QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  descSummaryStatusProgress
 1604 QCAD (main)Bug ReportLow  Exploding splines has equal results disregarding the s ...Closed
100%
Task Description

The explode function preference ‘Spline Segments’ has no influence on the created number of polyline segments any more.

Attached is a file with an example.
The same spline exploded with setting 2-4-8 & 128 segments.
Result for the indicated spline is 59 and constant.

 655 QCAD (main)Bug ReportLow  Changing Minimal grid spacing option (px) - proves no ...Closed
100%
Task Description

Changing the Minimal grid spacing (px) proves non effective, in that - it does not reduce the number of steps to to reach target view!

Tested and agreed on Win 7 -64

See Topics:

http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&p=6691#p6691

and related - http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&p=6694#p6694

 1819 QCAD (main)Feature RequestLow  Additional Options for "Paste along Entity" Closed
100%
Task Description

Please see:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22098#p22098

 1919 QCAD (main)Bug ReportVery Low Wrong order XY(Z) for Ordinate Dimension in property ed ...Closed
100%
Task Description

Win7pro Qcad Pro 3.22.1.2

In property editor
properties of an Ordinate Dimension

Without Show Z
DefPoint is displayed in order YX?

With Show Z
Origin is displayed in order XZY?
DefPoint is displayed in order YZX?
LeaderEndPoint is displayed in order ZXY?

Regards

1443QCAD (main)Bug ReportVery LowView > Status Bar remains uncheckedAssigned
0%
Task Description

Status Bar menu remains unchecked even it is toggled on or off

 1581 QCAD (main)Bug ReportVery Low View > Selection Filter: no inputs for property Linetyp ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4876

1905QCAD (main)Bug ReportVery LowView > Property Editor: Changing attribute of block cha...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6367#p23947

 1899 QCAD (main)Bug ReportVery Low View > Auto zoom: zoom to invisible entities in blocks Closed
100%
Task Description

Create and insert a block with entities on layer “0” and layer “1”.

Switch off layer “1”.

Auto zoom zooms to block boundary of all entities, including those on layer “1”.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6336

2097QCAD (main)Bug ReportVery LowVery hard to snap to baseline reference point of dimens...Assigned
0%
Task Description

With default autosnap settings reference points included I find it very hard to snap to the baseline reference points of a dimension.
I manage to do it by setting snap to reference point only and zoom out till I see the entire dimension element.

 2151 QCAD (main)Bug ReportVery Low Update viewport on Layout after Layer property change Closed
100%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

With the attached file:
Viewing Layout1
Changing ON/OFF or Frozen state of layers in the Layer List

The view doesn’t update immediate.
Selecting an entity: Yes
After QQ Yes
Switching to another Application and reverting the focus back to QCAD: Yes
Using zoom / pan or the Zoom functions: No
Changing the display modes: Yes
Starting an action: No

 2219 ECMAScriptTaskVery Low Update simple_create.js addSimpleText() Closed
100%
1 Task Description

Andrew,

Reading:
https://www.qcad.org/rsforum/viewtopic.php?&t=8286

Can you update addSimpleText() as Text.Width is fixed =100

What is the noTextWidth value?

As far as I can detect ...
PrintPreviewImplPro.prototype.addDecorations uses value 1.
CrankWheel.js uses value 1.
ExText.prototype.beginEvent uses value 2.
ExDrawFonts.prototype.beginEvent uses value 1.
Counter.prototype.getOperation uses QCAD.ini or default zero.
TextAlong.prototype.getTextData usses the width of the textData from the dialog.

Regards,
CVH

2011QCAD Community EditionSuggestionVery LowUpdate QCAD CE SpatialIndex module to latest versionAssigned
0%
Task Description

Building with the bundled version, 1.8.5, works fine.

When I try to build using the system version, which for Mageia Cauldron is 1.9.3, the build fails.

https://raw.githubusercontent.com/kekePower/mmbl/master/qcad/2019/12/11/20%3A13%3A48/log.qcad

Here is the current spec file for version 3.23.0.4.
https://svnweb.mageia.org/packages/cauldron/qcad/current/SPECS/qcad.spec?revision=1465894&view=markup

It looks like qcad is incompatible with versions above 1.8.5.

Are there plans to port to the new version?

Thanks in advance.

1719QCAD (main)Bug ReportVery LowUndo on converted drawing leads to wrong label position...Assigned
0%
Task Description

Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.

 1460 QCAD (main)Bug ReportVery Low Two Display Environment --> Problems with Toolboxes and ...Closed
100%
1 Task Description

Hello,

I’m unsing a two display environment and got all Tools and Widgets placed on the second display.
See qcad1.png

There are two problems:

1.) When I open another application on second display, three toolboxes stay on top, the others are behind new application.
See qcad2.png

2.) When I minimize Qcad only the mainwindow will be minimuzed, all the toolboxes and widgets stay on second display also with problem 1.
See qcad3.png

Whould be great, when this issues will be fixed :-)

Thank you very much
Andreas

P.S.: Hope described well, if not, please drop me a reply...

 1191 QCAD (main)Bug ReportVery Low Toolbar: Unnecessary or double divider Closed
100%
Task Description

Yes - it is only cosmetic but it is also stealing space in the Toolbar.

Would be nice to have them removed. ;-)

 1376 QCAD (main)Bug ReportVery Low Tool matrix: missing "X/Y of position" and "Y/X of posi ...Closed
100%
Task Description

There is no “X/Y of position” and “Y/X of position” snap function in Tool matrix.

 287 QCAD (main)Feature RequestVery Low tool bar icon size Closed
100%
Task Description

It would be nice if one could not only change the icon size of the widget panel but also the icon size of the tool bars.

2248QCAD (main)Bug ReportVery LowThemes: east and west dock widget tabs facing the wrong...Assigned
0%
1 Task Description

Hi Andrew

In QcadCAM when using the new Themes or User Created Themes the Layer and Block Tabs Appear to be reversed in East and West Positions.
I have discussed this with forum user PeteVick and he cannot reproduce this behavior in Qcad Pro... he suggested submitting this bug report.
I didn’t notice this until he pointed it out and don’t expect it to be high on your list of things to do..

Best Regards
John Hyslop
PS We are both using Linux Mint 20.1 (64bit) which is based on Ubuntu

 188 QCAD (main)Feature RequestVery Low The "View List" should be remembered Layers Open and cl ...Closed
100%
Task Description

When I save a view for print i like that wiew remember the layers open and closed.

This feature could be improved with remember print scale, dimension text size and page size

 1223 QCAD (main)Bug ReportVery Low Text: formatting with subscript and font size Closed
100%
Task Description

- enter the text A1 and format the “1” as subscript and with a different font size.
When you click OK, it will be something like: AH3.571431;
I have to manually edit it (source tab) to AH3.57143;S^1;

 1117 QCAD (main)Bug ReportVery Low Text rendering: particular font not rendered properly Closed
100%
Task Description

Font file:
http://dl.dropbox.com/u/4339492/Entypo.dmg

Text not rendered:

(\U+2139)

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3065

 1668 QCAD (main)Bug ReportVery Low Text color of command line unreadable with KDE's Breeze ...Closed
100%
Task Description

I prefer the Breeze Dark color scheme as it find it less stressful on my eyes, however it’s unusable with QCAD where the Command Line prompts and responses are rendered as a very light grey on a white background. I believe the proper fix would be one (or both) of:

  • Make the Command Line area background follow the desktop scheme. (It appears that the text already does so, hence the light text, but since the background doesn’t it becomes unusable.)
  • Provide a configuration option for the text and/or background color used in the Command Line area.

Screen shots are attached showing both Breeze and Breeze Dark schemes.

 309 QCAD (main)Bug ReportVery Low Templates Closed
100%
Task Description

Edit–>Application Preferences–>Load/Save–>Templates

click Add, then Cancel ⇒ enabled Down button ⇒ click Down ⇒

Uncaught exception at C:/Program Files/QCAD Professional\scripts/Widgets/DirectoryList/DirectoryList.js:72: Error: QListWidget::insertItem(): could not find a function match; candidates are: insertItem(int row, QListWidgetItem item) insertItem(int row, String label)

 2180 QCAD (main)Feature RequestVery Low Surface area off a hatch Closed
100%
1 Task Description

That would ease this task:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=8000

Correct surface area included.
CVH

 659 QCAD (main)Bug ReportVery Low Some true type fonts may not be supported Closed
100%
Task Description

Customer reports that TTF called “Magneto” is not shown properly.

 1500 QCAD (main)Bug ReportVery Low Some plugins not built right in debug mode Closed
100%
Task Description

Building current HEAD (5468b69) with:

/usr/local/lib/qt5/bin/qmake \
        QMAKE_CXXFLAGS="-g -ggdb3 -I/usr/local/include" \
        QMAKE_LIBS="-lcxxrt -L/usr/local/lib" \
        -r
make debug
tinky:~/w/qcad/qcad$ ../qcad.sh
Launching QCAD debug
QCAD version  3.15.5.7
RPluginLoader.cpp:67, static QStringList RPluginLoader::getPluginFiles():
11:25:06: Debug:    Ignoring release plugin built in debug mode:  "libqcadexample.so"
RPluginLoader.cpp:67, static QStringList RPluginLoader::getPluginFiles():
11:25:06: Debug:    Ignoring release plugin built in debug mode:  "libtransactionlistener.so"
RDxfPlugin.cpp:9, virtual bool RDxfPlugin::init():
11:25:06: Debug:    RDxfPlugin::init
RDebug.cpp:81, static int RDebug::stopTimer(int, const QString &, int):
11:25:15: Debug:    TIMER:  1038000000 ns ( 1038 ms )  -  "loading add-ons"
RDebug.cpp:81, static int RDebug::stopTimer(int, const QString &, int):
11:25:19: Debug:    TIMER:  18446744073365584320 ns ( 18446744073365 ms )  -  "initializing add-ons"
RScriptHandlerEcma.cpp:1468, static QScriptValue RScriptHandlerEcma::ecmaMessageHandler(QScriptContext *, QScriptEngine *, RS::MessageType):

For whatever reason, libqcadexample.so and libtransactionlistener.so don’t get named _debug.so (which seems to be the cause for the message), while libqcaddxf_debug.so seems to be OK.

The following diff sorts this out, with no apparent ill effect:

diff --git a/support/examples/exampleplugin/exampleplugin.pro b/support/examples/exampleplugin/exampleplugin.pro
index 0c58c56..d72a866 100644
--- a/support/examples/exampleplugin/exampleplugin.pro
+++ b/support/examples/exampleplugin/exampleplugin.pro
@@ -1,7 +1,8 @@
-include(../../../shared.pri)
 CONFIG      += plugin
 TARGET      = $${RLIBNAME}example
 
+include(../../../shared.pri)
+
 TEMPLATE    = lib
 HEADERS     = RExamplePlugin.h
 SOURCES     = RExamplePlugin.cpp
diff --git a/support/examples/transactionlistener/transactionlistener.pro b/support/examples/transactionlistener/transactionlistener.pro
index ed6c84d..7ee9bef 100644
--- a/support/examples/transactionlistener/transactionlistener.pro
+++ b/support/examples/transactionlistener/transactionlistener.pro
@@ -1,7 +1,8 @@
-include(../../../shared.pri)
 CONFIG      += plugin
 TARGET      = transactionlistener
 
+include(../../../shared.pri)
+
 TEMPLATE    = lib
 HEADERS     = TransactionListenerPlugin.h
 SOURCES     = TransactionListenerPlugin.cpp
 560 QCAD (main)Bug ReportVery Low Some parameters changes lost after saving and reopening ...Closed
100%
Task Description

Hi,
First of all, thanks for this wonderful product !

My issue : when I modify (at file level) some parameters like the number of decimals in cotations, or the linethikness of a calc, these modifications are lost after saving and reopening the dxf. It comes back to the default values. It is not the case for the colors for instance.

At your disposal for other informations.
Fred

 491 QCAD (main)Feature RequestVery Low Show keycodes in menus. Closed
100%
Task Description

In the 2.2.2 version was possible to suppress the display keycodes in menus. You can also restore it in version 3?

See attach.

 29 QCAD (main)Feature RequestVery Low Settings migration QCAD 2.x -> 3.0 Closed
100%
Task Description

Take over settings from old, already installed QCAD versions, if possible.

 1760 QCAD (main)Bug ReportVery Low Self-crossing polylines can't be cut twice at segment c ...Closed
100%
Task Description

Re-entering dividing problem from  FS#1757 

Divide the poly selecting near segment 1 at the segment crossing.
> A new node is inserted on the crossing and made start and end node.
Divide the poly again selecting near segment 2 at the segment crossing.
> no division appears to be done.

One can’t divide the second segment at the crossing

Presumed intended behaviour like  FS#1750 

Regards

 415 QCAD (main)Bug ReportVery Low SEGFAULT RMainWindowQt::event(), add custom property to ...Closed
100%
Task Description
  • SEGFAULT when trying to add custom string property to a block reference

back trace:

Thread [1] 5622 (Suspended : Signal : SIGSEGV:Segmentation fault)	
	malloc_consolidate() at 0xb50470e8	
	_int_malloc() at 0xb5048743	
	_int_realloc() at 0xb504a2d3	
	realloc() at 0xb504bbd3	
	qRealloc() at 0xb535a864	
	QVectorData::reallocate() at 0xb53c78ac	
	0xb58ddc9f	
	0xb5a3f96e	
	0xb5a361fd	
	0xb5a3989f	
	0xb5a39b1a	
	QRegion::operator+=() at 0xb5a3b283	
	0xb5acf62c	
	QWidgetPrivate::syncBackingStore() at 0xb58ca7e2	
	QWidget::event() at 0xb58daf74	
	QMainWindow::event() at 0xb5d2c6d5	
	RMainWindowQt::event() at RMainWindowQt.cpp:624 0x8e86f7d	
	QApplicationPrivate::notify_helper() at 0xb5871d7c	
	QApplication::notify() at 0xb5875b64	
	QCoreApplication::notifyInternal() at 0xb547215b	
	QCoreApplicationPrivate::sendPostedEvents() at 0xb5473457	
	QCoreApplication::sendPostedEvents() at 0xb547363d	
	0xb54a2344	
	g_main_context_dispatch() at 0xb4aee509	
	0xb4aeed10	
	g_main_context_iteration() at 0xb4aeefce	
	QEventDispatcherGlib::processEvents() at 0xb54a2741	
	0xb5932a55	
	QCoreApplication::processEvents() at 0xb54738e9	
	0xb6930965	
	QScriptEngineAgentPrivate::atStatement() at 0xb6bc297b	
	0xb6a41232	
	0xb6a8d39a	
	0xaa2d721d	
	0xb6a423e3	
	0xb6af06e0	
	0xb6ac201e	
	QScriptValue::call() at 0xb6bd2e67	
	REcmaShellPropertyEditor::updateGui() at REcmaShellPropertyEditor.cpp:1,183 0x8d3b975	
	RPropertyEditor::updateFromDocument() at RPropertyEditor.cpp:226 0x8fb3f7d	
	REcmaShellPropertyEditor::updateFromDocument() at REcmaShellPropertyEditor.cpp:111 0x8d370ba	
	RMainWindow::notifyPropertyListeners() at RMainWindow.cpp:245 0x8f9de71	
	RMainWindowQt::event() at RMainWindowQt.cpp:568 0x8e86eb7	
	QApplicationPrivate::notify_helper() at 0xb5871d7c	
	QApplication::notify() at 0xb5875b64	
	QCoreApplication::notifyInternal() at 0xb547215b	
	QCoreApplicationPrivate::sendPostedEvents() at 0xb5473457	
	QCoreApplication::sendPostedEvents() at 0xb547363d	
	0xb54a2344	
	g_main_context_dispatch() at 0xb4aee509	
	0xb4aeed10	
	g_main_context_iteration() at 0xb4aeefce	
	QEventDispatcherGlib::processEvents() at 0xb54a2741	
	0xb5932a55	
	QEventLoop::processEvents() at 0xb547131d	
	QEventLoop::exec() at 0xb54715aa	
	QCoreApplication::exec() at 0xb5473701	
	qtscript_QCoreApplication_static_call() at 0xb08dc4b7	
	0xb6bd813c	
	0xb6ac1f68	
	0xb6a9164c	
	0xb083e0f4	
	0xb6a44262	
	0xb6a445f7	
	0xb6bb0f92	
	QScriptEngine::evaluate() at 0xb6bba46f	
	RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:790 0x87d5a26	
	RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:786 0x87d591f	
	RScriptHandler::init() at RScriptHandler.cpp:31 0x8fbbbc2	
	main() at main.cpp:256 0x87cf40a	

 38 QCAD (main)Feature RequestVery Low Save / restore, export / import settings Closed
100%
Task Description

Inside the application preference dialog:

  • save settings (asks for a name)
  • restore settings (picked from a list that contains all so far saved settings and some presets)
  • export settings (to a file)
  • import settings (from a file)

Export / import could be useful for companies to synchronize settings.

 1 QCAD (main)Bug ReportVery Low Sample Task Closed
100%
Task Description

This isn’t a real task. You should close it and start opening some real tasks.

 2218 ECMAScriptBug ReportVery Low RPolyline.appendVertex() doesn't default to width = zer ...Closed
100%
1 Task Description

When I use poly.appendVertex(vector, bulge) the polyline is finally created with NAN widths

This, while the signature explains that bulge, width1 and width2 default to zero.
https://www.qcad.org/doc/qcad/latest/developer/class_r_polyline_entity.html#a9ee706e50d6cc267fc84a85b7c81d5e6

Regards,
CVH

1900QCAD (main)Bug ReportVery LowRemote shares initially not accessible.Assigned
0%
Task Description

My data files are stored on network shares (synology) with a GB link. QCAD Pro is run in Admin mode.

While in my Windows browser all remote shares are accessible (Green), in the QCAD file open menu they are initially shown as not accessible (Red). By accessing a specific drawing file in a remote share, the share will open and turn green.

Same behavior using ‘Open recent’. Always the message is given that the requested file does not exist, and the file is wiped from the ‘Recent Open’ list. Only if the share is first accessed through ‘Open’ with a random file, it will turn and a ‘recent open’ file for that share will open.

Drag and Drop from a remote share will never work.

 890 QCAD (main)Bug ReportVery Low Relative zero point mark artifact on print preview Closed
100%
Task Description

The relative zero point mark appears on the print preview screen. I don’t know, if it also gets printed (my printer setup appears to be broken at the moment), but it does not get exported to PDF, so I guess it is only on the print preview.

On a side note, I think that the reset command (qq) should also clear this. The manual states:

The Neutral State of QCAD
Menu:    Edit - Reset
Keycode: QQ

After the start, QCAD is in its neutral state. That means that no special tool is active and QCAD waits for you to click a menu or tool button to start a tool and start doing something.

As there is no relative zero point just after startup, I think it should also not persist a qq.

 1795 QCAD (main)Bug ReportVery Low Quit Menu Item disabled after opening preferences Closed
100%
Task Description

Quit Menu Item disabled after opening preferences.

System: OSX 10.13.6
Qcad version: 3.21.2.0

How to repeat:

  1. Open QCad
  2. Open preferences dialogue “QCad Pro → Preferences”
  3. Close dialogue
  4. The menu item “Quit QCad Pro” is now disabled. See attached screenshot

Repeatability: 100%

 1369 QCAD/CAMBug ReportVery Low qcad-bin is trying to access non-existent /home/andrew Closed
100%
Task Description

I experience long start delays. I’ve trace the problem to the fact that I have autofs automounting my home directories. However, an strace of qcad-bin shows the following:

execve("/opt/ribbonsoft/qcad/qcad-3.12.6/qcad-bin", ["/opt/ribbonsoft/qcad/qcad-3.12.6"...], [/* 87 vars */]) = 0
brk(NULL)                               = 0x1eca000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fd6194ad000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/tls/x86_64/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/tls/x86_64", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/tls/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/tls", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/x86_64/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/x86_64", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib", 0x7fff4722f250) = -1 ENOENT (No such file or directory)

Since there is no “andrew” user here, I have to wait for automount to timeout which takes about 2m and is rather annoying.

2261QCAD (main)SuggestionVery LowQCAD change freehand tool to freehand spline toolAssigned
0%
Task Description

no task description

 616 QCAD (main)Bug ReportVery Low Qcad 3 logo incorrect Closed
100%
Task Description

Not a major thing in fact, but there is an error in the logo of QCad3.
Surrounded in red in the jpg.

 494 WebsiteBug ReportVery Low QCAD 3 it's also for Apple PPC! Closed
100%
Task Description

In the website → http://www.qcad.org/qcad3.html
lacks compatibility with Leopard 10.5.8 PPC. I chose QCAD for this ... ;-)

 63 QCAD (main)Bug ReportVery Low Property Editor is floated after first start Closed
100%
Task Description

OpenSUSE / Ubuntu / Kubuntu: After the first start, the property editor window is (unless the layer list) floated.

 1042 QCAD (main)Bug ReportVery Low Preferences dialogs: help button shown in dialog header Closed
100%
Task Description

See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2887&view=unread#unread

 1799 QCAD/CAMBug ReportVery Low Postprocessor: sign not forced for negative values roun ...Closed
100%
Task Description

formatValue returns “0” instead of “+0” for negative values that round up to 0 with the configured decimals.

 651 QCAD (main)Feature RequestVery Low Posibility print some layers in color and others in bla ...Closed
100%
Task Description

Qcad3 have the feature to print in 3 ways: color, grey and black.

The missing feature is select some layers to preserve the original color in the black mode of print.

 93 QCAD (main)Feature RequestVery Low Per drawing Quick SVG Export settings Closed
100%
Task Description

A single drawing has an array of options regarding dimension font-size, printout-scale etc. It would be nice to also save Quick SVG Export settings, as can be specified in the Advanced Export Dialogue or in the Application Preferences Dialogue, with each drawing.

 2126 QCAD (main)SuggestionVery Low PE casts on individual hatch segments Closed
100%
1 Task Description

QCADpro 3.25.2.1 / win7pro 32 bit / 4GB / 1e generation i7 2.6Ghz / HDD GeForce GT 520

The method PE casts the clipboard on individual hatch segments.
Hatches should be considered as a single complex entity not allowing certain actions.

Discovered while:
https://qcad.org/rsforum/viewtopic.php?f=33&p=30008#p30008

Not that it matters: In doing so the scaling is off too.

Regards,
CVH

 1587 QCAD (main)Bug ReportVery Low PDF export created with wrong date time Closed
100%
Task Description

Hi guys,

when I export my dxf drawing to pdf, the pdf properties shows wrong “created date”. I am in UTC+2, the date shows 2 hours less.
I exported the pdf at 12:24, the attached ps shows 10:24.

BR,
Soma

 1806 QCAD (main)Bug ReportVery Low Overlay Toolbar visibility in GUI not saved Closed
100%
Task Description

Switch “Overlay” Toolbar to visible below:
View/Toolbars and Widgets/Toolbars/View/Overlays, place the Toolbar in GUI, restart QCAD and the Toolbar is back to invisible.

 1583 QCAD (main)Bug ReportVery Low Option / Rotation missing defaults for 15 and 345 degre ...Closed
100%
Task Description

... just cosmetic!

The Option drop down list for rotations (e.g. Paste etc) shows all steps incremental for every 15 degree - but 15 and 345 degree are missing.

I’m happy that we don’t have bigger problems!!! :-)

Showing tasks 2151 - 2200 of 2291 Page 44 of 46<<First - 42 - 43 - 44 - 45 - 46 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing