QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  descSummaryStatusProgress
 966 QCAD (main)Bug ReportMedium Print Dialog Print>Properties>Advanced is blank Closed
100%
Task Description

Just started using v.3.4.2 under Linux Mint 14. To begin with I could not print my drawing in color. Worked out that this was due to the default printer setting (driver hpcups 3.12.6) which was Draft Grayscale. My drawing printed in color fine when I changed this. I believe that it ought to be possible to set this from within QCAD, but the dialog “Print>[printer]Properties>Advanced” is blank. Has it been disconnected somehow?

 970 QCAD (main)Bug ReportMedium Unable to save file with leading / trailing spaces in l ...Closed
100%
Task Description

Layer and block names with leading / trailing spaces lead to exception when saving file through Teigha.

 973 QCAD (main)Bug ReportMedium Drawing outside zoom limit Closed
100%
Task Description

When a drawing is placed in X,Y coordinates QCAD is unable to zoom to the drawing.

We use X,Y coordinates like X=182,635,000 mm Y=579,005,000 mm for the location of the constructions.

If you use Auto Zoom you get to see a small dot on the screen but as soon as you try to zoom to the drawing QCAD jumps within a certain limit and you can’t get to the drawing.

 993 QCAD (main)Bug ReportMedium QCAD fails to load drawing with message: maximum recurs ...Closed
100%
Task Description

Since today, QCAD fails to load my drawings, with the following error message in the console:

Warning: RBlockReferenceData::getBoundingBox: maximum recursion depth reached: block: “Drukknop”

The block in question is the AREI (Belgian standard for symbols in electrical installations) symbol for a “button” light switch.
It’s a small and simple drawing (see attachment).

I’ve added a lot of these buttons in the drawing since the previous version, but there were some already present, and this never caused problems.

QCAD version: QCAD 3.4.4 Pro for Ubuntu Linux 32bit
System output: see attached file

 1017 QCAD (main)Bug ReportMedium crash when saving file with block attributes Closed
100%
Task Description

Hey,

QCAD crashes when saving a drawing that has a block attribute added.
This happens both with a block and the exploded version of the block.

Please find attached the system info, as well as an example drawing.
In this drawing, there are three boxes. The lower 2 boxes are intended to contain text attributes.

Output from the command line:
[email protected]:~/opt/qcad-3.4.5-pro-linux-x86_32$ ./qcad
Debug: RDxfPlugin::init
Debug: RHelpPlugin::init
Debug: RProScriptsPlugin::init
Debug: TIMER: 90 ms - “loading add-ons”
Debug: TIMER: 781 ms - “initializing add-ons”
Debug: checking for updates...
Warning: QSslSocket: cannot resolve SSLv2_client_method
Warning: QSslSocket: cannot resolve SSLv2_server_method
Debug: no updates available
Debug: checking for updates...
Debug: no updates available
Debug: RPluginBase: postInit: “DWG”
Debug: RPluginBase: postInit: “Pro Tools”
Debug: code page: 30
Debug: autosave skipped [08:54:14]: no modifications
./qcad: line 18: 3850 Segmentation fault (core dumped) LD_LIBRARY_PATH=”$DIR” “$binary” -style plastique “[email protected]

Kind regards,

Stijn

 1018 QCAD (main)Bug ReportMedium Crash when using Draw > Polyline > Trim Segments Closed
100%
Task Description

Draw > Polyline > Trim Segments crashes if QCAD is compiled using gcc 4.2.1 which is the case for the Mac OS X package.

 1032 QCAD (main)Bug ReportMedium Copy / paste: pasting copied block references results i ...Closed
100%
1 Task Description

- Copy two block references of block “circle” which contains one circle
- Paste into new, empty drawing
- Pasted block “circle” contains two circles

 1047 QCAD (main)Bug ReportMedium Preview does not use drawing settings Closed
100%
Task Description

See forum thread:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2909

 1118 QCAD (main)Bug ReportMedium Text not saved Closed
100%
1 Task Description

Hello,

I am stage manager and I have been using QCAD PRO nearly every day for 2 years now.
But since yesterday it seems that text is not saved within the file : when I reopen a saved file, text doesn’t show up. Do I miss a setting ?
I currently run Mac OS X Mavericks but there haven’t been any issues with this OS for months.

I deleted the app and prefs and tried out with 3.6.0 (which I don’t use because it often quits brutally), and also the free version of 3.6.4
But the issue still the same.

As I use this app for my work, it is very annoying not to be able to use text !
Thanks for your help

 1121 QCAD (main)Bug ReportMedium Draw > Polyline > Append Node(s) broken Closed
100%
Task Description

Selecting the polyline is not possible.
Possibly related to update of DrawPolyline tool.

 1123 QCAD (main)Performance IssueMedium Hatch in block causes performance problem Closed
100%
Task Description

Hatches in blocks cause poor performance while (auto-)snapping.
The lines that make up those hatches are included in the search for intersection points which is not desirable.

 1164 QCAD (main)Feature RequestMedium make selected layer default parent for new layer Closed
100%
1 Task Description

Hello!

I would like to suggest a small, but yet important improvement to usabilty.

When adding a new layer the currently selected layer should be default for parent layer.

Currently a new layer is by default a top level layer, and so the user has to select the parent layer for each sub-layer, again and again.

Thanks,
Christian

 1167 QCAD (main)Bug ReportMedium Aligned dimensions not displayed Closed
100%
Task Description

Aligned dimensions are not displayed correctly after loading. Definition point and text position are set to NaN.

 1181 QCAD (main)Bug ReportMedium Paper borders displayed wrong on paper unit being chang ...Closed
100%
Task Description

When paper unit being change to other values (other than default “Milimeter” or “None”), the paper borders are wrongly displayed in print preview.
The attachment screenshot images is for example.
1, Edit →Drawing Preferences →Drawing Unit →Pager Unit, choose the value “Centimeter”.
2, Edit →Drawing Preferences →Page →Pager →Paper size, choose the value “ISO A4”.
3, File →Print Preview, the displayed print borders are wrongly displayed as a very narrow rectangle, which is obviously wrong.
Thanks for any help.
Reeve

 1216 QCAD (main)Bug ReportMedium DXF/DWG writing: block name mixup with anonymous blocks Closed
100%
Task Description

Anonymous blocks (with names starting with *, imported from other software) can be mixed up on writing.

 1241 QCAD (main)Bug ReportMedium Options tool bar fields not editable, no interaction wi ...Closed
100%
Task Description

Likely affects Windows Vista, 7, 8.

See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3588 http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3587

Caused by update from Qt 4.7.4 to Qt 4.8.7

 1243 QCAD (main)Bug ReportMedium Printing / PDF Export: points offset Closed
100%
Task Description

Hi !
im’ trying the 3.9.6 base version, and i have found a problem in printing/exporting..

To replicate the bug:
Try to draw a simple form, for ex a circle, and draw a center of this circle using POINT function.

Now if you make a print preview, then CENTER the circle in the page and try to export to pdf or print, the circle and the POINT (center) are ofsetted !!

i have try to make the same operation with 3.9.5 and i have no problem !!!

 1268 QCAD (main)Bug ReportMedium DXF/DWG import: cannot open file with custom linetypes Closed
100%
Task Description

If custom complex linetypes embedded in a file refer to a font that is not available for linetype shapes, the file cannot be opened.

Error:
Can not open file Please check your access rights, file format and file extensions

See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3718

 1347 QCAD (main)Bug ReportMedium Point style bug. Closed
100%
Task Description

Hi !
i have find another strangeware about points.. if you set a different point style in program options, on the display the style is correct, but when you try to print or export the drawing, the points are printed as default “point” (little black circle).

 1348 QCAD (main)Bug ReportMedium Points move during print/PDF-export Closed
100%
Task Description

Points move by a constant offset relative to the rest of the drawing when printing or exporting to PDF.

This is the exact same bug as  FS#1243 , which was reportedly fixed in version 3.9.7 with commit https://github.com/qcad/qcad/commit/9c9d7bbc3fd845b8475ff12a919ad8e86bbaeb1f, but has resurfaced in version 3.12.4 (and possibly earlier versions that I have not tested).

To replicate the bug, create a simple drawing with points and lines then print or export to PDF, and notice that the points have moved relative to the lines or have disappeared off of the page entirely.

Tested with Arch Linux, 64 bit; QCAD version 3.12.4 using the prebuilt binaries supplied from the qcad.org download site.

 1353 QCAD (main)Bug ReportMedium Text rendering: subscripts and superscripts display Closed
100%
Task Description

Text with subscripts (e.g. “S\S^3;”) is display incorrectly with the latest version on both Mac OS X and windows 64-bit.

The subscript (”3”) is displayed before the normal text (”S”).

I have been using subscripts to indicate electrical switch types on my blue prints.

It appears that superscripts are also being displayed incorrectly.

 1357 QCAD (main)Bug ReportMedium Can't open files with special characters in their names Closed
100%
Task Description

When opening a .dxf file saved by QCAD with a name containing a special characters (tested with diacritics), it fails with the following message:

Cannot open file
'E:/tèst1.dxf'
Import failed.

How to reproduce:
1 - Save a file (content doesn’t matter, it’s the same with an empty file and a file containing data) using the name “tèst1.dxf” 2 - Try to open the file
3 - Error message

What is expected:
The file open.

Note that the problem doesn’t lie in the “save” step: the same file, once renamed to “test1.dxf” opens fine.

 1442 QCAD (main)Bug ReportMedium Imported and saved dimensions reference empty blocks Closed
100%
Task Description

- Import drawing from other CAD application with dimension blocks (*D..)
- Save file with QCAD
- Dimension blocks are exported to drawing file but are empty which can break compatibility with other products

 1608 QCAD (main)Bug ReportMedium Unsupported XData type NOT imported Closed
100%
Task Description

Unsupported XData type NOT imported errors on loading DWG files.
Resulting lines in image are not drawn correctly.
See details and sample file in forum post: https://www.qcad.org/rsforum/viewtopic.php?f=33&p=18223#p18223

 1657 QCAD (main)Bug ReportMedium Edit > Drawing Preferences > Printing > Page: no effect ...Closed
100%
Task Description

Printer settings cannot be changed for model space.

 1733 QCAD (main)Bug ReportMedium Open DXF just written by qcad crashes qcad  Closed
100%
Task Description

I am a new qcad pro user and created a simple drawing and saved as DXF R27 and closed the app. I reopen the app and open that DFX and the app crashes. However, I can import it. I suspect (without any evidence) that the text in the dimension of the drawing is the problem. Perhaps this issue is like #1261

Process: QCAD-Pro [97927]
Path: /Applications/QCAD-Pro.app/Contents/MacOS/QCAD-Pro
Identifier: org.qcad
Version: 3.19 (3.19.2)
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: QCAD-Pro [97927]
User ID: 501

Date/Time: 2018-04-11 18:07:15.937 -0700
OS Version: Mac OS X 10.12.6 (16G1314)
Report Version: 12
Anonymous UUID: 1EBA0D43-4553-C6E8-6F6A-1A9F3992052D

Sleep/Wake UUID: 86FC779B-AD43-426E-9FFA-4AFBFD6EFC8A

 1736 QCAD (main)Bug ReportMedium Draw > Image: broken Closed
100%
Task Description

Draw > Image broken due to UI file resource not being found.

 1737 QCAD (main)Bug ReportMedium Block > Attributes > Define Block Attribute: broken Closed
100%
Task Description

Broken due to UI file resource not being found.

 1747 QCAD (main)Bug ReportMedium Scaling w 2 ratios fails to scale polyline arc Closed
100%
Task Description

Scaling without keeping the aspect ratio fails to scale an arc to an ellips when this is part of a polyline.

Discovered while documenting feature request ‘Skewing’

CVH

 1750 QCAD (main)Bug ReportMedium trimming polylines Closed
100%
Task Description

Trimming polylines especialy those with a string of small segments should be done at the intersection of those polylines.
Now trimming is done with the seggments that where the nearest when selecting the two polylines.

 1773 QCAD (main)Bug ReportMedium File > PDF Export / SVG Export / Bitmap Export: file na ...Closed
100%
Task Description

Configure QCAD to use native file dialogs
Load file
Export file as PDF, SVG, Bitmap
File name suggested by file dialog is drawing file which means user might accidentally overwrite drawing file.

 1821 QCAD (main)Feature RequestMedium Export svg with linetype parameter Closed
100%
Task Description

Hi,

as I saw in the svg file and tried it, the ‘stroke-dasharray’ parameter needed (with values) to show the line same as in the editor.

Example:
...

      <!-- Line -->
      <path d="M207452.1773,1518891.8208 L203034.0991,1518891.8208 " style="stroke:#808000;stroke-dasharray:200,300;stroke-width:25;" qs:layer="layer"/>

...

Thanks,
Soma

 1840 QCAD (main)Bug ReportMedium Edit > Paste along entity: endless loop Closed
100%
Task Description

Ich habe im Snapshot 3.21.3.14 unter macOS einen Fehler gefunden, der QCAD in eine Endlosschleife führt, sodaß QCAD nicht mehr antwortet.
Details siehe unter https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6011#p22435

 1849 QCAD (main)Bug ReportMedium paste of spline with scaling of 0 crashes application Closed
100%
Task Description

Application crashes when entering 0 in the scale option while pasting a spline.

This is an issue also when entering scale factors of less than 1, as the application immediately crashes when entering the 0 digit.
As a workaround for a scale factor of e.g. 0.5, one can enter 1.5 and then edit the 1 digit to 0.

 1868 QCAD (main)Bug ReportMedium Reading ellipse from DXF Closed
100%
Task Description

Loading the appended dxf-file should show a circle and an ellipse.
The circle is ok.
The ellipse gets always an ellipse with center at (0|0),
main vertex at (1|0) and ratio of 1.

 1929 QCAD (main)Bug ReportMedium Printing Problem - Preview differs from Printout Closed
100%
Task Description

... ? I reported this already some days ago, but the task doesn’t show up in the list? ...

Comparing ‘Drawing’ and ‘Preview’ - o.k.
Comparing ‘Preview’ and ‘Printout’ - NOT o.k. ! Elements are missing
(Rem: in the QCAD sketch itself, the missing elements are in a separate layer; however, anyway - preview should show the same image as the printout !?)

G.W.

 1938 QCAD (main)Bug ReportMedium Segfault when trying to insert block from library (Fedo ...Closed
100%
Task Description

(base) [[email protected] qcad-3.23.0-pro-linux-x86_64]$ ./qcad
QCAD version 3.23.0
10:21:34: Debug: calling odInitialize
10:21:34: Debug: dropped global XDATA (no res buf): “ViewportCenter” 10:21:52: Debug: importing file: /home/kforrester/Resilio Sync/Technical/Process Engineering/equipment_tag_and_name.dxf
./qcad: line 9: 3844 Segmentation fault (core dumped) LD_LIBRARY_PATH=”$DIR” “$binary” “[email protected]

QCAD has unexpectedly quit.

Please use the offscreen platform plugin for headless systems
(without a running X11 server):
./qcad -platform offscreen

In addition, you might have to override the default Qt style
to prevent the loading of a native desktop style (such as GTK):
./qcad -style plastique

I have tested this in version 3.22.1 too and get the same result. Reverting all the way back to 3.13.1 results in an operable version of qcad when working on the same file and library blocks.

 1951 QCAD (main)Bug ReportMedium QCAD Prof 3.23 does not switch to Finnish keyboard layo ...Closed
100%
Task Description

QCAD Professional 3.23.0 is using en_US keyboard layout although I have a Finnish keyboard on Fedora 29. I have not found a way, how to chance the keyboard definition. In Fedora repositories there is QCAD Community Edition 3.22.1, and keyboard definitions there are working OK. Keyboard layout is following Gnu desktop keyboard selection and can be changed on the fly. Wrong keyboard layout makes working very hard, because almost all special keys are in different places, like colon, semicolon, plus, minus, parentheses, slash etc.

 1978 QCAD (main)Bug ReportMedium Mirror is not Flip Closed
100%
Task Description

Hi Andrew,

Nosing around in the QCAD Reference Manual I noticed a misperception in the Mirror / Flip commands.

 2054 QCAD (main)Bug ReportMedium Misc > Modify > Flatten Drawing to 2D Closed
100%
Task Description

Crash when drawing contains viewports.

 2074 QCAD Community EditionBug ReportMedium No tile print option Closed
100%
Task Description

I’m trying to print a large cad drawing at 1:1 scale. However, when I go into preview to select tile button, it doesn’t exit. First image is my screeen capture, the 2nd is from the online tutorial regarding printing and the button that is missing.

 1237 QCAD/CAMBug ReportMedium Blocks should be layer agnostic Closed
100%
Task Description

I have created a block from a selection. I have then later created more items on my CAD page using that block, then later yet, moved the objects to a new layer. I noticed that while the object has accepted being on the new layer, the color hasn’t changed to the new layer’s color. I can only get the line color to change if I go into the block itself and move the individual segments of the block to that new layer, then save the new block (which, by the way, I can’t save over the existing block?!?!)

In the sample file attached, you will see that the block item in the 3 o’clock position is in layer 0, while the rest are in “Vent Holes” layer. If you make layer 0 hidden, the one block is hidden (like it should), but the block item refuses to take on the layer’s color even though the block’s color is “By Layer”

 1293 QCAD/CAMBug ReportMedium Crash when snapping to intersection points between 3d l ...Closed
100%
Task Description

I have a file that makes QCAD crash. I’ve been editing this design across different versions of QCAD over time and this is the first time I have a problem with it.

Steps to reproduce:
Open the attached file and try to add some entities or dimensions to it (you may need to create large ones since it seems to depend on the zoom factor; for example a very large ellipse). After a freeze of a few seconds QCAD will quit.

The attached file is a simplified version from which I deleted a number of entities; on the original I can’t do anything – QCAD crashes as soon as I try to create any object.

Cause: 3D lines with x1==x2, y1==y2 but z1!=z2

 1564 QCAD/CAMBug ReportMedium QCAD/CAM: black main window or main window not painted  ...Closed
100%
Task Description

QCAD/CAM version 3.16.7.1 (snapshot release)

QCAD/CAM version 3.16.7.1 for Ubuntu Linux starts up with a totally black screen with only the title bar showing. By clicking around at the top of the screen I can get the menus to drop down and appear over the blank black screen. That is how I captured all the version information below. QCAD/CAM version: 3.15.5.0 for Ubuntu Linux starts with all the normal screen graphics appearing normally. I labeled this bug report as critical because QCAD/CAM is unusable on Ubuntu Linux, but for me it is not so critical since I can use the Windows version.

Versions
QCAD version: 3.16.7.1
Date: Mar 22 2017
Qt version: 5.8.0
Compiler version: gcc 4.8.1
Build Date: Mar 22 2017
Revision: 17a80fac27c3ae6aa68cd4ee15ffa4f3e2ab0a9a

Architecture: x86_64
OS: Linux
OS version: Unknown

Locale
QCAD locale: en
Name: en_US
Country: 225
Country name: United States
Language: 31
Language name: American English
Script: 7
Script name: Latin
Decimal point: 46
Negative sign: 45
Positive sign: 43
Text direction: 0
System codec: UTF-8

Arguments: /home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/qcad-bin

Plugins
Description=CAM tools.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadcamscripts.so
ID=CAM
License=Proprietary
Name=CAM
NamePostfix=/CAM
PurchaseURL=http://ribbonsoft.com/add-ons/qcadcam-purchase QtVersion=5.8.0
SplashOverride=:/scripts/Cam/splashscreen.png
[email protected]=:/scripts/Cam/[email protected]
URL=http://ribbonsoft.com/add-ons/qcadcam Version=3.16.7.1

FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcaddwg.so
ID=DWG
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
SystemCodePage=0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1 (Teigha® 4.02.2.0)

Description=Import/export support for the DXF format. Based on dxflib.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcaddxf.so
ID=DXF
License=GPLv2+
Name=DXF
QtVersion=5.8.0
URL=http://www.qcad.org Version=3.16.7.1 (dxflib 3.12.2.0)

Description=OpenGL ES 3D display.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadgles3d.so
ID=GLES
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Description=Integrated help browser.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadhelp.so
ID=HELP
License=Proprietary
Name=QCAD Pro
QtVersion=5.8.0
URL=http://www.ribbonsoft.com Version=3.16.7.1

Description=Polygon clipping, boolean polygon operations, path offset.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadpolygon.so
ID=POLYGON
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Description=QCAD Professional tools.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadproscripts.so
ID=PROTOOLS
License=Proprietary
Name=QCAD Pro
NamePostfix= Professional
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Description=Polygon triangulation.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadtriangulation.so
ID=TRIANGULATION
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Environment
LC_TIME=en_US.UTF-8
DESKTOP_SESSION=default
SSH_AGENT_PID=1743
[email protected]=ibus
LOGNAME=dave
QT_ACCESSIBILITY=1
PAPERSIZE=letter
HOME=/home/dave
LC_NUMERIC=en_US.UTF-8
XDG_DATA_DIRS=/usr/share/default:/usr/share/gnome:/usr/local/share/:/usr/share/:/var/lib/snapd/desktop
XDG_VTNR=2
SHELL=/bin/bash
XDG_SEAT=seat0
GIO_LAUNCHED_DESKTOP_FILE=/home/dave/Desktop/Ribbonsoft-qcad.desktop
WINDOWPATH=2
QT_IM_MODULE=ibus
XDG_SESSION_TYPE=x11
XDG_RUNTIME_DIR=/run/user/1000
LC_MEASUREMENT=en_US.UTF-8
LC_TELEPHONE=en_US.UTF-8
XDG_CURRENT_DESKTOP=GNOME
UNICODEMAP_JP=cp932
DEFAULTS_PATH=/usr/share/gconf/default.default.path
LC_PAPER=en_US.UTF-8
XAUTHORITY=/run/user/1000/gdm/Xauthority
LC_ADDRESS=en_US.UTF-8
LC_IDENTIFICATION=en_US.UTF-8
QT_STYLE_OVERRIDE=gtk
LC_NAME=en_US.UTF-8
GIO_LAUNCHED_DESKTOP_FILE_PID=13310
LC_MONETARY=en_US.UTF-8
XDG_SESSION_DESKTOP=default
GTK_MODULES=gail:atk-bridge
XDG_MENU_PREFIX=gnome-
XDG_SESSION_ID=1
QT_LINUX_ACCESSIBILITY_ALWAYS_ON=1
XDG_CONFIG_DIRS=/etc/xdg/xdg-default:/etc/xdg
DISPLAY=:1
LD_LIBRARY_PATH=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64
PWD=/home/dave
USER=dave
SHLVL=1
_=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/qcad-bin
MANDATORY_PATH=/usr/share/gconf/default.mandatory.path
LANG=en_US.UTF-8
SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-S2ePMZG3dG,guid=e590a63ac7ca3b971f776cae58d663c0
GDMSESSION=default
GNOME_DESKTOP_SESSION_ID=this-is-deprecated
SESSION_MANAGER=local/OPA:@/tmp/.ICE-unix/1681,unix/OPA:/tmp/.ICE-unix/1681
USERNAME=dave
PATH=/home/dave/bin:/home/dave/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin

 1646 QCAD/CAMBug ReportMedium 3.18 has a HATCH issue Closed
100%
Task Description

If you pres the “hatch icon” then the word “hatch” appears in the command window, but. . . nothing happens.

But if you type “hatch” followed by “enter” then finally the Hatch Window pops up.

 1820 QCAD/CAMBug ReportMedium CAM Export: exporting text entities broken Closed
100%
Task Description

Hi Andrew,

Kubuntu, QCAD/CAM 3.21.3

Font Standard. Selected as ‘single line’ font for engraving with mill or laser.

While CAM Exporting as G-code Laser (Offset) MM, or as Linux CNC, Exporting gets trapped in a loop.

In Font Standard the glyph’s ? & $ @ s S Q and 2 contains unwanted Z-movements. It seems these glyphs entities are not alligned properly; endpoint last line does not meet startpoint next line; why else the Z-movements?

Could this misallignment also traps Exporting?

 1848 QCAD/CAMFeature RequestMedium PWM Laser Closed
100%
Task Description

Hi Andrew,

I have added a PWM Laser post processor.

You can add it to QCAD’s post processor directory

 1970 QCAD/CAMPerformance IssueMedium Drill Toolpath Workaround Closed
100%
Task Description

Hallo Andrew,

Fiddling with the drill-toolpath error, a solution seems to be to add the drill location as a ‘single point’ in the ‘source’ sublayer. I am using this as a Bug Work Around.

 3 BookFeature RequestLow Automatically generate images for "CAD Introduction" Closed
100%
Task Description

QCAD introduction Book

  • automatically generate screen shots of book in desired language
  • don’t use absolute paths in URLs
  • SVN:set up a new version for QCAD3
    1. start dialog → PNG
    2. set PNG resolution
    3. set PNG non-alpha-channel format
  • languages en/de/es/fr
  • script: $ generate_book_images.sh [en|de|es|fr]
  • Try to switch on / off antialiasing to render text / circles (whichever prints better):
 

User Reference Manual

done

  • paste/doc/description.html:
<p>
			The paste command inserts
			the entities previously copied to the
			clipboard. Paste is
...
  • ReferenceManual.js:
    • insert description HTML file under section “description”
    • save HTML files in right folder → paste/doc/Paste_de.xhtml
    • merge all HTML files to a reference manual
      • /home/martin/workspace/rsframework/support/doc/manual/qcad_user_manual.qhp
  • Iterate through all actions:
var actions = RGuiAction.getActions()
  • generate high-res PNG for every SVG tool icon:
BiLibrary.createAndSaveButton(iconSvgFile, pngFile);
  • generate some basic HTML for every tool:
<h2>[Title]</h2>
<b>Toolbar:</b>
[icon]
<b>Menu:</b> [Top menu] - [Menu entry]
<b>Hotkey:</b> [two letter code or hotkey]
 10 BookBug ReportLow Book numbering in PDF is incorrect Closed
100%
Task Description

The numbers in the book don’t match with the bookmarks numbers in the PDF as shown in Acrobat Reader.

Showing tasks 201 - 250 of 2100 Page 5 of 42<<First - 3 - 4 - 5 - 6 - 7 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing