QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatus  descProgress
 1752 QCAD (main)Bug ReportLow Not selecting text with sub/superscript Closed
100%
Task Description

Found a strange behaviour with formatted text.

File attached.
‘Draw’-selecting only the yellow text with a little space arround it
- L>R or R>L ⇒ Yellow text not selected.

‘Draw’-selecting only the yellow text with a little space from R>L but crossing the text half way
- Yellow text Selected ⇒ Expected behaviour.

‘Draw’-selecting just including the mentioned little circles.
- Orange L>R or R>L ⇒ Normal texts selected ⇒ Expected behaviour
- Green L>R Yellow not R>L Yellow selected ⇒ Expected behaviour
- Magenta L>R or R>L ⇒ Yellow text not selected ??
- Red L>R or R>L ⇒ Yellow text not selected ??

Version: 3.20.1.0 (3.20.1)
Internet: QCAD.org
Build Date: Apr 13 2018
Revision: dd51609
Qt Version: 5.5.1
Architecture: i386
Compiler: MSVC++ 10.0 (2010)
Windows 7 32-bit

Kind Regards

 1753 TranslationBug ReportLow View > Property Editor: entity types in property editor ...Closed
100%
Task Description

Translations in scripts/ts are not loaded (affects splash screen, property editor, default action, various standard messages, some context menus)

 1756 QCAD (main)Bug ReportLow Polyline area wrong if polyline contains arc segments Closed
100%
Task Description

The area of polylines with arcs can be incorrect.
With only line segments it is correct as far as I can check.
See <Poly-line Area.dxf> ; <Poly-arc Area.dxf>

It does not depend on the quadrant their in nor with what point the start point is.
It is related with the oriëntation.
Flipping or mirroring horizontally induce the error.

Modifications like flip, move & copy may induce another error that locks the oriëntation.
It is noticed that the oriëntation property in the editor does not change anymore when reversing.
Although locked the value of the area property switches between good and wrong.

The master poly in question is a part of an arc and a part of an ellipse exploded 1024/full.
These where recombined to one poly with ‘Create from selection’ and are closed.
Closed as per the last vertex does not point to the start point, logically closed I presume.
The purpose is to sum the error surface for the skewing math.
For now I will use my common sence to distinguish what value is the correct one.
Reversing while found faulty is the solution.

Version: 3.20.1.0 (3.20.1)
Internet: QCAD.org
Build Date: Apr 13 2018
Revision: dd51609
Qt Version: 5.5.1
Architecture: i386
Compiler: MSVC++ 10.0 (2010)
Win7 32bit

Regards

 1757 QCAD (main)Bug ReportLow Modify > Auto Trim: on polyline, followed by undo yield ...Closed
100%
Task Description

Breaking up self-intersecting Polys at segments crossing
can’t be done for the second segment.

Divide:
A new node is inserted and made start and end node.
For the second segment no division occurs or can be made.
Expected is that the segment the nearest to the selecting point is addressed.
Eg. the trim command.

Breakout gap:
- 1 Part fully trimmend of
- Can be undone

Auto trim:
(hint: do file-save first to revert)
- 1 Part fully trimmend of
- Undo will wipe the complete poly

In the file example 1.

Work-arround:
- Divide
- Insert node on the second segment not at the crossing
- Divide at that node
- Move new nodes to crossing

QCAD 3.20.1 Win7 32bit
Kind Regards

 1761 QCAD (main)Bug ReportLow Info Polyline area does not find polylines (II) Closed
100%
Task Description

Selecting Info // Polyline area
And hovering over a drawing with all kinds of entities.
Does not find any polyline on the drawing hovering over them.
Nor clicking on them.

Not a locked layer issue.
All are visible.

 1763 QCAD (main)Feature RequestLow Simple Modify Move function Closed
100%
Task Description

Moving things require an extra click on ‘Delete original’ and a click on ‘OK’

A simple Modify Move functionality will reduce mouseclicks for moving by 2 for every move that is made.

Regards

 1764 QCAD (main)Feature RequestLow Zoom in with middle click Closed
100%
1 Task Description

I would suggest adding a feature Inkscape has, which is that a single middle click zooms in. This is not at the detriment of panning, since the mouse/pen (I use a Wacom tablet) doesn’t move. Right now middle click doesn’t do anything so I don’t think it should be a problem.

Another awesome and related Inkscape zooming feature is that Shift+middle click shifts to window zooming. But with the added bonus that you don’t lose the tool you’re in. Try it out on Inkscape if I’m not clear!

Cheers,
JFL

 1766 QCAD (main)Bug ReportLow Edit > Application Preferences: Tool Settings: cannot a ...Closed
100%
Task Description

I wanted to add a couple of toolbars to the Tool matrix via the Tool Settings application preferences but all options are greyed out (see attached screenshot). I tried with a new config file and the result is the same. Is this the expected behaviour?

 1768 QCAD (main)Bug ReportLow Draw > Polyline > Create From Segments: segments delete ...Closed
100%
1 Task Description

‘Create From Segments’ ‘OG’ includes and admits selection of segments on locked layers.

A)
-When selecting a segment on a not locked layer it can include segments on locked layers that connect to the string. (Assumed wrong)
-A copy of the segments on the locked layer(s) are included in the polyline. (Assumed wrong)
These segments are not removed from the locked layer(s) because of their locked nature. (Intended behaviour)
eg. ‘OG’ & selecting the arc at point A in the example file. The arc is on a not locked layer.

B)
-When selecting a segment on a locked layer it will fully remove segments that connect to the string on not locked layers. (Assumed very wrong)
-Connecting segments on the locked layer(s) will not be converted to a polyline because of their locked nature. (Intended behaviour)
eg. ‘OG’ & selecting the line at point B in the example file. The cyan lines are on a locked Layer.

Both A & B can be undone.

The example is a part of the ‘Skewing project’.

Regards
CVH

 1769 QCAD (main)Bug ReportLow QCAD Help link to "FAQ's (Online) is broken Closed
100%
Task Description

QCAD 3.20.1.3 help link to “FAQ‘s (Online)” is broken and leads to a 404 page.
(Menu → Help → FAQ‘s (Online))

 1770 WebsiteBug ReportLow qcad.org shop language Closed
100%
Task Description

FR - Ok,
DE - Ok,

EN - not OK. Main text is in english, menu is in german.

 1775 QCAD (main)Bug ReportLow Viewports: images sometimes not clipped at viewport edg ...Closed
100%
Task Description

See also:
https://qcad.org/rsforum/viewtopic.php?f=89&t=5657

 1776 QCAD (main)Bug ReportLow Edit > Application Preferences: Tool Settings: cannot c ...Closed
100%
Task Description

Multikey shortcuts are broken in Qt.
QCAD needs its own implementation of shortcut handling which also affects shortcut configuration.

 1779 QCAD (main)Feature RequestLow Layer list, block list, etc: add support for internatio ...Closed
100%
Task Description

The attached screenshot will make clear what the problem is:
“échelle” should be between “cotes” and “platines”, not at the bottom. “e” and “é” must be considered the same letter when ordering alphabetically.

 1780 QCAD (main)Bug ReportLow QCad quits when you double-click a text Closed
100%
Task Description

QCad quits when you double-click a text; What’s wrong, QCad or file?

 1782 QCAD (main)Bug ReportLow Successive middle mouse button zoom in/out: delay betwe ...Closed
100%
Task Description

I very much like the new middle mouse button zoom in/out and congratulate Andrew for implementing it so quickly but there’s an annoying delay that is necessary between successive zoom in/out actions. This is easily understood by comparing it to zooming in/out with the +/- keys. With the keyboard you can repeat zooms as quickly as the keyboard repeat rate allows; with the middle mouse button quick zooms are not possible.

 1783 QCAD (main)Bug ReportLow RArc::splitAt(): fails in some cases Closed
100%
Task Description

RArc::splitAt() works wrong in some cases.
To reproduce execute this script:

            var arc = new RArc(new RVector(0, 0), 100, Math.PI*2, Math.PI/2, true);
            var points = [];
            points.push(arc.getPointAtPercent(1/3));
            var arcs = arc.splitAt(points);
            if (arcs.length == 2) {
                qDebug("OK, arcs count:", arcs.length);
            } else {
                qDebug("FAILED, arcs count:", arcs.length);
            }

            arc.mirror(new RLine(0, 0, 0, 100));

            points = [];
            points.push(arc.getPointAtPercent(1/3));
            arcs = arc.splitAt(points);
            if (arcs.length == 2) {
                qDebug("OK, arcs count:", arcs.length);
            } else {
                qDebug("FAILED, arcs count:", arcs.length);
            }

The first case split in two arcs, but the second splits in one arc only.

I think the reason is the code in RArc::splitAt():

        ...
        if (RMath::getAngleDifference180(a1, a2))*radius()<0.001) {
            continue;
        }
        ...

The RMath::getAngleDifference180() return angle between -pi and pi so absolute value should be used.

 1784 QCAD (main)Bug ReportLow View > Property Editor: Block attribute labels with int ...Closed
100%
Task Description

Bei der Eingabe von Blockattributen im Eigenschaften Editor werden die deutschen Sonderzeichen nicht richtig wiedergegeben.

When entering block attributes in the Properties Editor, the German special characters are not displayed correctly.

 1785 QCAD (main)Bug ReportLow Template / Viewport scale issue Closed
100%
Task Description

Given: Template with prepared Paper Space Frame/Titleblock scale = 1:1.
Drawing 1:1
First Viewport / scale 1:1 / inserted in Paper Space = everything fine,
Second Viewport / scale 0.02 will scale the Paper respective to the new Viewport scale but the Frame/Titleblock isn’t scaled.

 1786 QCAD (main)Bug ReportLow Block > Select Block References: not using active block ...Closed
100%
Task Description

... can’t find Block References if the Block which contains the Block References (Attributes) isn’t selected prior with the mouse.

The Selection Filter will find the Block References regardless which block is chosen in the Block List.

 1787 QCAD (main)Bug ReportLow View > Property Editor: Layer combo box not sorted Closed
100%
Task Description

Layer combo box in the property editor is not sorted.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5714

 1790 QCAD (main)Bug ReportLow Info fuction returns right dimensions but drawing dimen ...Closed
100%
Task Description

no task description

 1791 QCAD (main)Bug ReportLow Edit > Paste: relative zero point not set Closed
100%
Task Description

If I insert a content from the Clipboard to the drawing a new Relative Zero Point isn’t created.
I’m not able to use e.g. a restriction regarding to the last inserted content. QCAD will use the last Relative Zero Point in the drawing even if I already inserted a content.

Screenshot:
Clipboard content = circle

1. First insert

Restriction horizontal

2. Second insert

 1792 QCAD (main)Bug ReportLow Dimension > Angular: transformations broken Closed
100%
2 Task Description

(I originally described the problem in the forum: https://qcad.org/rsforum/viewtopic.php?f=33&t=5721 )
(The problem was also reproduced by user “Husky” so it not installation specific.)

I have a model where one of the details is as shown in attachment 1

However, when I create a viewport and display the part in the the layout the angular measurement is another. See attachment 2.

In the model it should be noted that the part displayed is a detail copied with a different scale as to Zoom in on a detail in order to put dimensions on it. It was created by copying a part of the model and pasting it back in the model but with 3x zoom.

I have also included the full .dxf file in the hope that it helps you both reproduce and fix this issue

Note: The same problem seems to also produce “ghostlines” in other viewports in the layout which is not present in the model. Removing the angular measurement also removed the ghostline. You can observe the issue by looking at layout2 and you can see a line (dimension layer) going from top right corner of the viewport towards the lower left. This line is not present in the model and appears to be some strange extension to the angular dimension the detail that is just to the top right in the model.

System:
Macbook Pro 15”, OS X 10.13.6

(Can also be reproduced in Linux version)

QCad version:

Version: 3.21.2.0 (3.21.2)
Build Date: Jul 9 2018
Revision: f9cea14
Qt Version: 5.10.0
Architecture: x86_64
Compiler: Clang 8.0.0

 1793 QCAD (main)Bug ReportLow Ruler functionality is compromised by Auto Grid setting Closed
100%
1 Task Description

Regarding to an observation by the forum member Horst1803
http://www.qcad.org/rsforum/viewtopic.php?f=92&t=5725

The ruler functionality is compromised by Graphics View / Grid settings.
To show the full Ruler functionality “Automatic scale grid” has to be activated. I think that is not intended behavior.

Case: Appearance / Show rulers = activated

Application Preferences / Graphics View / Grid

on - Automatically scale grid
on - Automatically scale meta grid
off - Solid grid lines
= Rulers visible
= Graduation visible
= Labels visible

off - Automatically scale grid
on - Automatically scale meta grid
off - Solid grid lines
= Rulers visible
= Graduation invisible
= Labels invisible

 1794 QCAD (main)Bug ReportLow Detect Duplicates / Options / Refresh Icon missing Closed
100%
Task Description

Please see also http://www.qcad.org/rsforum/viewtopic.php?f=32&t=5745

 1796 QCAD (main)Bug ReportLow File > Open Recent: crash when file is in Google Drive  ...Closed
100%
Task Description

When a file is opened from “File→Open Recent” on QCad Pro it gives a 100% repeatable crash if the file is on a folder synchronized with Google Drive. If the file is opened using “File→Open” instead it works as expected. See attached crash-log.

OSX specific. Does not happen on Linux with synchronized Google Drive folder

System: OSX 10.13.6

QCad version:

Version: 3.21.2.0 (3.21.2)
Build Date: Jul 9 2018
Revision: f9cea14
Qt Version: 5.10.0
Architecture: x86_64
Compiler: Clang 8.0.0

 1797 QCAD (main)Bug ReportLow Keyboard shortcuts not saved between sessions Closed
100%
Task Description

In 3.21.1, and 3.21.2 a change to a shortcut looses all previous shortcut changes.
This does not become apparent in the current session; a modified shortcut works fine together with all the previous modifications, until you close QCAD.
But-
When you re-open QCAD, the only customised shortcut available is the last one that was changed, every other customised keyboard shortcut has gone back to default.

Windows 10 64 , Gigabyte laptop i7 processor

 1800 QCAD (main)Bug ReportLow circle/arc intersection bug with line Closed
100%
Task Description

There is a case that qcad do not detect intersection between a circle/arc and a line. Attached is an example.

 1802 QCAD (main)Bug ReportLow Startpoint indication disapears for some entities while ...Closed
100%
Task Description

Having a multi selection and at least one ‘older’ arc the startpoint indication in red of some entities might disappear.

Entities that suffer from this are:
Other arcs
Polyline
Splines

Only the ‘oldest’ arc in selection will have a startpoit indication.
Multi selection of ‘newer’ entities from the list above will not if an ‘older’ arc is part of the selection.
Deselecting de ‘older’ arcs will reveal the startpoints up to the ‘oldest’ arc.

In the file provided entities where drew in order from left to right.
Select all and start deseleting arcs from the left.

The behaviour is affected by changing the draw order property and a save/close/open.
In the second file the rightmost arc was set to draw order 7, the same as the 4th was.
After save/close/open it is renumbered to 8 and the behaviour is different as in the firts file.

Regards

 1805 QCAD (main)Bug ReportLow Modify > Split Entities: broken for logically closed po ...Closed
100%
Task Description

See http://www.qcad.org/rsforum/viewtopic.php?f=31&t=5825&p=21761

 1807 QCAD (main)Bug ReportLow The ORDINAL 3906 not found in LIBEAY32.DLL Closed
100%
Task Description

Hello
the message: The ORDINAL 3906 was not found in the LIBEAY32.dll dynamic-link library. is displayed each time QCAD is opened.
How to fix this problem
thanks in advance
cordially**

 1808 QCAD (main)Bug ReportLow Property Editor: Changing width, height, orientation fo ...Closed
100%
Task Description

Property Editor / Size adjustment for Polygon rectangle accepts no changes for Width and Height. Was perfect working till 3.21.2

 1809 QCAD (main)Bug ReportLow Draw > Viewport > Add Viewport: layout dialog combobox  ...Closed
100%
Task Description

Drawing with more than 4 Layout Blocks (Layout1, Layout2 etc),

Add Viewport, choose rectangle for viewport, Dialog pops up to choose a Layout Block,
I choose Layout4 - the Viewport is placed on Layout2,

next new Viewport - placed on Layout3 - the Viewport will be placed again on Layout2 ...

 1812 QCAD/CAMBug ReportLow Coordinate display: coordinates not updated while mouse ...Closed
100%
Task Description

The coordiantes (in the lower left corner) freeze while mouse is moving. Updates as soon as the mouse is stopped.

This slows me down considerably. I have to stop, wait (too see the coordinates), move, stop, wait, move back, stop, wait, move, stop wait... This gotta be a bug?

MacOS 10.12.6

 1814 QCAD/CAMBug ReportLow FS#1813 Revisited Closed
100%
Task Description

 FS#1813  Revisited. (Several bugs in QCAD/CAM 3.21.3. when generating G-code in “G-code Laser (offset).)

Hi Andrew,

After closing the bug notification I realised I didn’t add the DXF. My apologies for not attaching the DXF-file at hand.

Fortunately I am not the only one;

You can fix the missing G01 by replacing your file postprocessors/GCodeLaserOffsetMM.js with the attached updated file.

Since it was not attached, that makes two of us.

Anyway I have attached the DXF-file to be tested.

 1817 QCAD/CAMBug ReportLow CAM Export: offset fails for contours with arcs (tolera ...Closed
100%
Task Description

After regenerate selected toolpath OR regenerate all toolpath.

The result of the output is every time different.

When pushed for example 2 or 3 times this button.

See pictures

 1818 DocumentationTaskLow QCAD Reference Manual / Paste along Entity ... Closed
100%
Task Description

... describes basically the “Paste” tool and not the “Paste along Entity” tool.

 1819 QCAD (main)Feature RequestLow  Additional Options for "Paste along Entity" Closed
100%
Task Description

Please see:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22098#p22098

 1825 QCAD (main)Bug ReportLow File > Svg Export: text exported with wrong height Closed
100%
Task Description

If option “Preserve geometry” is activated, texts are exported at a wrong height if the drawing unit is not the same as the SVG output unit.

 1828 QCAD (main)Bug ReportLow Chinese language not loading correctly Closed
100%
Task Description

Most of the Chinese items cannot be shown correctly. But when I check the qm files, the translation are there and the contents are correct.

I’m using the Pro version 3.21.3.0

 1829 QCAD (main)Bug ReportLow Incorrect font weights in macOS 10.14 Mojave Closed
100%
Task Description

See QTBUG-69955 which affects QCAD on Mojave:
https://bugreports.qt.io/browse/QTBUG-69955

 1830 QCAD/CAMSuggestionLow HP7580 Penplotter Closed
100%
Task Description

Hi Andrew,

I was fiddeling around with a copy of the hpgl postprocessor, and has it adapted, up and running for a HP7580 penplotter. You may add this to QCAD if you like.

Poking and peeking in the other postprocessor files, I found enough information to generate a very acceptable hpgl.plt file now, including the required pen changes.

The purpose of a ‘bracket-field’ (as [S] ) is clear to me. Where are [S#] and [S!] used for?

 1831 QCAD (main)Bug ReportLow Block > Copy Block: attributes of block references are  ...Closed
100%
1 Task Description

1) Open the attached dxf file
2) Right click on “vne_vent_odvod_ec_3f” block in Block list and select Copy block
3) Choose name
4) Insert reference of this Copy block to the modelspace
5) Save the file
6) Close and reopen the file

RESULT: Attributes of block references included in the original block are missing in the copied block.
Immediately after insertion of the copied block I can see in the property editor, that block reference attributes are not “conected” to the block reference, but they are still visible. They disappear when the file is reopen.

Alternative way I use to copy this kind of blocks without error: Open block I want to copy, Select all entities, reference copy of them, paste to modelspace, select them in modelspace and choose create block.

 1832 QCAD (main)Bug ReportLow Modify > Explode: attributes of block references are or ...Closed
100%
1 Task Description

In a the modelspace I have a block reference of a block(parent), which includes block references (with attributes) of another blocks(child). Than I select this parent block reference and choose Explode. The result is, that the child block references have visible attributes, but they are not connected to the block reference anymore (I can not see them in property editor when the child block is selected). Than when I choose synchronize attributes, new attributes with default values will appear.
I am not sure it his is a bug or expected behavior of the Explode feature.

If it is not a bug, I would like to have new Extract feature, which would copy the content of the selected block reference and immediately insert it exactly to the same place (attributes would be still connected to child references) Extracted block reference would be than removed. Optionally, it could delete the block definition if it is not used anymore in the drawing (but there is already Block Purge feature which will do this).

 1834 QCAD (main)Bug ReportLow Property Editor: Attributes of block reference not show ...Closed
100%
Task Description

- Create block with attributes
- Create block reference
- Select block reference
→ Property editor does not show attributes

 1845 QCAD (main)Bug ReportLow Block reference points cannot be supressed in printer o ...Closed
100%
Task Description

Drawing preferences have no effect on point type when printed or in print-preview for block reference points.
Notice in “print output”, the “Dot” (Block reference point) is displayed (drawing preferences are ignored).

See attached photos.

 1850 QCAD/CAMBug ReportLow Toolpath error Closed
100%
Task Description

Hi Andrew,

While generating a toolpath I stumbled upon an odd error.

 1852 QCAD (main)Feature RequestLow Layer state management Closed
100%
Task Description

- Store layer states under a name
- Restore layer states
- Remove layer states object
- Update layer states object

 1853 QCAD (main)Bug ReportLow Duplication of input fields in Property Editor 3.21.3.1 ...Closed
100%
Task Description

look at
https://www.qcad.org/rsforum/viewtopic.php?f=89&p=22762&sid=26fade8dcfd514372faaf98834df4413#p22762

Showing tasks 1851 - 1900 of 2237 Page 38 of 45<<First - 36 - 37 - 38 - 39 - 40 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing