|
2106 | QCAD (main) | Bug Report | Low | Version 3.25.0.0 keeps crashing | Closed | |
1 |
Task Description
Whilst using qcad professional today, I have lost hours waiting for the to start working, as it keeps crashing with every command/drawing a line/editing a shape.
Hopefully you can look in to this and advice?
|
|
2109 | QCAD (main) | Bug Report | Low | Dimension > Arc Length: Tool non-responsive | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7542
|
|
2110 | QCAD (main) | Bug Report | Low | Long list of warnings. | Closed | |
|
Task Description
New install of qcad 25.
Warning: RPropertyTypeId::generateId: property already initialized: 7RObject : “” : “Invisible” Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js Warning: old and new property values for property “DIMCLRT” have different types: RColor vs. int Warning: old and new property values for property “DIMCLRT” have different types: int vs. RColor Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js Warning: Unable to detect a web browser to launch ‘https://qcad.org/doc/qcad/3.25.0/reference/en/index.html’ Warning: old and new property values for property “DIMCLRT” have different types: RColor vs. int Warning: old and new property values for property “DIMCLRT” have different types: int vs. RColor Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js /data/installation/qcad 12:02 > /usr/bin/qcad Warning: RPropertyTypeId::generateId: property already initialized: 7RObject : “” : “Invisible” Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js Warning: old and new property values for property “DIMCLRT” have different types: RColor vs. int Warning: old and new property values for property “DIMCLRT” have different types: int vs. RColor Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js Warning: old and new property values for property “DIMCLRT” have different types: RColor vs. int Warning: old and new property values for property “DIMCLRT” have different types: int vs. RColor Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
|
|
2111 | QCAD (main) | Bug Report | Low | PDF-Export does not show the correct line type | Closed | |
|
Task Description
When exporting a drawing into PDF and printing externally the correct linetype is shown by printing from the Model_Space. Printing from Paper_Space the linetype is always continous.
Most recent version of QCad and Win10 64bit
|
|
2112 | QCAD (main) | Bug Report | Low | wrong objects are selected while selecting region with ... | Closed | |
1 |
Task Description
wrong objects are selected while selecting region with mouse. Actions:Trying to select small rectangle area using mouse while holding left mouse button. (ScreenShot_1.jpg) Expected result: only objects inside selection rectangle (text, lines, rectangles) are selected. Factual result: objects inside selection rectangle are selected as well as other objects which are farther away (marked with purple arrows in ScreenShot_2.jpg)
|
|
2114 | QCAD (main) | Bug Report | Low | File > Print: Printout offset under Windows | Closed | |
|
Task Description
See Qt bug 5363: https://bugreports.qt.io/browse/QTBUG-5363
|
|
2115 | QCAD (main) | Suggestion | Low | Move toolbars with negative positions to 0 positions | Assigned | |
|
Task Description
As it can be seen in the attached image, QCAD toolbars may dock to a position slightly outside the visible area of the screen. After having docked there, I have not been able to move them any more. Their current position is just in the middle of the screen.
The position of the toolbars remains the same after the deinstallation of QCAD, shutting down, restarting the computer and reinstalling QCAD. I kindly ask for help.
Kind regards Reinhard
|
|
2116 | QCAD (main) | Bug Report | Low | Rectangle tool seems to ALWAYS select "fill" (and then ... | Closed | |
|
Task Description
I didn’t notice this problem before 3.25.2 but I’m noticing that the rectangle tool defaults to selecting a solid fill. I haven’t found a means to change this default setting. The Polyline tickbox behaves as expected (remembers your last choice).
|
|
2118 | QCAD (main) | Bug Report | Low | Dark mode: disabled menu text distorted | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7596
Windows / Linux
|
|
2119 | QCAD (main) | Bug Report | Low | QCAD/CAM 3.25.2 locks up during startup on lubuntu 18.0 ... | Closed | |
|
Task Description
Upgraded from 3.24.3 to 3.25.2 on lubuntu 18.04 QCAD/CAM hangs during startup, but managed to get it running by renaming libqcadgles3d.so to libqcadgles3d.so.orig. Don’t understand why 3.24.3 still works ok without having to do this. Any suggestions please? Thanks.
|
|
2120 | QCAD (main) | Suggestion | Low | SH - Restrictions for orientation are not working | Closed | |
|
Task Description
Case: launch LI, launch for the first point SH, set to 5 distance, snap to a point, activate Auto snap, (which would work with SD for EH and EV but not for Alt) try to restrict orientation for second point with ALT, EH, EV - it won’t work in this scenario ...
Edit: Playing around ... could it be that RZ is not propperly set within those tools?
|
|
2121 | QCAD (main) | Bug Report | Low | File > Save As: Export as DXF R15 | Closed | |
|
Task Description
Hi,
I have purchased QCAD Pro (3.25.2), the minimum the software can save is R18 when i set at Application Preferences - File - Open/Save.
When i make my drawing and wanted to save to R15, there is notification,
The file format version you are using is not recommended: “R15 [2000/LT2000] DXF drawing [OpenDesign] (*.dxf)”. Custom properties will not be saved. All black entities and layers will be saved as white. All custom colors will be adjusted to the nearest fixed color. Proceed?
I need to save to R15 as my cutting software can only detect R15 drawing at max.
When i save to R15,
My drawing will have 1 line that become a huge circle, making my machine cannot cut as per drawn by me.
Can you help me in solving this R15 issue on QCAD 3.25.2 so that it can save to R15 properly.
|
|
2122 | QCAD (main) | Bug Report | Low | View > Property Editor: Formatting of Negative Values i ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=7633
|
|
2123 | QCAD (main) | Bug Report | Low | File > Print: Crop marks not printed | Closed | |
|
Task Description
Crop marks in Paper_Space are only printed if a Viewport covers the crop mark position.
See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7651
|
|
2124 | QCAD (main) | Bug Report | Low | Hatch solid fill disappears after saving and reopening | Closed | |
|
Task Description
A solid fill hatch works as expected in the attached file and prints OK, but after saving the file and reopening, the hatch has disappeared.
|
|
2125 | QCAD (main) | Bug Report | Low | Text disappears when you zoom | Waiting on User | |
|
Task Description
When I zoom, the text disappears in certain zoom levels after updating to the latest version.
|
|
2127 | QCAD (main) | Feature Request | Low | Snap for predicted intersections while using "Restrict ... | Assigned | |
2 |
Task Description
I would like to request a new kind of snap: a “Restricted Intersection” snap that appears at the point where an entity would intersect with a line drawn from Relative Zero that fulfills the current EL criteria. “Restricted Intersection” snaps would be similar to other Relative Zero-based snaps (like “Perpendicular” and “Tangential”), but would predict the point of the snap from the EL constraints instead of the characteristics of the entity being snapped to. Naturally a value of 0 for angle or length would result in that constraint being ignored.
Additional operational flexibility could be achieved by allowing the snap to exist regardless of whether EL is actually in use. To be useful this would probably require determining snap locations based on angle OR length as opposed to angle AND length.
Implementing this new snap would allow, for example, for easily drawing a line of unknown (but determinable) length at a specified angle between a given point and a given entity (see discussion here), with the “Restricted Intersection” snap ensuring that the endpoint of the new line forms an intersection with the entity in question. Currently the same goal can be achieved a couple of different ways, but they all involve at least two separate steps.
|
|
2128 | QCAD (main) | Feature Request | Low | "Create Library Item" "Save As" dialogue doesn't rememb... | Assigned | |
2 |
Task Description
This is either a bug or a feature request, depending on perspective; my apologies if I’ve picked the wrong one. Additional discussion can be found here.
Steps to reproduce: 1. Create an entity 2. Run “Create Library Item” [BT] 3. Select Reference Point
Expected outcome: “Save As” dialogue opens in the directory that the previous library item was saved in
Actual outcome: “Save As” dialogue opens in ( RSettings.getLaunchPath() + “/libraries” )
Additional Context: The reason I’ve categorized this as a bug is because, relative to the behaviour of the main “Save As” dialogue (which does remember the last directory used) the behaviour of the “Create Library Item” “Save As” dialogue is unexpected.
Software versions: QCAD 3.25.2 Pro Windows 10 Pro
|
|
2129 | QCAD (main) | Bug Report | Low | Info > Polyline Area: Overlapping labels | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7728
|
|
2130 | QCAD (main) | Task | Low | Text: Text dialog removes tabs | Assigned | |
|
Task Description
Text dialog (QTextEdit) strips tabs in toHtml. If tabs can be retained, text entities could support tabs.
|
|
2131 | QCAD (main) | Bug Report | Low | Modify > Clip to Rectangle: fails on xlines | Closed | |
|
Task Description
XLine entities are not split up correctly into rays and a line at the rectangular edge.
|
|
2132 | QCAD (main) | Bug Report | Low | Dimension > Baseline / Continue: custom text label posi ... | Closed | |
1 |
Task Description
To reproduce:
Draw a rectangle.
DH, draw a dimension (the base dimension).
Move that dimension’s text to a new position.
DC, continue that dimension.
The text of the continued dimension will show up on top of that of the base dimension. Expected behaviour would be that it would show up on top of the continued dimension (standard placement).
Please see attached pic.
|
|
2133 | QCAD (main) | Bug Report | Low | Modify > Break out Manual: exception for closed polylin ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7768
|
|
2134 | QCAD (main) | Bug Report | Low | Property Editor, Total Length result incorrect | Closed | |
|
Task Description
Case: Tested with the example drawing provided below: https://www.qcad.org/rsforum/viewtopic.php?f=83&t=7776
If I select every single entity piece by piece with the mouse pointer the total length is correct. If I select everything in once with a rectangular or a polyline selection the total length is incorrect.
|
|
2135 | QCAD (main) | Bug Report | Low | CAM > Nesting: quantity not correct | Closed | |
|
Task Description
Under Linux the quantity is not correctly interpreted.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=7784
|
|
2137 | QCAD (main) | Bug Report | Low | View > Property Editor: Block reference shows propertie ... | Closed | |
|
Task Description
Create block with attribute definition. Create block reference. Edit block and delete attribute definition. Select block reference. > Property editor shows deleted attribute
|
|
2140 | QCAD (main) | Suggestion | Low | Changing navigation mode for mouse wheel doesn't change... | Assigned | |
1 |
Task Description
Looks like error, but may be that’s feature request.
CAD software uses typical navigation behavior as: Wheel = Zoom; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right.
Any other software like browsers, office software (openoffice writer, ms excel and so on), 2d paint software like GIMP (Photoshop and so on) uses other behavior: Wheel = Scroll up/down; Ctrl+Wheel = Zoom; Shift+Wheel = Scroll left/right.
Users, that intensively use CAD and other software simultaneously prefer to make same behavior in their applications switching CAD scroll to plain mouse wheel.
QCAD’s “Application Preferences”: “Graphics View: Navigation”: “Mouse wheel/ two finger swipe”: “Scroll” allow user to assign scroll up/down to wheel mouse instead of Zoom. But there is mistake Ctrl+Wheel didn’t change to Zoom. Ctrl+Wheel continues to scroll up/down, as the wheel. Wheel = Scroll up/down; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right. No zoom!
Draw manipulation at this mode like a hell: you need to use wheel in conjunction with Ctrl/Shift to point draw in desired position, than move your hand to +(-) for make desired zoom.
|
|
2142 | QCAD (main) | Bug Report | Low | Viewports: Cannot snap to reference points of circles / ... | Closed | |
|
Task Description
Reported by CVH
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7868
|
|
2143 | QCAD (main) | Bug Report | Low | Rendering: arcs in scaled up blocks rendered with too l ... | Closed | |
|
Task Description
Create block with arc or circle Insert block with factor 100 Rendering is too coarse
|
|
2145 | QCAD (main) | Bug Report | Low | Modify > Trim Both: closed polyline as either entity br... | Assigned | |
1 |
Task Description
QCAD Professional
Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Use TM by mistake to trim a line to a closed shape. Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7780 File included in the topic. Y1 Original Y2 Faulty use of TM Y3 After ‘Undo’
Husky only ‘could agree on a not proper working undo’ The conditional clause of this sentence is ‘the odd choice’. Blaming this on incompetence. Insight is the best way to get better ... ... but the rest is more an odd choice of tools for this kind of task ...
Again, the MISTAKE was by accident, not intended, in a flick of the wrist ... I didn’t change the trimming method, I simply forgot to ... only once.
The ‘undo’ of my incompetent MISTAKE didn’t returned to how the situation was before I erroneous trimmed with TM. I was simply undoing my erroneous action.
Documented it in 4 quadrants. For this, 4 times on purpose, and not as a consistent ‘odd choice’.
Regards, CVH
|
|
2150 | QCAD (main) | Bug Report | Low | Modify > Stretch: block with attribute not moving | Closed | |
|
Task Description
Create block with attribute definition (attribute definition has lowest draw order in block).
Create block reference from block.
Modify > Stretch with area around block reference.
Block reference does not move.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7895
|
|
2152 | QCAD (main) | Bug Report | Low | Status change for Visibility in Viewports fails | Closed | |
|
Task Description
Status change for Visibility is without any effect on Viewports in Paper_Space.
Case: Entities drawn on a layer in Model_Space. Visibility on/off works. Situation covered with a Viewport, placed in Paper_Space, Edit content launched for that Paper_Space, Visibility on/off doesn’t works.
It was properly working in previos QCAD versions ...
|
|
2153 | QCAD (main) | Bug Report | Low | Freeze program when using text tool | Closed | |
|
Task Description
Using version 3.25.2.4
Add or change text. Inside the rich tab I try to change the text height. The program freezes. Tried with different fonts.
|
|
2154 | QCAD (main) | Bug Report | Low | View > Library Browser: '0' shortcut breaks value enter ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7900
|
|
2156 | QCAD (main) | Suggestion | Low | Add an option to XP preferences to include circles or n ... | Closed | |
1 |
Task Description
Andrew, unrelated to any OS or version.
Circles do explode to polylines with two arc segments. Discussed earlier and very correct because a full circle bulge would be a mathematical limit situation.
When there is no option to ‘Undo’ anymore or when the file was saved & loaded there is no easy way back.
One of the reasons why I isolate circle entities if I might going to use XP as in the file here: https://qcad.org/bugtracker/index.php?do=details&task_id=2155 Even knowing it, I still make more mistakes as I would like.
It would be nice to be able to exclude circle entities from the GUI explosion action XP. Can be simply implemented in the top of Explode.explodeSelection with an extra preference in AppPrefs, default =true.
On the other hand, the explosions of circles used internally in various methods should remain.
Regards, CVH
|
|
2157 | QCAD (main) | Bug Report | Low | Controlpoint Spline exploded to polyline may induce NaN... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Documented in 3.25.2.4, reproducible under 3.25.2.7 In the attached file: → Explode the trial cases and locate NaN Widths. → These faulty widths are cleared while saving and reverting. = work around.
Related Post: https://www.qcad.org/rsforum/viewtopic.php?t=7902#p30902 Related Topic: https://www.qcad.org/rsforum/viewtopic.php?t=7901 Related Commit: https://github.com/qcad/qcad/commit/fcd7929bced7ae328029c1aa2ee2aff2745709c6
Arctic_Eddie reports failing CAM offset at exactly these points !!! Reported is a faulty arc with radius of over 360,000mm. - I can not reproduce this under QCAD working further on the Polys with NaNs. - However the direct offset of such controlpoint Splines is erroneous. (see file in post 30902)
Arctic_Eddie reports arc radii of over 10,000mm. - These don’t seem to be faulty. - I agree that BiArc fitting should be bound to a lower and certainly to an upper limit. - That should be huge otherwise faint curvature is represented by many wobbles or too quick by straight lines. (All this, keeping in mind that QCAD doesn’t return the optimum fitted BiArc, see: https://www.qcad.org/rsforum/viewtopic.php?t=4859)
Regards, CVH
|
|
2158 | QCAD (main) | Bug Report | Low | dwg2bmp: -origin does not export origin | Closed | |
|
Task Description
-origin has no effect, origin is not drawn in export
|
|
2159 | QCAD (main) | Bug Report | Low | Draw > Polyline > Polyline from Selection: may induce N... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32 Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Discovered in 3.25.2.4, reproducible under 3.25.2.7
Draw any open or closed chain of line entities. Select All. OC to Polyline. Step through vertices.
No example file provided because these NaN values are not saved to a file. More pronounced with lines as with arcs. Less pronounced when recombining after an explosion. Some methods clear these to value = void. Some methods clear these to zero (OR). Can also occur when adding segments to an existing polyline with OC.
Regards, CVH
|
|
2160 | QCAD (main) | Bug Report | Low | Draw > Polyline > Relocate Start Point: fails on polyli... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Origin: I like to start my CAM paths at low curvature instead starting at high curvature. Ellipses may explode with the startpoint at the tip. (file Y2)
Documented in 3.25.2.4, reproducible under 3.25.2.7
File included with 4 LayerStates - Original Ellipses: Y1 - Exploded to polylines (32 segments): Y2 - Direct after XP, OR performs different on the left top one: Y3 - Faulty solutions by OR: Y4 (= saved state)
The results may differ with the saved explosions.
With the file. Y1 TA XP Relocate startpoint with OR to an existing reference (called ‘End’)
Regards, CVH
|
|
2161 | QCAD (main) | Feature Request | Low | Make Polyline from Selection (OC) configurable for simp... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Not related to OS, nor version.
The method Polyline from Segments (OC) can be configured for tolerance and simplification in the Options Toolbar. The method Polyline from Selection (OG) has no UI or none showing.
OG retrieves a tolerance from QCAD.ini, what is initially not set:
var tolerance = RSettings.getDoubleValue("PolylineFromSelection/Tolerance", 0.001);
The tolerance will be default = 0.001 similar as the default in AppPrefs. The tolerance setting is included in QCAD.ini after changing the AppPrefs entry.
OG calls PolylineFromSelection.autoJoinSegments with this tolerance:
var counter = PolylineFromSelection.autoJoinSegments(di, tolerance, this);
PolylineFromSelection.autoJoinSegments calls PolylineFromSegments.createPolylineShape with simplification hard coded to true. (last parameter)
// create polyline from line, arc, spline or open polyline entity:
var polyline = PolylineFromSegments.createPolylineShape(
entity, doc, vTolerance, op, undefined,
traversed, callBacks, undefined, true);
I would like to see the simplification optional and default = true.
Regards, CVH
|
|
2162 | QCAD (main) | Suggestion | Low | Update the parameter with simplify of RPolylineData & R... | Assigned | |
1 |
Task Description
Unrelated to OS, nor version
Reported Jun 23, 2020 in: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372
Status Dec 24, 2020: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372#p30955 Documentation is updated. The Classes still refer to an ‘angleTolerance’.
Regards, CVH
|
|
2163 | QCAD (main) | Bug Report | Low | File > SVG Import: parsing path data with implicit sepa ... | Closed | |
|
Task Description
Path data might contain leading zeroes to indicate an implicit separator:
“1 02” should be equivalent with “1 0 2”, not “1 2”.
|
|
2165 | QCAD (main) | Bug Report | Low | Rectangle with Size (RS) doesn't remember Fill, RoundCo ... | Closed | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7900 Report: https://qcad.org/rsforum/viewtopic.php?f=33&t=7900#p30977
Rectangle with Size (RS) doesn’t update the Fill, RoundCorners & Radius settings shared under the [Shape] header in QCAD ini.
Explained as group synchronization while the Polygon methods have more settings in common, although not shared.
In the summary there are more minor issues listed. All have a bar in the Options Toolbar that disappears after the first is drawn.
I rather would opt for all individual settings ... ... or all grouped.
Regards, CVH
|
|
2168 | QCAD (main) | Bug Report | Low | Explosion of a bulging Polyline with Widths may include ... | Closed | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Follow up on: https://www.qcad.org/bugtracker/index.php?do=details&task_id=2023 The zero crossing at 180° turn is fixed.
Found two very minute Line segments where the Width is set zero. Revision dxf included.
Referring to the grid they are rendered about 0.0002 long. They are in the order of 5e-15 and less or simply zero long in this case (<1ULP). Results may vary in length ... and vary after Save/Revert. Files included: PolyWidthErrLargeArc_v2.csv (a/b)
Not encountered on a Polyline with line segments.
Regards, CVH
|
|
2169 | QCAD (main) | Bug Report | Low | Missing G-Code G00 X0 Y0 when placing hole at x0 y0 | Assigned | |
|
Task Description
When placing a hole at x0 y0 there is no G00 x0 y0 in the exported G-Code. So the first cut was made at the current position of the tool, not at x0 y0!
|
|
2170 | QCAD (main) | Bug Report | Low | Draw > Text: Wrong color for formatted text blocks usin ... | Closed | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
File & picture included Work around: Chop it up or use a TTF font
Regards, CVH
|
|
2171 | QCAD (main) | Bug Report | Low | Scaling a block reference should not scale line type pa ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7948
|
|
2172 | QCAD (main) | Feature Request | Low | Modify > Property Painter: Add alpha property for hatch ... | Closed | |
2 |
Task Description
The alpha property is a new feature. Now that we are using it it can be added to tools like the “Property Painter”.
|
|
2173 | QCAD (main) | Feature Request | Low | View > Selection Filter: Add alpha property for hatches | Assigned | |
2 |
Task Description
Add alpha property to filter for hatches.
|
|
2174 | QCAD (main) | Bug Report | Low | [SOLVED] Numerous shortcomings when exploding Polylines... | Assigned | |
1 |
Task Description
QCAD Professional Windows 7, Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Issues most likely unrelated to OS and installations before 3.25. Related post: https://qcad.org/rsforum/viewtopic.php?&t=7982
Flaws documented in full in attached dxf. The dxf has meaningful Layer States.
4 Columns: - Prior Art - The test cases - Actual results - Results with proposed fix
Tried as many things as I can come up with. Orange: Flaws Red: Errors Green: Good results (or as good as I can get them)
Solution(s) given in attached script explode.js (I am just a simple guy and wouldn’t know how to file a pull request on GitHub ......)
In section: “explode polyline into line and arc segments” group: “if (RPolyline.hasProxy() && polyline.hasWidths()) {....}” All additions, updates & typos are marked with “CVH”, one can textual search for it. Over-documented for sure. Any Eaction is to debug in Windows and is obsolete.
Included PreferencesPage.ui is updated for the all Splines from Text fix Still in consideration: Forcing cubic splines from text to degree 2 ... ... I am rather convinced ...
CVH
|