QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  ascSummaryStatusProgress
 1868 QCAD (main)Bug ReportMedium Reading ellipse from DXF Closed
100%
Task Description

Loading the appended dxf-file should show a circle and an ellipse.
The circle is ok.
The ellipse gets always an ellipse with center at (0|0),
main vertex at (1|0) and ratio of 1.

 258 QCAD (main)Bug ReportMedium RDwgExporter.cpp#190 Closed
100%
Task Description
Debug:    "RDwgServices::printErrorStackTrace: Requires an integer between 1 and 6." 
Fatal:    ASSERT: "false" in file RDwgExporter.cpp, line 190
./qcad: line 3: 24327 Aborted                 LD_LIBRARY_PATH=. ./qcad-bin [email protected]

 688 QCAD (main)Bug ReportMedium QCAD3: Deadlock happens during text operation when one  ...Closed
100%
Task Description

I just use QCAD3 for the first time. I work with OpenSuse 12.2.
After having unpacked the downloaded package, I am able to start QCAD3 with the QCAD command icon.
Check shows that i used the most actual version.
Obviously no further installation steps are necessary.
I am able to draw some lines, etc.
However, when trying to select a font, I recognized that the computer hangs at least for 5 minutes.
The CPU load is about 50%, and i am not able to move the mouse and to do anything else.
During this time, sometimes there is access to disk, sometimes not.
So, in order lo cancel the hanging, i must make a hard system reboot.
Before i have entered the font selection, i have tried to look into the help options.
However, It was not possible to get the FAQs and the QCAD forum, so i am not aware about similar documented problems.
I have looked after similar bugs, using the words ‘text, font’. No similar bugs found.

 435 QCAD (main)Bug ReportMedium QCAD3 RC3 Windows XP - Stretch command does not appear  ...Closed
100%
Task Description

The modify tools → stretch command does not appear to function.

The two attachments contain the source drawing (blackburne_engine_breather_0210A.dxf) and five screen shots (qcad3_rc3_stretch.odt) showing the steps taken to replicate the problem.

I have also performed a similar exercise with a Linux trial version 3.0 RC2 (OpenSuse 11.4) with the same result.

Regards

 461 QCAD (main)Bug ReportMedium QCAD3 rc2 Opening DXF Created by 2.2.2 Block Position I ...Closed
100%
Task Description

When opening a DXF created by 2.2.2 the block entities are sometimes not being drawn in correct position and orientation.

The following is seen on the console (Which I think is related)

Debug: importing entities in block ' “Sw1pwo” '
Warning: RDwgBlockReferenceImporter::import: block reference references invalid block: “*X15”

and also (which is probably not related)
Debug: importing entities in block ' “A$C6329746C” '
Warning: RSpline::updateFromControlPoints: not enough control points: 0
Warning: RSpline::getExploded: invalid spline
Debug: RSpline: knotVector ignored
Debug: RSpline: knots: 11
Debug: RSpline: order: 4
Debug: RSpline: controlPoints: 7
Warning: RSpline::updateFromControlPoints: not enough control points: 0
Warning: RSpline::getExploded: invalid spline
Debug: RSpline: knotVector ignored
Debug: RSpline: knots: 11
Debug: RSpline: order: 4
Debug: RSpline: controlPoints: 7

Drawing file shown.

This could be a bug in 2.2.2, but it would be nice to ensure 3 can pull in old drawings without us having to rework them all.

Any questions james at enrogen dot com.

James

 373 QCAD (main)Bug ReportMedium QCAD3 does not open dxf-files containing ellipses Closed
100%
Task Description

QCAD3 does not open dxf-files containing ellipses!
Error Message: Can’t open file, check fileformat, fileextension, accesrights

 1564 QCAD/CAMBug ReportMedium QCAD/CAM: black main window or main window not painted  ...Closed
100%
Task Description

QCAD/CAM version 3.16.7.1 (snapshot release)

QCAD/CAM version 3.16.7.1 for Ubuntu Linux starts up with a totally black screen with only the title bar showing. By clicking around at the top of the screen I can get the menus to drop down and appear over the blank black screen. That is how I captured all the version information below. QCAD/CAM version: 3.15.5.0 for Ubuntu Linux starts with all the normal screen graphics appearing normally. I labeled this bug report as critical because QCAD/CAM is unusable on Ubuntu Linux, but for me it is not so critical since I can use the Windows version.

Versions
QCAD version: 3.16.7.1
Date: Mar 22 2017
Qt version: 5.8.0
Compiler version: gcc 4.8.1
Build Date: Mar 22 2017
Revision: 17a80fac27c3ae6aa68cd4ee15ffa4f3e2ab0a9a

Architecture: x86_64
OS: Linux
OS version: Unknown

Locale
QCAD locale: en
Name: en_US
Country: 225
Country name: United States
Language: 31
Language name: American English
Script: 7
Script name: Latin
Decimal point: 46
Negative sign: 45
Positive sign: 43
Text direction: 0
System codec: UTF-8

Arguments: /home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/qcad-bin

Plugins
Description=CAM tools.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadcamscripts.so
ID=CAM
License=Proprietary
Name=CAM
NamePostfix=/CAM
PurchaseURL=http://ribbonsoft.com/add-ons/qcadcam-purchase QtVersion=5.8.0
SplashOverride=:/scripts/Cam/splashscreen.png
[email protected]=:/scripts/Cam/[email protected]
URL=http://ribbonsoft.com/add-ons/qcadcam Version=3.16.7.1

FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcaddwg.so
ID=DWG
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
SystemCodePage=0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1 (Teigha® 4.02.2.0)

Description=Import/export support for the DXF format. Based on dxflib.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcaddxf.so
ID=DXF
License=GPLv2+
Name=DXF
QtVersion=5.8.0
URL=http://www.qcad.org Version=3.16.7.1 (dxflib 3.12.2.0)

Description=OpenGL ES 3D display.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadgles3d.so
ID=GLES
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Description=Integrated help browser.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadhelp.so
ID=HELP
License=Proprietary
Name=QCAD Pro
QtVersion=5.8.0
URL=http://www.ribbonsoft.com Version=3.16.7.1

Description=Polygon clipping, boolean polygon operations, path offset.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadpolygon.so
ID=POLYGON
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Description=QCAD Professional tools.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadproscripts.so
ID=PROTOOLS
License=Proprietary
Name=QCAD Pro
NamePostfix= Professional
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Description=Polygon triangulation.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadtriangulation.so
ID=TRIANGULATION
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Environment
LC_TIME=en_US.UTF-8
DESKTOP_SESSION=default
SSH_AGENT_PID=1743
[email protected]=ibus
LOGNAME=dave
QT_ACCESSIBILITY=1
PAPERSIZE=letter
HOME=/home/dave
LC_NUMERIC=en_US.UTF-8
XDG_DATA_DIRS=/usr/share/default:/usr/share/gnome:/usr/local/share/:/usr/share/:/var/lib/snapd/desktop
XDG_VTNR=2
SHELL=/bin/bash
XDG_SEAT=seat0
GIO_LAUNCHED_DESKTOP_FILE=/home/dave/Desktop/Ribbonsoft-qcad.desktop
WINDOWPATH=2
QT_IM_MODULE=ibus
XDG_SESSION_TYPE=x11
XDG_RUNTIME_DIR=/run/user/1000
LC_MEASUREMENT=en_US.UTF-8
LC_TELEPHONE=en_US.UTF-8
XDG_CURRENT_DESKTOP=GNOME
UNICODEMAP_JP=cp932
DEFAULTS_PATH=/usr/share/gconf/default.default.path
LC_PAPER=en_US.UTF-8
XAUTHORITY=/run/user/1000/gdm/Xauthority
LC_ADDRESS=en_US.UTF-8
LC_IDENTIFICATION=en_US.UTF-8
QT_STYLE_OVERRIDE=gtk
LC_NAME=en_US.UTF-8
GIO_LAUNCHED_DESKTOP_FILE_PID=13310
LC_MONETARY=en_US.UTF-8
XDG_SESSION_DESKTOP=default
GTK_MODULES=gail:atk-bridge
XDG_MENU_PREFIX=gnome-
XDG_SESSION_ID=1
QT_LINUX_ACCESSIBILITY_ALWAYS_ON=1
XDG_CONFIG_DIRS=/etc/xdg/xdg-default:/etc/xdg
DISPLAY=:1
LD_LIBRARY_PATH=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64
PWD=/home/dave
USER=dave
SHLVL=1
_=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/qcad-bin
MANDATORY_PATH=/usr/share/gconf/default.mandatory.path
LANG=en_US.UTF-8
SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-S2ePMZG3dG,guid=e590a63ac7ca3b971f776cae58d663c0
GDMSESSION=default
GNOME_DESKTOP_SESSION_ID=this-is-deprecated
SESSION_MANAGER=local/OPA:@/tmp/.ICE-unix/1681,unix/OPA:/tmp/.ICE-unix/1681
USERNAME=dave
PATH=/home/dave/bin:/home/dave/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin

 531 QCAD (main)Bug ReportMedium Qcad stops working after selecting and moving an entity ...Closed
100%
Task Description

I am a new user and bought qcad this afternoon.
Sometimes qcad stops working after selecting and moving an entity. it happens almost every one to two hours. twice until now.
I tried version 2.2.2.0 that didn’t have this problem.

 1951 QCAD (main)Bug ReportMedium QCAD Prof 3.23 does not switch to Finnish keyboard layo ...Closed
100%
Task Description

QCAD Professional 3.23.0 is using en_US keyboard layout although I have a Finnish keyboard on Fedora 29. I have not found a way, how to chance the keyboard definition. In Fedora repositories there is QCAD Community Edition 3.22.1, and keyboard definitions there are working OK. Keyboard layout is following Gnu desktop keyboard selection and can be changed on the fly. Wrong keyboard layout makes working very hard, because almost all special keys are in different places, like colon, semicolon, plus, minus, parentheses, slash etc.

 186 QCAD (main)Bug ReportMedium QCAD not working on Ubuntu 11.04 x64 Closed
100%
Task Description

Qcad Beta in Ubuntu 11.04 x64

'/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/assistant' 
/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/assistant: error while loading shared libraries: libQtHelp.so.4: cannot open shared object file: No such file or directory
[email protected]:~$ '/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/qcad-trial' 
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so

/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so


(<unknown>:4849): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Loading IM context type 'ibus' failed

(<unknown>:4849): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Loading IM context type 'ibus' failed
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so

/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so


(<unknown>:4849): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Loading IM context type 'ibus' failed
application directory:  "/home/gabriel/opt/qcad-3.0.0-beta-trial-linux" 
working path:  "/home/gabriel/opt/qcad-3.0.0-beta-trial-linux" 
library path:  "/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/plugins" 
Debug:    Init script plugins... 
Debug:    TIMER:  26623 ms -  "loading and initializing plugins" 
Warning:  RScriptHandlerEcma::doScript: engine busy: aborting evaluation of script: 

 "scripts/File/NewFile/NewFile.js" 

 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    Creating storage... 
Debug:    Creating spatial index... 
Debug:    Creating document... 
Debug:    Creating MDI child... 
Debug:    Initialize Viewports... 
Debug:    Init graphics view... 
Debug:    Init scrollbars... 
Debug:    Init rulers... 
Debug:    Init idle and default actions... 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Debug:    lock failed:  "EACTION FINISH: scripts/Snap/Auto/Auto.js" 
Debug:    locker:  "NEW" 
Debug:    lock failed:  "EACTION RESUME: scripts/Idle/Reset/Reset.js" 
Debug:    locker:  "NEW" 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Debug:    lock failed:  "EACTION FINISH: scripts/Snap/RestrictOff/RestrictOff.js" 
Debug:    locker:  "NEW" 
Debug:    lock failed:  "EACTION RESUME: scripts/Idle/Reset/Reset.js" 
Debug:    locker:  "NEW" 
Debug:    Show MDI child... 
Debug:    lock failed:  "RMainWindowQt::subWindowActivated" 
Debug:    locker:  "NEW" 
Debug:    Init event handler... 
Debug:    updateScenes... 
Debug:    updateGuiActions... 
Debug:    notifyListenersSlot... 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Debug:    setActiveSubwindow... 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
/usr/lib/gio/modules/libgiobamf.so: clase ELF errónea: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgiobamf.so
/usr/lib/gio/modules/libgvfsdbus.so: clase ELF errónea: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so

(<unknown>:4849): Gtk-WARNING **: Error loading theme icon 'window-close' for stock: No se ha podido cargar el módulo de carga de imágenes: /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed

** (<unknown>:4849): CRITICAL **: murrine_style_draw_render_icon: assertion `base_pixbuf != NULL' failed

(<unknown>:4849): Gtk-CRITICAL **: IA__gtk_style_render_icon: assertion `pixbuf != NULL' failed

(<unknown>:4849): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_pixels: assertion `GDK_IS_PIXBUF (pixbuf)' failed

(<unknown>:4849): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_width: assertion `GDK_IS_PIXBUF (pixbuf)' failed

(<unknown>:4849): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_height: assertion `GDK_IS_PIXBUF (pixbuf)' failed
Segmentation fault
 739 QCAD (main)Bug ReportMedium QCAD fails to open a DXF file generated by itself Closed
100%
Task Description

QCAD does not manage to load an DXF file created by itself (presumably, I don’t remember excactly, could be the last 2.x version). When selecting File ⇒ Open on the file in attachment, QCAD shows a pop-up reporting the following error :

Cannot open file
»‘/home/gillonr/Documents/Projects/Familly/Br.../Chambre Parents/Plans/Plan-PaterNoster.dxf’.
» Please check your access rights, the file format and file extension.

The file permissions are OK, there is no issue of disk space on the volume where the file reside or where the QCAD distribution is installed or at any other critical location. The problem does not happen on other files created with QCAD, so it appears to be data dependent.

The file causing trouble in QCAD can be imported in LibreOffice 3.4.2 w/o reporting errors (but that application does not provide the suitable methods / tools to edit this format...).

(1) Is there a way to activate debugging when reading in data from a DXF ?
(2) Is there some tool (ev. 3rd party) allowing to check that the data is clean ?
(3) Can someone identify the cause of the problem (presumably some data construct or maybe corruption) ?
(4) In case it would turn out that the problem is a QCAD bug, is there a work-around (I need these drawings...).

 993 QCAD (main)Bug ReportMedium QCAD fails to load drawing with message: maximum recurs ...Closed
100%
Task Description

Since today, QCAD fails to load my drawings, with the following error message in the console:

Warning: RBlockReferenceData::getBoundingBox: maximum recursion depth reached: block: “Drukknop”

The block in question is the AREI (Belgian standard for symbols in electrical installations) symbol for a “button” light switch.
It’s a small and simple drawing (see attachment).

I’ve added a lot of these buttons in the drawing since the previous version, but there were some already present, and this never caused problems.

QCAD version: QCAD 3.4.4 Pro for Ubuntu Linux 32bit
System output: see attached file

 61 DocumentationBug ReportMedium QCAD 3 Manual Closed
100%
Task Description

Change the user manual directory / file names from ‘simpletextviewer’ to
‘qcad_user_manual’ and adjust the sources accordingly that the manual can be shown
in the help menu.

We can simply drop the contents of the manual that is checked in and replace
it with a simple note “No manual is available yet for this technology preview of QCAD 3”

 1848 QCAD/CAMFeature RequestMedium PWM Laser Closed
100%
Task Description

Hi Andrew,

I have added a PWM Laser post processor.

You can add it to QCAD’s post processor directory

 319 QCAD (main)Bug ReportMedium Prints as though A4 even though I change paper size in  ...Closed
100%
Task Description

This continues a problem that occurred in Qcad 2.2/OpenSuse 11.1:

1. The default paper size is always A4. (minor, but annoying)

2. Here is the serious problem: When I change the paper size to, for example tabloid, in File/Drawing Preferences/Page and in Print/Properties, the print job prints as though it were A4. This occurs unless I first go to Yast or Control Center and (as superuser) change the default page size. Other programs (such as Open Office) don’t require this.

The printer is an HP deskjet 9800, and the problem occurs with either CUPS or hplip printing.

I am using Opensuse 11.3 (I haven’t been able to install successfully opensuse 11.4 on my computer), Qcad
Version:
3.0 Beta 2
Date:
Sep 17 2011
Qt Version:
4.7.3
Edition:
Full Version

 339 QCAD (main)Bug ReportMedium PrintPreview: multi page widget doesn't work anymore Closed
100%
Task Description
  • the cells are not shown anymore
 341 QCAD (main)Bug ReportMedium PrintPreview: Auto Fit Pages doesn't work as excepted Closed
100%
Task Description
  1. load attached drawing
  2. print preview
  3. auto fit pages
  4. shows 2 columns (wrong) and 13 rows (correct), see attachment
 1929 QCAD (main)Bug ReportMedium Printing Problem - Preview differs from Printout Closed
100%
Task Description

... ? I reported this already some days ago, but the task doesn’t show up in the list? ...

Comparing ‘Drawing’ and ‘Preview’ - o.k.
Comparing ‘Preview’ and ‘Printout’ - NOT o.k. ! Elements are missing
(Rem: in the QCAD sketch itself, the missing elements are in a separate layer; however, anyway - preview should show the same image as the printout !?)

G.W.

 452 QCAD (main)Bug ReportMedium Printing issues OSX Lion Closed
100%
Task Description

When printing a drawing to A3 format on a Canon iX4000 in Qcad 3 RC2 the image is cropped when as if i am trying to print to a A4 page. Setting are correct, however.
(I see a release candidate 3, but where can i download it? Checking versions confirm that i am up-to-date)

 1243 QCAD (main)Bug ReportMedium Printing / PDF Export: points offset Closed
100%
Task Description

Hi !
im’ trying the 3.9.6 base version, and i have found a problem in printing/exporting..

To replicate the bug:
Try to draw a simple form, for ex a circle, and draw a center of this circle using POINT function.

Now if you make a print preview, then CENTER the circle in the page and try to export to pdf or print, the circle and the POINT (center) are ofsetted !!

i have try to make the same operation with 3.9.5 and i have no problem !!!

 5 QCAD (main)Bug ReportMedium print preview: paper disappears on focus out / in Closed
100%
Task Description

when changing the window focus, the paper in the print preview disappears and doesn’t come back anymore

 199 QCAD (main)Bug ReportMedium Print preview scaling distorts model view Closed
100%
Task Description

- Draw a rectangle, say 100 x 100 (I use mm unit, but does it matter?)
1
- Turn on print preview
- Turn off print preview
- OK
2
- Turn on print preview
- Set scale 1/10
- Lines are thicker now, this is good
- Turn off print previw
- Lines stay thick in model view, should that be so?
3
- Set layer 0 to use dash as line-style
- Turn on print preview
- Looks OK
- Set scale 1/10
- Dashes hardly visible, looks almost like a continuous line

In the end of 2,3 a way to reset line width display in model view is to cancel scaling in print preview, ie. turn on print preview, set scale 1:1. I suppose this is a regression since TP1: model view always is unscaled.

The line-width scaling is quite accurate now: Draw two lines 10 mm apart. Set line-width 0.5mm. Set scale 1:20 and the lines exactly touch.

 966 QCAD (main)Bug ReportMedium Print Dialog Print>Properties>Advanced is blank Closed
100%
Task Description

Just started using v.3.4.2 under Linux Mint 14. To begin with I could not print my drawing in color. Worked out that this was due to the default printer setting (driver hpcups 3.12.6) which was Draft Grayscale. My drawing printed in color fine when I changed this. I believe that it ought to be possible to set this from within QCAD, but the dialog “Print>[printer]Properties>Advanced” is blank. Has it been disconnected somehow?

 1047 QCAD (main)Bug ReportMedium Preview does not use drawing settings Closed
100%
Task Description

See forum thread:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2909

 337 QCAD (main)Bug ReportMedium Polylines with arcs export to SVG as lines Closed
100%
Task Description

If I create a closed polygon that include arcs or parts of circles, they export to SVG as straight lines.

If I explode the polyline, they export fine.

If I create a solid fill, those arcs export fine.

See attached DXF and SVG output.

This may be a duplicate bug, but my previous bug report vanished.

 158 QCAD (main)Bug ReportMedium polyline with segment radius mirrored wrong Closed
100%
Task Description
  • see attached drawing
 1348 QCAD (main)Bug ReportMedium Points move during print/PDF-export Closed
100%
Task Description

Points move by a constant offset relative to the rest of the drawing when printing or exporting to PDF.

This is the exact same bug as  FS#1243 , which was reportedly fixed in version 3.9.7 with commit https://github.com/qcad/qcad/commit/9c9d7bbc3fd845b8475ff12a919ad8e86bbaeb1f, but has resurfaced in version 3.12.4 (and possibly earlier versions that I have not tested).

To replicate the bug, create a simple drawing with points and lines then print or export to PDF, and notice that the points have moved relative to the lines or have disappeared off of the page entirely.

Tested with Arch Linux, 64 bit; QCAD version 3.12.4 using the prebuilt binaries supplied from the qcad.org download site.

 1347 QCAD (main)Bug ReportMedium Point style bug. Closed
100%
Task Description

Hi !
i have find another strangeware about points.. if you set a different point style in program options, on the display the style is correct, but when you try to print or export the drawing, the points are printed as default “point” (little black circle).

 179 QCAD (main)Bug ReportMedium pick view got uncaught exception Closed
100%
Task Description
  1. new drawing
  2. draw something
    • menus view → “remove view”, “edit view”, “pick view” are disabled, which is right
  3. add view → dialog pops up
  4. press cancel
    • menus view → “remove view”, “edit view”, “pick view” are enabled now, which is wrong
 
 338 QCAD (main)Bug ReportMedium PDF export generates an empty document Closed
100%
Task Description
  • simple drawing: 1 rectangle, 1 circle
  • File → Export PDF

→ generates an empty document (or maybe both the lines and the background is white)

Note: After the export ones stays in print preview mode, which is a bit confusing if the command was invoked from the “normal” drawing mode.

 1849 QCAD (main)Bug ReportMedium paste of spline with scaling of 0 crashes application Closed
100%
Task Description

Application crashes when entering 0 in the scale option while pasting a spline.

This is an issue also when entering scale factors of less than 1, as the application immediately crashes when entering the 0 digit.
As a workaround for a scale factor of e.g. 0.5, one can enter 1.5 and then edit the 1 digit to 0.

 510 QCAD (main)Bug ReportMedium paste between layers always indicates "locked Layer" Closed
100%
Task Description

1. copy an item from one layer
2. add new layer
3. attempt to paste into new layer

Error message:
“Trying to draw on or modify entities on a locked layer”

The layer is not locked as I can draw into it...
Also tried turning lock “on” and then “off” again; still same message.

 239 QCAD (main)Bug ReportMedium part library unit conversion Closed
100%
Task Description
  • insert part in inch into mm drawing
  • block scale correct, but block reference also scaled
 706 QCAD (main)Bug ReportMedium Part Library not displaying parts Closed
100%
Task Description

When I open the part library, it displays a dialog saying “Updating Index”, after it finishes, none are displayed, and the filesystem bar at the top is empty, clicking on it does nothing.

 1181 QCAD (main)Bug ReportMedium Paper borders displayed wrong on paper unit being chang ...Closed
100%
Task Description

When paper unit being change to other values (other than default “Milimeter” or “None”), the paper borders are wrongly displayed in print preview.
The attachment screenshot images is for example.
1, Edit →Drawing Preferences →Drawing Unit →Pager Unit, choose the value “Centimeter”.
2, Edit →Drawing Preferences →Page →Pager →Paper size, choose the value “ISO A4”.
3, File →Print Preview, the displayed print borders are wrongly displayed as a very narrow rectangle, which is obviously wrong.
Thanks for any help.
Reeve

 608 QCAD (main)Bug ReportMedium Page orientation can not be changed while page preview  ...Closed
100%
Task Description

When in print-preview mode, the page orientation (portrate or landscape) can be changed using its document-preference dialog box, but it does not take effect.

 1241 QCAD (main)Bug ReportMedium Options tool bar fields not editable, no interaction wi ...Closed
100%
Task Description

Likely affects Windows Vista, 7, 8.

See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3588 http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3587

Caused by update from Qt 4.7.4 to Qt 4.8.7

 1733 QCAD (main)Bug ReportMedium Open DXF just written by qcad crashes qcad  Closed
100%
Task Description

I am a new qcad pro user and created a simple drawing and saved as DXF R27 and closed the app. I reopen the app and open that DFX and the app crashes. However, I can import it. I suspect (without any evidence) that the text in the dimension of the drawing is the problem. Perhaps this issue is like #1261

Process: QCAD-Pro [97927]
Path: /Applications/QCAD-Pro.app/Contents/MacOS/QCAD-Pro
Identifier: org.qcad
Version: 3.19 (3.19.2)
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: QCAD-Pro [97927]
User ID: 501

Date/Time: 2018-04-11 18:07:15.937 -0700
OS Version: Mac OS X 10.12.6 (16G1314)
Report Version: 12
Anonymous UUID: 1EBA0D43-4553-C6E8-6F6A-1A9F3992052D

Sleep/Wake UUID: 86FC779B-AD43-426E-9FFA-4AFBFD6EFC8A

 301 QCAD (main)Bug ReportMedium Open an existing DXF file Closed
100%
Task Description

When I open a dfx file I have made from AutoCad, QC will open the file fine but then when I try to save it I get a dialog box stating that the drawing was not saved and asks if I have permission or is the disk full. Yes, I have permission and no the disk is not full.
Then when I close the dfx file and try to reopen it the second time, QC will not open the file and a dialog box reads “Cannot open file, please check your access rights, the file format and the file extension”

 831 QCAD (main)Bug ReportMedium Multiple words of non-english language in Richtext are  ...Closed
100%
1 Task Description

Version - 3.1, binary.

If I “Draw text” with text “aaaa bbbb” - it displays correctly, but when I enter “аааа бббб” (with russian keyboard) - I see that “аааа” and “бббб” are displayed one above other - see screenshot.

The same problem is for imported .dxf file with russian texts in it. Problem makes the solution as a whole actually inusable for (at least, some of) russian users.

 381 QCAD (main)Bug ReportMedium Multiple chice Closed
100%
Task Description

Multiple choice of enteties with “CTRL”+mouseclick is not possible

 520 QCAD (main)Bug ReportMedium move entity from command line is broken on ubuntu 64 bi ...Closed
100%
Task Description

when I try to move an entity via the command line using the mv command the entity does not move to the specified position. it works if i use the mouse. this was fine in rc2 and rc3 ubuntu 64 bit and windows 64 bit machines.

 1978 QCAD (main)Bug ReportMedium Mirror is not Flip Closed
100%
Task Description

Hi Andrew,

Nosing around in the QCAD Reference Manual I noticed a misperception in the Mirror / Flip commands.

 875 QCAD (main)Bug ReportMedium malloc.h is deprecated Closed
100%
Task Description

This concerns the third-party openNURBS project and should probably be reported there, but I failed to find a bug tracker or anything of the sort, so here it goes.

malloc.h is deprecated (it has not been required since at least SUSv2, ratified in 1997). Apparently FreeBSD takes a more explicit stance against the use of it than other systems. The attached patch does away with it in openNURBS (conservatively leaving it in on Linux, but that should not really be neccessary either).

This makes the openNURBS component buildable on FreeBSD (9).

 1164 QCAD (main)Feature RequestMedium make selected layer default parent for new layer Closed
100%
1 Task Description

Hello!

I would like to suggest a small, but yet important improvement to usabilty.

When adding a new layer the currently selected layer should be default for parent layer.

Currently a new layer is by default a top level layer, and so the user has to select the parent layer for each sub-layer, again and again.

Thanks,
Christian

 77 QCAD (main)Bug ReportMedium Linux: Printing crashes Closed
100%
Task Description

Printing segfaults under Linux after the printer dialog is shown.

 183 QCAD (main)Bug ReportMedium Linux CUPS: QPrinter::init() causes SIGPIPE:Broken pipe Closed
100%
Task Description
  • not reproduceable
  • Linux vostro 2.6.37.6-0.7-desktop #1 SMP PREEMPT 2011-07-21 02:17:24 +0200 i686 i686 i386 GNU/Linux
  • openSUSE 11.4 (i586)
  1. new drawing
  2. add new layer
  3. save as DWG
  4. File → Drawing Preferences → crash
/home/martin/workspace/rsframework/debug/qcad-bin [23943]	
	Thread [8] 23992 (Suspended : Container)	
		__kernel_vsyscall() at 0xffffe424	
		poll() at 0xb4f9703e	
		g_poll() at 0xb4b010bb	
		0xb4af0c46	
		g_main_context_iteration() at 0xb4af0fce	
		QEventDispatcherGlib::processEvents() at 0xb54a2741	
		QEventLoop::processEvents() at 0xb547131d	
		QEventLoop::exec() at 0xb54715aa	
		QThread::exec() at 0xb535e8ed	
		0xb544da4b	
		0xb5361b52	
		start_thread() at 0xb5177b05	
		clone() at 0xb4fa1d5e	
	Thread [7] 23954 (Suspended : Container)	
	Thread [6] 23953 (Suspended : Container)	
	Thread [5] 23952 (Suspended : Container)	
	Thread [3] 23950 (Suspended : Container)	
	Thread [2] 23946 (Suspended : Container)	
	Thread [1] 23943 (Suspended : Signal : SIGPIPE:Broken pipe)	
		__kernel_vsyscall() at 0xffffe424	
		send() at 0xb517f5b8	
		0xacd498b2	
		httpFlushWrite() at 0xacd49c21	
		0xacd4bcb8	
		cupsSendRequest() at 0xacd62470	
		cupsDoIORequest() at 0xacd62bc7	
		cupsDoRequest() at 0xacd62f0b	
		0xacd41d7f	
		cupsGetDests2() at 0xacd435d5	
		cupsGetDests() at 0xacd439a3	
		0xb5ad5153	
		0xb5a12133	
		0xb5a28344	
		0xb5a2b78c	
		QPrinter::init() at 0xb5a2d4ee	
		QPrinter::QPrinter() at 0xb5a2f01f	
		QtScriptShell_QPrinter::QtScriptShell_QPrinter() at 0xb02c9e29	
		qtscript_QPrinter_static_call() at 0xafe863ba	
		0xb6bd7f88	
		0xb6ac7c97	
		0xb6a91114	
		0xa7b3a4fd	
		0xb6a44262	
		0xb6a445f7	
		0xb6bb0f92	
		QScriptEngine::evaluate() at 0xb6bba46f	
		RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,015 0x8799f2d	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xa7b8e0f6	
		0xb6a44262	
		0xb6a445f7	
		0xb6bb0f92	
		QScriptEngine::evaluate() at 0xb6bba46f	
		RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,015 0x8799f2d	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xa7b91f81	
		0xb6a44262	
		0xb6a445f7	
		0xb6bb0f92	
		QScriptEngine::evaluate() at 0xb6bba46f	
		RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,015 0x8799f2d	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xa7b91c9f	
		0xb6a44262	
		0xb6a466c9	
		0xb6a8db4a	
		0xa7b9465c	
		0xb6a423e3	
		0xb6af06e0	
		0xb6ac201e	
		QScriptValue::call() at 0xb6bd2e67	
		REcmaShellActionAdapter::beginEvent() at REcmaShellActionAdapter.cpp:149 0x8c5981a	
		RDocumentInterface::setCurrentAction() at RDocumentInterface.cpp:290 0x8ef0094	
		RScriptHandlerEcma::createActionDocumentLevel() at RScriptHandlerEcma.cpp:858 0x8798950	
		RGuiAction::slotTrigger() at RGuiAction.cpp:607 0x8f0e11f	
		RGuiAction::qt_metacall() at moc_RGuiAction.cpp:86 0x8f58cb1	
		QMetaObject::metacall() at 0xb5478c83	
		QMetaObject::activate() at 0xb5489134	
		QAction::triggered() at 0xb5869d99	
		QAction::activate() at 0xb586b48f	
		0xb5d550c0	
		0xb5d5b485	
		QMenu::mouseReleaseEvent() at 0xb5d5d65d	
		QtScriptShell_QMenu::mouseReleaseEvent() at 0xb0272feb	
		QWidget::event() at 0xb58da629	
		QMenu::event() at 0xb5d5aec4	
		QtScriptShell_QMenu::event() at 0xb027621b	
		QApplicationPrivate::notify_helper() at 0xb5871d7c	
		QApplication::notify() at 0xb58772c4	
		QCoreApplication::notifyInternal() at 0xb547215b	
		QApplicationPrivate::sendMouseEvent() at 0xb5875152	
		0xb59068fc	
		QApplication::x11ProcessEvent() at 0xb5905d26	
		0xb5932f04	
		g_main_context_dispatch() at 0xb4af0509	
		0xb4af0d10	
		g_main_context_iteration() at 0xb4af0fce	
		QEventDispatcherGlib::processEvents() at 0xb54a2741	
		0xb5932a55	
		QEventLoop::processEvents() at 0xb547131d	
		QEventLoop::exec() at 0xb54715aa	
		QCoreApplication::exec() at 0xb5473701	
		qtscript_QCoreApplication_static_call() at 0xb08dc4b7	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xb100d9e9	
		0xb6a44262	
		0xb6a445f7	
		0xb6bb0f92	
		QScriptEngine::evaluate() at 0xb6bba46f	
		RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:743 0x8797fbc	
		RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:739 0x8797ea0	
		RScriptHandler::init() at RScriptHandler.cpp:31 0x8f3a8ca	
		main() at main.cpp:176 0x8792007	

 284 QCAD (main)Bug ReportMedium Line Spacing Factor get lost in saved documents Closed
100%
Task Description

When I open a saved document, the “Line Spacing Factor” it return to 1.

Tried several times, same result.

Carlo Couvert

 279 QCAD (main)Bug ReportMedium library.js:638: Error: cannot access member `children'  ...Closed
100%
Task Description
  • QCAD was running during the lunch break
    • one drawing opened in print preview
    • another drawing opened (normal mode)
  • switched to another virtual desktop
""
Uncaught exception at /home/martin/workspace/rsframework/scripts/library.js:638:
Error: cannot access member `children' of deleted QObject
638	        if (!isNull(child.children) && child.children().length != 0) {
qsdb> child
Error: cannot access member `toString' of deleted QObject
qsdb> isNull(child)
true
qsdb> .bt
#0  getWidgets(widget = QToolBar) at /home/martin/workspace/rsframework/scripts/library.js:638
#1  <anonymous>(resume = true) at scripts/File/PrintPreview/PrintPreview.js:235
#2  <anonymous>() at /home/martin/workspace/rsframework/scripts/Idle/../EAction.js:237
#3  <anonymous>() at /home/martin/workspace/rsframework/scripts/File/
PrintPreview/../../Idle/DefaultAction/DefaultAction.js:119
#4  <global>() at -1
 442 QCAD (main)Bug ReportMedium Library incompatible licence Closed
100%
Task Description

Reading  FS#441  I fired up the Library Browser, which works fine here, RC2 from tgz on Ubuntu 10.04, BTW.

The freedxf.com drawings “horseman” and two “women” claim to be “Creative Commons Attribution-NonCommercial-ShareAlike 3.0”. In my opinion, the “NonCommercial” clause does prohibit distribution in QCAD3, which is a commercial package. For a discussion see http://wiki.creativecommons.org/Defining_Noncommercial

Showing tasks 1801 - 1850 of 2010 Page 37 of 41<<First - 35 - 36 - 37 - 38 - 39 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing