|
1498 | QCAD (main) | Bug Report | Very Low | Grid mask lines when zoom | Closed | |
|
Task Description
All lines are masked when I zoom. Not easy to work!
|
|
1499 | QCAD (main) | Suggestion | Low | Add script generator for Qt 5.6.2 | Closed | |
|
Task Description
As it says on the tin - please add script generator for Qt 5.6.2.
|
|
1500 | QCAD (main) | Bug Report | Very Low | Some plugins not built right in debug mode | Closed | |
|
Task Description
Building current HEAD (5468b69) with:
/usr/local/lib/qt5/bin/qmake \
QMAKE_CXXFLAGS="-g -ggdb3 -I/usr/local/include" \
QMAKE_LIBS="-lcxxrt -L/usr/local/lib" \
-r
make debug
tinky:~/w/qcad/qcad$ ../qcad.sh
Launching QCAD debug
QCAD version 3.15.5.7
RPluginLoader.cpp:67, static QStringList RPluginLoader::getPluginFiles():
11:25:06: Debug: Ignoring release plugin built in debug mode: "libqcadexample.so"
RPluginLoader.cpp:67, static QStringList RPluginLoader::getPluginFiles():
11:25:06: Debug: Ignoring release plugin built in debug mode: "libtransactionlistener.so"
RDxfPlugin.cpp:9, virtual bool RDxfPlugin::init():
11:25:06: Debug: RDxfPlugin::init
RDebug.cpp:81, static int RDebug::stopTimer(int, const QString &, int):
11:25:15: Debug: TIMER: 1038000000 ns ( 1038 ms ) - "loading add-ons"
RDebug.cpp:81, static int RDebug::stopTimer(int, const QString &, int):
11:25:19: Debug: TIMER: 18446744073365584320 ns ( 18446744073365 ms ) - "initializing add-ons"
RScriptHandlerEcma.cpp:1468, static QScriptValue RScriptHandlerEcma::ecmaMessageHandler(QScriptContext *, QScriptEngine *, RS::MessageType):
For whatever reason, libqcadexample.so and libtransactionlistener.so don’t get named _debug.so (which seems to be the cause for the message), while libqcaddxf_debug.so seems to be OK.
The following diff sorts this out, with no apparent ill effect:
diff --git a/support/examples/exampleplugin/exampleplugin.pro b/support/examples/exampleplugin/exampleplugin.pro
index 0c58c56..d72a866 100644
--- a/support/examples/exampleplugin/exampleplugin.pro
+++ b/support/examples/exampleplugin/exampleplugin.pro
@@ -1,7 +1,8 @@
-include(../../../shared.pri)
CONFIG += plugin
TARGET = $${RLIBNAME}example
+include(../../../shared.pri)
+
TEMPLATE = lib
HEADERS = RExamplePlugin.h
SOURCES = RExamplePlugin.cpp
diff --git a/support/examples/transactionlistener/transactionlistener.pro b/support/examples/transactionlistener/transactionlistener.pro
index ed6c84d..7ee9bef 100644
--- a/support/examples/transactionlistener/transactionlistener.pro
+++ b/support/examples/transactionlistener/transactionlistener.pro
@@ -1,7 +1,8 @@
-include(../../../shared.pri)
CONFIG += plugin
TARGET = transactionlistener
+include(../../../shared.pri)
+
TEMPLATE = lib
HEADERS = TransactionListenerPlugin.h
SOURCES = TransactionListenerPlugin.cpp
|
|
1501 | QCAD (main) | Bug Report | Low | non-layer line type assignment lost on Modify->Copy | Closed | |
|
Task Description
If a non-layer assigned line type is used, when the object(s) are duplicated the line type reverts back to ‘By Layer’.
|
|
1507 | QCAD (main) | Task | Low | Improve arc rendering for screen-based linetypes | Closed | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=73&t=4566
|
|
1508 | QCAD (main) | Bug Report | Low | QCAD CE: Subscript and superscript formatting lost when ... | Closed | |
|
Task Description
When multiple superscripts or subscripts are used in a text field, re-opening the saved dxf file will fail to render all but the first super/subscript element. As per attached example. Bug occurs on all Mac OS X from Mavericks onward.
Minimal reproducible steps: 1. Open new document in QCAD 2. Add a text object 3. Make part of the text sub or super-script 4. Make another part of the text also sub/superscript, with at least one ‘normal’ character between the two sub/superscripts 5. Save file and close it. Don’t have to quit QCAD. 6. Reopen the file. Voila, all but the first sub/superscript element is broken.
Dan.
ps. QCAD is a pretty great piece of software, nice work all.
|
|
1509 | QCAD (main) | Bug Report | Low | Ellipse / circle, ellipse / ellipse intersections | Closed | |
|
Task Description
Not all intersections points between ellipses and circles or other ellipses are found. This is due to too tight tolerances.
See: http://www.qcad.org/rsforum/viewtopic.php?f=76&t=4574
|
|
1511 | QCAD (main) | Bug Report | Low | Preferences not saved | Closed | |
|
Task Description
as read in http://www.qcad.org/rsforum/viewtopic.php?t=2957, I want to edit my preferences, but it does not save from one session to the other.
I meet the same problem state here, http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2269&p=7287&hilit=preferences+save#p7287 but the solution two have one change at the time does not work for me. octal permits are: 120 -rwxrwxrwx@ 1 dr staff
should I change the group ?
In ini file at line 78, it points to a java script: scripts/Pro/Edit/AppPreferences/ShortcutPreferences, where is that stored ?
|
|
1513 | QCAD (main) | Bug Report | Low | Layer > Create Layer from Selection: Layer created, sel ... | Closed | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4583
|
|
1514 | QCAD (main) | Bug Report | Low | Block attributes: association with block reference lost ... | Closed | |
|
Task Description
Create block reference with attribute Copy block reference and attribute Paste
The copied attribute is now associated with the first block reference instead of the second.
|
|
1516 | QCAD (main) | Suggestion | Low | QT style on Linux | Closed | |
|
Task Description
The startup script still forces a QT-style; Getting bored of that one, qcad runs fine with the system default style - probably that was a qt4 thing, that can be removed, so it blends better with the DE?
18c18 /opt/qcad/qcad < LD_LIBRARY_PATH=”$DIR” “$binary” -style plastique “$@” —
LD_LIBRARY_PATH=”$DIR” “$binary” “$@”
|
|
1517 | QCAD (main) | Bug Report | Low | Modify > Break out Segment: fails with closed polyline | Closed | |
1 |
Task Description
Occurs when breaking out segment from closed polyline with more than two intersecting entities.
This also affects the hatch from segments tool when used with closed polylines.
Example: https://raw.githubusercontent.com/qcad/qcad/master/scripts/Modify/BreakOut/Tests/data/closed_polyline.dxf
|
|
1518 | QCAD (main) | Bug Report | Very Low | Landscape/Portrait gets confused for custom page size | Closed | |
|
Task Description
Hello
In the Print Preview or Drawing Preferences / Page Settings if I select a Custom size, then landscape/portrait does not really make sense.
For instance, at work we have a laser cutter which uses a printer driver. The bed of the laser is 600 wide by 300 high. When I wanted to cut something, I created a custom page size of 600×300 and selected Landscape (because it is wider than high)
Strangely, back in the Print Preview, the page is now sized opposite with regards to Portrait / Landscape mode, which was confusing somewhat.
(see pictures attached)
I think that for ‘Custom’ page size in Drawing Preferences, the option of Portrait or Landscape should probably be ghosted
Then, I think that for Portrait / Landscape mode in the Print Preview, it should display the shape most appropriate, rather than just assuming that the document fits the norm:
Taller than Wide for Portrait mode
Wider than Tall for Landscape mode
|
|
1519 | QCAD (main) | Bug Report | Low | Ruler precision always zero | Closed | |
|
Task Description
Rulers show only whole numbers.
|
|
1520 | QCAD (main) | Bug Report | Low | Modify > Rotate: rotating splines changes start/end tan ... | Closed | |
|
Task Description
- Create spline from fit points - Rotate spline - Spline shape changes due to erroneous start/end tangents
Similar problem when reversing spline from fit points.
|
|
1521 | QCAD (main) | Bug Report | Low | Modify > Offset: fails in certain cases with short arcs | Closed | |
|
Task Description
Offset curve not trimmed / clipped correctly.
Offset distance: 2.5
|
|
1522 | QCAD (main) | Bug Report | Low | "Hatch from Segments" problem with polylines ... | Closed | |
|
Task Description
I tried to hatch an area and the Reference Manual said all entities can be used but it doesn’t works at my example. Did I missed something?
The test drawing shows at the top the goal with exploded polylines. At the bottom I have rectangles (Polylines, drawn with the Rectangle tool) what is unfortunately not working.
|
|
1523 | QCAD (main) | Bug Report | Low | Draw > Hatch > Hatch from Segments: fails for circle in ... | Closed | |
|
Task Description
- Draw circle inside other circle - Draw > Hatch > Hatch from Segments - Click both circles - Right-click
|
|
1524 | QCAD (main) | Bug Report | Low | Command line: cannot enter @ sign in command line on Ge ... | Closed | |
|
Task Description
@ sign cannot be entered into command line on German keyboards on which Alt-Q has to be pressed to enter @.
This is a Qt/Linux bug which interprets Alt-Q as part of a shortcut starting with Q.
Workaround: change shortcut of Reset tool from QQ to something else, not starting with Q.
|
|
1527 | QCAD (main) | Suggestion | Low | "Zeichnungseinheit konvertieren" translation missing .. ... | Closed | |
|
Task Description
... for the Option bar.
|
|
1530 | QCAD (main) | Bug Report | Low | Draw > Circle > 3 Tangents: solutions not found | Closed | |
1 |
Task Description
Given is a drawing of two concentric arcs connected at the ends. (see attached drawing Circle_from_3_Tangents_1.png)
When I try to add a circle at one end by the “Circle from 3 Tangents”-tool, it does nothing.
I also tried it with another drawing (see attached drawing Circle_from_3_Tangents_2.png) - same negative result.
I then tried drawing Circle_from_3_Tangents_3.png. Here the tool only produces outside circles and misses the inside ones.
Hope you can confirm my findings.
|
|
1532 | QCAD (main) | Bug Report | Low | Selection Problem ? | Closed | |
|
Task Description
Please attached file. When dragging a selection window across only the cyan lines -I get only one line selected?
|
|
1533 | QCAD (main) | Bug Report | Low | I can not print and I can not export to "pdf" file (Qca ... | Closed | |
|
Task Description
I can not print and I can not export to “pdf” file. I use the latest professional version of Qcad with windows 10. Thank you
|
|
1534 | QCAD (main) | Suggestion | Low | Headless Styling | Closed | |
|
Task Description
Since the launcher batch no longer requests “-style plastique” QT wants to apply the native style of the desktop environment. This fails on a headless system (or where the current user has no graphical shell to connect to) with the message “Gtk-WARNING **: cannot open display: “. Fortunately, QT provides a workaround in addtion to the new “platform=offscreen” flag.
In the tools that set -no-gui, beforehand export these variables into the environment
export QT_STYLE_OVERRIDE=""
export QT_QPA_PLATFORM=offscreen
export DISPLAY=""
PS: QT-offscreen will not find fonts; unfortunately the workaround only allows for a single directory to search them (I need helvetica):
export QT_QPA_FONTDIR="/usr/local/share/fonts/type1"
Maybe that should get reported upstream, so that like LD_LIBRARY_PATH several directories could be specified.
|
|
1536 | QCAD (main) | Bug Report | High | Draw > Polyline > Delete Node(s): crash when deleting 2 ... | Closed | |
|
Task Description
QCAD crashes when you perform the following operations:
1. Create Polyline with just one segment.
2. Delete the node with DELETE NODE(S) command.
3. Press ESC several times.
(-> QCAD crashes..)
|
|
1539 | QCAD (main) | Feature Request | Low | One more "Offset" option: Infinitive Line ... | Closed | |
1 |
Task Description
hi,
I miss one Offset option to use an offset indirectly related to the used entity. Right now I have to work with further construction lines and trim, divide, delete etc. tools to archive what I need. Basically an offset as a ray would be enough but unfortunately we have no control of the Ray orientation. This said - it would be nice to have an infinitive line added to the “Offset Polyline Segment” option to be able to use an Offset as construction line which is not only reflecting the shape of the source.
|
|
1540 | QCAD (main) | Bug Report | Low | Draw > Line > Parallel: Changing back to Auto has no ef ... | Closed | |
|
Task Description
Draw > Line > Parallel - switch type to Line, XLine or Ray - switch back to Auto - Parallel is always line segment
|
|
1544 | QCAD (main) | Bug Report | Low | Crash when selecting spline | Closed | |
|
Task Description
This is an interesting bug on my machine. The attached file crashes on 3.15.5, works perfectly well on 3.11.0 and 3.7.5
To see the problem open the file and click on the upper spline. QCAD disappears.
dajo
|
|
1545 | QCAD (main) | Bug Report | Low | File > Open: Crash on some Linux setups | Closed | |
|
Task Description
A curious fact is occurring here QCad 3.16.5 is aborting the opening of files in 90% of the attempts on a machine with native Linux Mint 18.1 and works normally in a virtual machine under Virtualbox in Windows 10, tests were done on the 3 machines (VM-Linux, Nat-Linux and Win 10) with QCad 3.15.5 and everything works normally. The two notebooks tested have Intel I-7 RAM = 8Gb Ram and 4 processors. Follow 02 files for evaluation.
|
|
1546 | QCAD (main) | Bug Report | Low | 'Open file' dialog shows no files - although the direct ... | Closed | |
|
Task Description
I have many .dxf files created in QCad-2.2.2.0 (which I still use) all of which open in LibreCad without issues.
If I try to open a file in the version below (or an earlier fairly recent version) the file chooser dialog is empty.
Version: 3.16.5.0 (3.16.5) Build Date: Feb 20 2017 Qt Version: 5.6.2 Architecture: x86_64 Compiler: gcc 5.4.0 OS: Mageia 6 x86_64 with plasma5 D.E
However if I copy a file name from the same directory using Dolphin file manager and paste it into the filename field in the chooser (which is showing no files) the file opens up correctly.
I reported this in Mageia bugzilla here against an earlier version but there was no response as I think the maintainer is MIA. https://bugs.mageia.org/show_bug.cgi?id=18816
Today I decided to try the latest version in the hope that this issue would be fixed (I am also a packager with Mageia) but it is still the same.
I will add the build log as an attachment in case you see something that may be specific to our configuration.
It would be good if we could resolve this before the imminent release of Mageia 6 ;)
Running from CLI I see these around the time I open the file chooser dialog: ——–snip———
22:05:02: Debug: TransactionListenerPlugin::postInit 22:05:02: Debug: got transaction 22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:19: Debug: got transaction 22:05:47: Debug: got transaction 22:06:08: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:06:09: Debug: got transaction ———-snip——–
|
|
1548 | QCAD (main) | Bug Report | Low | Block > Attributes > Synchronize Attributes: exception | Closed | |
1 |
Task Description
Block attributes are not properly synchronized on QCad 3.16.5 after editing the block in the drawing, in Linux Mint 18.1 and in Windows 10; On Windows as less frequency, the error is intermittent, on Linux is constant. Attach the dxf to test.
|
|
1550 | QCAD (main) | Bug Report | Low | Block references: mirrored block references in 3rd part ... | Closed | |
|
Task Description
Files imported from other CAD applications might contain blocks that are mirrored if the block reference uses an inverted extrusion direction.
|
|
1551 | QCAD (main) | Bug Report | Low | File > Bitmap Export: exception when image size too lar ... | Closed | |
|
Task Description
Hi friends,
I have this traceback with my Qcad from ppa for linux, to export in png image: Warning: libpng warning: Image width is zero in IHDR Warning: libpng warning: Image height is zero in IHDR libpng error: Invalid IHDR data Error: cannot save file: /home/patrinux/Bureau/IMAGE.png Error: Unknown error Debug: got transaction Warning: RScriptHandlerEcma::eval: script engine exception: “Error: :-1:-1: Wrong number/types of arguments for RMainWindowQt.handleUserWarning(). <native>() at -1 <anonymous>() at scripts/File/BitmapExport/BitmapExport.js:56 <native>(RActionAdapter(0x26d1ea0)) at -1 <global>() at 1” Warning: “<anonymous>()@scripts/File/BitmapExport/BitmapExport.js:56” Debug: got transaction
Impossible to obtain an png image, and others too. I am on Linux Mint Serena 64B alias Ubuntu Xenial 16.04. Qcad last release:
Version : 3.16.4.4 (3.16.4.4) Internet : QCAD.org Date de fabrication : Jan 26 2017 RĂ©vision :
Qt Version : 4.8.7 Architecture : x86_64 Compiler : gcc 5.4.0
|
|
1553 | QCAD (main) | Bug Report | Low | Modify > Break out Manual: exception with circles | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4776
|
|
1554 | QCAD (main) | Bug Report | Low | Auto focus of options toolbar when entering numbers bro ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4774
|
|
1556 | QCAD (main) | Bug Report | Low | Linux lubuntu - menu doesn't work properly | Closed | |
|
Task Description
This is not the only menu that didn’t work properly: moving the mouse cursor on the lower arrow made the list moving up; but is impossible to make the list moving down when I put the mouse over the upper arrow. The only workaround (time consuming but effective) is to select the first upper paper size: selecting again the menu I can see tha current selection in the second position: I select the one above it; and so on, until I find what I need.
|
|
1557 | QCAD (main) | Bug Report | Low | Zero length lines not shown | Closed | |
|
Task Description
Zero length lines are not shown in QCAD. For best compatibility these should be shown as dots.
|
|
1558 | QCAD (main) | Bug Report | Low | unlayed lines | Closed | |
1 |
Task Description
DWG archive opened by QCAD (15.X/16.X - Linux mint 18.1 and Windows 10) does not show traits that represent project windows, when the same file is opened by the dwg True view they appear, follows archive for evaluation.
|
|
1559 | QCAD (main) | Bug Report | Low | Font substitution in command line tools | Closed | |
|
Task Description
Font substitutions broken for many cases. Font “Standard” can never be substituted.
|
|
1561 | QCAD (main) | Bug Report | Low | Edit > Drawing Preferences: menu missing (macOS, French ... | Closed | |
|
Task Description
Qt menu heuristic causes Edit > Drawing Preferences to disappear with French locale under macOS.
Edit > Application Preferences and Help > About are moved to erroneous locations as well.
|
|
1562 | QCAD (main) | Bug Report | Low | 3.16.7 MacOS 64bit Crashes on Launch | Closed | |
|
Task Description
Hi, I have just tried updating from 3.16.2 (working) to the latest version 3.16.7 on MacOS Lion 64bit, and the new version crashes immediately on launch.
Here is the Apple problem report: Process: launchd [438] Path: /Applications/QCAD_new_broken.app/Contents/MacOS/QCAD Identifier: org.qcad Version: ??? (???) Code Type: X86-64 (Native) Parent Process: launchd [236]
Date/Time: 2017-03-22 08:28:00.043 +0000 OS Version: Mac OS X 10.7.5 (11G63) Report Version: 9
Interval Since Last Report: 17907473 sec Crashes Since Last Report: 173 Per-App Crashes Since Last Report: 6 Anonymous UUID: A36E8DD9-5A71-4361-9929-92E4633D8136
Crashed Thread: Unknown
Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x00007fff5fc01028
Backtrace not available
Unknown thread crashed with X86 Thread State (64-bit):
rax: 0x0000000000000055 rbx: 0x0000000000000000 rcx: 0x0000000000000000 rdx: 0x0000000000000000
rdi: 0x0000000000000000 rsi: 0x0000000000000000 rbp: 0x0000000000000000 rsp: 0x0000000000000000
r8: 0x0000000000000000 r9: 0x0000000000000000 r10: 0x0000000000000000 r11: 0x0000000000000000
r12: 0x0000000000000000 r13: 0x0000000000000000 r14: 0x0000000000000000 r15: 0x0000000000000000
rip: 0x00007fff5fc01028 rfl: 0x0000000000010203 cr2: 0x00007fff5fc01028
Logical CPU: 1
Binary images description not available
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 1
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 498
thread_create: 0
thread_set_state: 0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.16f11 Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F98000000000000, 0x4B494E4753544F4E20202020202020202020 Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F98000000000000, 0x4B494E4753544F4E20202020202020202020 AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0×87), Atheros 5416: 2.1.14.9 Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports Network Service: Wi-Fi, AirPort, en1 PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5 Serial ATA Device: ST1000LM014-1EJ164, 1 TB Parallel ATA Device: HL-DT-ST DVDRW GWA4080MA USB Device: Built-in iSight, apple_vendor_id, 0×8502, 0xfd400000 / 3 USB Device: hub_device, 0×0424 (SMSC), 0×2514, 0xfd100000 / 2 USB Device: DataTraveler 2.0, 0×0951 (Kingston Technology Company), 0×1665, 0xfd130000 / 6 USB Device: Samsung M3 Portable, 0x04e8 (Samsung Electronics Co., Ltd.), 0x61b6, 0xfd120000 / 5 USB Device: iPod, apple_vendor_id, 0×1209, 0xfd140000 / 4 USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0×8205, 0x1a100000 / 2 USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x1a200000 / 3 USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x021b, 0x5d200000 / 3 USB Device: IR Receiver, apple_vendor_id, 0×8242, 0x5d100000 / 2
|
|
1563 | QCAD (main) | Bug Report | Critical | Editing box and text insertion does not show fonts | Closed | |
|
Task Description
Editing box and text insertion does not show fonts installed on Linux Mint 18.1, but Linux on the virtual machine works. Versions 3.16.6 and 13.16.7 were tested. The only source shown in the list of options is “standart”.
|
|
1565 | QCAD (main) | Bug Report | Low | Disappearing blocks. | Closed | |
|
Task Description
Blocks disappear (or their content does) after creating again with the same name. In attached file:
1) Created cirle 2) Select circle, BC, select center, name is ‘testblock’ 3) Repeat 2) – circle is now gone
|
|
1566 | QCAD (main) | Bug Report | Low | Block > Attributes > Synchronize Attributes: deleted bl ... | Closed | |
1 |
Task Description
Deleted (undone) block attributes are stored to DXF/DWG.
|
|
1569 | QCAD (main) | Bug Report | Low | File > Print Preview: changing offset in drawing prefer ... | Closed | |
|
Task Description
In print preview mode I click the button for drawing preferences. I go to Printing: Page and change the offset for x,y in the viewport. Then apply but the page has not moved and the autozoom still redirects to the old position. When I redraw the window through the window manager or quit and reopen the printpreview the page has moved to it spot.
|
|
1570 | QCAD (main) | Feature Request | Low | make the stretch tool more flexible in selecting nodes | Closed | |
1 |
Task Description
Stretching multiple points of an entity is not possible to my knowledge. I can use the stretch tool but this gives me a rectangular selection box and this limits my posibilities. For example when entities are over eachother. I hope that in the future this will become more like blender. With a freedraw selection tool and/or shift clicking multiple nodes.
|
|
1571 | QCAD (main) | Bug Report | Low | character map not showing special characters that have ... | Closed | |
|
Task Description
I use a font that changes the characters of latin and greek to technical symbols. http://www.fontspace.com/micronus/y145m-2009 The font is installed and working okee. But in the text tool → special characters button → others I expect to see this modified character map but instead I see the standard unicode characters. When I use a gtk tool gucharmap I can see the character map as expected. Now it is really combersome to enter the special characters.
|
|
1573 | QCAD (main) | Feature Request | Low | add reference point input to copy paste | Closed | |
|
Task Description
It woul be really handy if there is an option to set the reference point of the copy selection. Maybe this can be added to the clipboard widget?
|
|
1574 | QCAD (main) | Bug Report | Very Low | Layer > Remove: deleting sublayer switches to layer 0 | Closed | |
|
Task Description
I have set the delete layer preference to make the next layer in the list the current. This will not work for sublayers. After deleting a sublayer the 0 layer will become current.
|
|
1575 | QCAD (main) | Bug Report | Low | There are no shortcut entries in the application prefer ... | Closed | |
|
Task Description
Shortcuts do work except G,Y (and maybe other I don’t know of)
see https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4842
Warning: Script Exception:
"TypeError: Result of expression 'ShortcutPreferences.kms.getShortcutMap()' [undefined] is not an object."
Warning: "<anonymous>(false) at :scripts/Pro/Edit/AppPreferences/ShortcutPreferences/ShortcutPreferences.js:473\nexec() at -1\n<anonymous>() at /home/cccplex/qcad/qcad-3.16.7-pro-linux-x86_64/scripts/Edit/AppPreferences/../AbstractPreferences.js:76\n<eval>() at 1\n<native>() at -1\nmain() at scripts/autostart.js:767\n<global>() at scripts/autostart.js:780"
Linux lennie 4.10.11-1-ARCH #1 SMP PREEMPT Tue Apr 18 08:39:42 CEST 2017 x86_64 GNU/Linux
|