QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  descSummaryStatusProgress
 139 QCAD (main)Bug ReportLow Linetype / drawing unit Closed
100%
Task Description

Line type rendering with drawing unit != mm

 140 QCAD (main)Bug ReportLow Arc rendering with QPainterPath::arcTo not precise enou ...Closed
100%
Task Description

Arcs rendered with QPainterPath::arcTo are not precise. Especially the start- / end point offsets are confusing. Differences are up to 0.01 units.

 147 QCAD (main)Bug ReportLow OpenDesign 4.4 won't comiple under Linux Closed
100%
Task Description
opendesign/Extensions/ExServices/ExSystemServices.cpp:28:20: fatal error: StdAfx.h: No such file or directory

I can work with be “old” binary for now (seems to work with the new libraries even it was not compiled newly), so it’s not that urgent.

 149 ECMAScriptBug ReportLow SIGABRT when trying to use entiy.setColor() Closed
100%
Task Description

Script context:
Compare.js#413:

"green"

ECMA code:

         QScriptValue
        REcmaSharedPointerEntity::setColor
        (QScriptContext* context, QScriptEngine* engine) 
        {
            QScriptValue result = engine->undefinedValue();
                    // public function: can be called from ECMA wrapper of ECMA shell:
                    REntity* self = 
                        getSelf("setColor", context);
=>               Q_ASSERT(self!=NULL);

Stacktrace:

Thread [1] 18673 (Suspended : Signal : SIGABRT:Aborted)	
	__kernel_vsyscall() at 0xffffe424	
	raise() at 0xb4efc8df	
	abort() at 0xb4efe220	
	RMainWindow::messageHandler() at RMainWindow.cpp:63 0x8f3917a	
	qt_message_output() at 0xb5356f65	
	0xb53571ab	
	qFatal() at 0xb53572c9	
	qt_assert() at 0xb5357355	
	REcmaSharedPointerEntity::setColor() at REcmaSharedPointerEntity.cpp:1,360 0x8bc0602	
	0xb6bd813c	
	0xb6ac1f68	
	0xb6a9164c	
	0xa622afd2	
	0xb6a423e3	
	0xb6af06e0	
	0xb6ac201e	
	0xb6be0cd3	
	0xb6be11a9	
	QMetaObject::metacall() at 0xb5478c83	
	QMetaObject::activate() at 0xb5489134	
	<...more frames...>	
 150 QCAD (main)Bug ReportLow problematical arc angle values after divide circle Closed
100%
Task Description
  1. new circle
  2. modify → divide circle in 4th quadrant


arc start angle = 317.726311, end angle = 677.726311
→ QCAD hangs if one try to move the arc start / end point

 151 QCAD (main)Bug ReportLow Uncaught exception at Divide.js:135 Closed
100%
Task Description
  1. new circle
  2. modify → divide
'op.deleteEntity'
 152 QCAD (main)Bug ReportLow IsoProject uncaught exception Closed
100%
Task Description
  1. draw circle
  2. modify → iso projection
Uncaught exception at scripts/Modify/IsoProject/IsoProject.js:140: TypeError: Result of expression 'shape.approximateWithLines' [undefined] is not a function.
140	        var pl = shape.approximateWithLines(this.segmentLength);
  • same with an arc
 153 QCAD (main)Bug ReportLow Save triangle shape after exploding dimension Closed
100%
Task Description

Save triangle shape after exploding dimension

 155 QCAD (main)Bug ReportLow Copy / paste: convert units Closed
100%
Task Description

Copy / paste: convert units

- copy: copy drawing unit to clipboard
- paste: convert pasted entities from clipboard unit to drawing unit

 159 QCAD (main)Bug ReportLow Dimension text labels Closed
100%
Task Description

“” → default label
“.” → no label

 161 QCAD (main)Bug ReportLow Polyline - Equidistant Closed
100%
Task Description

No preview, produces invalid polyline

 162 QCAD (main)Bug ReportLow Selection tools: select entities on hidden layers Closed
100%
Task Description

Rectangle select selects entities on hidden layers
Select all selects entities on hidden layers

 163 QCAD (main)Bug ReportLow Selection with locked layers Closed
100%
Task Description

- two lines on top of each other
- one line on locked layer
- one line on unlocked layer

Selection of the line on unlocked layer should be easily possible.

 164 QCAD (main)Bug ReportLow Hatch / draft mode Closed
100%
Task Description
  1. open example01.dxf
  2. toggle draft mode
  3. toggle draft mode

hatch is now visible in draft mode and not visible in normal mode

 165 QCAD (main)Bug ReportLow dimension arrows / draft mode Closed
100%
Task Description

dimension arrows not visible in draft mode

 166 QCAD (main)Bug ReportLow break out Closed
100%
Task Description

break out for top segment of arc broken

 167 QCAD (main)Bug ReportLow trim: changes layer Closed
100%
Task Description

trimmed entity ends up on current layer instead of original

 168 QCAD (main)Bug ReportLow block visibility Closed
100%
Task Description

disable for now or implement

 177 QCAD (main)Bug ReportLow generate example drawings: uncaught exception Closed
100%
Task Description
  • Type: Property Overview → Colors
Uncaught exception at /home/martin/workspace/rsframework/scripts/Developer/ExampleDrawings/ExampleDrawings.js:332:
Error: :-1:-1: self is NULL
<native>(RColor(ByLayer) ) at -1
<anonymous>(argCols = 0, argRows = 0, argProp = RColor(ByLayer) , 'colors') at
/home/martin/workspace/rsframework/scripts/Developer/ExampleDrawings/ExampleDrawings.js:332
<anonymous>(argType = 'colors') at
/home/martin/workspace/rsframework/scripts/Developer/ExampleDrawings/ExampleDrawings.js:256
<anonymous>() at
/home/martin/workspace/rsframework/scripts/Developer/ExampleDrawings/ExampleDrawings.js:55
<native>() at -1
main() at scripts/autostart.js:501
<global>() at scripts/autostart.js:520
332	        entity.setColor(argProp);

qsdb> entity
REntityPointer(0x0)

qsdb> objs
22,28

qsdb> .backtrace
#0  <anonymous>(argCols = 0, argRows = 0, argProp = RColor(ByLayer) , 'colors') at
/home/martin/workspace/rsframework/scripts/Developer/ExampleDrawings/ExampleDrawings.js:332
#1  <anonymous>(argType = 'colors') at
/home/martin/workspace/rsframework/scripts/Developer/ExampleDrawings/ExampleDrawings.js:256
#2  <anonymous>() at
/home/martin/workspace/rsframework/scripts/Developer/ExampleDrawings/ExampleDrawings.js:55
#3  <native>() at -1
#4  main() at scripts/autostart.js:501
#5  <global>() at scripts/autostart.js:520
 180 QCAD (main)Bug ReportLow image insert / keep proportion avoids to enter a width Closed
100%
Task Description
  1. insert a bitmap
  2. open a file (PNG, width 262, height 320)
  3. change the width where “keep proportions” is enabled
    • try to enter “100”
    • as soon as the key “1” is pressed, the value is adjusted to “0.999997”, the cursor is set to the end of the number
 182 QCAD (main)Bug ReportLow check for new version Closed
100%
Task Description

Check for new version of QCAD:

  • during start up
  • through menu ‘Help - Check for new version’

Server:

  • URL which contains current version number as plain text

Client:

  • request URL
  • compare versions
  • different version available:
    • minor update: you can download an update... (1st online page)
    • major update: you can purchase an update... (2nd online page)
 185 QCAD (main)Bug ReportLow text editing Closed
100%
Task Description
  1. create text, font Arial
  2. edit text
  3. change only bold / italic flag in text dialog
  4. no change in edited text
 187 QCAD (main)Bug ReportLow Error Linetypes and Hatch angle from drawing Qcad2 Prof ...Closed
100%
Task Description

Hi, I open a drawing with Qcad2 and:
- The hatch angle is changed
- The linetype is continuos for all lines
- The “white paper” in print view not show

I add a screenshot

Greetings

 190 QCAD (main)Bug ReportLow SVG PG export dimension labels alignment Closed
100%
Task Description

Dimension labels in QCAD are (always?) centered on the dimension line, while in exported SVGs the text starts from the center and extends into the writing direction. This can trivially be fixed by adding the attribute “text-anchor:middle” to the respective SVG “text” nodes.

 191 QCAD (main)Bug ReportLow SVG PG export text vertical and horizontal alignment Closed
100%
Task Description

QCAD offers horizontal and vertical alignment choices for text. This is not carried over to PG exported SVGs. Currently QCAD sets the “dy” attribute on text nodes in a way, such that any text in SVG will look like the QCAD vertical alignment was set to “Top” and the horizontal one to “Left”.

Naively one can just omit the “dy” attribute and in SVG this will look like the QCAD vertical alignment was set to “bottom”. At least for single line texts that should be good.

The horizontal alignments can be recreated in SVG with the “text-anchor” attribute for text nodes. The values “start”, “middle” and “end” correspond to the QCAD “left”, “center” and “right” choices.

 192 QCAD (main)Bug ReportLow SVG PG export stroke width should not scale Closed
100%
Task Description

When PG exporting to SVG, stroke-widths are scaled with the drawing, while they should not.

 193 QCAD (main)Bug ReportLow SVG PG export scale hatches Closed
100%
Task Description

The SVG PG exporter does not scale hatches.

 194 QCAD (main)Bug ReportLow SVG PG export scale text Closed
100%
Task Description

Text scaling in PG SVG exporter is missing just two small additions: These attributes are not taken care of by now:

font-size, dy

Just use the current value times scale: eg 2.5 * 0.1 to have a scale of 1:10. Looks good here.

 195 QCAD (main)Bug ReportLow SVG PG export scale points Closed
100%
Task Description

Points are not scaled when PG exported to SVG:

Points as crosses are created eg. like this:

d=m 2.5,3 1,0 M 3,2.5 l 0,1

and in SVG look fine like that (scale 1/10):

d=m 2.95,3 0.1,0 M 3,2.95 3,3.05

stroke-width should be left unchanged.

 196 QCAD (main)Bug ReportLow Templates Closed
100%
Task Description

Edit–>Application Preferences–>Load/Save–>Templates click add Crash!!!!

Reported in TP1 (debian squeeze)

I now use Linuxmint 11


[email protected]:~$ uname -a
Linux xzn 2.6.38-11-generic #48-Ubuntu SMP Fri Jul 29 19:05:14 UTC 2011 i686 i686 i386 GNU/Linux

 198 QCAD (main)Bug ReportLow SVG PG export dimensions Closed
100%
Task Description

SVG PG exporter, scaled or unscaled, currently only exports the labels of dimensions. Missing are

ticks, arrows, and lines of the dimension.

It will not be as simple as inkscape does it, wrap it all in a <def>.

 200 QCAD (main)Bug ReportLow Patterned lines uncorrectly scaled in print preview Closed
100%
Task Description

In print preview lines are correctly scaled to stay the same width when printed, ie 0.25 or so mm thick. Print preview shows that very good.

But the round line-caps mess up the display, as in small scale the line-caps start to meet and make the line look like a continous one.

Print preview should not only correct line weight but also line patterns, so that the distance between dashes increase by scale.

 202 QCAD (main)Bug ReportLow SVG PG export font colors Closed
100%
Task Description

White text gets exported as white text, while it should be exported as black text. Just like it is with lines. Attached patch makes text rendering use the conversion function that is already in the code base.

 203 QCAD (main)Bug ReportLow Save font styles bold and italic Closed
100%
Task Description

Font styles “bold” and “italic” are not saved to file.

According to http://docs.autodesk.com/ACD/2011/DEU/filesDXF/WS1a9193826455f5ff18cb41610ec0a2e719-7a4d.htm it is saved in dxf as group code 1071 and according to http://www.autodesk.com/techpubs/autocad/dxf/dxf2002.pdf page 20 its type is “Extended data 32-bit signed long”.

 204 QCAD (main)Bug ReportLow SVG PG export font styles Closed
100%
Task Description

Patch to PG export font styles “bold” and “italic” to SVG. (This only works when a file with the right style is loaded into QCAD, as QCAD will yank such style information upon saving.)

 210 QCAD (main)Bug ReportLow Pasting a block form the library browser changes drawin ...Closed
100%
Task Description

I noticed like this:

in a block pasted from the library, text would be under differently coloured lines, although it should be above them, and this does not look nice.

Drawing order inside of a block should not be changed by a paste operation, not?

 211 QCAD (main)Bug ReportLow Empty drawing tab gets title from newly opened document Closed
100%
Task Description

Starting QCAD opens new empty drawing (Untitled 1).

After I open existing drawing, “Untitled 1” tab title changes to the name of newly opened drawing.

 212 QCAD (main)Bug ReportLow application preferences Closed
100%
Task Description

command preferences (application preferences) work one time if close, then need to close and open qcad for new preferences.

 214 QCAD (main)Bug ReportLow Adding dimensions to circles or arcs in a block Closed
100%
Task Description

In previous versions I was able to add a diametric dimension to an arc or circle that is part of a block in the overal drawing.
When I try this now, the pogram resonds “Entity is not an arc or circle” the radius dimension gives the same error.
This is unfortunate, because typically dimensions are on another layer in the overal drawing.

 215 QCAD (main)Bug ReportLow Space to revert to keyboard entry Closed
100%
Task Description

Space bar does not change to keyboard input for coordinates, etc.

 217 QCAD (main)Bug ReportLow SVG export ignores exportPoints setting Closed
100%
Task Description

Both SvgExporters ignore the exportPoints setting. Attached patch takes care of that. To be applied from within the “scripts” directory.

Nitpicking in File/SvgExport/SvgExport.js, var properties is meant to be a plain Object instead of an Array, isn’t it?

 218 QCAD (main)Bug ReportLow Angle dimension shows arrows (no ticks) Closed
100%
Task Description

Angle dimension shows always arrows instead of architectural ticks.

 219 QCAD (main)Bug ReportLow Library browser not in View - Toolbars menu Closed
100%
Task Description

Library browser not in View - Toolbars menu

 220 QCAD (main)Bug ReportLow Error when loading a file Closed
100%
Task Description

Hi,

When I try opening a file with blank caracters in directory name, Beta 3 reports a bug (see pictures attached). Error occurs only if I click on file icon. But no error occurs if I open directly in QCAD.

Regards,

 223 QCAD (main)Bug ReportLow No return to main window after opening a block window. Closed
100%
Task Description

I have a drawing imported from 2.2. I have tried to edit a block and the block window duly opens. However I can’t get back to my main drawing window. In the earlier version I could select a main drawing window. The window menu did not offer any other window to select. The window shown in the list was the name of the main file and clicking on it did nothing. The Tile and Cascade options worked but showed no other windows.

 229 QCAD (main)Bug ReportLow No grid display toggle Closed
100%
Task Description

No way to toggle the grid view on or off?

 238 QCAD (main)Bug ReportLow Files given on command line don't open Closed
100%
Task Description

Files given on command line don’t open if paths are relative (CWD problem)

 240 QCAD (main)Bug ReportLow Tool 'Show only active layer' not in layer toolbar Closed
100%
Task Description

Tool ‘Show only active layer’ not in layer toolbar.

 241 QCAD (main)Bug ReportLow Autosave 10min saves every 1min Closed
100%
Task Description

Autosave 10min saves every 1min

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1604

 242 QCAD (main)Bug ReportLow Dimension: no feet displayed in architectural format Closed
100%
Task Description

Dimension: no feet displayed in architectural format

(e.g. 79 19/32 instead 72 7 19/32)

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1605

Showing tasks 301 - 350 of 2000 Page 7 of 40<<First - 5 - 6 - 7 - 8 - 9 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing