QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  ascSummaryStatusProgress
1919QCAD (main)Bug ReportVery LowWrong order XY(Z) for Ordinate Dimension in property ed...Assigned
0%
Task Description

Win7pro Qcad Pro 3.22.1.2

In property editor
properties of an Ordinate Dimension

Without Show Z
DefPoint is displayed in order YX?

With Show Z
Origin is displayed in order XZY?
DefPoint is displayed in order YZX?
LeaderEndPoint is displayed in order ZXY?

Regards

1443QCAD (main)Bug ReportVery LowView > Status Bar remains uncheckedAssigned
0%
Task Description

Status Bar menu remains unchecked even it is toggled on or off

 1581 QCAD (main)Bug ReportVery Low View > Selection Filter: no inputs for property Linetyp ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4876

1905QCAD (main)Bug ReportVery LowView > Property Editor: Changing attribute of block cha...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6367#p23947

 1899 QCAD (main)Bug ReportVery Low View > Auto zoom: zoom to invisible entities in blocks Closed
100%
Task Description

Create and insert a block with entities on layer “0” and layer “1”.

Switch off layer “1”.

Auto zoom zooms to block boundary of all entities, including those on layer “1”.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6336

1719QCAD (main)Bug ReportVery LowUndo on converted drawing leads to wrong label position...Assigned
0%
Task Description

Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.

 1460 QCAD (main)Bug ReportVery Low Two Display Environment --> Problems with Toolboxes and ...Closed
100%
1 Task Description

Hello,

I’m unsing a two display environment and got all Tools and Widgets placed on the second display.
See qcad1.png

There are two problems:

1.) When I open another application on second display, three toolboxes stay on top, the others are behind new application.
See qcad2.png

2.) When I minimize Qcad only the mainwindow will be minimuzed, all the toolboxes and widgets stay on second display also with problem 1.
See qcad3.png

Whould be great, when this issues will be fixed :-)

Thank you very much
Andreas

P.S.: Hope described well, if not, please drop me a reply...

 1191 QCAD (main)Bug ReportVery Low Toolbar: Unnecessary or double divider Closed
100%
Task Description

Yes - it is only cosmetic but it is also stealing space in the Toolbar.

Would be nice to have them removed. ;-)

 1376 QCAD (main)Bug ReportVery Low Tool matrix: missing "X/Y of position" and "Y/X of posi ...Closed
100%
Task Description

There is no “X/Y of position” and “Y/X of position” snap function in Tool matrix.

 287 QCAD (main)Feature RequestVery Low tool bar icon size Closed
100%
Task Description

It would be nice if one could not only change the icon size of the widget panel but also the icon size of the tool bars.

 188 QCAD (main)Feature RequestVery Low The "View List" should be remembered Layers Open and cl ...Closed
100%
Task Description

When I save a view for print i like that wiew remember the layers open and closed.

This feature could be improved with remember print scale, dimension text size and page size

 1223 QCAD (main)Bug ReportVery Low Text: formatting with subscript and font size Closed
100%
Task Description

- enter the text A1 and format the “1” as subscript and with a different font size.
When you click OK, it will be something like: AH3.571431;
I have to manually edit it (source tab) to AH3.57143;S^1;

 1117 QCAD (main)Bug ReportVery Low Text rendering: particular font not rendered properly Closed
100%
Task Description

Font file:
http://dl.dropbox.com/u/4339492/Entypo.dmg

Text not rendered:

(\U+2139)

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3065

 1668 QCAD (main)Bug ReportVery Low Text color of command line unreadable with KDE's Breeze ...Closed
100%
Task Description

I prefer the Breeze Dark color scheme as it find it less stressful on my eyes, however it’s unusable with QCAD where the Command Line prompts and responses are rendered as a very light grey on a white background. I believe the proper fix would be one (or both) of:

  • Make the Command Line area background follow the desktop scheme. (It appears that the text already does so, hence the light text, but since the background doesn’t it becomes unusable.)
  • Provide a configuration option for the text and/or background color used in the Command Line area.

Screen shots are attached showing both Breeze and Breeze Dark schemes.

 309 QCAD (main)Bug ReportVery Low Templates Closed
100%
Task Description

Edit–>Application Preferences–>Load/Save–>Templates

click Add, then Cancel ⇒ enabled Down button ⇒ click Down ⇒

Uncaught exception at C:/Program Files/QCAD Professional\scripts/Widgets/DirectoryList/DirectoryList.js:72: Error: QListWidget::insertItem(): could not find a function match; candidates are: insertItem(int row, QListWidgetItem item) insertItem(int row, String label)

 659 QCAD (main)Bug ReportVery Low Some true type fonts may not be supported Closed
100%
Task Description

Customer reports that TTF called “Magneto” is not shown properly.

 1500 QCAD (main)Bug ReportVery Low Some plugins not built right in debug mode Closed
100%
Task Description

Building current HEAD (5468b69) with:

/usr/local/lib/qt5/bin/qmake \
        QMAKE_CXXFLAGS="-g -ggdb3 -I/usr/local/include" \
        QMAKE_LIBS="-lcxxrt -L/usr/local/lib" \
        -r
make debug
tinky:~/w/qcad/qcad$ ../qcad.sh
Launching QCAD debug
QCAD version  3.15.5.7
RPluginLoader.cpp:67, static QStringList RPluginLoader::getPluginFiles():
11:25:06: Debug:    Ignoring release plugin built in debug mode:  "libqcadexample.so"
RPluginLoader.cpp:67, static QStringList RPluginLoader::getPluginFiles():
11:25:06: Debug:    Ignoring release plugin built in debug mode:  "libtransactionlistener.so"
RDxfPlugin.cpp:9, virtual bool RDxfPlugin::init():
11:25:06: Debug:    RDxfPlugin::init
RDebug.cpp:81, static int RDebug::stopTimer(int, const QString &, int):
11:25:15: Debug:    TIMER:  1038000000 ns ( 1038 ms )  -  "loading add-ons"
RDebug.cpp:81, static int RDebug::stopTimer(int, const QString &, int):
11:25:19: Debug:    TIMER:  18446744073365584320 ns ( 18446744073365 ms )  -  "initializing add-ons"
RScriptHandlerEcma.cpp:1468, static QScriptValue RScriptHandlerEcma::ecmaMessageHandler(QScriptContext *, QScriptEngine *, RS::MessageType):

For whatever reason, libqcadexample.so and libtransactionlistener.so don’t get named _debug.so (which seems to be the cause for the message), while libqcaddxf_debug.so seems to be OK.

The following diff sorts this out, with no apparent ill effect:

diff --git a/support/examples/exampleplugin/exampleplugin.pro b/support/examples/exampleplugin/exampleplugin.pro
index 0c58c56..d72a866 100644
--- a/support/examples/exampleplugin/exampleplugin.pro
+++ b/support/examples/exampleplugin/exampleplugin.pro
@@ -1,7 +1,8 @@
-include(../../../shared.pri)
 CONFIG      += plugin
 TARGET      = $${RLIBNAME}example
 
+include(../../../shared.pri)
+
 TEMPLATE    = lib
 HEADERS     = RExamplePlugin.h
 SOURCES     = RExamplePlugin.cpp
diff --git a/support/examples/transactionlistener/transactionlistener.pro b/support/examples/transactionlistener/transactionlistener.pro
index ed6c84d..7ee9bef 100644
--- a/support/examples/transactionlistener/transactionlistener.pro
+++ b/support/examples/transactionlistener/transactionlistener.pro
@@ -1,7 +1,8 @@
-include(../../../shared.pri)
 CONFIG      += plugin
 TARGET      = transactionlistener
 
+include(../../../shared.pri)
+
 TEMPLATE    = lib
 HEADERS     = TransactionListenerPlugin.h
 SOURCES     = TransactionListenerPlugin.cpp
 560 QCAD (main)Bug ReportVery Low Some parameters changes lost after saving and reopening ...Closed
100%
Task Description

Hi,
First of all, thanks for this wonderful product !

My issue : when I modify (at file level) some parameters like the number of decimals in cotations, or the linethikness of a calc, these modifications are lost after saving and reopening the dxf. It comes back to the default values. It is not the case for the colors for instance.

At your disposal for other informations.
Fred

 491 QCAD (main)Feature RequestVery Low Show keycodes in menus. Closed
100%
Task Description

In the 2.2.2 version was possible to suppress the display keycodes in menus. You can also restore it in version 3?

See attach.

 29 QCAD (main)Feature RequestVery Low Settings migration QCAD 2.x -> 3.0 Closed
100%
Task Description

Take over settings from old, already installed QCAD versions, if possible.

1760QCAD (main)Bug ReportVery LowSelf-crossing polylines can't be cut twice at segment c...Assigned
0%
Task Description

Re-entering dividing problem from  FS#1757 

Divide the poly selecting near segment 1 at the segment crossing.
> A new node is inserted on the crossing and made start and end node.
Divide the poly again selecting near segment 2 at the segment crossing.
> no division appears to be done.

One can’t divide the second segment at the crossing

Presumed intended behaviour like  FS#1750 

Regards

 415 QCAD (main)Bug ReportVery Low SEGFAULT RMainWindowQt::event(), add custom property to ...Closed
100%
Task Description
  • SEGFAULT when trying to add custom string property to a block reference

back trace:

Thread [1] 5622 (Suspended : Signal : SIGSEGV:Segmentation fault)	
	malloc_consolidate() at 0xb50470e8	
	_int_malloc() at 0xb5048743	
	_int_realloc() at 0xb504a2d3	
	realloc() at 0xb504bbd3	
	qRealloc() at 0xb535a864	
	QVectorData::reallocate() at 0xb53c78ac	
	0xb58ddc9f	
	0xb5a3f96e	
	0xb5a361fd	
	0xb5a3989f	
	0xb5a39b1a	
	QRegion::operator+=() at 0xb5a3b283	
	0xb5acf62c	
	QWidgetPrivate::syncBackingStore() at 0xb58ca7e2	
	QWidget::event() at 0xb58daf74	
	QMainWindow::event() at 0xb5d2c6d5	
	RMainWindowQt::event() at RMainWindowQt.cpp:624 0x8e86f7d	
	QApplicationPrivate::notify_helper() at 0xb5871d7c	
	QApplication::notify() at 0xb5875b64	
	QCoreApplication::notifyInternal() at 0xb547215b	
	QCoreApplicationPrivate::sendPostedEvents() at 0xb5473457	
	QCoreApplication::sendPostedEvents() at 0xb547363d	
	0xb54a2344	
	g_main_context_dispatch() at 0xb4aee509	
	0xb4aeed10	
	g_main_context_iteration() at 0xb4aeefce	
	QEventDispatcherGlib::processEvents() at 0xb54a2741	
	0xb5932a55	
	QCoreApplication::processEvents() at 0xb54738e9	
	0xb6930965	
	QScriptEngineAgentPrivate::atStatement() at 0xb6bc297b	
	0xb6a41232	
	0xb6a8d39a	
	0xaa2d721d	
	0xb6a423e3	
	0xb6af06e0	
	0xb6ac201e	
	QScriptValue::call() at 0xb6bd2e67	
	REcmaShellPropertyEditor::updateGui() at REcmaShellPropertyEditor.cpp:1,183 0x8d3b975	
	RPropertyEditor::updateFromDocument() at RPropertyEditor.cpp:226 0x8fb3f7d	
	REcmaShellPropertyEditor::updateFromDocument() at REcmaShellPropertyEditor.cpp:111 0x8d370ba	
	RMainWindow::notifyPropertyListeners() at RMainWindow.cpp:245 0x8f9de71	
	RMainWindowQt::event() at RMainWindowQt.cpp:568 0x8e86eb7	
	QApplicationPrivate::notify_helper() at 0xb5871d7c	
	QApplication::notify() at 0xb5875b64	
	QCoreApplication::notifyInternal() at 0xb547215b	
	QCoreApplicationPrivate::sendPostedEvents() at 0xb5473457	
	QCoreApplication::sendPostedEvents() at 0xb547363d	
	0xb54a2344	
	g_main_context_dispatch() at 0xb4aee509	
	0xb4aeed10	
	g_main_context_iteration() at 0xb4aeefce	
	QEventDispatcherGlib::processEvents() at 0xb54a2741	
	0xb5932a55	
	QEventLoop::processEvents() at 0xb547131d	
	QEventLoop::exec() at 0xb54715aa	
	QCoreApplication::exec() at 0xb5473701	
	qtscript_QCoreApplication_static_call() at 0xb08dc4b7	
	0xb6bd813c	
	0xb6ac1f68	
	0xb6a9164c	
	0xb083e0f4	
	0xb6a44262	
	0xb6a445f7	
	0xb6bb0f92	
	QScriptEngine::evaluate() at 0xb6bba46f	
	RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:790 0x87d5a26	
	RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:786 0x87d591f	
	RScriptHandler::init() at RScriptHandler.cpp:31 0x8fbbbc2	
	main() at main.cpp:256 0x87cf40a	

 38 QCAD (main)Feature RequestVery Low Save / restore, export / import settings Closed
100%
Task Description

Inside the application preference dialog:

  • save settings (asks for a name)
  • restore settings (picked from a list that contains all so far saved settings and some presets)
  • export settings (to a file)
  • import settings (from a file)

Export / import could be useful for companies to synchronize settings.

 1 QCAD (main)Bug ReportVery Low Sample Task Closed
100%
Task Description

This isn’t a real task. You should close it and start opening some real tasks.

1900QCAD (main)Bug ReportVery LowRemote shares initially not accessible.Assigned
0%
Task Description

My data files are stored on network shares (synology) with a GB link. QCAD Pro is run in Admin mode.

While in my Windows browser all remote shares are accessible (Green), in the QCAD file open menu they are initially shown as not accessible (Red). By accessing a specific drawing file in a remote share, the share will open and turn green.

Same behavior using ‘Open recent’. Always the message is given that the requested file does not exist, and the file is wiped from the ‘Recent Open’ list. Only if the share is first accessed through ‘Open’ with a random file, it will turn and a ‘recent open’ file for that share will open.

Drag and Drop from a remote share will never work.

 890 QCAD (main)Bug ReportVery Low Relative zero point mark artifact on print preview Closed
100%
Task Description

The relative zero point mark appears on the print preview screen. I don’t know, if it also gets printed (my printer setup appears to be broken at the moment), but it does not get exported to PDF, so I guess it is only on the print preview.

On a side note, I think that the reset command (qq) should also clear this. The manual states:

The Neutral State of QCAD
Menu:    Edit - Reset
Keycode: QQ

After the start, QCAD is in its neutral state. That means that no special tool is active and QCAD waits for you to click a menu or tool button to start a tool and start doing something.

As there is no relative zero point just after startup, I think it should also not persist a qq.

 1795 QCAD (main)Bug ReportVery Low Quit Menu Item disabled after opening preferences Closed
100%
Task Description

Quit Menu Item disabled after opening preferences.

System: OSX 10.13.6
Qcad version: 3.21.2.0

How to repeat:

  1. Open QCad
  2. Open preferences dialogue “QCad Pro → Preferences”
  3. Close dialogue
  4. The menu item “Quit QCad Pro” is now disabled. See attached screenshot

Repeatability: 100%

 1369 QCAD/CAMBug ReportVery Low qcad-bin is trying to access non-existent /home/andrew Closed
100%
Task Description

I experience long start delays. I’ve trace the problem to the fact that I have autofs automounting my home directories. However, an strace of qcad-bin shows the following:

execve("/opt/ribbonsoft/qcad/qcad-3.12.6/qcad-bin", ["/opt/ribbonsoft/qcad/qcad-3.12.6"...], [/* 87 vars */]) = 0
brk(NULL)                               = 0x1eca000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fd6194ad000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/tls/x86_64/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/tls/x86_64", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/tls/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/tls", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/x86_64/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/x86_64", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib", 0x7fff4722f250) = -1 ENOENT (No such file or directory)

Since there is no “andrew” user here, I have to wait for automount to timeout which takes about 2m and is rather annoying.

 616 QCAD (main)Bug ReportVery Low Qcad 3 logo incorrect Closed
100%
Task Description

Not a major thing in fact, but there is an error in the logo of QCad3.
Surrounded in red in the jpg.

 494 WebsiteBug ReportVery Low QCAD 3 it's also for Apple PPC! Closed
100%
Task Description

In the website → http://www.qcad.org/qcad3.html
lacks compatibility with Leopard 10.5.8 PPC. I chose QCAD for this ... ;-)

 63 QCAD (main)Bug ReportVery Low Property Editor is floated after first start Closed
100%
Task Description

OpenSUSE / Ubuntu / Kubuntu: After the first start, the property editor window is (unless the layer list) floated.

 1042 QCAD (main)Bug ReportVery Low Preferences dialogs: help button shown in dialog header Closed
100%
Task Description

See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2887&view=unread#unread

 1799 QCAD/CAMBug ReportVery Low Postprocessor: sign not forced for negative values roun ...Closed
100%
Task Description

formatValue returns “0” instead of “+0” for negative values that round up to 0 with the configured decimals.

 651 QCAD (main)Feature RequestVery Low Posibility print some layers in color and others in bla ...Closed
100%
Task Description

Qcad3 have the feature to print in 3 ways: color, grey and black.

The missing feature is select some layers to preserve the original color in the black mode of print.

 93 QCAD (main)Feature RequestVery Low Per drawing Quick SVG Export settings Closed
100%
Task Description

A single drawing has an array of options regarding dimension font-size, printout-scale etc. It would be nice to also save Quick SVG Export settings, as can be specified in the Advanced Export Dialogue or in the Application Preferences Dialogue, with each drawing.

 1587 QCAD (main)Bug ReportVery Low PDF export created with wrong date time Closed
100%
Task Description

Hi guys,

when I export my dxf drawing to pdf, the pdf properties shows wrong “created date”. I am in UTC+2, the date shows 2 hours less.
I exported the pdf at 12:24, the attached ps shows 10:24.

BR,
Soma

 1806 QCAD (main)Bug ReportVery Low Overlay Toolbar visibility in GUI not saved Closed
100%
Task Description

Switch “Overlay” Toolbar to visible below:
View/Toolbars and Widgets/Toolbars/View/Overlays, place the Toolbar in GUI, restart QCAD and the Toolbar is back to invisible.

 1583 QCAD (main)Bug ReportVery Low Option / Rotation missing defaults for 15 and 345 degre ...Closed
100%
Task Description

... just cosmetic!

The Option drop down list for rotations (e.g. Paste etc) shows all steps incremental for every 15 degree - but 15 and 345 degree are missing.

I’m happy that we don’t have bigger problems!!! :-)

1788QCAD (main)Feature RequestVery LowNew snap: reference points of a block referencesAssigned
0%
Task Description

I know this was reported and fixed before ...

https://www.qcad.org/bugtracker/index.php?do=details&task_id=843

... but it looks like we have the issue now back with some kind of variation.

If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.

If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.

Edit: New Test drawing:

 897 QCAD (main)Feature RequestVery Low New arc tool Closed
100%
Task Description

While constructing around the lack of “Line tangent to a circle, perpendicular to a line” ( FS#881 ) which I hereby second :)), it struck me that it might be useful to have a tool that finds the center point of an existing circle/ellipse, or possibly more generally, the center point of an existing circular/elliptical arc.

 1759 QCAD (main)SuggestionVery Low Modify // .... selection of entities on locked layer al ...Closed
100%
Task Description

Without any selection.
Entities on a locked layer can be selected after choosing:

Asumed wrong
- Modify DI
- Modify
B2
- Modify D3
- Modify
MT

Questionable
- Modify RM
- Modify
CH
- Modify RN Less severe
- Modify
OF
- Modify OH
- Modify
SS

Regards

 1762 QCAD (main)Bug ReportVery Low Modify // .... selection of entities on locked layer al ...Closed
100%
Task Description

Not served with the degration to ‘Suggestion’  FS#1759 .
Demanded closing  FS#1759  & re-entered

Locking entities (by layer) to avoid selection,eg. nearby,very close by or on the same spot, does not have the intended influence.

Asumed wrong:
- Modify DI
- Modify B2
- Modify D3
- Modify MT
These 4 need a single entity to be selected and selection of a locked entity is allowed.(=questionable)
The action will allways leed to ‘not allowed’.(=correct)

Questionable:
- Modify RM
- Modify CH
- Modify RN
These 3 need a pair of entities.
RM: Selection of a locked limiting entity is allowed (=questionable), enity to trim not.(=correct)
The action will trim unlocked entities to the locked limiter.(=questionable)
CH & RN: Selection of a pair of entities is allowed.(=questionable)
Trimming if ‘trim’ is on will not occur because locked and leeds to ‘not allowed’.(=correct)
The creation of the bevel or rounding on an active locked layer will not occur because locked and leeds to ‘not allowed’.(=correct)
The creation, except for polyline segments (because locked themself), on an active unlocked layer will be done.(=correct)

Less severe but still questionable: (because these don’t necerally act on the locked entities themselves)
- Modify OF
- Modify OH
- Modify SS
OF: Selection of a locked base entity is allowed.(=questionable)
The preview is casted only if the active layer is unlocked.(=correct)
The creation is only done on an active unlocked layer.(=correct)
OH: Selection of a locked base entity is allowed.(=questionable)
Selection of point references from entities on locked layers is allowed.(=questionable)
The preview is casted only if the active layer is unlocked.(=correct)
The creation is only done on an active unlocked layer.(=correct)
SS: Selection of point references from entities on locked layers is allowed.(=questionable)
Strechting is only done for unlocked entities. (=correct)

 490 QCAD (main)Bug ReportVery Low Mac Property Editor Layout problem. Closed
100%
Task Description

With Mac OS X 10.5.8 PPC, in the Property Editor the entries are aligned at the bottom and not in the center. The strange is that in your screenshots on the site everything is correct (http://www.qcad.org/img/qcad3_mac.png). Add a picture for the problem.

 1384 QCAD (main)Bug ReportVery Low Lost Icons in Context Menu Closed
100%
Task Description

When I press ALT + Left mouse click to select overlapping entities - afterwards the icons in the context menu become lost until I restart QCAD again!

1426QCAD (main)Feature RequestVery LowLoad drawings that were open when closing QCAD on start...Assigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4249

 549 QCAD (main)Bug ReportVery Low linewidth seems to be ignored in bitmap export Closed
100%
Task Description

I tried exporting a 297x210mm drawing to png with 2970×2100 pixels, lines had linewidth 2mm and resulting lines in png had only a few pixels (instead of the expected ~20 pixels).

 1275 QCAD (main)Bug ReportVery Low Library browser: path display under Windows Closed
100%
Task Description

It’s wrong URL Librarie on QCAD 3.10

Actually the register is C:/name/etc (wrong write to acces a new library) could’you change the code for write a good URL ( C:\name\...) it’s very important to use QCAD

 1574 QCAD (main)Bug ReportVery Low Layer > Remove: deleting sublayer switches to layer 0 Closed
100%
Task Description

I have set the delete layer preference to make the next layer in the list the current. This will not work for sublayers. After deleting a sublayer the 0 layer will become current.

 1400 QCAD (main)Bug ReportVery Low Layer > Add Layer: layer name not selected by default Closed
100%
Task Description

Text in layer name input with default layer name should be selected by default, so it can be replaced without deleting text first.

 1518 QCAD (main)Bug ReportVery Low Landscape/Portrait gets confused for custom page size Closed
100%
Task Description

Hello

In the Print Preview or Drawing Preferences / Page Settings if I select a Custom size, then landscape/portrait does not really make sense.

For instance, at work we have a laser cutter which uses a printer driver. The bed of the laser is 600 wide by 300 high. When I wanted to cut
something, I created a custom page size of 600×300 and selected Landscape (because it is wider than high)

Strangely, back in the Print Preview, the page is now sized opposite with regards to Portrait / Landscape mode, which was confusing somewhat.

(see pictures attached)

I think that for ‘Custom’ page size in Drawing Preferences, the option of Portrait or Landscape should probably be ghosted

Then, I think that for Portrait / Landscape mode in the Print Preview, it should display the shape most appropriate, rather than just assuming that the document fits the norm:

  1. Taller than Wide for Portrait mode
  2. Wider than Tall for Landscape mode
Showing tasks 1 - 50 of 2010 Page 1 of 411 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing