QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatus  descProgress
 1914 QCAD/CAMFeature RequestLow CAM layer On/Off Closed
100%
Task Description

Hallo Andrew

If CAM layer invisible do not 3D Simulate and do not write G-code.

 958 QCAD/CAMBug ReportLow CAM Export: points not exported Closed
100%
Task Description

Points are not being exported.

 1817 QCAD/CAMBug ReportLow CAM Export: offset fails for contours with arcs (tolera ...Closed
100%
Task Description

After regenerate selected toolpath OR regenerate all toolpath.

The result of the output is every time different.

When pushed for example 2 or 3 times this button.

See pictures

 1820 QCAD/CAMBug ReportMedium CAM Export: exporting text entities broken Closed
100%
Task Description

Hi Andrew,

Kubuntu, QCAD/CAM 3.21.3

Font Standard. Selected as ‘single line’ font for engraving with mill or laser.

While CAM Exporting as G-code Laser (Offset) MM, or as Linux CNC, Exporting gets trapped in a loop.

In Font Standard the glyph’s ? & $ @ s S Q and 2 contains unwanted Z-movements. It seems these glyphs entities are not alligned properly; endpoint last line does not meet startpoint next line; why else the Z-movements?

Could this misallignment also traps Exporting?

 1134 QCAD/CAMBug ReportLow CAM Export: cut inner paths before outer paths broken Closed
100%
Task Description

This option seems to only work with the script debugger enabled.
See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3091

 2000 QCAD/CAMBug ReportLow CAM > Nesting: misleading "Sheet added" confirmation Closed
100%
Task Description

Within the nesting preparation:
A left mouse click to add a sheet will always be confirmed with “Sheet added”, regardless of a proper selection or where the left click is done in Model_Space.

 2001 QCAD/CAMBug ReportLow CAM > Nesting: Alignment fails Closed
100%
Task Description

Description for the CAM Nesting alignment:

Quote:
Alignment: Parts are arranged with the chosen alignment in mind. An alignment of “Left - Bottom” means that parts are shuffled to the left (primary alignment) and towards the bottom (secondary alignment).
Quote end

I tested a few scenarios. e.g
a Top Left, Align → leads to a top right alignment,
a Top left, Hull → leads to a Bottom Left alignment,
etc.

 1962 QCAD/CAMBug ReportLow CAM > Drill Toolpaths: Cannot be edited / updated from  ...Closed
100%
Task Description

Hallo Andrew,

Found a bug in the drill toolpath generator.

 1946 QCAD/CAMBug ReportLow CAM > Cam Legacy Export: Cut inner paths before outer p ...Closed
100%
Task Description

The option “Cut inner paths before outer paths” is ignored, causing trouble when outer paths are cut first.

Attached is a link to the script files and gcode examples.

 1593 QCAD/CAMBug ReportLow CAM > CAM Export: ZH in header always yields default va ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=4914

 1149 QCAD (main)Bug ReportLow Calculate error Closed
100%
Task Description

If I want to draw circle with poin and raduis and write to radus window formula 4^2, Qcad calculates 4+2 not 4².

 1334 QCAD (main)Bug ReportLow CAD tool bar: entering alternative menu not possible Closed
100%
Task Description
  1. Click line tools button
  2. Click button to draw lines with 2 points
  3. Draw line
  4. Right click
  5. Click back button in CAD tool bar
  6. Click Circle tools button

Circle tools not shown

 320 QCAD (main)Feature RequestLow CAD Tool Bar: Back button should go back one menu Closed
100%
Task Description

CAD Tool Bar: Back button should go back one menu. Possibly use two buttons, one to go back to the previous tool bar, one to go back to the main tool bar.

 626 QCAD (main)Bug ReportLow CAD font styles not saved (except standard) Closed
100%
Task Description

CAD font styles not saved (except standard)

 1611 QCAD (main)Feature RequestLow Cabinet projection at 30 degree also Closed
100%
Task Description

Hi Andrew,

Cabinet projections are usually drawn at 45 or 30 degrees, having drawn up many furniture configurations over the years, would it be possible to add options for 45 and 30 degrees at all?

Regards

Clive

 623 QCAD (main)Feature RequestLow C++ plugin interface Closed
100%
Task Description

C++ plugin interface to add functionality from existing C / C++ libraries to QCAD.

 1637 QCAD (main)Bug ReportLow Buttons Layer List Widget acting on other open file  Closed
100%
1 Task Description

With multiple files open 4 of the 5 buttons of the Layer List Widget are acting on an other file that is open instead of acting on the file in focus.
in this condition only Add Layer YA acts on the file in focus.

Not easy to reproduce.
Encountered it more frequent
after copy with ref and pasting.
with more then 2 files open.
with similar drawing file names.
Did reproduce after several hopping between files.
Usually acts on the first open file but this can be different as in the example.

workarround none; save all; close all; close Qcad; reopen and redo.

 759 QCAD (main)Bug ReportLow Button "Flip Block" doesn't remains Highlighted ... Closed
100%
Task Description

Insert Block:

If I use the “Flip Block” option (Horizontal and/or Vertical) the Buttons doesn’t remains Highlighted. It should remain Highlighted ... ;-)

 944 QCAD (main)Bug ReportLow Build system: some dependencies are not rebuilt when ne ...Closed
100%
Task Description

As came up towards the end of  FS#892 .

What happens is a change in src/3rdparty/dxflib/src/dl_dxf.cpp does trigger a rebuild of release/libdxflib.a, but this does not, in turn, trigger a re-link of plugins/libqcaddxf.so, a (the?) consumer of libdxflib.a.

This causes partial rebuilds to be broken (I think I got puzzled by this earlier too).

How to reproduce: on a fully built tree, `touch src/3rdparty/dxflib/src/dl_dxf.cpp’ then `make’. Nothing but libdxflib.a gets rebuilt.

 1854 QCAD (main)Bug ReportLow Build failure due to missing RZip.h Closed
100%
Task Description

Linux, gcc:

make[4]: Entering directory '/home/ice/w/qcad/qcad/src/scripting/ecmaapi'
g++ -c -include release/qcadecmaapi -pipe -O2 -w -D_REENTRANT -fPIC -DQT_DISABLE_DEPRECATED_BEFORE=0x000000 -DQCAD_DLL -DQCADECMAAPI_LIBRARY -DQT_NO_DEBUG -DQT_PLUGIN -DQT_PRINTSUPPORT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_HELP_LIB -DQT_UITOOLS_LIB -DQT_DESIGNER_LIB -DQT_UIPLUGIN_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_SCRIPT_LIB -DQT_SCRIPTTOOLS_LIB -DQT_SQL_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CORE_LIB -DQDESIGNER_EXPORT_WIDGETS -I. -I../../core -I../../core/math -I../../grid -I../../snap -I../../gui -I../../entity -I../../operations -I../../scripting -I../../stemmer -I. -Igenerated -Iadapters -I../../io/dxf -I../../spatialindex -I../../3rdparty -I/home/ice/w/qcad/qcad/src/zip -isystem /usr/include/x86_64-linux-gnu/qt5 -isystem /usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -isystem /usr/include/x86_64-linux-gnu/qt5/QtSvg -isystem /usr/include/x86_64-linux-gnu/qt5/QtOpenGL -isystem /usr/include/x86_64-linux-gnu/qt5/QtHelp -isystem /usr/include/x86_64-linux-gnu/qt5/QtUiTools -isystem /usr/include/x86_64-linux-gnu/qt5/QtDesigner -isystem /usr/include/x86_64-linux-gnu/qt5/QtUiPlugin -isystem /usr/include/x86_64-linux-gnu/qt5/QtWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtGui -isystem /usr/include/x86_64-linux-gnu/qt5/QtScript -isystem /usr/include/x86_64-linux-gnu/qt5/QtScriptTools -isystem /usr/include/x86_64-linux-gnu/qt5/QtSql -isystem /usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -isystem /usr/include/x86_64-linux-gnu/qt5/QtNetwork -isystem /usr/include/x86_64-linux-gnu/qt5/QtXml -isystem /usr/include/x86_64-linux-gnu/qt5/QtCore -Irelease -isystem /usr/include/libdrm -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -o release/RScriptHandlerEcma.o RScriptHandlerEcma.cpp
In file included from RScriptHandlerEcma.cpp:372:0:
generated/REcmaZip.h:15:26: fatal error: RZip.h: No such file or directory
                 #include "RZip.h"
                          ^~~~~~~~
compilation terminated.
Makefile.Release:3622: recipe for target 'release/RScriptHandlerEcma.o' failed
make[4]: *** [release/RScriptHandlerEcma.o] Error 1

Seems to have been introduced in 854baacb, it seems.

 1177 QCAD (main)Bug ReportHigh Bugs on Win 7- 64bit Closed
100%
Task Description

Just installed (31 jan 2015) on Win 7 64 bit. Two bugs are immediately apparent...

 bug 1 : Network drives are not listed in the file open or import dialogs - no way to access files stored on networked drives. (This is not a windows configuration error- all my other apps work perfevtly ok.)

 bug 2 : After about 5 minutes of initial exploration immediately after installation a window pops up... Trial Expired: The trial add-on CAM is no longer active (restart required).

Note: I do have neither of these problems on Windows XP (32 bit) which I installed yesterday

 1437 QCAD (main)Bug ReportLow Bug with Polyline > Offset Closed
100%
Task Description

Spotted a bug with Polyline > Offset (OQ)

On the attached file (png image, link : http://nikel.ovh/~tukuyomi/oq_bug.png ), the white entity is a polyline (1 line, 1 arc, 1 line).
Using Polyline > Offset (OQ) with a big value (1100 in my case), I expect to get the green polyline.
What I have is the red one (also CPU is maxed for some seconds every time I move the mouse.)

 1963 QCAD/CAMBug ReportLow Bug Font Standard OR Cam Config Closed
100%
Task Description

Hallo Andrew

Confronted with a bug in font Standard glyph ”s” (small S),
and a solution.

 493 QCAD (main)Bug ReportVery Low Bug File's Name Closed
100%
Task Description

If in the file’s name I’ve “/” (for ex. 2012/02/10) QCAD substite with “:” (2012:02:10). Regard the file’s name in the tab of QCAD.

 1105 QCAD (main)Bug ReportLow Bug - Layers lost when using Isometric Projection tool Closed
100%
Task Description

Windows 8.1

Layers lost when using Isometric Projection tool

Test case

1.Set up layers.
2.Draw shape (I used a square).
3. Select shape and use Isometric tool (PJ).
5. Layers are lost as soon as reference point is selected.

please see screenshots:

 819 QCAD (main)Feature RequestLow Bring back option to make Hatch patterns in .dxf for QC ...Closed
100%
Task Description

Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2445

 857 QCAD (main)Bug ReportLow Breakout / Autotrim not working Closed
100%
Task Description

Windows 7-64

Please see attached a simple test to demonstrate the problem.

Breakout tool

1. When selecting the top half of the circle - the top half of the circle ‘breaks’ out as expected.
2. When selecting the bottom half of the circle - the whole circle disappears!

Autotrim tool

1. When selecting the top half of the circle - the trim seems to work.

2. When selecting the bottom half of the circle - no trim happens at all!

 256 QCAD (main)Feature RequestLow Break out segments of ellipses Closed
100%
Task Description

Break out segments of ellipses

 731 QCAD (main)Bug ReportLow Break out segment: fails in some cases Closed
100%
1 Task Description

See fs731.dxf

 1078 QCAD (main)Bug ReportLow Break out segment: break out last segment of ray / xlin ...Closed
100%
Task Description

See:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3005

 1040 DocumentationBug ReportLow Break out Manual on Circle/Ellipse does not respect Rem ...Closed
100%
Task Description

3.4.7 trial as well as community Git 9d3979

  • Draw a circle
  • B2
  • Make sure “Remove segment” is ticked
  • Select circle, then select two points to break out in between

Expected:

  • Segment gets removed (not really, but read on)

Actual:

  • Segment does not get removed, but circle is indeed broken into two arcs

Same for an ellipse.

I can see that by selecting two points on a closed circular shape it’s nigh impossible to tell which segment the user actually wants to remove :)

The documentation doesn’t mention this corner case. For clarity, a note detailing this effect a bit should be added to the docs.

On a slightly related note, I do not see why the feature couldn’t work on Polyline objects as well (with the same corner case restriction if it’s a closed polyline).

Very useful feature btw, thanks for it.

 166 QCAD (main)Bug ReportLow break out Closed
100%
Task Description

break out for top segment of arc broken

 713 QCAD (main)Bug ReportLow Box select selects invisible blocks Closed
100%
Task Description

Make sure that block references of hidden blocks cannot be selected.

 1305 dxflibPerformance IssueLow Bottleneck in DL_Dxf::toReal caused by std::locale Closed
100%
Task Description

Loading any larger dxf file takes very long because of this line:
istr.imbue(std::locale(”C”));

The call to std::locale is very slow. File-loading can be speed up by approximately factor 5 times on my system when replacing it. I just removed that line and instead added the following in DL_Dxf::in so it is changed only once per file:

std::locale oldLocale = std::locale::global(std::locale(”C”)); // use dot in numbers
while (readDxfGroups(fp, creationInterface)) {}
std::locale::global(oldLocale);

 10 BookBug ReportLow Book numbering in PDF is incorrect Closed
100%
Task Description

The numbers in the book don’t match with the bookmarks numbers in the PDF as shown in Acrobat Reader.

 4 BookBug ReportMedium Book "CAD Instruction" layout issues Closed
100%
1 Task Description

Post all kind of layout issues for the book “CAD Instruction” here, e.g. overlapping text.

 1592 QCAD (main)Bug ReportLow Bold in the text editor causes transaction fail. Closed
100%
Task Description

Using the bold function (button) in the text editor causes transaction fail on new text entries. Emboldening selected text on existing text shows bold in the editor but this does not carry through to drawing or print preview views.

 1237 QCAD/CAMBug ReportMedium Blocks should be layer agnostic Closed
100%
Task Description

I have created a block from a selection. I have then later created more items on my CAD page using that block, then later yet, moved the objects to a new layer. I noticed that while the object has accepted being on the new layer, the color hasn’t changed to the new layer’s color. I can only get the line color to change if I go into the block itself and move the individual segments of the block to that new layer, then save the new block (which, by the way, I can’t save over the existing block?!?!)

In the sample file attached, you will see that the block item in the 3 o’clock position is in layer 0, while the rest are in “Vent Holes” layer. If you make layer 0 hidden, the one block is hidden (like it should), but the block item refuses to take on the layer’s color even though the block’s color is “By Layer”

 1909 QCAD (main)Bug ReportLow Blocks invisible when loading disappear when made visib ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=6377

Regression caused by fix to  FS#1899 .

 748 QCAD (main)Feature RequestLow Blocks ... Closed
100%
Task Description

It would be nice ...

- to be able to use " and / in Block names what is really helpful in the Inch and Fraction world ... ;-)

- the ability to overwrite an existing Block what is often much easier/faster than editing a Block ;-)

- After selecting a Block you get the info of the Block name in the Property Editor (Geometry / Referenced Block).
If I need to edit this Block I have to go to the Block List - have to search for this name because it is not marked .... and of course it is a long long list.
It would be nice to have a “Edit this Block” Button in the Property Editor / Geometry / Referenced Block dialog ... ;-)

 555 QCAD (main)Feature RequestLow Blöcke zählen .... Closed
100%
Task Description

Eine Zählfunktion die erfasst wie oft ein Block in einer Zeichnung vorhanden ist.

Hintergrund ist das es damit eine Unterstützung gäbe die das erstellen von Stücklisten etc. erleichtert würde.

Die Anzahl der Blöcke könnte z.B in der Block List eingeblendet werden wie z.B.: “Schraube M6x40 (17x)” oder auch in einer extra Text Liste.
Zudem könnten so auch nicht (oder nicht mehr) benutze Blöcke ermittelt werden wie z.B. “Schraube M6x20 (0x)” welche dann aus der Zeichnung entfernt werden könnten.

Siehe auch:

http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=1920

 558 QCAD (main)Feature RequestLow Blöcke aus dem Editiermodus direkt in der Library speic ...Closed
100%
Task Description

Blöcke aus dem Editiermodus direkt in der Library speichern zu können wäre eine erheblicher Arbeitsersparnis.

Wenn ich persönlich einen Block in einer Zeichnung erstelle überlege ich mir natürlich gleich ob ich diesen nicht auch in anderen Zeichnungen verwenden könnte. Somit erhalte ich leicht eine Umfangreiche Library die mein Leben leichter macht .... ;-)

 1030 QCAD (main)Bug ReportLow Block->Create Library Item Issue Closed
100%
Task Description

I create a number of library items to create parts assemblies..

I will build a component in a drawing that has other components in its own layer then isolate the component and only select it. I then use Block→Create Library Item to create a component, set it origin and save the item.. When I open the item, there apears to be a set of duplicate lines generated. I have to select all the components and do a detect duplicates then delete them before doing anything else with the drawing.. I found this issue by trying to create a cutaway view then adding a crosshatch. The crosshatch tool does not like lines on top of lines..

 737 QCAD (main)Bug ReportLow Block with Circle - can't snap to ... Closed
100%
Task Description

XP32 / QCAD 3.0.5

Block with Circles - can’t snap to “Reference”, Intersection.

 168 QCAD (main)Bug ReportLow block visibility Closed
100%
Task Description

disable for now or implement

 1944 QCAD (main)Bug ReportLow Block toggle switch for visibility fails Closed
100%
Task Description

3.23.02 Block toggle switch for visibility fails.
3.23.0 Block toggle switch for visibility works.

 1550 QCAD (main)Bug ReportLow Block references: mirrored block references in 3rd part ...Closed
100%
Task Description

Files imported from other CAD applications might contain blocks that are mirrored if the block reference uses an inverted extrusion direction.

 1845 QCAD (main)Bug ReportLow Block reference points cannot be supressed in printer o ...Closed
100%
Task Description

Drawing preferences have no effect on point type when printed or in print-preview for block reference points.
Notice in “print output”, the “Dot” (Block reference point) is displayed (drawing preferences are ignored).

See attached photos.

 1395 QCAD (main)Bug ReportLow Block reference not selectable Closed
100%
Task Description

Block references to blocks with an origin other than 0,0 are not selectable.

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=89&t=4063

 1481 QCAD (main)Bug ReportLow Block List: update changes selected item Closed
100%
Task Description

- Select a block in the block list.
- Toggle the visibility of another block or add a block, etc.
- Selected block changes

Showing tasks 1801 - 1850 of 2001 Page 37 of 41<<First - 35 - 36 - 37 - 38 - 39 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing