Graduation visible
= Labels visible

off - Automatically scale grid
on - Automatically scale meta grid
off - Solid grid lines
= Rulers visible
= Graduation invisible
= Labels invisible

 1794 QCAD (main)Bug ReportLow Detect Duplicates / Options / Refresh Icon missing Closed
100%
Task Description

Please see also http://www.qcad.org/rsforum/viewtopic.php?f=32&t=5745

 1795 QCAD (main)Bug ReportVery Low Quit Menu Item disabled after opening preferences Closed
100%
Task Description

Quit Menu Item disabled after opening preferences.

System: OSX 10.13.6
Qcad version: 3.21.2.0

How to repeat:

  1. Open QCad
  2. Open preferences dialogue “QCad Pro → Preferences”
  3. Close dialogue
  4. The menu item “Quit QCad Pro” is now disabled. See attached screenshot

Repeatability: 100%

 1796 QCAD (main)Bug ReportLow File > Open Recent: crash when file is in Google Drive  ...Closed
100%
Task Description

When a file is opened from “File→Open Recent” on QCad Pro it gives a 100% repeatable crash if the file is on a folder synchronized with Google Drive. If the file is opened using “File→Open” instead it works as expected. See attached crash-log.

OSX specific. Does not happen on Linux with synchronized Google Drive folder

System: OSX 10.13.6

QCad version:

Version: 3.21.2.0 (3.21.2)
Build Date: Jul 9 2018
Revision: f9cea14
Qt Version: 5.10.0
Architecture: x86_64
Compiler: Clang 8.0.0

 1797 QCAD (main)Bug ReportLow Keyboard shortcuts not saved between sessions Closed
100%
Task Description

In 3.21.1, and 3.21.2 a change to a shortcut looses all previous shortcut changes.
This does not become apparent in the current session; a modified shortcut works fine together with all the previous modifications, until you close QCAD.
But-
When you re-open QCAD, the only customised shortcut available is the last one that was changed, every other customised keyboard shortcut has gone back to default.

Windows 10 64 , Gigabyte laptop i7 processor

 1798 QCAD (main)Bug ReportVery Low Drawing Pref > Linetype > Scale of linetypes matches th ...Closed
100%
Task Description

“Drawing Preferences / General / Linetype / Scale of linetypes matches the scale of each viewport” is checked by default for new drawings, however the option is not applied until you open the “Drawing Preferences / General / Linetype” screen and click OK – no need to change anything, just opening the screen and clicking OK is sufficient.

 1800 QCAD (main)Bug ReportLow circle/arc intersection bug with line Closed
100%
Task Description

There is a case that qcad do not detect intersection between a circle/arc and a line. Attached is an example.

 1802 QCAD (main)Bug ReportLow Startpoint indication disapears for some entities while ...Closed
100%
Task Description

Having a multi selection and at least one ‘older’ arc the startpoint indication in red of some entities might disappear.

Entities that suffer from this are:
Other arcs
Polyline
Splines

Only the ‘oldest’ arc in selection will have a startpoit indication.
Multi selection of ‘newer’ entities from the list above will not if an ‘older’ arc is part of the selection.
Deselecting de ‘older’ arcs will reveal the startpoints up to the ‘oldest’ arc.

In the file provided entities where drew in order from left to right.
Select all and start deseleting arcs from the left.

The behaviour is affected by changing the draw order property and a save/close/open.
In the second file the rightmost arc was set to draw order 7, the same as the 4th was.
After save/close/open it is renumbered to 8 and the behaviour is different as in the firts file.

Regards

 1804 QCAD (main)Bug ReportVery Low Application Preferences > Tool Settings: Filter for "Vi ...Closed
100%
Task Description

1. Search the Tool Settings for “View” and you will only find “Overlays” without the submenu information.
2. Check View manually without a search will provide the submenu information.

 1805 QCAD (main)Bug ReportLow Modify > Split Entities: broken for logically closed po ...Closed
100%
Task Description

See http://www.qcad.org/rsforum/viewtopic.php?f=31&t=5825&p=21761

 1806 QCAD (main)Bug ReportVery Low Overlay Toolbar visibility in GUI not saved Closed
100%
Task Description

Switch “Overlay” Toolbar to visible below:
View/Toolbars and Widgets/Toolbars/View/Overlays, place the Toolbar in GUI, restart QCAD and the Toolbar is back to invisible.

 1807 QCAD (main)Bug ReportLow The ORDINAL 3906 not found in LIBEAY32.DLL Closed
100%
Task Description

Hello
the message: The ORDINAL 3906 was not found in the LIBEAY32.dll dynamic-link library. is displayed each time QCAD is opened.
How to fix this problem
thanks in advance
cordially**

 1808 QCAD (main)Bug ReportLow Property Editor: Changing width, height, orientation fo ...Closed
100%
Task Description

Property Editor / Size adjustment for Polygon rectangle accepts no changes for Width and Height. Was perfect working till 3.21.2

 1809 QCAD (main)Bug ReportLow Draw > Viewport > Add Viewport: layout dialog combobox  ...Closed
100%
Task Description

Drawing with more than 4 Layout Blocks (Layout1, Layout2 etc),

Add Viewport, choose rectangle for viewport, Dialog pops up to choose a Layout Block,
I choose Layout4 - the Viewport is placed on Layout2,

next new Viewport - placed on Layout3 - the Viewport will be placed again on Layout2 ...

 1819 QCAD (main)Feature RequestLow  Additional Options for "Paste along Entity" Closed
100%
Task Description

Please see:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22098#p22098

 1821 QCAD (main)Feature RequestMedium Export svg with linetype parameter Closed
100%
Task Description

Hi,

as I saw in the svg file and tried it, the ‘stroke-dasharray’ parameter needed (with values) to show the line same as in the editor.

Example:
...

      <!-- Line -->
      <path d="M207452.1773,1518891.8208 L203034.0991,1518891.8208 " style="stroke:#808000;stroke-dasharray:200,300;stroke-width:25;" qs:layer="layer"/>

...

Thanks,
Soma

 1822 QCAD (main)Bug ReportCritical Cannot download old purchased QCAD due to expired link  ...Closed
100%
Task Description

Hi,

I logged in to my account, and checked my order. The link does not work anymore for the purchased item QCAD Pro.
Please help me ow can I download my Pro version QCAD.

Thanks,
Soma

 1825 QCAD (main)Bug ReportLow File > Svg Export: text exported with wrong height Closed
100%
Task Description

If option “Preserve geometry” is activated, texts are exported at a wrong height if the drawing unit is not the same as the SVG output unit.

 1828 QCAD (main)Bug ReportLow Chinese language not loading correctly Closed
100%
Task Description

Most of the Chinese items cannot be shown correctly. But when I check the qm files, the translation are there and the contents are correct.

I’m using the Pro version 3.21.3.0

 1829 QCAD (main)Bug ReportLow Incorrect font weights in macOS 10.14 Mojave Closed
100%
Task Description

See QTBUG-69955 which affects QCAD on Mojave:
https://bugreports.qt.io/browse/QTBUG-69955

 1831 QCAD (main)Bug ReportLow Block > Copy Block: attributes of block references are  ...Closed
100%
1 Task Description

1) Open the attached dxf file
2) Right click on “vne_vent_odvod_ec_3f” block in Block list and select Copy block
3) Choose name
4) Insert reference of this Copy block to the modelspace
5) Save the file
6) Close and reopen the file

RESULT: Attributes of block references included in the original block are missing in the copied block.
Immediately after insertion of the copied block I can see in the property editor, that block reference attributes are not “conected” to the block reference, but they are still visible. They disappear when the file is reopen.

Alternative way I use to copy this kind of blocks without error: Open block I want to copy, Select all entities, reference copy of them, paste to modelspace, select them in modelspace and choose create block.

 1832 QCAD (main)Bug ReportLow Modify > Explode: attributes of block references are or ...Closed
100%
1 Task Description

In a the modelspace I have a block reference of a block(parent), which includes block references (with attributes) of another blocks(child). Than I select this parent block reference and choose Explode. The result is, that the child block references have visible attributes, but they are not connected to the block reference anymore (I can not see them in property editor when the child block is selected). Than when I choose synchronize attributes, new attributes with default values will appear.
I am not sure it his is a bug or expected behavior of the Explode feature.

If it is not a bug, I would like to have new Extract feature, which would copy the content of the selected block reference and immediately insert it exactly to the same place (attributes would be still connected to child references) Extracted block reference would be than removed. Optionally, it could delete the block definition if it is not used anymore in the drawing (but there is already Block Purge feature which will do this).

 1834 QCAD (main)Bug ReportLow Property Editor: Attributes of block reference not show ...Closed
100%
Task Description

- Create block with attributes
- Create block reference
- Select block reference
→ Property editor does not show attributes

 1835 QCAD (main)Bug ReportLow QCAD Professional crashing when trying to open .dwg fil ...Closed
100%
Task Description

Hi I am having an issue with the attached DWG file, when I try to open the file qcad opens then immediately crashes and I am unable to do anything.

Here is the event viewer log:

Faulting application name: qcad.exe, version: 3.21.3.0, time stamp: 0x5b9fbdd3
Faulting module name: MSVCR120.dll, version: 12.0.21005.1, time stamp: 0x524f83ff
Exception code: 0xc0000409
Fault offset: 0x0000000000074a30
Faulting process id: 0x1ad8
Faulting application start time: 0x01d48bbf05480557
Faulting application path: C:\Program Files\QCAD\qcad.exe
Faulting module path: C:\Program Files\QCAD\MSVCR120.dll
Report Id: fa661b18-d0df-41a8-88e9-37c2ea345bcb
Faulting package full name:
Faulting package-relative application ID:

 1839 QCAD (main)Bug ReportHigh Lost in migration Closed
100%
Task Description

Hi Andrew,

I am trying to ‘HP pen plotter’ a test file, created by AutoCAD 10.

Saving the in QCAD loaded file goes fine. However, the tool table is empty now.

Trying to make a new tool 1 Errors it exists already but does not show up in the tool table.

What do I miss?

 1840 QCAD (main)Bug ReportMedium Edit > Paste along entity: endless loop Closed
100%
Task Description

Ich habe im Snapshot 3.21.3.14 unter macOS einen Fehler gefunden, der QCAD in eine Endlosschleife führt, sodaß QCAD nicht mehr antwortet.
Details siehe unter https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6011#p22435

 1842 QCAD (main)Bug ReportLow svg export shows texts in different place Closed
100%
Task Description

Hi,

when I export a dxf draw to svg the text objects shows in a bit different place.

QCAD version is 3.21.3.14

 1845 QCAD (main)Bug ReportLow Block reference points cannot be supressed in printer o ...Closed
100%
Task Description

Drawing preferences have no effect on point type when printed or in print-preview for block reference points.
Notice in “print output”, the “Dot” (Block reference point) is displayed (drawing preferences are ignored).

See attached photos.

 1849 QCAD (main)Bug ReportMedium paste of spline with scaling of 0 crashes application Closed
100%
Task Description

Application crashes when entering 0 in the scale option while pasting a spline.

This is an issue also when entering scale factors of less than 1, as the application immediately crashes when entering the 0 digit.
As a workaround for a scale factor of e.g. 0.5, one can enter 1.5 and then edit the 1 digit to 0.

 1852 QCAD (main)Feature RequestLow Layer state management Closed
100%
Task Description

- Store layer states under a name
- Restore layer states
- Remove layer states object
- Update layer states object

 1853 QCAD (main)Bug ReportLow Duplication of input fields in Property Editor 3.21.3.1 ...Closed
100%
Task Description

look at
https://www.qcad.org/rsforum/viewtopic.php?f=89&p=22762&sid=26fade8dcfd514372faaf98834df4413#p22762

 1854 QCAD (main)Bug ReportLow Build failure due to missing RZip.h Closed
100%
Task Description

Linux, gcc:

make[4]: Entering directory '/home/ice/w/qcad/qcad/src/scripting/ecmaapi'
g++ -c -include release/qcadecmaapi -pipe -O2 -w -D_REENTRANT -fPIC -DQT_DISABLE_DEPRECATED_BEFORE=0x000000 -DQCAD_DLL -DQCADECMAAPI_LIBRARY -DQT_NO_DEBUG -DQT_PLUGIN -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_HELP_LIB -DQT_UITOOLS_LIB -DQT_DESIGNER_LIB -DQT_UIPLUGIN_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_SCRIPT_LIB -DQT_SCRIPTTOOLS_LIB -DQT_SQL_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CORE_LIB -DQDESIGNER_EXPORT_WIDGETS -I. -I../../core -I../../core/math -I../../grid -I../../snap -I../../gui -I../../entity -I../../operations -I../../scripting -I../../stemmer -I. -Igenerated -Iadapters -I../../io/dxf -I../../spatialindex -I../../3rdparty -I/home/ice/w/qcad/qcad/src/zip -isystem /usr/include/x86_64-linux-gnu/qt5 -isystem /usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -isystem /usr/include/x86_64-linux-gnu/qt5/QtSvg -isystem /usr/include/x86_64-linux-gnu/qt5/QtOpenGL -isystem /usr/include/x86_64-linux-gnu/qt5/QtHelp -isystem /usr/include/x86_64-linux-gnu/qt5/QtUiTools -isystem /usr/include/x86_64-linux-gnu/qt5/QtDesigner -isystem /usr/include/x86_64-linux-gnu/qt5/QtUiPlugin -isystem /usr/include/x86_64-linux-gnu/qt5/QtWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtGui -isystem /usr/include/x86_64-linux-gnu/qt5/QtScript -isystem /usr/include/x86_64-linux-gnu/qt5/QtScriptTools -isystem /usr/include/x86_64-linux-gnu/qt5/QtSql -isystem /usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -isystem /usr/include/x86_64-linux-gnu/qt5/QtNetwork -isystem /usr/include/x86_64-linux-gnu/qt5/QtXml -isystem /usr/include/x86_64-linux-gnu/qt5/QtCore -Irelease -isystem /usr/include/libdrm -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -o release/RScriptHandlerEcma.o RScriptHandlerEcma.cpp
In file included from RScriptHandlerEcma.cpp:372:0:
generated/REcmaZip.h:15:26: fatal error: RZip.h: No such file or directory
                 #include "RZip.h"
                          ^~~~~~~~
compilation terminated.
Makefile.Release:3622: recipe for target 'release/RScriptHandlerEcma.o' failed
make[4]: *** [release/RScriptHandlerEcma.o] Error 1

Seems to have been introduced in 854baacb, it seems.

 1855 QCAD (main)Bug ReportLow I cannot print Closed
100%
Task Description

when printing only a white page is generated. Also when pdf generation, a corrupted file is generated. I enclose my dwg file.
Also It takes more than 20 seconds for most of the task, like selecting, zoom in or out, and I own a 16Gb RAM and i7 8Gen processor....
It sucks...

 1856 QCAD (main)Feature RequestLow SVG import: add support for rotate transformations with ...Closed
100%
Task Description

QCAD seems either to mishandle or ignore svg group transformations altogether.

Importing the attached file into QCAD renders the largest polygon (polygon18) to be rotated and misplaced. This is shown in actual.png. The expected result (original Inkscape renedering) is shown in expected.png.

Looking at the code of the original drawing it can be observed there is a transformation applied to the group which polygon18 is in:

 <g
   style="stroke-width:0.35433099;stroke-miterlimit:4;stroke-dasharray:none"
   id="g20"
   transform="rotate(-90,316.66796,298.95141)" >
   <path
      inkscape:connector-curvature="0"
      id="polygon18"
      d="..." />

Removing the ‘transform’ attribute produces virtually identical (erroneous) rendering in Inkscape as well.

 1857 QCAD (main)Bug ReportLow Layer List: current layer not highlighted after collaps ...Closed
100%
Task Description

Hi. This is a layers confusion..

I have layers:

0
v Layer 1
Layer 1a
v Layer 2
Layer 2a

I select (highlight) “Layer 1a” add an entity on “Layer 1a”
I select (highlight) “Layer 2a” add an entity on “Layer 2a”

I then collapse “Layer 2” and then collapse “Layer1” - in that order:

0
> Layer 1
> Layer 2

No layers shown highlighted.

I immediately add a 3rd entity.

I then open “Layer 2” and see that “Layer 2a” is still highlighted.

I then hide “Layer 1”

That third entity that I added is now hidden (as is the first entity that I added in “Layer 1a”) and properties show it is part of “Layer 1”, not “Layer 2a”. Seems like the third entity is added to the top layer that was last collapsed.

Even happens if I collapse “Layer 2” and then immediately expand it. Add an entity and that entity is placed in “Layer 2” even though “Layer 2a” is still highlighted.

I hope this makes sense. Not a huge issue, just a strange UI peculiarity.

Best regards
Hugh
3.21.3.19 and 3.21.3 Windows 10 as updated as possible

 1859 QCAD (main)Bug ReportLow Modify > Stretch: dimension completely inside area not  ...Closed
100%
Task Description

Dimension entities that lay completely within the stretch area are not moved.

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=89&t=6118

 1860 QCAD (main)Bug ReportLow Rendering of nested blocks / use of negative scale fact ...Closed
100%
Task Description

I received an ACAD file for a cinema we’re working on and the handicapped toilets were rotated 180-degrees referenced to everything (so the toilet appears to be in the hallway rather than the restroom. The handicapped toilet is part of a block with the handrails and those are in their proper place, just the toilet is rotated.

I have verified the problem on both MAC and PC versions.

The drawing appears correct in AutoCAD as well as TrueView and other programs that can read AutoCAD (that I’ve checked). This problem seems to be QCAD specific.

 1861 QCAD (main)Bug ReportLow Modify > Stretch: block references inside stretch box a ...Closed
100%
Task Description

I know that I can’t stretch a block in Model space but a block completely inside a Blocks should move. It doesn’t works that way in 3.22.0.3

 1864 QCAD (main)Bug ReportLow File > Print Current View: multiple pages printed Closed
100%
Task Description

Case: My last “Print preview” setting was “Multiple Pages” = 4
QCAD will remember this setting until I change it.

If I then - maybe days later - start a “Print current view” out of my drawing then QCAD will show me the current view on ONE page. Exactly what I expected. If I start the print QCAD will print on FOUR pages regarding to the last “Print preview” setting. Not what I was looking for .... :-(

Now knowing what will happen I launch “Print current view”, see my current view on ONE page, launch the “Drawing preferences”, see that FOUR is the number for pages, doesn’t change anything and cancel the dialog. NOW I can see that FOUR pages are used for the current view print.

That is confusing and it would be nice to have somehow more control over this behavior. ;-)

 1865 QCAD (main)Bug ReportLow Scaling polyline with width by negative factor removes  ...Closed
100%
Task Description
  1. Create polyline with global width (e.g. 10)
  2. Scale polyline by factors X=-1, Y=1
  3. Polyline loses width
 1866 QCAD (main)Bug ReportLow DXF: EXTMIN/EXTMAX interchanged Closed
100%
Task Description

In the attached drawing, the origin is at the lower left, but $EXTMAX 10 = 0, 20 = .66473 and $EXTMIN = 10 = 3.2, 20 = 0

The X value for $EXTMAX should be 3.2
The X value for #EXTMIN should be 0

the following is an excerpt from the file
$EXTMIN
10
3.2
20
0.664730029289
30
0.0

9

$EXTMAX
10
0.0
20
0.0
30
0.0

 1867 QCAD (main)Bug ReportLow Can you provided a worked example for scripting (I can' ...Closed
100%
Task Description

Please can you provided a worked example for scripting (I can’t find anything similar in the Help/Book)?

I have a 2D drawing that has a segmented circle that is divided into 12/16/20 segments etc.

I want to show this in a side 2D view e.g. there are 6/8/10 segments visible to fill in a rectangle.

I can manually calculate the distance to draw vertical “fill” lines by calculating the angle of the end of each segment. With the option to rotate the position of the lines by half/third of a segment.

A simple example with only 2 segments visible, it’s 0, 50% and 100%.
With 4 segments, it’s tan(22.5), tan(45), -tan(45) and 90 degrees that’s approximately 41%, 50%, 59% and 100%.

So the task, is to receive the coordinates of the area e.g. a rectangle, divide the rectangle into unequal smaller rectangles.

I imagine that a 3D program can do this, but I want to do something similar. Perhaps this is more easily applied - I’m new to CAD and QCAD.

 1868 QCAD (main)Bug ReportMedium Reading ellipse from DXF Closed
100%
Task Description

Loading the appended dxf-file should show a circle and an ellipse.
The circle is ok.
The ellipse gets always an ellipse with center at (0|0),
main vertex at (1|0) and ratio of 1.

 1869 QCAD (main)Bug ReportLow QCAD Community startup failure on Linux/Qt 5.10.1 Closed
100%
Task Description

QCAD Community, built from Git HEAD (bf30371), Linux (Ubuntu 18.04 x64), Qt 5.10.1, fresh build on a completely clean, new checkout.

Warning:  QApplication: invalid style override passed, ignoring it.
17:00:05: Debug:    RDxfPlugin::init
17:00:05: Debug:    RScriptsPlugin::init
Warning:  Cannot load translation: "qtbase_en"
Warning:  Cannot load translation: "qt_en"
Warning:  Cannot load translation: "assistant_en"
Warning:  Cannot load translation: "qt_help_en"
Warning:  Qt WebEngine seems to be initialized from a plugin. Please set Qt::AA_ShareOpenGLContexts using QCoreApplication::setAttribute before constructing QGuiApplication.
Warning:  action not found: "Scheme"
Warning:  RScriptHandlerEcma::eval: script engine exception:  "TypeError: Result of expression 'global[defaultActionClass].init' [undefined] is not a function."
Warning:  "<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:522\n<anonymous>(documentInterface = RDocumentInterface(0x55651e9299c0)) at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:472\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:251\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:794\n<global>() at scripts/autostart.js:832"
Warning:  RScriptHandlerEcma::eval: script engine exception:  "TypeError: Result of expression 'global[defaultActionClass].init' [undefined] is not a function."
Warning:  "<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:522\n<anonymous>(documentInterface = RDocumentInterface(0x55651e9299c0)) at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:472\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:251\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:794\n<global>() at scripts/autostart.js:832"
Warning:  At least one uncaught exception:
Warning:  "<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:522\n<anonymous>(documentInterface = RDocumentInterface(0x55651e9299c0)) at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:472\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:251\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:794\n<global>() at scripts/autostart.js:832"
17:00:07: Debug:    "<global>() at 522"

My best guess is this was introduced sometime during last week or thereabouts (i.e. before that, Git HEAD used to work fine).

 1871 QCAD (main)Bug ReportLow View > Block List: Renaming current block does not upda ...Closed
100%
Task Description

Scenario:

launch BE / Edit contents of selected block,
Pencil symbol shows that this block is now in edit mode,
launch Rename Block / rename it, confirm with ok, dialog closes,
renaming doesn’t works, pencil symbol is still on that block,
try to launch rename block again - doesn’t work anymore,
return to main drawing,
if I then select this block it will show the new name in the Property editor but not in the block list,
if I try to open this block within the block list again it doesn’t works,
if I open this block within a double-click in my drawing it will open but the pencil isn’t shown.

Showing tasks 1801 - 1850 of 2030 Page 37 of 41<<First - 35 - 36 - 37 - 38 - 39 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing