QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatus  descProgress
 2025 QCAD/CAMBug ReportLow Set Nesting Quantity shows wrong quantity Closed
100%
Task Description

If I set “Set Nesting Quantity” to e.g. 5 it will remember this number within the session.
If I need to check which number I’ve used last time there is no way to find the actual used value - it will show me always 1.
If I restart QCAD/CAM the value is completely lost and the nesting tool tries to fit in as much as possible into the sheet - regardless that the quantity number still shows one.

It would be nice to have a remember function even after restarting QCAD/CAM and have some kind of possibility to see the last used value.

 2026 QCAD (main)Bug ReportLow Modify > Clip to Rectangle: fails on blocks Closed
100%
Task Description

Clip to Area = deletes whole blocks
Clear Area = deletes whole blocks
Cut at Area Boundary = deletes whole blocks

It was working before e.g. in QCAD Version 3.18.0 ;-)

 2027 QCAD (main)Bug ReportLow File > Print: Minimum line weight for printing is 0.01  ...Closed
100%
Task Description

Create drawing in Meters.
Create line with line weight 0.25mm.
Line prints as 1cm wide as minimum line weight is forced as 0.01 drawing units (i.e. 0.01m) for printing.

 2028 QCAD/CAMBug ReportLow CAM > CAM Export: Fails for new document created Closed
100%
Task Description

1. Load drawing
2. Create new drawing
3. Add toolpath / tool
4. CAM > CAM Export

Fails to identify current config (post processor).

 2030 QCAD (main)Bug ReportLow Cannot snap to points of mirrored blocks Closed
100%
1 Task Description

Wenn ich selbst erstellte Blocks Spiegle, funtionieren gewisse Fangpunkte nicht mehr.

In der angehängten Datei, ist der gespiegelte Block und deren inaktive Fangpunkte mit Roten Kreisen markiert.

Ich arbeite mit macOS Catalina 10.15.2

Vielen Dank für das Beheben dieses Bugs, der mich gerade sehr viel Zeit kostet ;-(

 2032 QCAD (main)Bug ReportLow Draw > Circle > Three Tangents: Cannot select third tan ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6915

 2035 QCAD (main)Bug ReportLow Linetype scale in viewports Closed
100%
Task Description

The preference

Edit > Drawing Preferences > General > Linetype > Scale of linetypes matches the scale of each viewport

should take the individual line type scale of entities into account.

 2036 QCAD (main)Bug ReportLow Arc rendering in block context Closed
100%
Task Description

Arcs in nested scaled and rotated blocks are not always rendered properly (too rough, too fine).

 4 BookBug ReportMedium Book "CAD Instruction" layout issues Closed
100%
1 Task Description

Post all kind of layout issues for the book “CAD Instruction” here, e.g. overlapping text.

 5 QCAD (main)Bug ReportMedium print preview: paper disappears on focus out / in Closed
100%
Task Description

when changing the window focus, the paper in the print preview disappears and doesn’t come back anymore

 6 QCAD (main)Performance IssueMedium Auto snap near splines Closed
100%
Task Description

Move cursor near spline, e.g. when drawing line with auto snap active.

 8 QCAD (main)Bug ReportMedium Text Dialog: custom text height broken Closed
100%
Task Description

Custom text height cannot be set (enter closes the dialog, tab does not activate the entered text height)

 14 QCAD (main)Feature RequestMedium File: Print Preview Closed
100%
Task Description

Open

  • re-enable auto fit
  • re-enable center

Postponed

  • option to not print empty pages

Done

  • PDF export
  • scale factor
  • position
  • paper size
  • paper orientation
  • toggle portrait / landscape in toolbar
  • choose paper format in toolbar
  • multiple pages with margin and stitch marks
  • zoom to all pages
  • color mode (color, gray scale, black white)
  • scale combo box in drawing preferences empty
 20 QCAD (main)Bug ReportMedium Changing drawing unit makes QCAD hangs Closed
100%
Task Description

Changing the unit of a drawing can make QCAD hangs

  • Mile: QCAD hangs in endless loop
  • Nanometer, Microinch: view turns white, at some levels of zoom, it turns gray
  • Foot, Yard: GraphicsView grid too small meshed
 25 QCAD (main)Feature RequestMedium Autosave Closed
100%
Task Description

Autosave

Make interval configurable
Enable / disable
Path (?)

 31 QCAD (main)Bug ReportMedium Snap Coordinate / option toolbar: uncaught exception Closed
100%
Task Description
  • draw → line → snap coordinate
  • draw → line → snap polar coordinate
'setButton'"Set"

problem: the option tool bar isn’t show at all

 37 QCAD (main)Feature RequestMedium Generate Example Drawings Closed
100%
Task Description
  • a script would be great actually. then we can generate different drawings with different units / scales / paper settings
  • OdWriteEx from OpenDesign creates something similar: a bunch of rectangles, each with a text label and an entity inside, e.g. “Aligned Dimension” and below a rectangle with an aligned dimension inside
  • the example drawings should contain:
    • an instance of every supported entity type (line, arc, circle, all dimensions, block insert, text, hatch, solid fill, ...)
    • lines in all available widths
    • lines in all available types
    • lines in all available (fixed) colors and some custom colors
  • script should be able to generate example drawings for different:
    • units
    • drawing scales
    • paper sizes
    • paper settings (background color, multi page settings, etc.)
 40 QCAD (main)Bug ReportMedium saving spline CP, 2deg, closed hits assert Closed
100%
Task Description
  1. new file
  2. draw spline CP, 2deg, closed
  3. save → crash
Debug:    "RDwgServices::printErrorStackTrace: General modeling failure" 
Warning:  RDwgExporter::exportEntity: Exception occured. Entity NOT saved: 
 RSplineEntity(REntity(RObject(id: 23, document: "0xb246720", address: "0xb915f00", undone: 0), type: 23, layerId: 21, blockId: 22, lineweight: -1, linetypeId: 0, color: RColor(ByLayer) , drawOrder:  0 , selectionStatus:  false ) 
controlPoints (6): 0: RVector(14, 21, 0) 1: RVector(41, 25, 0) 2: RVector(41, 9, 0) 3: RVector(28, 4, 0) 4: RVector(14, 21, 0) 5: RVector(41, 25, 0) 
fitPoints (0): 
knots (7): 0: -1, 1: 0, 2: 1, 3: 2, 4: 3, 5: 4, 6: 5, )
Fatal:    ASSERT: "false" in file RDwgExporter.cpp, line 1234
Thread [1] 2066 (Suspended : Signal : SIGABRT:Aborted)	
	__kernel_vsyscall() at 0xffffe424	
	raise() at 0xb4f037ff	
	abort() at 0xb4f05140	
	RMainWindow::messageHandler() at RMainWindow.cpp:63 0x8e025a6	
	qt_message_output() at 0xb5357f65	
	0xb53581ab	
	qFatal() at 0xb53582c9	
	qt_assert() at 0xb5358355	
	RDwgExporter::exportEntity() at RDwgExporter.cpp:1,234 0x8cb754f	
	RExporter::exportEntities() at RExporter.cpp:408 0x8de5c96	
	<...more frames...>	
 41 QCAD (main)Bug ReportMedium dimensions: tolerance shown twice after block insert Closed
100%
Task Description
  • File “ExampleDrawings/data/dim_aligned.dwg”:
    • upper limit: 0.01, lower limit 0.02 → correctly shown
  • choose “Generate Example Drawings” → the element “aligned dimension” (with limits set) shows 0.010.01 now, since both label and tolerance limits are set (according to the property editor):
    • label: <>\S0.01^0.02;
    • upper limit: 0.01
  • same for lower limit
  • “Generate Example Drawings” inserts the drawings as blocks
 43 QCAD (main)Bug ReportMedium Hatch ellipse Closed
100%
Task Description

cannot hatch single full ellipse

 45 QCAD (main)Bug ReportMedium Hatch Polyline Closed
100%
Task Description
  1. open the attached drawing
  2. select the polyline
  3. fill it with hatch pattern “stars” → looks ok, the whole area is filled
  4. save the file
  5. re-open it
  6. there is a gap in the filling now, see attached screen shot
 61 DocumentationBug ReportMedium QCAD 3 Manual Closed
100%
Task Description

Change the user manual directory / file names from ‘simpletextviewer’ to
‘qcad_user_manual’ and adjust the sources accordingly that the manual can be shown
in the help menu.

We can simply drop the contents of the manual that is checked in and replace
it with a simple note “No manual is available yet for this technology preview of QCAD 3”

 68 QCAD (main)Bug ReportMedium insert from library browser crashes Closed
100%
Task Description
  1. new file
  2. insert (drag-n-drop or insert button) from library browser → segfault
Thread [1] 12403 (Suspended : Signal : SIGSEGV:Segmentation fault)	
	RObject::getId() at RObject.h:92 0x8a11c82	
	RClipboardOperation::copy() at RClipboardOperation.cpp:66 0x8d4892a	
	RPasteOperation::apply() at RPasteOperation.cpp:30 0x8d4841a	
	RDocumentInterface::previewOperation() at RDocumentInterface.cpp:1,766 0x8de19bb	
	REcmaDocumentInterface::previewOperation() at REcmaDocumentInterface.cpp:4,711 0x889aaad	
	0xb6bd813c	
	0xb6ac1f68	
	0xb6a9164c	
	0xa83ced9f	
	0xb6a423e3	
	<...more frames...>	
 77 QCAD (main)Bug ReportMedium Linux: Printing crashes Closed
100%
Task Description

Printing segfaults under Linux after the printer dialog is shown.

 87 QCAD (main)Bug ReportMedium Advanced Selection hits 'debugger' statement Closed
100%
Task Description

Advanced selection dialog hits a debugger statement on line 1088.

  1. Selection- Advanced Selection
  2. Change first combo box to “Any”
 144 QCAD (main)Bug ReportMedium snap restriction buttons are not toggled Closed
100%
Task Description

the buttons works, but are not toggled (”restriction off” is always pushed)

 156 QCAD (main)Bug ReportMedium Isometric Projection fails for arc Closed
100%
Task Description
'shape.approximateWithLines'"0xc436c88"
 157 QCAD (main)Bug ReportMedium rotate causes uncaught exception Closed
100%
Task Description
  1. draw line
  2. Modify → Rotate
    • center point: line end point
    • delete original
    • angle 90°
Uncaught exception at scripts/Modify/Rotate/Rotate.js:117: Error: :-1:-1: Wrong number/types of arguments
for RDocumentInterface.applyOperation().
<native>(undefined) at -1
<anonymous>(event = RCoordinateEvent(0xbfffd478), preview = false) at scripts/Modify/Rotate/Rotate.js:117
<anonymous>(event = RCoordinateEvent(0xbfffd478)) at
/home/martin/workspace/rsframework/scripts/Modify/../EAction.js:1197
<global>() at -1
117	                di.applyOperation(this.getOperation(false));
 158 QCAD (main)Bug ReportMedium polyline with segment radius mirrored wrong Closed
100%
Task Description
  • see attached drawing
 160 ECMAScriptBug ReportMedium SplitIntoEqualParts.js: Uncaught exception Closed
100%
Task Description
 
Uncaught exception at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:174: Error: :-1:-1: REntity: Argument 0 is not of type REntity *REntity *.
<native>(RLineEntityPointer(0xb73b4c8)) at -1
<anonymous>(op = RAddObjectsOperation(0xb733790), argLine = RLineEntityPointer(0xb73b4c8)) at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:174
<anonymous>(op = RAddObjectsOperation(0xb733790)) at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:111
<anonymous>(true) at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:95
<anonymous>() at /home/martin/workspace/rsframework/scripts/Modify/../EAction.js:1150
<anonymous>() at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:73
<global>() at -1
174	        line.copyAttributesFrom(argLine);

qsdb> argLine
RLineEntityPointer(0xb73b4c8)
 170 QCAD (main)Bug ReportMedium wrong scaling for ellipses / ellipse arcs Closed
100%
Task Description
  • see attachment
  • factor x/y: 0.5
  • green: original entities
  • red: properly scaled entities
 171 QCAD (main)Bug ReportMedium arc split wrong Closed
100%
Task Description
  • see attachment
 172 QCAD (main)Feature RequestMedium send to back / to front Closed
100%
Task Description

implement

 175 QCAD (main)Bug ReportMedium Trim.js: uncaught exception for ellipse / ellipse arcs Closed
100%
Task Description
  1. draw line as limiting entity
  2. draw ellipse and ellipse arc, both intersecting
  3. modify → trim
  4. select the diagonal line as limiting entity
  5. move around with the mouse over ellipse or ellipse arc → crash
Uncaught exception at scripts/Modify/Trim/Trim.js:267: TypeError: Result of expression
'trimmed1.trimStartPoint' [undefined] is not a function.
267	        trimmed1.trimStartPoint(is);
qsdb> .backtrace
#0  <anonymous>(op = RMixedOperation(0xc37b998), limitingEntity = RLineEntityPointer(0xc20c098),
limitingShape = RLine(RShape(address: "0xc217bd8"), startPoint: RVector(40, 36, 0) ,
endPoint:  RVector(-3, -3, 0) ) , limitingPos = RVector(2.81463, 1.47073, 0) ,
trimEntity = REllipseEntityPointer(0xc3775f8), trimPos = RVector(12.4488, 5.03537, 0) ,
trimBoth = false, preview = true) at scripts/Modify/Trim/Trim.js:267
#1  <anonymous>(preview = true) at scripts/Modify/Trim/Trim.js:167
#2  <anonymous>() at /home/martin/workspace/rsframework/scripts/Modify/../EAction.js:1150
#3  <anonymous>(event = REntityPickEvent(0xbfffd3c8), preview = true) at scripts/Modify/Trim/Trim.js:147
#4  <anonymous>(event = REntityPickEvent(0xbfffd3c8)) at /home/martin/workspace/rsframework/scripts/Modify/../EAction.js:1225
#5  <global>() at -1
 178 QCAD (main)Bug ReportMedium add layer from property editor got uncaught exception Closed
100%
Task Description
  1. new drawing
  2. draw line
  3. select it
  4. choose “+” in property editor to add a new layer → the layer dialog pops up
  5. press cancel
  6. move the mouse back into the drawing area
'layer'
 179 QCAD (main)Bug ReportMedium pick view got uncaught exception Closed
100%
Task Description
  1. new drawing
  2. draw something
    • menus view → “remove view”, “edit view”, “pick view” are disabled, which is right
  3. add view → dialog pops up
  4. press cancel
    • menus view → “remove view”, “edit view”, “pick view” are enabled now, which is wrong
 
 181 QCAD (main)Bug ReportMedium command line got uncaught exception Closed
100%
Task Description
  1. start QCAD (no arguments → a new blank drawing is shown)
  2. enter “new” into the command line
  3. close both drawings / tabs
  4. click into command line edit field and press “arrow up”
'di'
 183 QCAD (main)Bug ReportMedium Linux CUPS: QPrinter::init() causes SIGPIPE:Broken pipe Closed
100%
Task Description
  • not reproduceable
  • Linux vostro 2.6.37.6-0.7-desktop #1 SMP PREEMPT 2011-07-21 02:17:24 +0200 i686 i686 i386 GNU/Linux
  • openSUSE 11.4 (i586)
  1. new drawing
  2. add new layer
  3. save as DWG
  4. File → Drawing Preferences → crash
/home/martin/workspace/rsframework/debug/qcad-bin [23943]	
	Thread [8] 23992 (Suspended : Container)	
		__kernel_vsyscall() at 0xffffe424	
		poll() at 0xb4f9703e	
		g_poll() at 0xb4b010bb	
		0xb4af0c46	
		g_main_context_iteration() at 0xb4af0fce	
		QEventDispatcherGlib::processEvents() at 0xb54a2741	
		QEventLoop::processEvents() at 0xb547131d	
		QEventLoop::exec() at 0xb54715aa	
		QThread::exec() at 0xb535e8ed	
		0xb544da4b	
		0xb5361b52	
		start_thread() at 0xb5177b05	
		clone() at 0xb4fa1d5e	
	Thread [7] 23954 (Suspended : Container)	
	Thread [6] 23953 (Suspended : Container)	
	Thread [5] 23952 (Suspended : Container)	
	Thread [3] 23950 (Suspended : Container)	
	Thread [2] 23946 (Suspended : Container)	
	Thread [1] 23943 (Suspended : Signal : SIGPIPE:Broken pipe)	
		__kernel_vsyscall() at 0xffffe424	
		send() at 0xb517f5b8	
		0xacd498b2	
		httpFlushWrite() at 0xacd49c21	
		0xacd4bcb8	
		cupsSendRequest() at 0xacd62470	
		cupsDoIORequest() at 0xacd62bc7	
		cupsDoRequest() at 0xacd62f0b	
		0xacd41d7f	
		cupsGetDests2() at 0xacd435d5	
		cupsGetDests() at 0xacd439a3	
		0xb5ad5153	
		0xb5a12133	
		0xb5a28344	
		0xb5a2b78c	
		QPrinter::init() at 0xb5a2d4ee	
		QPrinter::QPrinter() at 0xb5a2f01f	
		QtScriptShell_QPrinter::QtScriptShell_QPrinter() at 0xb02c9e29	
		qtscript_QPrinter_static_call() at 0xafe863ba	
		0xb6bd7f88	
		0xb6ac7c97	
		0xb6a91114	
		0xa7b3a4fd	
		0xb6a44262	
		0xb6a445f7	
		0xb6bb0f92	
		QScriptEngine::evaluate() at 0xb6bba46f	
		RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,015 0x8799f2d	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xa7b8e0f6	
		0xb6a44262	
		0xb6a445f7	
		0xb6bb0f92	
		QScriptEngine::evaluate() at 0xb6bba46f	
		RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,015 0x8799f2d	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xa7b91f81	
		0xb6a44262	
		0xb6a445f7	
		0xb6bb0f92	
		QScriptEngine::evaluate() at 0xb6bba46f	
		RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,015 0x8799f2d	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xa7b91c9f	
		0xb6a44262	
		0xb6a466c9	
		0xb6a8db4a	
		0xa7b9465c	
		0xb6a423e3	
		0xb6af06e0	
		0xb6ac201e	
		QScriptValue::call() at 0xb6bd2e67	
		REcmaShellActionAdapter::beginEvent() at REcmaShellActionAdapter.cpp:149 0x8c5981a	
		RDocumentInterface::setCurrentAction() at RDocumentInterface.cpp:290 0x8ef0094	
		RScriptHandlerEcma::createActionDocumentLevel() at RScriptHandlerEcma.cpp:858 0x8798950	
		RGuiAction::slotTrigger() at RGuiAction.cpp:607 0x8f0e11f	
		RGuiAction::qt_metacall() at moc_RGuiAction.cpp:86 0x8f58cb1	
		QMetaObject::metacall() at 0xb5478c83	
		QMetaObject::activate() at 0xb5489134	
		QAction::triggered() at 0xb5869d99	
		QAction::activate() at 0xb586b48f	
		0xb5d550c0	
		0xb5d5b485	
		QMenu::mouseReleaseEvent() at 0xb5d5d65d	
		QtScriptShell_QMenu::mouseReleaseEvent() at 0xb0272feb	
		QWidget::event() at 0xb58da629	
		QMenu::event() at 0xb5d5aec4	
		QtScriptShell_QMenu::event() at 0xb027621b	
		QApplicationPrivate::notify_helper() at 0xb5871d7c	
		QApplication::notify() at 0xb58772c4	
		QCoreApplication::notifyInternal() at 0xb547215b	
		QApplicationPrivate::sendMouseEvent() at 0xb5875152	
		0xb59068fc	
		QApplication::x11ProcessEvent() at 0xb5905d26	
		0xb5932f04	
		g_main_context_dispatch() at 0xb4af0509	
		0xb4af0d10	
		g_main_context_iteration() at 0xb4af0fce	
		QEventDispatcherGlib::processEvents() at 0xb54a2741	
		0xb5932a55	
		QEventLoop::processEvents() at 0xb547131d	
		QEventLoop::exec() at 0xb54715aa	
		QCoreApplication::exec() at 0xb5473701	
		qtscript_QCoreApplication_static_call() at 0xb08dc4b7	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xb100d9e9	
		0xb6a44262	
		0xb6a445f7	
		0xb6bb0f92	
		QScriptEngine::evaluate() at 0xb6bba46f	
		RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:743 0x8797fbc	
		RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:739 0x8797ea0	
		RScriptHandler::init() at RScriptHandler.cpp:31 0x8f3a8ca	
		main() at main.cpp:176 0x8792007	

 184 QCAD (main)Bug ReportMedium SIGABRT RExporter::exportEntity() at RExporter.cpp:524 Closed
100%
Task Description
  • while creating a dimension
  • drawing unit: inches
  • not reproduceable
/home/martin/workspace/rsframework/debug/qcad-bin [24765]	
	Thread [10] 24804 (Suspended : Container)	
		__kernel_vsyscall() at 0xffffe424	
		poll() at 0xb4f9703e	
		g_poll() at 0xb4b010bb	
		0xb4af0c46	
		g_main_context_iteration() at 0xb4af0fce	
		QEventDispatcherGlib::processEvents() at 0xb54a2741	
		QEventLoop::processEvents() at 0xb547131d	
		QEventLoop::exec() at 0xb54715aa	
		QThread::exec() at 0xb535e8ed	
		0xb544da4b	
		<...more frames...>	
	Thread [7] 24773 (Suspended : Container)	
	Thread [6] 24772 (Suspended : Container)	
	Thread [5] 24771 (Suspended : Container)	
	Thread [3] 24769 (Suspended : Container)	
	Thread [2] 24768 (Suspended : Container)	
	Thread [1] 24765 (Suspended : Signal : SIGABRT:Aborted)	
		__kernel_vsyscall() at 0xffffe424	
		raise() at 0xb4ef98df	
		abort() at 0xb4efb220	
		RMainWindow::messageHandler() at RMainWindow.cpp:63 0x8f1cb62	
		qt_message_output() at 0xb5356f65	
		0xb53571ab	
		qFatal() at 0xb53572c9	
		qt_assert() at 0xb5357355	
		RExporter::exportEntity() at RExporter.cpp:524 0x8eff312	
		RExporter::exportEntity() at RExporter.cpp:578 0x8eff500	
		RExporter::exportEntities() at RExporter.cpp:642 0x8eff6d5	
		RGraphicsScene::regenerate() at RGraphicsScene.cpp:111 0x8f07c6b	
		RDocumentInterface::regenerateScenes() at RDocumentInterface.cpp:534 0x8ef0979	
		RDocumentInterface::objectChangeEvent() at RDocumentInterface.cpp:2,053 0x8ef4986	
		RDocumentInterface::applyOperation() at RDocumentInterface.cpp:1,911 0x8ef445e	
		REcmaDocumentInterface::applyOperation() at REcmaDocumentInterface.cpp:5,708 0x88ecfae	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xa4b828e1	
		0xb6a423e3	
		0xb6af06e0	
		0xb6ac201e	
		QScriptValue::call() at 0xb6bd2e67	
		REcmaShellActionAdapter::coordinateEvent() at REcmaShellActionAdapter.cpp:1,279 0x8c5e96a	
		RDocumentInterface::handleClickEvent() at RDocumentInterface.cpp:729 0x8ef12c3	
		RDocumentInterface::mouseReleaseEvent() at RDocumentInterface.cpp:652 0x8ef0eac	
		RGraphicsScene::handleMouseReleaseEvent() at RGraphicsScene.cpp:174 0x8f07fa7	
		RGraphicsView::handleMouseReleaseEvent() at RGraphicsView.cpp:468 0x8f0a9d7	
		RGraphicsViewQt::mouseReleaseEvent() at RGraphicsViewQt.cpp:253 0x8e068fe	
		QWidget::event() at 0xb58da629	
		RGraphicsViewQt::event() at RGraphicsViewQt.cpp:104 0x8e062c0	
		QApplicationPrivate::notify_helper() at 0xb5871d7c	
		QApplication::notify() at 0xb58772c4	
		QCoreApplication::notifyInternal() at 0xb547215b	
		QApplicationPrivate::sendMouseEvent() at 0xb5875152	
		0xb59066b5	
		QApplication::x11ProcessEvent() at 0xb5905d26	
		0xb5932f04	
		g_main_context_dispatch() at 0xb4af0509	
		0xb4af0d10	
		g_main_context_iteration() at 0xb4af0fce	
		QEventDispatcherGlib::processEvents() at 0xb54a2741	
		0xb5932a55	
		QEventLoop::processEvents() at 0xb547131d	
		QEventLoop::exec() at 0xb54715aa	
		QCoreApplication::exec() at 0xb5473701	
		qtscript_QCoreApplication_static_call() at 0xb08dc4b7	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xb100d9e9	
		0xb6a44262	
		0xb6a445f7	
		0xb6bb0f92	
		QScriptEngine::evaluate() at 0xb6bba46f	
		RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:743 0x8797fbc	
		RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:739 0x8797ea0	
		RScriptHandler::init() at RScriptHandler.cpp:31 0x8f3a8ca	
		main() at main.cpp:176 0x8792007	
 186 QCAD (main)Bug ReportMedium QCAD not working on Ubuntu 11.04 x64 Closed
100%
Task Description

Qcad Beta in Ubuntu 11.04 x64

'/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/assistant' 
/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/assistant: error while loading shared libraries: libQtHelp.so.4: cannot open shared object file: No such file or directory
[email protected]:~$ '/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/qcad-trial' 
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so

/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so


(<unknown>:4849): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Loading IM context type 'ibus' failed

(<unknown>:4849): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Loading IM context type 'ibus' failed
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so

/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so


(<unknown>:4849): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Loading IM context type 'ibus' failed
application directory:  "/home/gabriel/opt/qcad-3.0.0-beta-trial-linux" 
working path:  "/home/gabriel/opt/qcad-3.0.0-beta-trial-linux" 
library path:  "/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/plugins" 
Debug:    Init script plugins... 
Debug:    TIMER:  26623 ms -  "loading and initializing plugins" 
Warning:  RScriptHandlerEcma::doScript: engine busy: aborting evaluation of script: 

 "scripts/File/NewFile/NewFile.js" 

 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    Creating storage... 
Debug:    Creating spatial index... 
Debug:    Creating document... 
Debug:    Creating MDI child... 
Debug:    Initialize Viewports... 
Debug:    Init graphics view... 
Debug:    Init scrollbars... 
Debug:    Init rulers... 
Debug:    Init idle and default actions... 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Debug:    lock failed:  "EACTION FINISH: scripts/Snap/Auto/Auto.js" 
Debug:    locker:  "NEW" 
Debug:    lock failed:  "EACTION RESUME: scripts/Idle/Reset/Reset.js" 
Debug:    locker:  "NEW" 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Debug:    lock failed:  "EACTION FINISH: scripts/Snap/RestrictOff/RestrictOff.js" 
Debug:    locker:  "NEW" 
Debug:    lock failed:  "EACTION RESUME: scripts/Idle/Reset/Reset.js" 
Debug:    locker:  "NEW" 
Debug:    Show MDI child... 
Debug:    lock failed:  "RMainWindowQt::subWindowActivated" 
Debug:    locker:  "NEW" 
Debug:    Init event handler... 
Debug:    updateScenes... 
Debug:    updateGuiActions... 
Debug:    notifyListenersSlot... 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Debug:    setActiveSubwindow... 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
/usr/lib/gio/modules/libgiobamf.so: clase ELF errónea: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgiobamf.so
/usr/lib/gio/modules/libgvfsdbus.so: clase ELF errónea: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so

(<unknown>:4849): Gtk-WARNING **: Error loading theme icon 'window-close' for stock: No se ha podido cargar el módulo de carga de imágenes: /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed

** (<unknown>:4849): CRITICAL **: murrine_style_draw_render_icon: assertion `base_pixbuf != NULL' failed

(<unknown>:4849): Gtk-CRITICAL **: IA__gtk_style_render_icon: assertion `pixbuf != NULL' failed

(<unknown>:4849): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_pixels: assertion `GDK_IS_PIXBUF (pixbuf)' failed

(<unknown>:4849): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_width: assertion `GDK_IS_PIXBUF (pixbuf)' failed

(<unknown>:4849): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_height: assertion `GDK_IS_PIXBUF (pixbuf)' failed
Segmentation fault
 199 QCAD (main)Bug ReportMedium Print preview scaling distorts model view Closed
100%
Task Description

- Draw a rectangle, say 100 x 100 (I use mm unit, but does it matter?)
1
- Turn on print preview
- Turn off print preview
- OK
2
- Turn on print preview
- Set scale 1/10
- Lines are thicker now, this is good
- Turn off print previw
- Lines stay thick in model view, should that be so?
3
- Set layer 0 to use dash as line-style
- Turn on print preview
- Looks OK
- Set scale 1/10
- Dashes hardly visible, looks almost like a continuous line

In the end of 2,3 a way to reset line width display in model view is to cancel scaling in print preview, ie. turn on print preview, set scale 1:1. I suppose this is a regression since TP1: model view always is unscaled.

The line-width scaling is quite accurate now: Draw two lines 10 mm apart. Set line-width 0.5mm. Set scale 1:20 and the lines exactly touch.

 216 QCAD (main)Bug ReportMedium CTRL + Left Mouse doesn't work Closed
100%
Task Description

CTRL + left mouse button does not add to current selection

 236 QCAD (main)Feature RequestMedium trial version: teaser dock showing a small web page Closed
100%
Task Description
  • small dock widget showing a web page (for teaser, special sales etc.)
 237 QCAD (main)Bug ReportMedium Image remains displayed when it's layer is changed to h ...Closed
100%
Task Description

Ubuntu 11.04 64 bit.
Image imported into drawing in layer ‘pictures’.
Layer ‘pictures’ hidden.

QCAD 3 beta displays the image when zoomed out so that the whole drawing is visible within the working window.
It ‘disappears’ when the zoom is taken in such that the drawing exceeds the window display.

When the layer ‘pictures’ is visible the image behaves as expected, i.e. always visible.

 239 QCAD (main)Bug ReportMedium part library unit conversion Closed
100%
Task Description
  • insert part in inch into mm drawing
  • block scale correct, but block reference also scaled
 251 QCAD (main)Bug ReportMedium wrong tab names Closed
100%
Task Description

After I open the second file, the tab name of the first file is changed to the name of second file. After that I see two tabs with the same names but with two different files.

 252 QCAD (main)Bug ReportMedium Displayed line thickness too thick. Closed
100%
Task Description

This manifestation happened after I had loaded an existing drawing, made modifications, then used print preview and adjusted the scale to fit the paper.

The file was closed. Upon reopening lines designated as .25mm were unusually thick such that two lines 2mm apart appeared as one solid line. Placing the cursor over the line showed it was comprised of two lines.

Changing the properties of a line to make it thinner did not help with one exception and that was to set the line thickness to default, when the two lines became visible.

 258 QCAD (main)Bug ReportMedium RDwgExporter.cpp#190 Closed
100%
Task Description
Debug:    "RDwgServices::printErrorStackTrace: Requires an integer between 1 and 6." 
Fatal:    ASSERT: "false" in file RDwgExporter.cpp, line 190
./qcad: line 3: 24327 Aborted                 LD_LIBRARY_PATH=. ./qcad-bin [email protected]

 279 QCAD (main)Bug ReportMedium library.js:638: Error: cannot access member `children'  ...Closed
100%
Task Description
  • QCAD was running during the lunch break
    • one drawing opened in print preview
    • another drawing opened (normal mode)
  • switched to another virtual desktop
""
Uncaught exception at /home/martin/workspace/rsframework/scripts/library.js:638:
Error: cannot access member `children' of deleted QObject
638	        if (!isNull(child.children) && child.children().length != 0) {
qsdb> child
Error: cannot access member `toString' of deleted QObject
qsdb> isNull(child)
true
qsdb> .bt
#0  getWidgets(widget = QToolBar) at /home/martin/workspace/rsframework/scripts/library.js:638
#1  <anonymous>(resume = true) at scripts/File/PrintPreview/PrintPreview.js:235
#2  <anonymous>() at /home/martin/workspace/rsframework/scripts/Idle/../EAction.js:237
#3  <anonymous>() at /home/martin/workspace/rsframework/scripts/File/
PrintPreview/../../Idle/DefaultAction/DefaultAction.js:119
#4  <global>() at -1
 284 QCAD (main)Bug ReportMedium Line Spacing Factor get lost in saved documents Closed
100%
Task Description

When I open a saved document, the “Line Spacing Factor” it return to 1.

Tried several times, same result.

Carlo Couvert

Showing tasks 1801 - 1850 of 2036 Page 37 of 41<<First - 35 - 36 - 37 - 38 - 39 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing