QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  descSummaryStatusProgress
 1762 QCAD (main)Bug ReportVery Low Modify // .... selection of entities on locked layer al ...Closed
100%
Task Description

Not served with the degration to ‘Suggestion’  FS#1759 .
Demanded closing  FS#1759  & re-entered

Locking entities (by layer) to avoid selection,eg. nearby,very close by or on the same spot, does not have the intended influence.

Asumed wrong:
- Modify DI
- Modify B2
- Modify D3
- Modify MT
These 4 need a single entity to be selected and selection of a locked entity is allowed.(=questionable)
The action will allways leed to ‘not allowed’.(=correct)

Questionable:
- Modify RM
- Modify CH
- Modify RN
These 3 need a pair of entities.
RM: Selection of a locked limiting entity is allowed (=questionable), enity to trim not.(=correct)
The action will trim unlocked entities to the locked limiter.(=questionable)
CH & RN: Selection of a pair of entities is allowed.(=questionable)
Trimming if ‘trim’ is on will not occur because locked and leeds to ‘not allowed’.(=correct)
The creation of the bevel or rounding on an active locked layer will not occur because locked and leeds to ‘not allowed’.(=correct)
The creation, except for polyline segments (because locked themself), on an active unlocked layer will be done.(=correct)

Less severe but still questionable: (because these don’t necerally act on the locked entities themselves)
- Modify OF
- Modify OH
- Modify SS
OF: Selection of a locked base entity is allowed.(=questionable)
The preview is casted only if the active layer is unlocked.(=correct)
The creation is only done on an active unlocked layer.(=correct)
OH: Selection of a locked base entity is allowed.(=questionable)
Selection of point references from entities on locked layers is allowed.(=questionable)
The preview is casted only if the active layer is unlocked.(=correct)
The creation is only done on an active unlocked layer.(=correct)
SS: Selection of point references from entities on locked layers is allowed.(=questionable)
Strechting is only done for unlocked entities. (=correct)

1765QCAD (main)Bug ReportVery LowErrors with polyline offsetAssigned
0%
1 Task Description

Win 7 32 bit QCAD 3.20.1

Ofsset of a base-line with arcs results in massive ammount of errors.
Most of them occur as a cluster of very tiny segments and are part of the offset. (zoom far in at the red circles)
Mostly they occur where the offsetted arcs should merely be trimmend pairwise.
Some occur as detached entities or as detached strings of entities very near the offset (strings not documented).
Spooks occur at opposite site when base-line is not closed.
360° curls can occur with R = Offset.
Null-entities may occur (not documented, hard to find and not able to copy).

The base-line is checked and sound and has mixed tangentially or not tangentially connected arcs.
Offsetting the mother base-line of the base in the file has similar effect but not all and/or different ones.
Also encountered with offseting polys from fonts.
Used to define pocket paths for CNC.
Detected because the CNC driver will not accept Self-crossers, Null-entities or open ends depending on the settings.

Work arround is to explode and select small entities but this does not solves the issues.
1) Choosing the tolerance large enough will detect small segments that should stay.
2) Recombining will generate new ones at the place where the main segments remain crossed.
Cleaning up the paths is a daunting process with some thousand segments for several offsets.

I assume this has an infuence on the CAM part of QCAD too unless the offset method is different.

 1767 QCAD (main)Bug ReportVery Low Dimension Leader Closed
100%
Task Description

On print mode, the arrow not appear in the dimension

 1795 QCAD (main)Bug ReportVery Low Quit Menu Item disabled after opening preferences Closed
100%
Task Description

Quit Menu Item disabled after opening preferences.

System: OSX 10.13.6
Qcad version: 3.21.2.0

How to repeat:

  1. Open QCad
  2. Open preferences dialogue “QCad Pro → Preferences”
  3. Close dialogue
  4. The menu item “Quit QCad Pro” is now disabled. See attached screenshot

Repeatability: 100%

 1798 QCAD (main)Bug ReportVery Low Drawing Pref > Linetype > Scale of linetypes matches th ...Closed
100%
Task Description

“Drawing Preferences / General / Linetype / Scale of linetypes matches the scale of each viewport” is checked by default for new drawings, however the option is not applied until you open the “Drawing Preferences / General / Linetype” screen and click OK – no need to change anything, just opening the screen and clicking OK is sufficient.

 1799 QCAD/CAMBug ReportVery Low Postprocessor: sign not forced for negative values roun ...Closed
100%
Task Description

formatValue returns “0” instead of “+0” for negative values that round up to 0 with the configured decimals.

 1804 QCAD (main)Bug ReportVery Low Application Preferences > Tool Settings: Filter for "Vi ...Closed
100%
Task Description

1. Search the Tool Settings for “View” and you will only find “Overlays” without the submenu information.
2. Check View manually without a search will provide the submenu information.

 1806 QCAD (main)Bug ReportVery Low Overlay Toolbar visibility in GUI not saved Closed
100%
Task Description

Switch “Overlay” Toolbar to visible below:
View/Toolbars and Widgets/Toolbars/View/Overlays, place the Toolbar in GUI, restart QCAD and the Toolbar is back to invisible.

 1899 QCAD (main)Bug ReportVery Low View > Auto zoom: zoom to invisible entities in blocks Closed
100%
Task Description

Create and insert a block with entities on layer “0” and layer “1”.

Switch off layer “1”.

Auto zoom zooms to block boundary of all entities, including those on layer “1”.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6336

1900QCAD (main)Bug ReportVery LowRemote shares initially not accessible.Assigned
0%
Task Description

My data files are stored on network shares (synology) with a GB link. QCAD Pro is run in Admin mode.

While in my Windows browser all remote shares are accessible (Green), in the QCAD file open menu they are initially shown as not accessible (Red). By accessing a specific drawing file in a remote share, the share will open and turn green.

Same behavior using ‘Open recent’. Always the message is given that the requested file does not exist, and the file is wiped from the ‘Recent Open’ list. Only if the share is first accessed through ‘Open’ with a random file, it will turn and a ‘recent open’ file for that share will open.

Drag and Drop from a remote share will never work.

 1904 QCAD (main)Bug ReportVery Low File > Bitmap Export: Non-plottable layers not exported Closed
100%
Task Description

File > Bitmap Export does not export non-plottable layers.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=6364

1905QCAD (main)Bug ReportVery LowView > Property Editor: Changing attribute of block cha...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6367#p23947

1919QCAD (main)Bug ReportVery LowWrong order XY(Z) for Ordinate Dimension in property ed...Assigned
0%
Task Description

Win7pro Qcad Pro 3.22.1.2

In property editor
properties of an Ordinate Dimension

Without Show Z
DefPoint is displayed in order YX?

With Show Z
Origin is displayed in order XZY?
DefPoint is displayed in order YZX?
LeaderEndPoint is displayed in order ZXY?

Regards

1923QCAD (main)Bug ReportVery LowFaulty rendering Polylines with Global/Local Widths and...Assigned
0%
Task Description

Win7pro 32bit Qcad 3.23.0

Andrew,
The Arc segments of Polylines with Global or any Local Width render faulty where Global Z or any of the arc’s local Z is not zero.

In the attached drawing setting the Global Z of the inner poly to 5,10,...

The setting of Z to not zero affects the radius of the projected arc and not the bulging of the poly.
It also affects the projected widths of the line inversely, but not by changing the widths properties.

Pritty rare combination! True.
Qcad is 2D native! True.

Flatten will resolve this.

It is not a purely visual rendering fault, the poly will explode as such.

Maybe similar flaw as with uneven scaling blocks with arcs.
https://qcad.org/rsforum/viewtopic.php?f=8&t=5566#p20703

Regards

 1932 QCAD (main)Bug ReportVery Low Check for update fails to discover new version Closed
100%
Task Description

“Help→Check for QCAD Pro Updates” fails to discover new version. Tested on OSX and Linux versions.

1974QCAD (main)Bug ReportVery LowFile > Print Preview: Cannot move paper in new drawingUnconfirmed
0%
Task Description

Yesterday I set up a Windows 64 bit install of QCAD Pro which shows the same bug I have been seeing for a while in the Community linux git repo.

Create a new drawing and then go to “Print preview”. Enable “Move paper postion”, the cursor changes to the hand icon, but the paper position is unable to be moved. Only by saving the drawing, exiting the program, restarting and reopening the drawing, will the “Move paper postion” function correctly.

Affected versions tested:

Windows 64bit installer download, as of yesterday.
Linux 64bit build from git, about 20minutes ago.

For what it’s worth, this bug is not present in this previous git checkout:

Version:
3.21.1.0 (3.21.1)
Internet:
QCAD.org
Build Date:
Jul 2 2018
Revision:

Qt Version:
5.7.0
Architecture:
x86_64
Compiler:
gcc 6.3.1

Thanks for a great product.

 29 QCAD (main)Feature RequestVery Low Settings migration QCAD 2.x -> 3.0 Closed
100%
Task Description

Take over settings from old, already installed QCAD versions, if possible.

 38 QCAD (main)Feature RequestVery Low Save / restore, export / import settings Closed
100%
Task Description

Inside the application preference dialog:

  • save settings (asks for a name)
  • restore settings (picked from a list that contains all so far saved settings and some presets)
  • export settings (to a file)
  • import settings (from a file)

Export / import could be useful for companies to synchronize settings.

 62 QCAD (main)Feature RequestVery Low Context Menu "Change preferences" Closed
100%
Task Description

Provide context menu that shows “Change preferences”

  1. opens the preference dialog
  2. shows the appropriate page

E.g. for

  • library browser (to set library sources)
  • graphics view (to set colors)
  • ruler (to set drawing unit)
 93 QCAD (main)Feature RequestVery Low Per drawing Quick SVG Export settings Closed
100%
Task Description

A single drawing has an array of options regarding dimension font-size, printout-scale etc. It would be nice to also save Quick SVG Export settings, as can be specified in the Advanced Export Dialogue or in the Application Preferences Dialogue, with each drawing.

 94 QCAD (main)Feature RequestVery Low Application window name Closed
100%
Task Description

It is common practice in MDI apps to use the title of the active tab for the main window. Right now this is always “QCAD”. It would be better if it reflected the name of the drawing in the currently active tab.

 188 QCAD (main)Feature RequestVery Low The "View List" should be remembered Layers Open and cl ...Closed
100%
Task Description

When I save a view for print i like that wiew remember the layers open and closed.

This feature could be improved with remember print scale, dimension text size and page size

 287 QCAD (main)Feature RequestVery Low tool bar icon size Closed
100%
Task Description

It would be nice if one could not only change the icon size of the widget panel but also the icon size of the tool bars.

 292 QCAD (main)Feature RequestVery Low Choose number of copies when using 'snap with distance  ...Closed
100%
Task Description

Choose number of copies when using ‘snap with distance to end’.

This might make sense for certain tools only.

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1643

 491 QCAD (main)Feature RequestVery Low Show keycodes in menus. Closed
100%
Task Description

In the 2.2.2 version was possible to suppress the display keycodes in menus. You can also restore it in version 3?

See attach.

 651 QCAD (main)Feature RequestVery Low Posibility print some layers in color and others in bla ...Closed
100%
Task Description

Qcad3 have the feature to print in 3 ways: color, grey and black.

The missing feature is select some layers to preserve the original color in the black mode of print.

 656 QCAD (main)Feature RequestVery Low Data should not be in programs directory Closed
100%
Task Description

QCAD2 offered the user to specify in the program settings where these directories should be/go, and took the first one in each list as default; QCAD3 only offers to enter auxiliary library and template directories and has no provisions for defaults.

All associated data (scipts, templates, libraries, patterns, fonts) is stored under the program directory, exactly where it should not be. Windows 7 and higher default prevent modifying the programs directory by redirecting the writes.
An extra user-input during the Windows install process would be in order.

QCAD3 should offer the user to specify any and all data directories involved (including the auto save), and make it possible to specify a default for each.
This list could be initialised with the installation defaults, or default to the installation directories when empty.

752QCAD (main)Feature RequestVery LowAdd support for the 3dConnexion Space Navigator (Pan an...Assigned
0%
3 Task Description

The 3dConnexion Space Navigator would be wonderful as a pan and zoom control. I find it extremely useful in SketchUp and when I switch from that to QCAD am always disappointed to find it doesn’t work.

3dconnexion DOT com/buy/shop.html?3dxcp=GA_GA_search_google_US_Brand

While full support for the buttons and such would be nice, just the ability to map the axis to pan and zoom would be wonderful.

 897 QCAD (main)Feature RequestVery Low New arc tool Closed
100%
Task Description

While constructing around the lack of “Line tangent to a circle, perpendicular to a line” ( FS#881 ) which I hereby second :)), it struck me that it might be useful to have a tool that finds the center point of an existing circle/ellipse, or possibly more generally, the center point of an existing circular/elliptical arc.

991QCAD (main)Feature RequestVery LowAdd warning when overwriting custom propertyAssigned
0%
Task Description

Property Editor - Geometry - Custom - Add Custom Property

If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.

 1068 QCAD (main)Feature RequestVery Low Isometric bitmap Closed
100%
Task Description

It would be a nice feature to be able to create an isometric projection of a bitmap.

 1071 QCAD (main)Feature RequestVery Low (Bitmap) scaling convenience option Closed
100%
1 Task Description

This can be done as is in QCAD today, but a quick convenience UI bit would be much appreciated.

Suppose you are working off a bitmap image (transcribing old scan, or you got your apartment’s floor plan like this, because, uh, what tenant needs DXF). It has dimensions markers and everything, but fat chance it’ll be to actual CAD scale after importing.

So, to bring it to scale, you measure between two tick marks on the scale, compute ratio based on measurement and what’s written on the dimension line, and do a scale operation (you can also have QCAD compute the ratio by using math expression, whatever).

That works fine.

A purely just for convenience function to do that would be much appreciated: pick two points, enter what the actual distance between them is, poof bam, appropriate scaling operation is applied.

As a twist, there could be some other bitmap skewing options, like “the points I’ve selected are on a horizontal/vertical line/at an angle of X degrees, then the bitmap would also be applied this transform.

 1132 QCAD (main)Feature RequestVery Low Info > Polygonal Area: create block Closed
100%
Task Description

Optionally create an (anonymous?) block for the polygon and the text.

 1154 QCAD (main)Feature RequestVery Low Add preference for round reference points Closed
100%
1 Task Description

This one is purely cosmetic, instead of square reference points would it be possible to have the choice of either square or round with size?

 1227 QCAD (main)Feature RequestVery Low AutoCAD skin Closed
100%
Task Description

QCAD has a lot of features and buttons, probably more that the autocad I’ve been using. Therefore the learning curve is too slow. It would be a great boost for the program to have the possibility of having an Autocad skin, and it will attract many new users.

1426QCAD (main)Feature RequestVery LowLoad drawings that were open when closing QCAD on start...Assigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4249

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

1649QCAD (main)Feature RequestVery LowAdd configuarable format options for saving blocks to l...Assigned
0%
Task Description

Add configuarable format options in application preferences for saving blocks to library to either dxf or dwg.

 1709 QCAD (main)Feature RequestVery Low Feature request: Add extra padding to textbox. Closed
100%
Task Description

When placing text on a drawing you are offered with the choice of where you want the origin of the textbox to be. That’s very nice. Image 1 shows an example of text with top left origin. It seems there is already some top padding above the text.

Unfortunately there is no option to add extra padding to the other sides so the text is right to the left border of the textbox. To correct this you have to add some parallel construction lines and move the text a bit to the right. Now the text has nice padding. See image 2.

It would be nice to have some padding options when adding/editing text, like in web-design: https://www.w3schools.com/css/css_padding.asp

1788QCAD (main)Feature RequestVery LowNew snap: reference points of a block referencesAssigned
0%
Task Description

I know this was reported and fixed before ...

https://www.qcad.org/bugtracker/index.php?do=details&task_id=843

... but it looks like we have the issue now back with some kind of variation.

If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.

If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.

Edit: New Test drawing:

1920QCAD (main)Feature RequestVery LowEdit > Application Preferences: Add preference to disab...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447

 1921 QCAD (main)Feature RequestVery Low Add error message when requesting raster for a non-exis ...Closed
100%
Task Description

(sorry for duplicate task, cannot remove it now)

It would be nice if QCAD spit some kind of warning message when trying to render a layer with a name that doesn’t exist (and perhaps render nothing), rather than silently rendering an empty image. :D

See https://qcad.org/rsforum/viewtopic.php?f=33&t=6453

1922dwg2bmpFeature RequestVery LowAdd error message when requesting raster for a non-exis...Assigned
0%
Task Description

It would be nice if QCAD spit some kind of warning message when trying to render a layer with a name that doesn’t exist (and perhaps render nothing), rather than silently rendering an empty image. :D

See https://qcad.org/rsforum/viewtopic.php?f=33&t=6453

 1056 QCAD (main)RefactoringVery Low Dead and wrong code in RSPlatform.cpp Closed
100%
Task Description

I am considering pushing the following diff:

--- a/src/core/RSPlatform.cpp
+++ b/src/core/RSPlatform.cpp
@@ -205,25 +205,6 @@ int RS::getCpuCores() {
     cores = sysinfo.dwNumberOfProcessors;
 #elif defined(Q_OS_UNIX)
     cores = sysconf( _SC_NPROCESSORS_ONLN );
-#elif defined (Q_OS_MAC) || defined (Q_OS_BSD4) || [...]
-    nt mib[4];
-    size_t len;
-
-    /* set the mib for hw.ncpu */
-    mib[0] = CTL_HW;
-    mib[1] = HW_AVAILCPU; // alternatively, try HW_NCPU;
-
-    /* get the number of CPUs from the system */
-    sysctl(mib, 2, &cores, &len, NULL, 0);
-
-    if (cores < 1) {
-        mib[1] = HW_NCPU;
-        sysctl( mib, 2, &cores, &len, NULL, 0 );
-    }
-#elif defined(Q_OS_HPUX)
-    cores = mpctl(MPC_GETNUMSPUS, NULL, NULL);
-#elif defined(Q_OS_IRIX)
-    cores = sysconf( _SC_NPROC_ONLN );
 #endif

(truncated list to manage size)

I see that most of this was put in there as a kind of a note-to-self originally, however _SC_NPROCESSORS_ONLN is implemented by every realistically possible targets anyway, so for all practical purposes, this is dead weight.

A couple of questions remain, though:

  • #ifdef Q_OS_WIN32 should probably be Q_OS_WIN, so as to include win64 as well.
  • Assuming the real purpose for this function is to determine how many parts a particular task is to be split into in the future, if and when QCAD gets the need to split expensive tasks among multiple CPUS, “core” probably shouldn’t be static - CPUs are hot-pluggable today, and while one probably doesn’t do that on a laptop, it’s not unfeasible in, say, a VDI environment.

Thoughts?

 1324 QCAD/CAMSuggestionVery Low Confusing Copy / Move option Closed
100%
Task Description

Hi,

Using the Copy and Move command the [ ] Use current layer and attributes’ is confusing.

Perhaps [ ] change copy /moved set to current layers and attributes. is more suitable.

 1375 QCAD (main)SuggestionVery Low Install in hidden folder Closed
100%
Task Description

After each update, I add a dot before the ~user/opt folder (and in the program launcher) created by QCAD to unclutter my file manager’s appearance. Would be easy, I think, to make the installer put the program directly in ~user/.opt, and nobody would miss that folder while browsing through daily used files.

And what about installing the program as root, so all users of a computer could use it without personal installs, and only personal setting files created by users would be kept in ~user/.opt/qcam.

Jean-Claude

 1607 QCAD (main)SuggestionVery Low Indent 'Spline Segments:' in explode preferences Closed
100%
1 Task Description

 FS#1604  was issued because of non-intuitive hierarchy of the preferences for the Explode function.
The task comment recieved explains the funcionallity in details not found elsewhere.

Indentation of the phrase ‘Spline Segments:’ suggest hierarchy.
Graying out the drop down box for the number of spline segments establish hierarchy.

 1759 QCAD (main)SuggestionVery Low Modify // .... selection of entities on locked layer al ...Closed
100%
Task Description

Without any selection.
Entities on a locked layer can be selected after choosing:

Asumed wrong
- Modify DI
- Modify
B2
- Modify D3
- Modify
MT

Questionable
- Modify RM
- Modify
CH
- Modify RN Less severe
- Modify
OF
- Modify OH
- Modify
SS

Regards

Showing tasks 1951 - 1998 of 1998 Page 40 of 40<<First - 36 - 37 - 38 - 39 - 40

Available keyboard shortcuts

Tasklist

Task Details

Task Editing