|
351 | QCAD (main) | Bug Report | Low | Simple text: position, simple text flag | Closed | |
|
Task Description
Simple text tool does not create simple text but mtext. When changed to simple in property editor, position does not work
|
|
350 | QCAD (main) | Bug Report | Low | Strech function of version 3.0.0 Beta does not work (ha ... | Closed | |
|
Task Description
The stretch function does not work at all. I tried it in the old version 2.2.2 where it worked.
|
|
349 | QCAD (main) | Bug Report | Medium | Cannot open saved files | Closed | |
|
Task Description
Hi Andrew
Using Beta 3 v3 saving files to DXf 2010, DWG 2010, or even 2007 only saves succesfully some times. Most of the time I get a warning dialog stating that “Cannot open file” - no suitable importer found?
Please help
Clive
|
|
348 | QCAD (main) | Feature Request | Low | Dimensions: Inch / Architectural: supporess 0 feet | Closed | |
|
Task Description
Dimensions: Inch / Architectural: supporess 0 feet
|
|
347 | QCAD (main) | Task | Low | Investigate QPainter warnings when running QCAD in -no- ... | Closed | |
|
Task Description
Invastiagte QPainter warnings when running QCAD in -no-gui mode
See forum: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1653&start=45
|
|
346 | QCAD (main) | Feature Request | Low | Set up fixed grid | Closed | |
|
Task Description
Set up fixed grid without any auto scaling or adjusting or meta grid at all.
|
|
345 | QCAD (main) | Bug Report | Low | unit foot: no dotted line | Closed | |
|
Task Description
can’t make a dotted line on a drawing with unit foot.
drawing unit: foot (length taken from a actual architecture plan)
layer settings: as shown in the screen shot
selected line is on layer “dotted”
line types is shown as continues for almost everything
|
|
344 | QCAD (main) | Feature Request | Medium | show warning if someone draws on locked layer | Closed | |
|
Task Description
|
|
343 | QCAD (main) | Bug Report | Medium | 2 drawings in print preview: inconsistencies | Closed | |
|
Task Description
load 2 drawings
switch both into print preview
see attachment
scale combo box shows only “1:1”
switching drawings does not update options tool bar from drawing but drawing from options tool bar
|
|
342 | QCAD (main) | Bug Report | Medium | SIGPIPE QPrinter::init() | Closed | |
|
Task Description
Thread [1] 18993 (Suspended : Signal : SIGPIPE:Broken pipe)
__kernel_vsyscall() at 0xffffe424
send() at 0xb517d5b8
0xacd3d8b2
httpFlushWrite() at 0xacd3dc21
0xacd3fcb8
cupsSendRequest() at 0xacd56470
cupsDoIORequest() at 0xacd56bc7
cupsDoRequest() at 0xacd56f0b
0xacd35d7f
cupsGetDests2() at 0xacd375d5
cupsGetDests() at 0xacd379a3
0xb5ad5153
0xb5a12133
0xb5a28344
0xb5a2b78c
QPrinter::init() at 0xb5a2d4ee
QPrinter::QPrinter() at 0xb5a2f01f
QtScriptShell_QPrinter::QtScriptShell_QPrinter() at 0xb02c9e29
qtscript_QPrinter_static_call() at 0xafe863ba
0xb6bd7f88
0xb6ac7c97
0xb6a91114
0xa95f7580
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,051 0x87d5f9d
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xa970b87d
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,051 0x87d5f9d
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xa9717387
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:786 0x87d4014
RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:782 0x87d3ef8
RScriptHandlerEcma::createActionDocumentLevel() at RScriptHandlerEcma.cpp:873 0x87d4677
RGuiAction::slotTrigger() at RGuiAction.cpp:628 0x8f7a23c
RGuiAction::qt_metacall() at moc_RGuiAction.cpp:86 0x8fc60a9
QMetaObject::metacall() at 0xb5478c83
QMetaObject::activate() at 0xb5489134
QAction::triggered() at 0xb5869d99
QAction::activate() at 0xb586b48f
QToolButton::nextCheckState() at 0xb5da52b2
0xb5cbb61f
QAbstractButton::mouseReleaseEvent() at 0xb5cbb8dc
QToolButton::mouseReleaseEvent() at 0xb5da53ac
QWidget::event() at 0xb58da629
QAbstractButton::event() at 0xb5cba7bf
QToolButton::event() at 0xb5da82ae
QApplicationPrivate::notify_helper() at 0xb5871d7c
QApplication::notify() at 0xb58772c4
QCoreApplication::notifyInternal() at 0xb547215b
QApplicationPrivate::sendMouseEvent() at 0xb5875152
0xb59066b5
QApplication::x11ProcessEvent() at 0xb5905d26
0xb5932f04
g_main_context_dispatch() at 0xb4aee509
0xb4aeed10
g_main_context_iteration() at 0xb4aeefce
QEventDispatcherGlib::processEvents() at 0xb54a2741
0xb5932a55
QEventLoop::processEvents() at 0xb547131d
QEventLoop::exec() at 0xb54715aa
QCoreApplication::exec() at 0xb5473701
qtscript_QCoreApplication_static_call() at 0xb08dc4b7
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xb100cf6b
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:786 0x87d4014
RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:782 0x87d3ef8
RScriptHandler::init() at RScriptHandler.cpp:31 0x8fa7476
main() at main.cpp:228 0x87cd9c9
|
|
341 | QCAD (main) | Bug Report | Medium | PrintPreview: Auto Fit Pages doesn't work as excepted | Closed | |
|
Task Description
load attached drawing
print preview
auto fit pages
shows 2 columns (wrong) and 13 rows (correct), see attachment
|
|
340 | QCAD (main) | Bug Report | Medium | Bitmap export shows selected entities | Closed | |
|
Task Description
|
|
339 | QCAD (main) | Bug Report | Medium | PrintPreview: multi page widget doesn't work anymore | Closed | |
|
Task Description
|
|
338 | QCAD (main) | Bug Report | Medium | PDF export generates an empty document | Closed | |
|
Task Description
→ generates an empty document (or maybe both the lines and the background is white)
Note: After the export ones stays in print preview mode, which is a bit confusing if the command was invoked from the “normal” drawing mode.
|
|
337 | QCAD (main) | Bug Report | Medium | Polylines with arcs export to SVG as lines | Closed | |
|
Task Description
If I create a closed polygon that include arcs or parts of circles, they export to SVG as straight lines.
If I explode the polyline, they export fine.
If I create a solid fill, those arcs export fine.
See attached DXF and SVG output.
This may be a duplicate bug, but my previous bug report vanished.
|
|
336 | QCAD (main) | Bug Report | Low | Tool bars with tools without icon | Closed | |
|
Task Description
Some tool bars (e.g. ‘Block’ tool bar) contain tools without an icon (empty button). Not all tools are available in tool bars.
|
|
335 | QCAD (main) | Feature Request | Low | Drawing preferences: Change font of dimensions | Closed | |
6 |
Task Description
Configure font used for dimensions.
|
|
334 | QCAD (main) | Bug Report | Medium | SVG Export Polygons, arcs converted to straight lines. | Closed | |
|
Task Description
When exporting a drawing to SVG, polygons containing arcs (trimmed circles in this case) are converted to straight lines. If the polygon is exploded first, then it exports correctly. Of course, this isn’t useful if closed polygons are required for the program using the SVG file. Solid hatch fills export correctly. See attached DXF and corresponding SVG export.
|
|
333 | QCAD (main) | Bug Report | Low | Add layer: new layer should be active one | Closed | |
|
Task Description
Add layer: new layer should be active one
|
|
332 | QCAD (main) | Feature Request | Low | Modify - divide should remain active after one use | Closed | |
|
Task Description
1. When selecting the Scissors function, it deactivates after the cut is done. One can therefore not continuously select lines and cut it at the selected point. Each time the function has to be activated from the start.
|
|
331 | QCAD (main) | Bug Report | Low | Snap buttons doubled | Closed | |
|
Task Description
1. For some reason on the Window machine, the snap toolbar buttons are doubled for all functions. I therefore have two buttons for each type of snap and cannot access the bottom snaps unless I undoc the toolbar.
For some reason, this is still fine in the Linux Beta 3. Single buttons like always.
Reported by: koosjr
|
|
330 | QCAD (main) | Bug Report | Low | Text Edit command replaces \U+00B0 with %%[dD] | Closed | |
|
Task Description
when editing text which contains the degree symbol the proper escape sequence is \U+00B0 Qcad 3Beta3 replaces \U+00B0 with %%[dD]
|
|
329 | QCAD (main) | Feature Request | Low | PDF Export: from file menu | Closed | |
|
Task Description
PDF Export: from file menu
|
|
328 | QCAD (main) | Bug Report | Low | Persistent selections | Closed | |
|
Task Description
Preference for persistent selections
|
|
327 | QCAD (main) | Feature Request | Low | Text tool: options tool bar | Closed | |
|
Task Description
Text tool: options tool bar with text, angle, text height.
|
|
326 | QCAD (main) | Feature Request | Low | Print preview: auto center / scale | Closed | |
|
Task Description
Print preview: auto center / scale
|
|
325 | QCAD (main) | Bug Report | Low | Layer renaming: changing name from lower case to upper ... | Closed | |
|
Task Description
Layer renaming: changing name from lower case to upper case
|
|
324 | ECMAScript | Feature Request | Low | SVG export depends on GUI | Closed | |
|
Task Description
SvgExporter.js uses PrintPreview to parse the scale string, and therefore depends on the qt GUI part. That should not make maintenance harder to call RMath directly there? Results seem to match from a first look.
--- SvgExporter.js~ 2011-10-20 14:11:45.527589416 +0200
+++ SvgExporter.js 2011-10-20 14:12:46.277502814 +0200
@@ -1,6 +1,5 @@
include("scripts/library.js");
include("scripts/date.js");
-include("scripts/File/PrintPreview/Print.js");
/**
* File exporter implementation for the SVG format.
@@ -116,7 +115,7 @@
this.svgUnitAbbr = ret[1];
// scale
- this.scale = Print.parseScale(this.scaleStr);
+ this.scale = RMath.parseScale(this.scaleStr);
var bb = this.doc.getBoundingBox();
var size = bb.getSize();
|
|
323 | ECMAScript | Feature Request | Low | Exceptions in headless scripts | Closed | |
|
Task Description
The capability of running headless, ie. without GUI, is a very welcome addition to QCAD. I suggest one more improvement:
When an exception occurs in a script (running from autostart) and no-gui was opted for on the command line, QCAD should not try to bring up the debugger ever (regardless of any preferences), but print the message of the exception and possibly a backtrace instead.
Otherwise all errors will produce the same message…
|
|
322 | QCAD (main) | Bug Report | Low | Line type scaling with print scale factor | Closed | |
|
Task Description
In QCAD 2, line type patterns are scaled according to the print preview drawing scale, also in model space. This is not the case in QCAD 3 and possibly needs a different solution.
Possible solutions:
|
|
321 | QCAD (main) | Task | Low | Add license to ECMAScript files | Closed | |
|
Task Description
Add license header for all ECMAScript files.
|
|
320 | QCAD (main) | Feature Request | Low | CAD Tool Bar: Back button should go back one menu | Closed | |
|
Task Description
CAD Tool Bar: Back button should go back one menu. Possibly use two buttons, one to go back to the previous tool bar, one to go back to the main tool bar.
|
|
319 | QCAD (main) | Bug Report | Medium | Prints as though A4 even though I change paper size in ... | Closed | |
|
Task Description
This continues a problem that occurred in Qcad 2.2/OpenSuse 11.1:
1. The default paper size is always A4. (minor, but annoying)
2. Here is the serious problem: When I change the paper size to, for example tabloid, in File/Drawing Preferences/Page and in Print/Properties, the print job prints as though it were A4. This occurs unless I first go to Yast or Control Center and (as superuser) change the default page size. Other programs (such as Open Office) don’t require this.
The printer is an HP deskjet 9800, and the problem occurs with either CUPS or hplip printing.
I am using Opensuse 11.3 (I haven’t been able to install successfully opensuse 11.4 on my computer), Qcad Version: 3.0 Beta 2 Date: Sep 17 2011 Qt Version: 4.7.3 Edition: Full Version
|
|
318 | QCAD (main) | Bug Report | Low | Text of dimensions label in SVG PG export | Closed | |
|
Task Description
The labels of dimensions in PG exporter are moved half text-height. Thats a bit much, and actually, no such movement looks more true to the display of same in QCAD itself.
--- SvgExporterPG.js.orig 2011-10-15 18:57:29.994666881 +0200
+++ SvgExporterPG.js 2011-10-15 18:57:39.284666834 +0200
@@ -434,7 +434,7 @@
//debugger;
var angle = this.text.getAngle();
//this.text.setAngle(entity.getAngle());
- var offset = RVector.createPolar(this.text.getHeight()/2, angle + Math.PI/2);
+ var offset = RVector.createPolar(0, angle + Math.PI/2);
this.text.move(offset);
this.textColor = entity.getColor();
this.exportText();
|
|
317 | QCAD (main) | Bug Report | Low | Debugger with -always-load-scripts | Closed | |
|
Task Description
Starting qcad Beta 3 with command line argument -always-load-scripts will bring up debugger:
Uncaught exception at /opt/qcad-3.0.0-beta3-prof-linux/scripts/library.js:2: RangeError: Maximum call stack size exceeded. 2 include(”sprintf.js”);
|
|
315 | QCAD (main) | Feature Request | Low | SVG PG export polylines | Closed | |
|
Task Description
Polylines may consist of lines and arcs. The SVG PG exporter writes them as all straight lines. A better mapping than polyline then was path, as is done with arcs now.
|
|
314 | QCAD (main) | Bug Report | Low | Polyline from segments puts result in layer 0 | Closed | |
|
Task Description
A polyline or polygon created from segments always ends up in layer 0, shouldn’t it stay in the same layer as the segments have been?
|
|
313 | QCAD (main) | Feature Request | Low | Isometric grid | Closed | |
|
Task Description
Switch grid from orthogonal to isometric.
|
|
312 | QCAD (main) | Bug Report | Medium | Crash | Closed | |
|
Task Description
Pendant la création d’un plan le logiciel se bloque, puis une boite de dialogue Windows apparait : “QCAD a cessé de fonctionner”. Après validation de la fenêtre le logiciel se ferme et toutes les modifications non enregistrées sont perdues.
When creating a plan software hang, then a dialog window appears: “QCad has stopped working”. After validation of the software window is closed and all unsaved changes are lost.
|
|
311 | QCAD (main) | Bug Report | Medium | Layer locking | Closed | |
|
Task Description
Pendant la réalisation d’un plan le calque 0 s’est verrouillé, impossible de le modifier. En l’enregistrant sous un autre nom le calque 0 est toujours verrouillé.
During the implementation of a plan the layer 0 was locked, impossible to change it. By saving it under another name Layer 0 is always locked.
|
|
310 | QCAD (main) | Feature Request | Low | show/hide grid | Closed | |
|
Task Description
You removed the button to show and hide grid
I cannot find it and when I turn the grid off and on
|
|
309 | QCAD (main) | Bug Report | Very Low | Templates | Closed | |
|
Task Description
Edit–>Application Preferences–>Load/Save–>Templates
click Add, then Cancel ⇒ enabled Down button ⇒ click Down ⇒
Uncaught exception at C:/Program Files/QCAD Professional\scripts/Widgets/DirectoryList/DirectoryList.js:72: Error: QListWidget::insertItem(): could not find a function match; candidates are: insertItem(int row, QListWidgetItem item) insertItem(int row, String label)
|
|
308 | QCAD (main) | Bug Report | High | Cant start V3 beta 2 on debian linux 64bit | Closed | |
|
Task Description
Tried the Beta on Debian 64 bit with the tarball, .. I didn’t want to use installer as I have a working qcad-2.2.2.0-1-prof.linux.x86
steve@dolphin:~/Downloads/qcad-3.0.0-beta2-trial-linux$ uname -a Linux dolphin 2.6.39-2-amd64 #1 SMP Tue Jul 5 02:51:22 UTC 2011 x86_64 GNU/Linux
qcad-2.2.2.0-1-prof.linux.x86
steve@dolphin:~/Downloads/qcad-3.0.0-beta2-trial-linux$ ./qcad-trial #1 SMP Tue Jul 5 02:51:22 UTC 2011 x86_64 ./qcad-trial-bin: error while loading shared libraries: libgthread-2.0.so.0: wrong ELF class: ELFCLASS64 steve@dolphin:~/Downloads/qcad-3.0.0-beta2-trial-linux$
|
|
307 | QCAD (main) | Bug Report | Low | Library Browser DB File Locked | Closed | |
|
Task Description
Handle situation in which DB file is locked (from previous crash, ...).
Currently, the debugger is shown repeatedly.
|
|
306 | QCAD (main) | Bug Report | Medium | Grid can`t be turned off | Closed | |
|
Task Description
Not possible to turn off grid (in application preferencies). In settings looks that accepted (checkbox is unchecked) but in program window is still visible.
|
|
305 | ECMAScript | Feature Request | Low | executing script at terminal command prompt | Closed | |
|
Task Description
Hello. My question is: can I run my script under Linux QCAD using Linux command prompt. Something like this. Print in terminal: “./qcad myscript.qs” And can the script executing without QCAD GUI? I need to make my drawing by printing specific command in linux command prompt without using GUI. So after script end his work I want to have my drawing at destination directory. Thank you.
|
|
304 | QCAD (main) | Feature Request | Medium | invalid hatch area hint | Closed | |
|
Task Description
Trying to build a hatch area sometimes results in “invalid hatch area”. It would be nice if QCAD could give a hint why / where the problem occurs (where is “line too long” or “not closed”).
|
|
303 | QCAD (main) | Bug Report | Low | Hatch with spline boundary | Closed | |
|
Task Description
If spline boundary has fit points, hatch is loaded with visible inaccuracy.
|
|
302 | QCAD (main) | Feature Request | Low | Printer calibration | Closed | |
|
Task Description
Calibrate printer X/Y ratio and possibly scale to allow accurate printing even on inaccurate printers.
|
|
301 | QCAD (main) | Bug Report | Medium | Open an existing DXF file | Closed | |
|
Task Description
When I open a dfx file I have made from AutoCad, QC will open the file fine but then when I try to save it I get a dialog box stating that the drawing was not saved and asks if I have permission or is the disk full. Yes, I have permission and no the disk is not full. Then when I close the dfx file and try to reopen it the second time, QC will not open the file and a dialog box reads “Cannot open file, please check your access rights, the file format and the file extension”
|