|
781 | QCAD (main) | Bug Report | Low | Font is reset to Arial when editing text. | Closed | |
|
Task Description
I added a text with Font “Alex Brush” and size 5. When I double-click on the text to edit it again, the font is reset to Arial and the size to 1.0.
Additional details to reproduce:
Main font of text is set to “Arial”
Individual font of selection is set to “Alex Brush”
The text dialog initially selects all text in the text input field which might trigger the font reset
|
|
780 | QCAD (main) | Feature Request | Low | Hatch should always follow changes to its contour | Closed | |
1 |
Task Description
I drew a closed polyline, hatched it (on the same layer) and then moved a node... the hatch didn’t change as one would expect.
It would be great if hatches would follow any changes to its contour.
|
|
778 | QCAD (main) | Feature Request | Low | Remove multiple layers | Closed | |
4 |
Task Description
It would be a nice feature to be able to select multiple layers to remove them all at once.
|
|
777 | QCAD (main) | Bug Report | Low | Spline display error | Closed | |
|
Task Description
Splines produced by Illustrator are not correctly imported or displayed.
See: http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2344
|
|
773 | QCAD (main) | Feature Request | Low | Line - Relative Angle / Orthogonal: Reference Point opt ... | Closed | |
|
Task Description
Reference Point options (Start, middle, end) also for “Relative angle” and “Orthogonal” .... like the other lines
|
|
771 | QCAD (main) | Bug Report | Low | Isometric grid: spacing not updated | Closed | |
|
Task Description
The spacing of the isometric grid is not updated correctly, if the grid spacing is not set to ‘auto’ but fixed values and the isometric grid is switched on using the menu or tool bars: - Set grid to orthogonal grid, spacing fixed: 1/1 - Set meta grid to orthogonal grid, spacing fixed: 10/10 - Switch to isometric grid using menu or tool bar buttons
|
|
769 | QCAD (main) | Feature Request | Low | Show nodes of polyline when selected | Closed | |
1 |
Task Description
I have a straight polyline with several segments and want to remove some nodes. So I choose “Delete Node(s)”. Then I am asked to select the polyline. When done I can start clicking on the nodes I want to remove - IF ONLY I could see them.
Request: Would be nice if you could make the nodes of the selected polyline visible. Or don’t ask again for selecting a polyline if it was already selected before the tool was chosen.
Currently the workaround is to first select the polyline (which shows the nodes), then choose the tool, then AGAIN select the polyline and then start clicking on the nodes.
|
|
768 | QCAD (main) | Bug Report | Low | Polyline > Delete segments between two nodes not workin ... | Closed | |
|
Task Description
Windows 7 - 64 3.0.8 Polyline > Delete segments between two nodes not working.
|
|
765 | QCAD (main) | Bug Report | Low | Imprecise drawing of circle | Closed | |
|
Task Description
I use version 3.0.8
By accident I stumbled across a minor bug.
I wanted to connect two arcs seamlessly with a third arc. (Image 1)
So I drew two straight lines at right angles at the end of each arc, and at the crossing I put the center point of a circle. (Image 2)
Out of curiosity I zoomed in to the end of the second arc and discovered that the circle did not go through the end point of the arc, even tough I snapped it to the end point. (Image 3)
I could trim the circle to the wanted arc and the arc is displayed without any displacement.
So it seems that only the display of the circle is faulty, not the internal representation of it.
|
|
762 | QCAD (main) | Feature Request | Low | Add option to place text to follow along a given curve, ... | Closed | |
1 |
Task Description
Add option to place text to follow along a given curve,arc etc...
See related topic: http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2330
|
|
761 | QCAD (main) | Feature Request | Low | Colour Indicators for Layer List | Closed | |
2 |
Task Description
Layers are great for organizing a project. For construction lines alone I sometimes use 3 and more layers. And then there are more layers for each part I design. Each with its own colour.
And when a project gets bigger I start wishing for a quick overview in the layer list to the colours I use on them. So I wish for colour indicators on the layer list to quickly identify the membership of a line to a layer.
I have a small image attached to make you see, what I mean.
|
|
760 | QCAD (main) | Feature Request | Low | Hierarchical Layers | Closed | |
3 |
Task Description
Please, dear Feature Fairy, I wish for hierarchical layers. That would make organizing my projects a little bit easier.
Let me show you, what I mean: (see Attachment)
|
|
759 | QCAD (main) | Bug Report | Low | Button "Flip Block" doesn't remains Highlighted ... | Closed | |
|
Task Description
Insert Block:
If I use the “Flip Block” option (Horizontal and/or Vertical) the Buttons doesn’t remains Highlighted. It should remain Highlighted ...
|
|
755 | QCAD (main) | Bug Report | Low | Text: Redundant Infos if I customize the Text hight .. ... | Closed | |
|
Task Description
If I customize the Text height I get redundant Infos for the Contents...
|
|
753 | QCAD (main) | Bug Report | Low | Paste Preview confusing .... | Closed | |
|
Task Description
If I paste something from the clipboard to a drawing the scales of dims are wrong in the preview.
It is difficult to place it right with a confusing preview of that what I have to place ...
|
|
751 | QCAD (main) | Bug Report | Low | Dimension Leader: Arrow attribute | Closed | |
|
Task Description
XP/32 QCAD 3.0.0
If I try to change the Attributes of a dim leader it doesn’t works.
Leader → Option Arrow head - marked or not - no impact - always with arrow,
Property editor: Geometry of leader, Arrow: yes or no - doesn’t changed anything, Vertex: Index Number doesn’t change anything,
|
|
750 | QCAD (main) | Bug Report | Low | Modify - Divide: entities moved to current layer | Closed | |
|
Task Description
Modify divide moves split entities to new layer if circle or full ellipse is divided.
|
|
749 | QCAD (main) | Bug Report | Low | QCAD 3.0.6 / 3.0.7 autosave crashes | Closed | |
|
Task Description
XP32/ QCAD 3.0.6
The 3.0.6 Version (Snapshot) is very instable - crashed always after a couple minutes ...
Problem signatur: AppName: qcad.exe AppVer: 0.0.0.0 ModName: qtcore4.dll ModVer: 4.7.4.0 Offset: 0005d1e8
|
|
748 | QCAD (main) | Feature Request | Low | Blocks ... | Closed | |
|
Task Description
It would be nice ...
- to be able to use " and / in Block names what is really helpful in the Inch and Fraction world ...
- the ability to overwrite an existing Block what is often much easier/faster than editing a Block
- After selecting a Block you get the info of the Block name in the Property Editor (Geometry / Referenced Block). If I need to edit this Block I have to go to the Block List - have to search for this name because it is not marked .... and of course it is a long long list. It would be nice to have a “Edit this Block” Button in the Property Editor / Geometry / Referenced Block dialog ...
|
|
746 | QCAD (main) | Feature Request | Low | Additional projection tools: dimetric, parallel, persp ... | Closed | |
|
Task Description
We have already a powerful projection tool in QCAD - the Isometric tool.
It would be nice to have additional a “Dimetric tool” (Ratio 1:0.5:1, Angle 7°/42°) what is often used in the “Engineering world”. It looks just more professional than the simple Isometric Projections and I’m pretty sure that could open a couple more Customer doors
|
|
745 | QCAD (main) | Bug Report | Low | -always-load-scripts not working | Closed | |
|
Task Description
Command line switch -always-load-scripts has no effect.
|
|
744 | QCAD (main) | Bug Report | Low | QCAD 3.0.5 instable ... | Closed | |
|
Task Description
XP32/ QCAD 3.0.5
The 3.0.5 Version is very instable - crashes many times in an hour
Problem signatur: AppName: qcad.exe AppVer: 0.0.0.0 ModName: qcad.exe ModVer: 0.0.0.0 Offset: 00de468d
|
|
743 | QCAD (main) | Feature Request | Low | After editing a Block back to the last window opening i ... | Closed | |
|
Task Description
Case: Working on a Main Drawing, decide to edit a Block, start the editing process, close the editing process with “Return to Main drawing” and come back to the Main Drawing - but unfortunately to an absolute different View in the Main Drawing ...
It would be nice to come back to the same View (Zoom window) like before I started the editing procedure.
|
|
742 | QCAD (main) | Bug Report | Low | Autosave weird behavior ... | Closed | |
|
Task Description
QCAD 3.0.5
Case: Start QCAD → Went to the Menu → File → Open recent → choose a Drawing out of the List → click to open this existing drawing. Message windows appears: QCAD found an Autosave drawing .... will you open it? I choose NO!!! I go back to the Menu → File → Open recent → will choose the same Drawing .... but it is not anymore listed!!! Ok - I’m not lazy ... ... back to the Menu → File → Open → find the original file on my Hard drive → click to open it and get the Warning Message: “Can not open the File ...... Please check your access rights bla bla bla....”
Question: In this case I’m only able to open the bak file and “Save as” under the old name to get my starting situation back ...? Just because I said “NO” to load the Backup File in first place ... ?
|
|
740 | QCAD (main) | Bug Report | Low | Draw - Arc - Two Points and Radius: wrong console outpu ... | Closed | |
|
Task Description
XP/32 QCAD 3.0.5
... after picking the first Point a wrong message appears what says: “Warning: The two points are identical”
|
|
739 | QCAD (main) | Bug Report | Medium | QCAD fails to open a DXF file generated by itself | Closed | |
|
Task Description
QCAD does not manage to load an DXF file created by itself (presumably, I don’t remember excactly, could be the last 2.x version). When selecting File ⇒ Open on the file in attachment, QCAD shows a pop-up reporting the following error :
Cannot open file »‘/home/gillonr/Documents/Projects/Familly/Br.../Chambre Parents/Plans/Plan-PaterNoster.dxf’. » Please check your access rights, the file format and file extension.
The file permissions are OK, there is no issue of disk space on the volume where the file reside or where the QCAD distribution is installed or at any other critical location. The problem does not happen on other files created with QCAD, so it appears to be data dependent.
The file causing trouble in QCAD can be imported in LibreOffice 3.4.2 w/o reporting errors (but that application does not provide the suitable methods / tools to edit this format...).
(1) Is there a way to activate debugging when reading in data from a DXF ? (2) Is there some tool (ev. 3rd party) allowing to check that the data is clean ? (3) Can someone identify the cause of the problem (presumably some data construct or maybe corruption) ? (4) In case it would turn out that the problem is a QCAD bug, is there a work-around (I need these drawings...).
|
|
738 | QCAD (main) | Bug Report | Low | Lost Layer and Block List caused by closing the empty " ... | Closed | |
|
Task Description
XP32 / 3.0.5
Example case: I open QCAD and I have automatically the “Untitled 1” drawing. If I open now an additional, saved drawing I have all Blocks and Layer listed and I’m able to work normal with my drawing ... If the “Untitled 1” drawing is NOT the active drawing and I close it with the X in the Tab I will lose the Layer and Block List (only the List!) in the other drawing ....
I have to play around with QCAD “Window minimizing” “Draft mode” or I have to reopen the drawing to get the Layer/Block List back! Seems to be a refresh problem .....
Funny is that this not occurs if I have opened a couple drawings .... but in this case I’m able to switch (and refresh?) the drawings with the tabs ....
|
|
737 | QCAD (main) | Bug Report | Low | Block with Circle - can't snap to ... | Closed | |
|
Task Description
XP32 / QCAD 3.0.5
Block with Circles - can’t snap to “Reference”, Intersection.
|
|
732 | QCAD (main) | Bug Report | Low | Text Control Info is displayed in Drawing when imported ... | Closed | |
1 |
Task Description
May relate to 646.
Control Text is Displayed on Drawing created in ACAD. The Text is representing /p as a new line when I think it should be ignored. See QCAD PDF I am unsure what this represents in ACAD. /pxqc;
V3.0.0 Windows 7 64-bit
|
|
731 | QCAD (main) | Bug Report | Low | Break out segment: fails in some cases | Closed | |
1 |
Task Description
See fs731.dxf
|
|
730 | QCAD (main) | Bug Report | Low | Svg PG export splines broken | Closed | |
|
Task Description
With the 3.0.3 point release (latest available for Linux systems), SVG PG exporter fails to export splines:
Uncaught exception at /opt/qcad-3.0.3-prof-linux-x86/scripts/ImportExport/SvgExporter/SvgExporterPG.js:72: TypeError: Result of expression ‘splineSeg.getDegree’ [undefined] is not a function. 72 var degree = splineSeg.getDegree();
The objects returned from getBezierSegments() do not provide the methods of RSpline.
|
|
727 | QCAD (main) | Bug Report | Medium | 100% CPU Usage with 3.0 Final Version. | Closed | |
|
Task Description
I am continuing my testing on version 3.0 Final.
I noticed that, with 3.0 Final open, the service “syslogd” (on OSX Leopard PPC) does get CPU consumption up to 100%, making the machine unusable.
This has never happened with the RC2 version.
It’s possible to have a copy of RC2 while they investigated the problem? Unfortunately I have not kept a copy.
|
|
726 | QCAD (main) | Bug Report | Low | Unable to save the windows layout. | Closed | |
|
Task Description
I decided to go from version 3.0 RC2 to version 3.0 Final.
I opened the program and I tried to customize the layout of the various toolbars and panels “Layer”, “Blocks”, etc..
On the next reboot all settings are lost and QCAD presents itself as image attached.
How can I fix?
|
|
725 | QCAD (main) | Bug Report | Medium | Inserting items from part library may create invalid bl ... | Closed | |
|
Task Description
To reproduce: - Create a part library item with file name “Test1 .dxf” (note the space at the end of the base name) - Insert this part library item into a blank drawing - Try to save the drawing - Error “Invalid Symbol Table Name” occurs
|
|
723 | QCAD (main) | Bug Report | Low | Hatch "Solid Fill" no saved. | Closed | |
|
Task Description
In the attached drawing (top figure) I created an hatch “Solid Fill”. I have saved, reopen and the “Solid Fill” is not present!
No problem (bottom figure) with other types of hatch.
It’s possible to have a workaround? Is urgent for terminate work.
Thank You.
|
|
722 | QCAD (main) | Bug Report | Low | Mouse wheel zoom .... | Closed | |
|
Task Description
XP 32
Vers. 3.0.0 Mouse zoom in and out with the Mouse-wheel = nice and smooth ;)
Vers. 3.0.5 Mouse zoom in and out with the Mouse-wheel = jumping zigzag ways during it zooms .... :(
|
|
718 | QCAD (main) | Bug Report | Low | 3.0.5 -snap / info feedback problems | Closed | |
|
Task Description
In 3.0.5 using windows 7-64 and windows vista. After selecting to use any drafting tool - either arc, circle or ellipse, polyline etc. there are problems with defining the second snap point onwards whether using auto snap or any of the snap tools,the info feedback i.e. End or Middle etc... is flickering or none at all.
Test: 1.Center, Point. 2.Define center. 3.Hard to define point, flickering occurs on graphics feedback for label.
I`m guessing this is another Graphic display problem here.
|
|
717 | QCAD (main) | Bug Report | Low | Create Library Item from selection doesn't takes the ch ... | Closed | |
|
Task Description
Tool “Create Library Item from selection” doesn’t takes the chosen Reference point ....
It seems that QCAD takes something around the absolute Reference by 2 times ..... ???
|
|
716 | QCAD (main) | Bug Report | Low | Graphics view not updated | Closed | |
|
Task Description
Steps to reproduce: - Start QCAD - Switch to another application by clicking on its title bar - Switch back to QCAD by clicking on its title bar - Without any further clicks, start panning using the middle mouse button (panning is performed but graphics view does not update)
Alternative: - Start QCAD - Draw a line - Start line parallel tool - Switch to another application by clicking on its title bar - Switch back to QCAD by clicking on its title bar - Without any further clicks, try placing the parallel (no preview is shown, a click will place the parallel, graphics view is often updated much later)
|
|
715 | QCAD (main) | Bug Report | Low | Tangent Warning Messages are wrong ... | Closed | |
|
Task Description
Task: I like to draw a line tangent between two circle.
I choose the line/tangent tool - click the first circle - get a Warning Message: “No tangent possible” confirm the Message with the OK Button. Choose the second circle - get again a Warning Message: “No tangent possible” confirm also this Message with the OK Button.
Result: A line tangent between two circle ......
|
|
713 | QCAD (main) | Bug Report | Low | Box select selects invisible blocks | Closed | |
|
Task Description
Make sure that block references of hidden blocks cannot be selected.
|
|
712 | QCAD (main) | Feature Request | Low | 3.0.3 - difficult to distinguish between Break out and ... | Closed | |
|
Task Description
Its slightly difficult to distinguish between the Break out and Auto-trim buttons in 3.0.3 (snapshot) release, even with large buttons!
Maybe a different color - (Green for example?)for the horizontal line between the red dots in the new Auto-trim button.
|
|
711 | QCAD (main) | Bug Report | Low | Drawing preferences dialog too large | Closed | |
|
Task Description
See forum at: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=2249&view=unread#unread
|
|
710 | QCAD (main) | Bug Report | Low | snapshot 3.0.3 - input fields showing ' Expression is e ... | Closed | |
|
Task Description
Windows 7 -64 snapshot 3.0.3 - tool input fields showing ' Expression is empty ' , even after inputting values.
|
|
709 | QCAD (main) | Bug Report | Low | Move/copy MV - GUI -button (on docked tool bar) not wor ... | Closed | |
|
Task Description
Windows 7 - 64 To reproduce: 1.Select entity. 2.Using a ‘docked’ Modify tool bar, click on the Move/Copy button. 3.Unable to move cross hairs to snap properly to a reference point.
* No problems with this from either - the Menu > Modify > Move/Copy or the Main CAD tools > Modification tools or from using keycode MV! Only from a ‘docked’ modify tool bar.
|
|
706 | QCAD (main) | Bug Report | Medium | Part Library not displaying parts | Closed | |
|
Task Description
When I open the part library, it displays a dialog saying “Updating Index”, after it finishes, none are displayed, and the filesystem bar at the top is empty, clicking on it does nothing.
|
|
702 | QCAD (main) | Feature Request | Low | Allow moving (undocking) of CAD tool bar | Closed | |
|
Task Description
Allow moving (undocking) of CAD tool bar (similar like command line can be undocked).
|
|
701 | QCAD (main) | Bug Report | Low | LINETYPE SCALE | Closed | |
|
Task Description
The scale of the linetypes in model space not view same as in the print preview.
|
|
698 | QCAD (main) | Bug Report | Low | Lele dossier Système de fichier de l'explorateur de la ... | Closed | |
|
Task Description
Je suis allé dans Edition/Préférences générales/Widgets/Explorateur de la bibliothèque et j’ai ajouté différents répertoires contenant soit mes bibibliothèques soit celle fournies lors de l’installation du logiciel. L’explorateur de la bibliothèque reste vide.
|
|
697 | QCAD (main) | Feature Request | Low | Option to configure the min/max number of segments in a ... | Closed | |
|
Task Description
Option to add a setting to configure the number (min/max) of segments for splines.
See topic: http://www.qcad.org/rsforum/viewtopic.php?f=31&p=7007#p7007
|