|
376 | QCAD (main) | Bug Report | Low | Text: alignment: simple text starting with spaces | Closed | |
|
Task Description
Text: alignment: simple text starting with spaces or ending in spaces is not aligned correctly.
|
|
375 | QCAD (main) | Bug Report | Low | Text: white text shown as white on white in text dialog | Closed | |
|
Task Description
Text: white text shown as white on white in text dialog
See: aeg_koe_1_H0_A.dxf
|
|
374 | QCAD (main) | Bug Report | Low | Text: spaces at beginning of line does not indent | Closed | |
|
Task Description
Text: non-breaking spaces (\~) at beginning of line does not indent.
See aeg_koe_1_H0_A.dxf
|
|
373 | QCAD (main) | Bug Report | Medium | QCAD3 does not open dxf-files containing ellipses | Closed | |
|
Task Description
QCAD3 does not open dxf-files containing ellipses! Error Message: Can’t open file, check fileformat, fileextension, accesrights
|
|
372 | QCAD (main) | Bug Report | Low | Loading QCAD 3 layer names with international character ... | Closed | |
|
Task Description
Loading QCAD 3 layer names with international characters fails in QCAD 2.
e.g. æøå
|
|
371 | QCAD (main) | Bug Report | Low | Ctrl-P not working in print preview | Closed | |
|
Task Description
Ctrl-P not working in print preview
Linux only.
|
|
370 | QCAD (main) | Bug Report | Low | Canceling quit leaves windows in half-closed state | Closed | |
|
Task Description
File - New
File - New
Draw line
Quit
Cancel
Switch to first tab
|
|
369 | QCAD (main) | Bug Report | Medium | "Edit Text" Function fails ... | Closed | |
|
Task Description
3 RC1b
Trying to edit a Text calls the Qt Script Debugger with following Message:
Uncaught exception at C:/Programme/QCAD 3rc1b/scripts/Draw/Text\TextDialog/TextDialog.js:170: ReferenceError: Can’t find variable: simpleText 170 simpleText.checked = textDataIn.isSimple();
I’m able to close the Script Debugger but I can’t edit the Text ....
|
|
368 | QCAD (main) | Bug Report | Low | Appearance preference | Closed | |
|
Task Description
RC1 is lazy in saving appearance to config. I noticed, because it always started with default window size. Maximizing was not carried over, also the panels were consistently reset.
Only when eg. dragging the handle to change cad-toolbar width not from preferences it would write an “appearance” section to the config file.
The appearance section should be written rather sooner than later.
|
|
367 | QCAD (main) | Feature Request | Low | Snap "Reference" also for an arc ... | Closed | |
1 |
Task Description
The Snap “Reference” is perfect working on circles.
I would be nice to have this function also on Arc’s. There are many necessities to attach a Horizontal or Vertical line on an arc or an “ex circle” (circle after a cut,)rounds etc. in a professional drawing.
|
|
366 | QCAD (main) | Feature Request | Low | Draw circles tangent to other entities | Closed | |
2 |
Task Description
Hi Andrew
It would be useful to have an option in the Circle tools to be able to draw a circle tangent to other entities such as lines/circles etc.
Regards
Clive
|
|
365 | QCAD (main) | Bug Report | Low | Auto fit to paper fails with some drawings in inches | Closed | |
|
Task Description
Auto fit to paper fails with some drawings in inches
e.g. Bathroom mod 2.dxf
|
|
364 | QCAD (main) | Bug Report | Low | Default paper with default unit inch | Closed | |
|
Task Description
Default paper might be configured as 210×297 inches if inch is chosen as default unit.
|
|
363 | QCAD (main) | Bug Report | Low | Modify tool "Stretch" only one time ... | Closed | |
|
Task Description
3.0 RC1
The Stretch Tool works only for one task and than you have to reselect it again for the next task. Who really works with the stretch tool has to use it (often) a couple times consecutively to get the job done.
It was nice working in 2.2.2.0
|
|
362 | QCAD (main) | Bug Report | Low | Regression in SvgExporterPG.prototype.exportEntity | Closed | |
|
Task Description
In RC1 text in PG SVG will be in the wrong location. The position passed from native code to the SvgExporterPG.prototype.exportEntity is wrong:
Instead of the actual place of the text it gets the position of the surrounding block entity, or, for text that is not in a block, “0,0,0”.
Dimension labels are not affected by this. Also HAlign and VAlign are not passed correctly for text in the model-view block.
|
|
361 | QCAD (main) | Bug Report | Low | New from template: save saves template | Closed | |
|
Task Description
- New from template - Choose template - File - Save
→ Template is overwritten instead of the “Save As” dialog being shown.
|
|
360 | QCAD (main) | Performance Issue | Low | Application Preferences - Shortcuts (slow) | Closed | |
|
Task Description
In the “Application Preferences”-menu a click on submenu “Shortcuts and Commands” freeze the application for a view minutes.
|
|
359 | QCAD (main) | Feature Request | Low | Bigger lineweights | Closed | |
|
Task Description
Currently lineweights seem to be available up to 2.11mm,how about extending the range for some bigger lineweights!
Regards
Clive
|
|
358 | ECMAScript | Feature Request | Low | lfVVCSSMBo | Closed | |
|
Task Description
Good point. I hadn’t thgouht about it quite that way. :)
|
|
357 | ECMAScript | Bug Report | Low | include should raise exception if file not found | Closed | |
|
Task Description
include() should raise exception if file not found.
This is actually the case but does not seem to work properly.
|
|
356 | QCAD (main) | Bug Report | High | Javascript exception: any time user double clicks on te ... | Closed | |
|
Task Description
Javascript exception
Any time user double clicks on text, an exception is raised in the following script:
/qcad-3.0.0-rc1-prof-linux/scripts/Draw/Text/TextDialog/TextDialog.js
Fix is to comment out the line
//bug.... simpleText.checked = textDataIn.isSimple();
|
|
354 | QCAD (main) | Bug Report | Low | Property Editor / Select Layer Malfunction | Closed | |
|
Task Description
RC1b To change the postfix for dimension. Situation: New drawing, Dimension in Drawing, Dimension on one Layer. Menu > Select > Select Layer and click on a dimension. Went to Property Editor > Geometry > Label and change the Label in <>”. Nothing happens.
The same procedure with a other kind of selection works and it works also in the 2.2.2.0
|
|
353 | QCAD (main) | Bug Report | Low | Relative Angle / Line Orthogonal caused malfunction in ... | Closed | |
|
Task Description
After using Line “Relative Angle” or “Line Orthogonal” the Toolbar is in a loop without showing all the Cad tools such as “Modify” “Hatch” etc.. Escape switch only between the “Lines Menu” and the “Select Menu”. To get all Cad Tools back you have to restart QCad.
|
|
352 | QCAD (main) | Bug Report | Low | Info Tool, Polygonal Area shows decimal units instead o ... | Closed | |
|
Task Description
Drawing preferences / dimension = Fraction
Info Tool, Polygonal Area shows decimal units instead of fractions.
|
|
351 | QCAD (main) | Bug Report | Low | Simple text: position, simple text flag | Closed | |
|
Task Description
Simple text tool does not create simple text but mtext. When changed to simple in property editor, position does not work
|
|
348 | QCAD (main) | Feature Request | Low | Dimensions: Inch / Architectural: supporess 0 feet | Closed | |
|
Task Description
Dimensions: Inch / Architectural: supporess 0 feet
|
|
347 | QCAD (main) | Task | Low | Investigate QPainter warnings when running QCAD in -no- ... | Closed | |
|
Task Description
Invastiagte QPainter warnings when running QCAD in -no-gui mode
See forum: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1653&start=45
|
|
346 | QCAD (main) | Feature Request | Low | Set up fixed grid | Closed | |
|
Task Description
Set up fixed grid without any auto scaling or adjusting or meta grid at all.
|
|
345 | QCAD (main) | Bug Report | Low | unit foot: no dotted line | Closed | |
|
Task Description
can’t make a dotted line on a drawing with unit foot.
drawing unit: foot (length taken from a actual architecture plan)
layer settings: as shown in the screen shot
selected line is on layer “dotted”
line types is shown as continues for almost everything
|
|
344 | QCAD (main) | Feature Request | Medium | show warning if someone draws on locked layer | Closed | |
|
Task Description
|
|
343 | QCAD (main) | Bug Report | Medium | 2 drawings in print preview: inconsistencies | Closed | |
|
Task Description
load 2 drawings
switch both into print preview
see attachment
scale combo box shows only “1:1”
switching drawings does not update options tool bar from drawing but drawing from options tool bar
|
|
342 | QCAD (main) | Bug Report | Medium | SIGPIPE QPrinter::init() | Closed | |
|
Task Description
Thread [1] 18993 (Suspended : Signal : SIGPIPE:Broken pipe)
__kernel_vsyscall() at 0xffffe424
send() at 0xb517d5b8
0xacd3d8b2
httpFlushWrite() at 0xacd3dc21
0xacd3fcb8
cupsSendRequest() at 0xacd56470
cupsDoIORequest() at 0xacd56bc7
cupsDoRequest() at 0xacd56f0b
0xacd35d7f
cupsGetDests2() at 0xacd375d5
cupsGetDests() at 0xacd379a3
0xb5ad5153
0xb5a12133
0xb5a28344
0xb5a2b78c
QPrinter::init() at 0xb5a2d4ee
QPrinter::QPrinter() at 0xb5a2f01f
QtScriptShell_QPrinter::QtScriptShell_QPrinter() at 0xb02c9e29
qtscript_QPrinter_static_call() at 0xafe863ba
0xb6bd7f88
0xb6ac7c97
0xb6a91114
0xa95f7580
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,051 0x87d5f9d
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xa970b87d
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,051 0x87d5f9d
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xa9717387
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:786 0x87d4014
RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:782 0x87d3ef8
RScriptHandlerEcma::createActionDocumentLevel() at RScriptHandlerEcma.cpp:873 0x87d4677
RGuiAction::slotTrigger() at RGuiAction.cpp:628 0x8f7a23c
RGuiAction::qt_metacall() at moc_RGuiAction.cpp:86 0x8fc60a9
QMetaObject::metacall() at 0xb5478c83
QMetaObject::activate() at 0xb5489134
QAction::triggered() at 0xb5869d99
QAction::activate() at 0xb586b48f
QToolButton::nextCheckState() at 0xb5da52b2
0xb5cbb61f
QAbstractButton::mouseReleaseEvent() at 0xb5cbb8dc
QToolButton::mouseReleaseEvent() at 0xb5da53ac
QWidget::event() at 0xb58da629
QAbstractButton::event() at 0xb5cba7bf
QToolButton::event() at 0xb5da82ae
QApplicationPrivate::notify_helper() at 0xb5871d7c
QApplication::notify() at 0xb58772c4
QCoreApplication::notifyInternal() at 0xb547215b
QApplicationPrivate::sendMouseEvent() at 0xb5875152
0xb59066b5
QApplication::x11ProcessEvent() at 0xb5905d26
0xb5932f04
g_main_context_dispatch() at 0xb4aee509
0xb4aeed10
g_main_context_iteration() at 0xb4aeefce
QEventDispatcherGlib::processEvents() at 0xb54a2741
0xb5932a55
QEventLoop::processEvents() at 0xb547131d
QEventLoop::exec() at 0xb54715aa
QCoreApplication::exec() at 0xb5473701
qtscript_QCoreApplication_static_call() at 0xb08dc4b7
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xb100cf6b
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:786 0x87d4014
RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:782 0x87d3ef8
RScriptHandler::init() at RScriptHandler.cpp:31 0x8fa7476
main() at main.cpp:228 0x87cd9c9
|
|
341 | QCAD (main) | Bug Report | Medium | PrintPreview: Auto Fit Pages doesn't work as excepted | Closed | |
|
Task Description
load attached drawing
print preview
auto fit pages
shows 2 columns (wrong) and 13 rows (correct), see attachment
|
|
340 | QCAD (main) | Bug Report | Medium | Bitmap export shows selected entities | Closed | |
|
Task Description
|
|
339 | QCAD (main) | Bug Report | Medium | PrintPreview: multi page widget doesn't work anymore | Closed | |
|
Task Description
|
|
338 | QCAD (main) | Bug Report | Medium | PDF export generates an empty document | Closed | |
|
Task Description
→ generates an empty document (or maybe both the lines and the background is white)
Note: After the export ones stays in print preview mode, which is a bit confusing if the command was invoked from the “normal” drawing mode.
|
|
337 | QCAD (main) | Bug Report | Medium | Polylines with arcs export to SVG as lines | Closed | |
|
Task Description
If I create a closed polygon that include arcs or parts of circles, they export to SVG as straight lines.
If I explode the polyline, they export fine.
If I create a solid fill, those arcs export fine.
See attached DXF and SVG output.
This may be a duplicate bug, but my previous bug report vanished.
|
|
336 | QCAD (main) | Bug Report | Low | Tool bars with tools without icon | Closed | |
|
Task Description
Some tool bars (e.g. ‘Block’ tool bar) contain tools without an icon (empty button). Not all tools are available in tool bars.
|
|
335 | QCAD (main) | Feature Request | Low | Drawing preferences: Change font of dimensions | Closed | |
7 |
Task Description
Configure font used for dimensions.
|
|
334 | QCAD (main) | Bug Report | Medium | SVG Export Polygons, arcs converted to straight lines. | Closed | |
|
Task Description
When exporting a drawing to SVG, polygons containing arcs (trimmed circles in this case) are converted to straight lines. If the polygon is exploded first, then it exports correctly. Of course, this isn’t useful if closed polygons are required for the program using the SVG file. Solid hatch fills export correctly. See attached DXF and corresponding SVG export.
|
|
333 | QCAD (main) | Bug Report | Low | Add layer: new layer should be active one | Closed | |
|
Task Description
Add layer: new layer should be active one
|
|
332 | QCAD (main) | Feature Request | Low | Modify - divide should remain active after one use | Closed | |
|
Task Description
1. When selecting the Scissors function, it deactivates after the cut is done. One can therefore not continuously select lines and cut it at the selected point. Each time the function has to be activated from the start.
|
|
331 | QCAD (main) | Bug Report | Low | Snap buttons doubled | Closed | |
|
Task Description
1. For some reason on the Window machine, the snap toolbar buttons are doubled for all functions. I therefore have two buttons for each type of snap and cannot access the bottom snaps unless I undoc the toolbar.
For some reason, this is still fine in the Linux Beta 3. Single buttons like always.
Reported by: koosjr
|
|
330 | QCAD (main) | Bug Report | Low | Text Edit command replaces \U+00B0 with %%[dD] | Closed | |
|
Task Description
when editing text which contains the degree symbol the proper escape sequence is \U+00B0 Qcad 3Beta3 replaces \U+00B0 with %%[dD]
|
|
329 | QCAD (main) | Feature Request | Low | PDF Export: from file menu | Closed | |
|
Task Description
PDF Export: from file menu
|
|
328 | QCAD (main) | Bug Report | Low | Persistent selections | Closed | |
|
Task Description
Preference for persistent selections
|
|
327 | QCAD (main) | Feature Request | Low | Text tool: options tool bar | Closed | |
|
Task Description
Text tool: options tool bar with text, angle, text height.
|
|
326 | QCAD (main) | Feature Request | Low | Print preview: auto center / scale | Closed | |
|
Task Description
Print preview: auto center / scale
|
|
325 | QCAD (main) | Bug Report | Low | Layer renaming: changing name from lower case to upper ... | Closed | |
|
Task Description
Layer renaming: changing name from lower case to upper case
|
|
324 | ECMAScript | Feature Request | Low | SVG export depends on GUI | Closed | |
|
Task Description
SvgExporter.js uses PrintPreview to parse the scale string, and therefore depends on the qt GUI part. That should not make maintenance harder to call RMath directly there? Results seem to match from a first look.
--- SvgExporter.js~ 2011-10-20 14:11:45.527589416 +0200
+++ SvgExporter.js 2011-10-20 14:12:46.277502814 +0200
@@ -1,6 +1,5 @@
include("scripts/library.js");
include("scripts/date.js");
-include("scripts/File/PrintPreview/Print.js");
/**
* File exporter implementation for the SVG format.
@@ -116,7 +115,7 @@
this.svgUnitAbbr = ret[1];
// scale
- this.scale = Print.parseScale(this.scaleStr);
+ this.scale = RMath.parseScale(this.scaleStr);
var bb = this.doc.getBoundingBox();
var size = bb.getSize();
|