QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatus  descProgress
 2150 QCAD (main)Bug ReportLow Modify > Stretch: block with attribute not moving Closed
100%
Task Description

Create block with attribute definition (attribute definition has lowest draw order in block).

Create block reference from block.

Modify > Stretch with area around block reference.

Block reference does not move.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7895

 2152 QCAD (main)Bug ReportLow Status change for Visibility in Viewports fails Closed
100%
Task Description

Status change for Visibility is without any effect on Viewports in Paper_Space.

Case:
Entities drawn on a layer in Model_Space. Visibility on/off works.
Situation covered with a Viewport, placed in Paper_Space, Edit content launched for that Paper_Space, Visibility on/off doesn’t works.

It was properly working in previos QCAD versions ...

 2153 QCAD (main)Bug ReportLow Freeze program when using text tool Closed
100%
Task Description

Using version 3.25.2.4

Add or change text.
Inside the rich tab I try to change the text height.
The program freezes.
Tried with different fonts.

 2154 QCAD (main)Bug ReportLow View > Library Browser: '0' shortcut breaks value enter ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7900

 2156 QCAD (main)SuggestionLow Add an option to XP preferences to include circles or n ...Closed
100%
1 Task Description

Andrew,
unrelated to any OS or version.

Circles do explode to polylines with two arc segments.
Discussed earlier and very correct because a full circle bulge would be a mathematical limit situation.

When there is no option to ‘Undo’ anymore or when the file was saved & loaded there is no easy way back.

One of the reasons why I isolate circle entities if I might going to use XP as in the file here:
https://qcad.org/bugtracker/index.php?do=details&task_id=2155
Even knowing it, I still make more mistakes as I would like. ;-)

It would be nice to be able to exclude circle entities from the GUI explosion action XP.
Can be simply implemented in the top of Explode.explodeSelection with an extra preference in AppPrefs, default =true.

On the other hand, the explosions of circles used internally in various methods should remain.

Regards,
CVH

 2158 QCAD (main)Bug ReportLow dwg2bmp: -origin does not export origin Closed
100%
Task Description

-origin has no effect, origin is not drawn in export

 2163 QCAD (main)Bug ReportLow File > SVG Import: parsing path data with implicit sepa ...Closed
100%
Task Description

Path data might contain leading zeroes to indicate an implicit separator:

“1 02” should be equivalent with “1 0 2”, not “1 2”.

 2165 QCAD (main)Bug ReportLow Rectangle with Size (RS) doesn't remember Fill, RoundCo ...Closed
100%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7900
Report: https://qcad.org/rsforum/viewtopic.php?f=33&t=7900#p30977

Rectangle with Size (RS) doesn’t update the Fill, RoundCorners & Radius settings shared under the [Shape] header in QCAD ini.

Explained as group synchronization while the Polygon methods have more settings in common, although not shared.

In the summary there are more minor issues listed.
All have a bar in the Options Toolbar that disappears after the first is drawn.

I rather would opt for all individual settings ...
... or all grouped.

Regards,
CVH

 2168 QCAD (main)Bug ReportLow Explosion of a bulging Polyline with Widths may include ...Closed
100%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Follow up on: https://www.qcad.org/bugtracker/index.php?do=details&task_id=2023
The zero crossing at 180° turn is fixed.

Found two very minute Line segments where the Width is set zero.
Revision dxf included.

Referring to the grid they are rendered about 0.0002 long.
They are in the order of 5e-15 and less or simply zero long in this case (<1ULP).
Results may vary in length ... and vary after Save/Revert.
Files included: PolyWidthErrLargeArc_v2.csv (a/b)

Not encountered on a Polyline with line segments.

Regards,
CVH

 2170 QCAD (main)Bug ReportLow Draw > Text: Wrong color for formatted text blocks usin ...Closed
100%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

File & picture included
Work around: Chop it up or use a TTF font

Regards,
CVH

 2171 QCAD (main)Bug ReportLow Scaling a block reference should not scale line type pa ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7948

 2172 QCAD (main)Feature RequestLow Modify > Property Painter: Add alpha property for hatch ...Closed
100%
2 Task Description

The alpha property is a new feature. Now that we are using it it can be added to tools like the “Property Painter”.

 2173 QCAD (main)Feature RequestLow View > Selection Filter: Add alpha property for hatches Closed
100%
2 Task Description

Add alpha property to filter for hatches.

 2183 WebsiteBug ReportLow Dummy (spam) Closed
100%
Task Description

no task description

 2184 QCAD (main)Bug ReportLow Spam Closed
100%
Task Description

spam

 2185 QCAD (main)Bug ReportLow spam Closed
100%
Task Description

spam

 2186 QCAD (main)Bug ReportLow Import and Paste pastes old content Closed
100%
Task Description

When importing dxf-file or pasting dxf-drawing from other window old content from a previous import is pasted. This seems to be connected to the opened file and can not be replaced, thus making it impossible to add new parts to the drawing. Clipboard Display shows correct part, not the same as what is pasted.

Version:
3.25.2.0 (3.25.2)
Webbsida:
QCAD.org
Byggdatum:
Sep 4 2020
Revision:
4a61501
Qt Version:
5.13.2
Arkitektur:
x86_64
Kompilator:
MSVC++ 14.0 (2015)

 2187 QCAD Community EditionBug ReportLow X Scale text property is not saved Closed
100%
Task Description

I added a link to a short video showing the issue.

In that case I set the `X Scale` property to `0.5`. When reopening the file after saving it, that property turned back to `1`. Other values (e.g. `2`) give the same result.

 2188 QCAD (main)Bug ReportLow Draw > Line > Parallel (with Distance): "Distance" inpu ...Closed
100%
Task Description

When user activated LIne → Parallel (LP), there’s two input fields - Distance and Number. Keyboard shortcut Alt-N activated Number input field very well, but shortcut Alt-D activate menu Draw instead. So user forced to point Distance input field by mouse.

That’ because conflicting letter D.

Make a letter as shortcut (Distance) will remove problem b’coz no menu or option assigned to Alt-A combination

 2196 QCAD (main)Bug ReportLow Leader: Arrow removed on load if arrow only fits first  ...Closed
100%
1 Task Description

Andrew,
This is bugging me for over a year now.
I filed it as a feature request as it is dismissed twice as a possible bug on the forum.
In both cases the advice is to only use Specific Scale 0 for Leaders.
(... and adapt all other dimensions to that)

I am aware that an arrow head has to fit twice on the first leg of a Leader Entity.

The size is set global in the Drawing Preferences under Dimension Settings: ‘Text Height’.
Under Dimension Settings, there is also a global ‘Size scale factor’.
And every dimension entity has a Specific Property called ‘Scale’ that supersedes this global ‘Size scale factor’.

Proof of concept: Dim size 5 and for any regular dimension.
1) Size scale factor 1, Specific Scale 0 » text height & arrow length = 5 units.
2) Size scale factor 2, Specific Scale 0 » text height & arrow length = 10 units.
3) Size scale factor 2, Specific Scale 1 » text height & arrow length = 5 units.
4) Size scale factor 1, Specific Scale 2 » text height & arrow length = 10 units.
5) Size scale factor 10, Specific Scale 0.5 » text height & arrow length = 2.5 units.
6) Size scale factor 99, Specific Scale 0.1 » text height & arrow length = 0.5 units.
→ Obvious is that the ‘Specific Scale’ supersedes the dimensions ‘Size scale factor’.

Those two last Leader arrows (2.5 & 0.5 long) would definitely fit twice on an 8 units long first Leader leg! And they do perfectly while drawing them.

However, the arrow will be reset when the file is saved & loaded.

For case 5 the first leg has to be (2 times 5×10) 100 units or over so an arrow 2.5 long remains on save (=40 times). In the absurd case 6 that would be (2 times 5×99) 990 units or over for an arrow only 0.5 units long (=1980 times).
Verfied and true.

It seems that on save/load:
The Specific Scale is not taken into consideration while evaluating ‘At least twice’.

Apart from that they render fine when first drew.
And reappear when setting the arrow back on again after load.

Regards,
CVH

 2197 QCAD (main)Feature RequestLow Selection Filter: add properties Length and Area Closed
100%
1 Task Description

It would be nice if we could use the length of a polyline as a search criterion too.

Selection Filter, Property for Polyline, “Length” Comparison: same like Line?

Thanks. ;-)

 2199 QCAD (main)Bug ReportLow Polyline with segment widths: duplicate rendering as bl ...Closed
100%
Task Description

Block contains a polyline with customized width

Works flawless with 3.25.0

Reported by claudioarch
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8205

 2201 QCAD (main)Bug ReportLow Purge blocks while editing block in place removes block ...Closed
100%
Task Description

I was editing a block using the “Edit block in-place” and then (because I was exploring QCad a little) tried the “Purge unused blocks” option. I suspect that the purge removed the block I was editing, since when I now click “Save and close”, I get “Original block not found”. Also when I click “Cancel”, I get “Original block reference data not found”.

Recreating an empty block with the same name fixes this, and “Save and close” seems to work as expected again.

This is probably very much a corner case which is not really important, but I wanted to report it just so it is known.

 2203 QCAD (main)Bug ReportLow Ruler: not all labels shown Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8237

 2204 QCAD (main)Bug ReportLow Modify > Break out Manual: point order matters with ope ...Closed
100%
Task Description

QCAD Professional
Win7 32bit wininstaller
Version: 3.25.2.13 (3.25.2.13)
Internet: QCAD.org
Build Date: Feb 12 2021
Revision: cad2d36
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Andrew,

Break out Manual (B2) on Arc and open Polyline results
seems to depend on the breakpoint picking order.

A segment is broken out when the picking order is in the entity orientation.
The intended behavior.

That differs when the picking order is opposite the entity orientation.
One would expect that the picking order matters when removing
a segment between the picked points.

Example file included

Noticed while merging code to PolyLineBreakSymbol.js
https://github.com/qcad/qcad/blob/master/scripts/Misc/MiscDraw/PolyLineBreakSymbol/PolyLineBreakSymbol.js Line 300-312 orders cut points on distance from start.
Otherwise, the results where inconsistent.

Regards,
CVH

 2206 QCAD (main)Bug ReportLow View > Selection Filter: Polyline area selection not wo ...Closed
100%
Task Description

see https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8227&sid=6a935d92bc5b141f951f9489fd57a76d

 2207 QCAD (main)Bug ReportLow File > SVG Export: dimension labels invisible with TTF  ...Closed
100%
Task Description

See also:
https://qcad.org/rsforum/viewtopic.php?f=33&t=6493

 2208 QCAD (main)Bug ReportLow Snap: Cannot snap to block arrays Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8251

 2209 QCAD (main)Bug ReportLow Modify > Explode: incorrect results with almost circula ...Closed
100%
Task Description

Circular ellipse arcs are exploded correctly, however, almost circular ellipse arcs are not.
Tolerance issue.

 2210 QCAD (main)Bug ReportLow Modify > Break out Manual: unexpected results with arc Closed
100%
Task Description

See also:
https://www.qcad.org/bugtracker/index.php?do=details&task_id=2204

 2211 QCAD (main)Bug ReportLow Snapping broken if block is mirrored. Closed
100%
Task Description

Using block library and inserting a block automatic snapping is broken id the block is mirrored.

Attached is one of the blocks causing the error and a screengrab.

Tried this on another machine with 2.6.2 with same bug

 2214 QCAD (main)Bug ReportLow Rectangle area selection fails because Block reference  ...Closed
100%
Task Description

A block selection in Model_Space with the rectangle area selection tool fails because the block reference is located at an unexpected location. If I catch by accident the reference point or do a simple mouse click selection it will work.

 2215 QCAD (main)Bug ReportLow Rectangle area selection fails partly at Ordinate dim's Closed
100%
Task Description

Rectangle area selection doesn’t work on ALL Ordinate dim’s.

Related to?
https://www.qcad.org/bugtracker/index.php?do=details&task_id=2214

 2217 QCAD (main)Bug ReportLow Text: spacing problem when switching to CAD font (\F) Closed
100%
Task Description

Switching CAD font creates wrong space to previous text block.

Example:

A\FStandard|c0;B

Space is too large for small texts, too small for large texts (does not scale with text height).

First reported at:
https://qcad.org/rsforum/viewtopic.php?f=33&t=8289

 2220 QCAD (main)Bug ReportLow (CU) Convert Drawing Unit (inch, mm etc) to None fails Closed
100%
Task Description

(CU) Convert Drawing Unit (inch, mm etc) to none fails with the message “Warning, Unit “None” selected. Nothing to be done”.
In the same drawing I can change the Drawing Unit below “Drawing preferences/ Drawing Unit” to None without any problems.

 2221 QCAD (main)Bug ReportLow Unpredictable linetype pattern scale for polylines usin ...Closed
100%
Task Description

When scaling linetypes the scale will change to proper size, after selecting the line again the line reverts to solid (or improper scale). Select the line a third time returns to proper scale.It appears the linetype scale is not functioning properly in 3.26.1.I have attached example files of the issue in both the 3.25.2 pro version (work correctly) and 3.26.1 pro (does not work properly) as well as the linetype file I created.

Also see the forum post:
https://www.ribbonsoft.com/rsforum/viewtopic.php?f=33&t=8329&sid=81596c5817d508fed9370f5fccc561bd

 2222 QCAD (main)Bug ReportLow Block attribute definition: default text displayed inst ...Closed
100%
Task Description

See also:
https://qcad.org/rsforum/viewtopic.php?f=33&t=8334

 2224 QCAD (main)Bug ReportLow Command line tools: -block argument does not accept lay ...Closed
100%
Task Description

The -block argument should allow layout names instead of block names (which are not persistent for layout blocks).

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8347

 2228 QCAD (main)Bug ReportLow Invalid Symbol Table name. Closed
100%
Task Description

During saving file I’m getting information “Invalid Symbol Table name error”. Problem is already known so i tried to follow the instructions given to other users by you. I’ve tried to change spaces to _ symbol in the layers names or deleting polish specific letters but there was no change. I was able to find out that the problem is related only to four layers named: A_ciany... When I delete these layers I’m able to save file without error message. Can you tell me what’s wrong in these layers? I’ve tried to change names of these layers but problem still exists. Best regards.

 2230 QCAD (main)Bug ReportLow Dimension: CAD font label displayed with wrong lineweig ...Closed
100%
Task Description

Application Preferences:
Edit > Application Preferences > Graphics View > Text Rendering: Render text as paths

Drawing Preferences:
Edit > Drawing Preferences > Dimensions > Dimension Settings > Label font: Standard (or other CAD font)
Edit > Drawing Preferences > Dimensions > Dimension Settings > Label color: By Layer (or fixed color)

 2232 QCAD/CAMBug ReportLow Nesting fails when parts fit plus minus null on sheets Closed
100%
Task Description

Just lost a detailed report (token?)- now a short version!

Nesting fails when parts fit plus minus null on sheets. My parts should fit regarding to the measurements on a sheet multiple times. The nesting tool can’t find a solution.

Options are:
Quantity multiplier: 0
Rotation: 4
Sheet margin: 0
Margin: 0
Tolerance: 0

If I modify the parts and make them slightly smaller then a nesting is done as expected. Did I miss something?

 2234 QCAD/CAMBug ReportLow CAM > Nesting: Cancel button not working Closed
100%
Task Description

Clicking cancel button only hides dialog but does not stop nesting. Escape key works as expected.

 2235 QCAD (main)Bug ReportLow Invalid symbol table name Closed
100%
Task Description

Hello,

I have got a dwg file from architect, which I can open, but I get “Invalid symbol table name” when I try to save it. I do not know which software was used to create it.
I have tried to change all spaces and national characteds in block and layers names as advised elswhere, but that didn’t help.

Lp
Tomaž

 2236 QCAD (main)Bug ReportLow Draw > Text: unreadable black text in text dialog (macO ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=8&t=8383

 2237 QCAD (main)Bug ReportLow Dimension error of angled line. Closed
100%
Task Description

When dimensioning this particular line in this position I get an Aligned Dimension of 868.6059. Offsetting this line from its original position I get the correct dimension of 19.0320, as shown in my GIF file. All other dimension in the drawing are correct. So what have I not set up or realised. I have moved the drawing to another area of the drawing and still get the same result.
Regards.
Firstime.

 2238 QCAD (main)Bug ReportLow Projection: exception when projecting polyline with sin ...Closed
100%
Task Description

1. Create polyline with one single arc segment
2. Project (Modify > Projection > Isometric Projection, dwgmapconvert, etc.)

Yields:

TypeError: Result of expression 'ret[0].countSegments' [undefined] is not a function
 2239 QCAD (main)Bug ReportLow Snap > Coordinate: Confirm coordinate with number block ...Closed
100%
Task Description

Feature request? Bug? I don’t know ... ;-)

NumBlock Enter key is not accepted by “Coordinate” tool to confirm the settings in the option bar (green Arrow icon). Enter key on main keyboard works.

Very confusing when you are used to type in all numbers with the NumBlock (what is very fast) but to confirm you have to use the “far away” Enter on the Main keyboard ... ;-)

 2240 QCAD (main)Bug ReportLow Block Attributes not showing on "Specific Properties" o ...Closed
100%
1 Task Description

I just updated my QCAD to 3.26.2.0 (3.26.2) version and lost the hability to edit block attributes of my sheet or in any other block.

I tried to save as the drawing and the problem persists.

When I open the block, the attribute is there and is all set in the Specific Properties, but when I exit to the Model Space to edit the Attribute text, the created attributes don’t appear on Specific Properties tab.

The use of block attributes in sheets, balloon or any block that contains text is very necessary.

 2241 QCAD/CAMBug ReportLow CAM Simulation: stops working after closing a file Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=8449

 2243 QCAD (main)Bug ReportLow Graphics View: rendering of splines with line pattern Closed
100%
Task Description

Line patterns on splines are rendered segment by segment instead of per whole spline.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8458

Showing tasks 2101 - 2150 of 2280 Page 43 of 46<<First - 41 - 42 - 43 - 44 - 45 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing