1. Select line and arc
2. Set selection filter in property editor to ‘lines’
3. Selection filter combo no longer contains choice for ‘arcs’.

property editor: shift - left / right arrow to select in line edit broken (hot key for next / prev tab)

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4320

- Create block
- Add attribute with tag “MY_ATTR” - Create block reference

- Select block reference
- Block attribute of block reference shown as “ATTR”

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5544

I was editing a block using the “Edit block in-place” and then (because I was exploring QCad a little) tried the “Purge unused blocks” option. I suspect that the purge removed the block I was editing, since when I now click “Save and close”, I get “Original block not found”. Also when I click “Cancel”, I get “Original block reference data not found”.

Recreating an empty block with the same name fixes this, and “Save and close” seems to work as expected again.

This is probably very much a corner case which is not really important, but I wanted to report it just so it is known.

Put the asterisk in tab title of modified files in front of the name, so it can be seen, when there are so many tabs, that the names will be truncated.

Hi Andrew,

I have added a PWM Laser post processor.

You can add it to QCAD’s post processor directory

Affects drawings in inch with hatch patterns ISO03W100 and ISO03W100A

Fix QCAD 2 example drawings:

1. dimension labels with tolerances
2. hatch pattern scale

Intersection between ellipses are not all detected.

This makes difficult difficult to make the projection as the example I give, where part of ellipses are to be removed betwwen intersection ponts.

In the website → http://www.qcad.org/qcad3.html
lacks compatibility with Leopard 10.5.8 PPC. I chose QCAD for this ...

Not a major thing in fact, but there is an error in the logo of QCad3.
Surrounded in red in the jpg.

Change the user manual directory / file names from ‘simpletextviewer’ to
‘qcad_user_manual’ and adjust the sources accordingly that the manual can be shown
in the help menu.

We can simply drop the contents of the manual that is checked in and replace
it with a simple note “No manual is available yet for this technology preview of QCAD 3”

QCad 3.0 RC2 on a Mac Leopard 10.5 (MacBook). Everything seems to work OK, but the lower left corner status bar text is in an incredibly tiny font, basically unusable. Same version of QCad on the Bootcamp/XP side of the MacBook is readable.

But I can’t find a preferences setting on either for the font size. On the old version it’s easy to find, but I think it got left out somehow on 3.0.

Had to re-install XUbuntu, now 13.04 64 bit instead of 12.04 32 bit. Now qcad 3.0.0 professional isn’t working any more (bash won’t execute qcad-bin), even after fresh re-install. I tried qcad-3.0.0-prof-linux-alt-x86.tar.gz and qcad-3.0.0-prof-linux-x86.tar.gz downloaded 20.07.2012 (I can not download anything and can not get updates because payment is more than 12 months ago).

XP32/ QCAD 3.0.5

The 3.0.5 Version is very instable - crashes many times in an hour

Problem signatur:
AppName: qcad.exe AppVer: 0.0.0.0 ModName: qcad.exe
ModVer: 0.0.0.0 Offset: 00de468d

XP32/ QCAD 3.0.6

The 3.0.6 Version (Snapshot) is very instable - crashed always after a couple minutes ...

Problem signatur:
AppName: qcad.exe AppVer: 0.0.0.0 ModName: qtcore4.dll
ModVer: 4.7.4.0 Offset: 0005d1e8

QCAD 3.21.2 x86_64 Linux crashes if I try to select any entity of the attached file. The qt4 legacy version is working fine.

Here’s the output in the console:

Qcad alters color of adjacent text, if certain unicode characters are used.

Version:
3.28.2.0 (3.28.2)
Internet:
QCAD.org
Build Date:
Aug 30 2023
Revision:
a8039fc
Qt Version:
5.13.2
Architecture:
x86_64
Compiler:
MSVC++ 14.0 (2015)

Flytracker appears to have the same problem, as this report was rejected when I inserted the same characters into the title. Query {SELECT tag_id FROM `flyspray_list_tag` WHERE (project_id=0 OR project_id=?) AND tag_name LIKE ? ORDER BY project_id} with params {1,} Failed! (Illegal mix of collations (utf8_unicode_ci,IMPLICIT) and (utf8mb4_general_ci,COERCIBLE) for operation ‘like’)

Hello!

intensive work in QCAD 3.4.7 pro leads to crash it after 30-40 minutes.

Console output (OS Debian jessie):

Could not allocate register file: 12
./qcad: line 18: 6266 Segmentation fault LD_LIBRARY_PATH=”$DIR” “$binary” -style plastique “$@”

Sir, I have downloaded the windows version as well as the ubuntu version. but unable to run the qcad 3. TP1 either in windows Xp sp-2 and in Ubuntu 10.04.

In windows xp sp-2, i have unzipped the file to D:\qcad-3.0.0-tp1-prof-win32 and on running the qcad exe file it complains, “This application has failed to start because, MSVCR100D.dll was not found reinstalling the application may fix the problem” pl. let me know how to install the dll and to get the qcad running breeze.

by
rasheed

QCad Book

Would be nice to have the index linked (like Bookmarks, Hyperlinks, Jump marks) with the regarding chapter.

So that I just can click in the index what I’m looking for and it jumps directly to the correct chapter.

Missing file Qt5XmlPatterns.dll in Windows 64bit release.

The QCAD Community Edition isn’t able to read / import dxf files with a German “Umlaut” like ä,ö, ü in the dxf file name.
If I change the file name from a “ä” into a “ae” QCAD CE will open the file flawless.

When multiple superscripts or subscripts are used in a text field, re-opening the saved dxf file will fail to render all but the first super/subscript element. As per attached example. Bug occurs on all Mac OS X from Mavericks onward.

Minimal reproducible steps:
1. Open new document in QCAD
2. Add a text object
3. Make part of the text sub or super-script
4. Make another part of the text also sub/superscript, with at least one ‘normal’ character between the two sub/superscripts
5. Save file and close it. Don’t have to quit QCAD.
6. Reopen the file. Voila, all but the first sub/superscript element is broken.

Dan.

ps. QCAD is a pretty great piece of software, nice work all.

Community version (still on FBSD only), so dxflib. I suspect the culprit is dxflib.

I have created layers and blocks and whatnot with (hungarian) accented characters in their names.
Apparently (according to the Internet, as evidenced probably most glaringly by usa.autodesk.com /adsk/servlet/ps/dl/item?siteID=123112&id=7586582&linkID=9240617) the R15 DXF version assumes single-byte character sets being used. Quick grepping the DXF2000 mentions “String (255-character maximum; less for Unicode strings)” (Group Code Value types), so it may be a false track...

Anyway, the DXF file written does have strings converted to single-byte encoding, but it seems it’s always ANSI-1252. When the output encoder encounters a character that is not representable in this one, it will use a literal question mark.

Actual case, I have a block with the name

106 egypólusú váltókapcsoló jelzőfénnyel

Of this, “ő” (U+0151) is not representable in ANSI-1252, so what gets written to the dxf is (non-ASCII shown in hex)

106 egyp<f3>lus<fa> v<e1>lt<f3>kapcsol<f3> jelz?f<e9>nnyel

Note the literal question mark.

Now the problem is this is an irreversible operation but the result is perfectly valid ANSI-1252, so upon opening the file again, I will get a block named

106 egypólusú váltókapcsoló jelz?fénnyel

IMHO the ideal resolution is to

1. Have a preference for the export code page (and use it, too, circumstances permitting)
2. Iff this is not set (or set to a default “Use system locale to determine” or something), use a look-up table to take a good guess (like old QCAD2 qcadlib/src/engine/rs_system.cpp:QCString RS_System::localeToISO())
3. If the output encoder encounters a character that is not representable in the target code page, throw an error with an option to ignore the error (and keep using question marks, but then this must have been acknowledged by the user so not silent problem anymore), pick a new output code page, whatever else

This all assuming the R15 doesn’t actually depends hardly on ANSI-1252 and ANSI-1252 only. In that case, option #3 would still be nice.

Most Western European languages (and English) are not affected by this as ANSI-1252 has most of them covered, but a little to the east, a little to the south, a little to the north, and it does make a bit of a difference :)

See forum thread at:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2833

See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2595

QCAD Community, built from Git HEAD (bf30371), Linux (Ubuntu 18.04 x64), Qt 5.10.1, fresh build on a completely clean, new checkout.

Warning:  QApplication: invalid style override passed, ignoring it.
17:00:05: Debug:    RDxfPlugin::init
17:00:05: Debug:    RScriptsPlugin::init
Warning:  Cannot load translation: "qtbase_en"
Warning:  Cannot load translation: "qt_en"
Warning:  Cannot load translation: "assistant_en"
Warning:  Cannot load translation: "qt_help_en"
Warning:  Qt WebEngine seems to be initialized from a plugin. Please set Qt::AA_ShareOpenGLContexts using QCoreApplication::setAttribute before constructing QGuiApplication.
Warning:  action not found: "Scheme"
Warning:  RScriptHandlerEcma::eval: script engine exception:  "TypeError: Result of expression 'global[defaultActionClass].init' [undefined] is not a function."
Warning:  "<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:522\n<anonymous>(documentInterface = RDocumentInterface(0x55651e9299c0)) at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:472\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:251\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:794\n<global>() at scripts/autostart.js:832"
Warning:  RScriptHandlerEcma::eval: script engine exception:  "TypeError: Result of expression 'global[defaultActionClass].init' [undefined] is not a function."
Warning:  "<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:522\n<anonymous>(documentInterface = RDocumentInterface(0x55651e9299c0)) at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:472\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:251\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:794\n<global>() at scripts/autostart.js:832"
Warning:  At least one uncaught exception:
Warning:  "<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:522\n<anonymous>(documentInterface = RDocumentInterface(0x55651e9299c0)) at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:472\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:251\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:794\n<global>() at scripts/autostart.js:832"
17:00:07: Debug:    "<global>() at 522"

My best guess is this was introduced sometime during last week or thereabouts (i.e. before that, Git HEAD used to work fine).

I have tried to use QCAD on arch linux and installed the latest version via

pacman -S qcad

Steps to reproduce the bug:

• create a rectangular box and 2 lines (See attached *.dxf file)
• mirror those 2 lines to the opposite side
• qcad crashes on save

i also added a coredump file from the crash if it does help to locate the problem..

kind regards,
stif

application crashes as soon as I try to save or save as a drawing - Windows 10

Version :
3.12.6.0 (3.12.6)
Internet :
QCAD.org
Date de fabrication :
Jan 28 2016
Révision :
664eeb0
Qt Version :
5.5.1
Architecture :
x86_64
Compiler :
MSVC++ 12.0 (2013)

Have tried several samples from the web and the result is the same.

Here is the event log entry:
Faulting application name: qcad.exe, version: 3.20.0.0, time stamp: 0x5ad07892
Faulting module name: MSVCR120.dll, version: 12.0.21005.1, time stamp: 0x524f83ff
Exception code: 0xc0000409
Fault offset: 0x000000000006dd27
Faulting process id: 0x34d0
Faulting application start time: 0x01d3dbdf73dc50d2
Faulting application path: C:\Program Files\QCAD\qcad.exe
Faulting module path: C:\Program Files\QCAD\MSVCR120.dll
Report Id: 0644b1d2-d503-4525-ab02-fc36f87288a0
Faulting package full name:
Faulting package-relative application ID:

2016 I Mac running Mac OS X Sierra Ver 10.12.5
Program crashes when I use the “Check for QCad Pro updates” in the “Help” menu
Therefor I cannot update to latest version

QCAD Data
Version:
3.16.5.0 (3.16.5)
Internet:
QCAD.org
Build Date:
Feb 6 2017
Revision:
62420f4
Qt Version:
5.8.0
Architecture:
x86_64
Compiler:
Clang 8.0.0

Please see this downstream bug report: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=265989

Hello!
I tried to save attached file (file in R15 dxf format) to any other formats and I got a crash of QCAD 3.4.5 with the next log:

Debug:    RCamScriptsPlugin: init 
Debug:    RDwgPlugin::init: trial 
Debug:    RDxfPlugin::init 
Debug:    RHelpPlugin::init 
Debug:    RProScriptsPlugin::init 
Debug:    TIMER:  56 ms -  "loading add-ons" 
Debug:    TIMER:  617 ms -  "initializing add-ons" 
Debug:    checking for updates... 
Warning:  QSslSocket: cannot resolve SSLv2_client_method
Warning:  QSslSocket: cannot resolve SSLv2_server_method
Debug:    no updates available 
Debug:    checking for updates... 
Debug:    no updates available 
Warning:  KGlobal::locale(): Warning your global KLocale is being recreated with a valid main component instead of a fake component, this usually means you tried to call i18n related functions before your main component was created. You should not do that since it most likely will not work
Warning:  Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Warning:  Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Debug:    "/org/freedesktop/UDisks2/drives/ST31000340AS_5QJ0WQPV" : property "Drive" does not exist 
Debug:    "/org/freedesktop/UDisks2/drives/ST1000DM003_1CH162_Z1D36FHL" : property "Drive" does not exist 
Debug:    "/org/freedesktop/UDisks2/drives/ST1000DM003_1CH162_Z1D36FHL" : property "DeviceNumber" does not exist 
Debug:    "/org/freedesktop/UDisks2/drives/ST1000DM003_1CH162_Z1D36FHL" : property "Device" does not exist 
Debug:    "/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist 
Debug:    "/" : property "DeviceNumber" does not exist 
Debug:    "/" : property "Device" does not exist 
Debug:    "/" : property "MediaCompatibility" does not exist 
Debug:    "/" : property "MediaRemovable" does not exist 
Debug:    "/" : property "Removable" does not exist 
Debug:    "/" : property "ConnectionBus" does not exist 
Debug:    code page:  30 
Debug:    RDxfExporter::exportFile 
Debug:    RDxfExporter::exportFile: header 
Debug:    RDxfExporter::exportFile: variables 
Debug:    RDxfExporter::exportFile: tables 
Debug:    RDxfExporter::exportFile: vport 
Debug:    RDxfExporter::exportFile: linetypes 
Debug:    RDxfExporter::exportFile: linetypes table 
Debug:    RDxfExporter::exportFile: linetypes loop 
Debug:    RDxfExporter::exportFile: linetypes table end 
Debug:    RDxfExporter::exportFile: layers 
Debug:    RS_FilterDxf::writeLayer:  "0" 
Debug:    writing styles... 
Debug:    writing views... 
Debug:    writing ucs... 
Debug:    writing appid... 
Debug:    writing dim styles... 
Debug:    writing block records... 
Debug:    writing block record:  "_____ _3 _________ _______" 
Debug:    writing block record:  "*Model_Space" 
Debug:    writing end of section TABLES... 
Debug:    writing blocks... 
Debug:    writing block:  "_____ _3 _________ _______" 
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 24, document: "0xa59ee48", address: "0xd779d30", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  0 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 5, 0) - RVector(8, 90, 0)) )  ) , startPoint: RVector(8, 5, 0), endPoint: RVector(8, 90, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 25, document: "0xa59ee48", address: "0xa2965f0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  1 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 90, 0) - RVector(20, 90, 0)) )  ) , startPoint: RVector(8, 90, 0), endPoint: RVector(20, 90, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 26, document: "0xa59ee48", address: "0xd5ef410", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  2 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 65, 0) - RVector(20, 65, 0)) )  ) , startPoint: RVector(8, 65, 0), endPoint: RVector(20, 65, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 27, document: "0xa59ee48", address: "0xd7784f0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  3 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 30, 0) - RVector(20, 30, 0)) )  ) , startPoint: RVector(8, 30, 0), endPoint: RVector(20, 30, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 28, document: "0xa59ee48", address: "0xd2c3250", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  4 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(13, 5, 0) - RVector(13, 90, 0)) )  ) , startPoint: RVector(13, 90, 0), endPoint: RVector(13, 5, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 29, document: "0xa59ee48", address: "0xa575df8", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  5 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(405, 13, 0) - RVector(415, 13, 0)) )  ) , startPoint: RVector(405, 13, 0), endPoint: RVector(415, 13, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 30, document: "0xa59ee48", address: "0xd37d0e8", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  6 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(405, 5, 0) - RVector(405, 20, 0)) )  ) , startPoint: RVector(405, 20, 0), endPoint: RVector(405, 5, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 31, document: "0xa59ee48", address: "0xc83cbb0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  7 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(285, 5, 0) - RVector(285, 20, 0)) )  ) , startPoint: RVector(285, 5, 0), endPoint: RVector(285, 20, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 32, document: "0xa59ee48", address: "0xa6f90f8", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  8 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(270, 5, 0) - RVector(270, 20, 0)) )  ) , startPoint: RVector(270, 5, 0), endPoint: RVector(270, 20, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 33, document: "0xa59ee48", address: "0xd67d868", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  9 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(260, 5, 0) - RVector(260, 20, 0)) )  ) , startPoint: RVector(260, 5, 0), endPoint: RVector(260, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 34, document: "0xa59ee48", address: "0xd984548", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  10 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(9.25, 7.88608, 0) - RVector(11.7998, 27.1139, 0)) )  ) , alignmentPoint: RVector(11.75, 17.5, 0), position: RVector(11.75, 9.36111, 0), text: "Инв. № подл.", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 35, document: "0xa59ee48", address: "0xd9b1250", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  11 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(250, 5, 0) - RVector(250, 20, 0)) )  ) , startPoint: RVector(250, 5, 0), endPoint: RVector(250, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 36, document: "0xa59ee48", address: "0xa97f870", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  12 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(9.25, 37.5675, 0) - RVector(11.7998, 57.4325, 0)) )  ) , alignmentPoint: RVector(11.75, 47.5, 0), position: RVector(11.75, 39.0556, 0), text: "Подп. и дата", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 37, document: "0xa59ee48", address: "0xd9b1250", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  13 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(240, 5, 0) - RVector(240, 20, 0)) )  ) , startPoint: RVector(240, 5, 0), endPoint: RVector(240, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 38, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  14 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(9.25, 67.82, 0) - RVector(11.7998, 87.18, 0)) )  ) , alignmentPoint: RVector(11.75, 77.5, 0), position: RVector(11.75, 69.2222, 0), text: "Взам. инв. №", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RPolylineEntity(REntity(RObject(id: 39, document: "0xa59ee48", address: "0x9a13980", undone: 0), type: 7, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  15 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(20, 292, 0) - RVector(415, 292, 0)) ,  RBox(RVector(20, 5, 0) - RVector(20, 292, 0)) ,  RBox(RVector(20, 5, 0) - RVector(415, 5, 0)) ,  RBox(RVector(415, 5, 0) - RVector(415, 292, 0)) )  ) RPolyline(RShape(address: "0x9a139d0"), vertices: 4, closed: true, 
RLine(RShape(address: "0x9a03c58"), startPoint: RVector(415, 292, 0), endPoint: RVector(20, 292, 0)), 
RLine(RShape(address: "0xd774b80"), startPoint: RVector(20, 292, 0), endPoint: RVector(20, 5, 0)), 
RLine(RShape(address: "0xd987298"), startPoint: RVector(20, 5, 0), endPoint: RVector(415, 5, 0)), 
RLine(RShape(address: "0xa2d31b0"), startPoint: RVector(415, 5, 0), endPoint: RVector(415, 292, 0)), ))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 40, document: "0xa59ee48", address: "0xd9b1250", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  16 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 5, 0) - RVector(20, 5, 0)) )  ) , startPoint: RVector(8, 5, 0), endPoint: RVector(20, 5, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 41, document: "0xa59ee48", address: "0xd9b1250", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  25 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  17 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(230, 15, 0) - RVector(295, 15, 0)) )  ) , startPoint: RVector(295, 15, 0), endPoint: RVector(230, 15, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 42, document: "0xa59ee48", address: "0xd9b1250", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  18 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(230, 10, 0) - RVector(295, 10, 0)) )  ) , startPoint: RVector(295, 10, 0), endPoint: RVector(230, 10, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 43, document: "0xa59ee48", address: "0xa97f870", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  19 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(231, 5.85618, 0) - RVector(236, 8.1, 0)) )  ) , alignmentPoint: RVector(231, 7, 0), position: RVector(228.472, 7, 0), text: "Изм.", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RPolylineEntity(REntity(RObject(id: 44, document: "0xa59ee48", address: "0xa98c480", undone: 0), type: 7, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  20 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(0, 0, 0) - RVector(420, 0, 0)) ,  RBox(RVector(420, 0, 0) - RVector(420, 297, 0)) ,  RBox(RVector(0, 297, 0) - RVector(420, 297, 0)) ,  RBox(RVector(0, 0, 0) - RVector(0, 297, 0)) )  ) RPolyline(RShape(address: "0xa98c4d0"), vertices: 4, closed: true, 
RLine(RShape(address: "0xd774b80"), startPoint: RVector(0, 0, 0), endPoint: RVector(420, 0, 0)), 
RLine(RShape(address: "0x9a03c58"), startPoint: RVector(420, 0, 0), endPoint: RVector(420, 297, 0)), 
RLine(RShape(address: "0x9be2218"), startPoint: RVector(420, 297, 0), endPoint: RVector(0, 297, 0)), 
RLine(RShape(address: "0x9c0c3e0"), startPoint: RVector(0, 297, 0), endPoint: RVector(0, 0, 0)), ))
Debug:    RDxfExporter::writeEntity:  RPolylineEntity(REntity(RObject(id: 45, document: "0xa59ee48", address: "0x9a0ea88", undone: 0), type: 7, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  21 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(230, 5, 0) - RVector(230, 20, 0)) ,  RBox(RVector(230, 20, 0) - RVector(415, 20, 0)) )  ) RPolyline(RShape(address: "0x9a0ead8"), vertices: 3, closed: false, 
RLine(RShape(address: "0xd774b80"), startPoint: RVector(230, 5, 0), endPoint: RVector(230, 20, 0)), 
RLine(RShape(address: "0x9a03c58"), startPoint: RVector(230, 20, 0), endPoint: RVector(415, 20, 0)), ))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 46, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  22 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(241, 5.24, 0) - RVector(249.534, 8.1, 0)) )  ) , alignmentPoint: RVector(241, 7, 0), position: RVector(236.639, 7, 0), text: "Кол.уч.", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 47, document: "0xa59ee48", address: "0xa97f870", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  23 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(251.956, 5.9, 0) - RVector(258.044, 8.1, 0)) )  ) , alignmentPoint: RVector(255, 7, 0), position: RVector(251.944, 7, 0), text: "Лист", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 48, document: "0xa59ee48", address: "0xd9b1250", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  24 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(295, 5, 0) - RVector(295, 20, 0)) )  ) , startPoint: RVector(295, 5, 0), endPoint: RVector(295, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 49, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  25 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(260.677, 5.85618, 0) - RVector(269.323, 8.1, 0)) )  ) , alignmentPoint: RVector(265, 7, 0), position: RVector(260.861, 7, 0), text: "№ док.", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 50, document: "0xa59ee48", address: "0xa97f870", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  26 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(272.414, 5.90284, 0) - RVector(282.565, 8.14667, 0)) )  ) , alignmentPoint: RVector(277.49, 7.04667, 0), position: RVector(272.323, 7.04667, 0), text: "Подпись", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 51, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  27 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(286.669, 5.68, 0) - RVector(293.331, 8.1, 0)) )  ) , alignmentPoint: RVector(290, 7, 0), position: RVector(286.556, 7, 0), text: "Дата", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 52, document: "0xa59ee48", address: "0xa97f870", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  28 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(406.541, 14, 0) - RVector(413.459, 16.5, 0)) )  ) , alignmentPoint: RVector(410, 14, 0), position: RVector(406.944, 14, 0), text: "Лист", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    writing block:  "*Model_Space" 
Debug:    writing section ENTITIES... 
Debug:    RDxfExporter::writeEntity:  RBlockReferenceEntity(REntity(RObject(id: 54, document: "0xa59ee48", address: "0xa788310", undone: 0), type: 4, layerId: 21, blockId: 22, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  30 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(-182, -97.5, 0) - RVector(238, 199.5, 0)) )  ) , position: RVector(-182, -97.5, 0), scale: RVector(1, 1, 1), rotation: 0, referencedBlockId: 23)
Debug:    RDxfExporter::writeEntity:  RBlockReferenceEntity(REntity(RObject(id: 55, document: "0xa59ee48", address: "0xd97ffb8", undone: 0), type: 4, layerId: 21, blockId: 22, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  31 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(340, -88.5, 0) - RVector(760, 208.5, 0)) )  ) , position: RVector(340, -88.5, 0), scale: RVector(1, 1, 1), rotation: 0, referencedBlockId: 23)
Debug:    writing end of section ENTITIES... 
Debug:    writing section OBJECTS... 
Debug:    writing end of section OBJECTS... 
Debug:    writing EOF... 
Debug:    RDxfExporter::exportFile: close 
Debug:    RDxfExporter::exportFile: delete 
Debug:    RDxfExporter::exportFile: OK 
Debug:    RDxfExporter::exportFile 
Debug:    RDxfExporter::exportFile: header 
Debug:    RDxfExporter::exportFile: variables 
Debug:    RDxfExporter::exportFile: tables 
Debug:    RDxfExporter::exportFile: vport 
Debug:    RDxfExporter::exportFile: linetypes 
Debug:    RDxfExporter::exportFile: linetypes table 
Debug:    RDxfExporter::exportFile: linetypes loop 
Debug:    RDxfExporter::exportFile: linetypes table end 
Debug:    RDxfExporter::exportFile: layers 
Debug:    RS_FilterDxf::writeLayer:  "0" 
Debug:    writing styles... 
Debug:    writing views... 
Debug:    writing ucs... 
Debug:    writing appid... 
Debug:    writing dim styles... 
Debug:    writing block records... 
Debug:    writing block record:  "_____ _3 _________ _______" 
Debug:    writing block record:  "*Model_Space" 
Debug:    writing end of section TABLES... 
Debug:    writing blocks... 
Debug:    writing block:  "_____ _3 _________ _______" 
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 24, document: "0xa59ee48", address: "0xd30fef0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  0 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 5, 0) - RVector(8, 90, 0)) )  ) , startPoint: RVector(8, 5, 0), endPoint: RVector(8, 90, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 25, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  1 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 90, 0) - RVector(20, 90, 0)) )  ) , startPoint: RVector(8, 90, 0), endPoint: RVector(20, 90, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 26, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  2 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 65, 0) - RVector(20, 65, 0)) )  ) , startPoint: RVector(8, 65, 0), endPoint: RVector(20, 65, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 27, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  3 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 30, 0) - RVector(20, 30, 0)) )  ) , startPoint: RVector(8, 30, 0), endPoint: RVector(20, 30, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 28, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  4 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(13, 5, 0) - RVector(13, 90, 0)) )  ) , startPoint: RVector(13, 90, 0), endPoint: RVector(13, 5, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 29, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  5 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(405, 13, 0) - RVector(415, 13, 0)) )  ) , startPoint: RVector(405, 13, 0), endPoint: RVector(415, 13, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 30, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  6 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(405, 5, 0) - RVector(405, 20, 0)) )  ) , startPoint: RVector(405, 20, 0), endPoint: RVector(405, 5, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 31, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  7 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(285, 5, 0) - RVector(285, 20, 0)) )  ) , startPoint: RVector(285, 5, 0), endPoint: RVector(285, 20, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 32, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  8 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(270, 5, 0) - RVector(270, 20, 0)) )  ) , startPoint: RVector(270, 5, 0), endPoint: RVector(270, 20, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 33, document: "0xa59ee48", address: "0x9a131d0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  9 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(260, 5, 0) - RVector(260, 20, 0)) )  ) , startPoint: RVector(260, 5, 0), endPoint: RVector(260, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 34, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  10 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(9.25, 7.88608, 0) - RVector(11.7998, 27.1139, 0)) )  ) , alignmentPoint: RVector(11.75, 17.5, 0), position: RVector(11.75, 9.36111, 0), text: "Инв. № подл.", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 35, document: "0xa59ee48", address: "0x9c0dd40", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  11 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(250, 5, 0) - RVector(250, 20, 0)) )  ) , startPoint: RVector(250, 5, 0), endPoint: RVector(250, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 36, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  12 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(9.25, 37.5675, 0) - RVector(11.7998, 57.4325, 0)) )  ) , alignmentPoint: RVector(11.75, 47.5, 0), position: RVector(11.75, 39.0556, 0), text: "Подп. и дата", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 37, document: "0xa59ee48", address: "0x9c0dd40", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  13 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(240, 5, 0) - RVector(240, 20, 0)) )  ) , startPoint: RVector(240, 5, 0), endPoint: RVector(240, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 38, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  14 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(9.25, 67.82, 0) - RVector(11.7998, 87.18, 0)) )  ) , alignmentPoint: RVector(11.75, 77.5, 0), position: RVector(11.75, 69.2222, 0), text: "Взам. инв. №", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RPolylineEntity(REntity(RObject(id: 39, document: "0xa59ee48", address: "0xdbdade8", undone: 0), type: 7, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  15 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(20, 292, 0) - RVector(415, 292, 0)) ,  RBox(RVector(20, 5, 0) - RVector(20, 292, 0)) ,  RBox(RVector(20, 5, 0) - RVector(415, 5, 0)) ,  RBox(RVector(415, 5, 0) - RVector(415, 292, 0)) )  ) RPolyline(RShape(address: "0xdbdae38"), vertices: 4, closed: true, 
RLine(RShape(address: "0x9a0fe10"), startPoint: RVector(415, 292, 0), endPoint: RVector(20, 292, 0)), 
RLine(RShape(address: "0xd497720"), startPoint: RVector(20, 292, 0), endPoint: RVector(20, 5, 0)), 
RLine(RShape(address: "0x99fd1a8"), startPoint: RVector(20, 5, 0), endPoint: RVector(415, 5, 0)), 
RLine(RShape(address: "0x9a10628"), startPoint: RVector(415, 5, 0), endPoint: RVector(415, 292, 0)), ))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 40, document: "0xa59ee48", address: "0x9c0dd40", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  16 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(8, 5, 0) - RVector(20, 5, 0)) )  ) , startPoint: RVector(8, 5, 0), endPoint: RVector(20, 5, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 41, document: "0xa59ee48", address: "0xd3703e0", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  25 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  17 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(230, 15, 0) - RVector(295, 15, 0)) )  ) , startPoint: RVector(295, 15, 0), endPoint: RVector(230, 15, 0))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 42, document: "0xa59ee48", address: "0x9c0dd40", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  18 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(230, 10, 0) - RVector(295, 10, 0)) )  ) , startPoint: RVector(295, 10, 0), endPoint: RVector(230, 10, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 43, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  19 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(231, 5.85618, 0) - RVector(236, 8.1, 0)) )  ) , alignmentPoint: RVector(231, 7, 0), position: RVector(228.472, 7, 0), text: "Изм.", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RPolylineEntity(REntity(RObject(id: 44, document: "0xa59ee48", address: "0xdbdade8", undone: 0), type: 7, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  20 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(0, 0, 0) - RVector(420, 0, 0)) ,  RBox(RVector(420, 0, 0) - RVector(420, 297, 0)) ,  RBox(RVector(0, 297, 0) - RVector(420, 297, 0)) ,  RBox(RVector(0, 0, 0) - RVector(0, 297, 0)) )  ) RPolyline(RShape(address: "0xdbdae38"), vertices: 4, closed: true, 
RLine(RShape(address: "0x9a044c0"), startPoint: RVector(0, 0, 0), endPoint: RVector(420, 0, 0)), 
RLine(RShape(address: "0x99fd1a8"), startPoint: RVector(420, 0, 0), endPoint: RVector(420, 297, 0)), 
RLine(RShape(address: "0x9a0fe10"), startPoint: RVector(420, 297, 0), endPoint: RVector(0, 297, 0)), 
RLine(RShape(address: "0x9a10628"), startPoint: RVector(0, 297, 0), endPoint: RVector(0, 0, 0)), ))
Debug:    RDxfExporter::writeEntity:  RPolylineEntity(REntity(RObject(id: 45, document: "0xa59ee48", address: "0xdbdade8", undone: 0), type: 7, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  21 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(230, 5, 0) - RVector(230, 20, 0)) ,  RBox(RVector(230, 20, 0) - RVector(415, 20, 0)) )  ) RPolyline(RShape(address: "0xdbdae38"), vertices: 3, closed: false, 
RLine(RShape(address: "0x9a11a90"), startPoint: RVector(230, 5, 0), endPoint: RVector(230, 20, 0)), 
RLine(RShape(address: "0xa6ffd58"), startPoint: RVector(230, 20, 0), endPoint: RVector(415, 20, 0)), ))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 46, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  22 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(241, 5.24, 0) - RVector(249.534, 8.1, 0)) )  ) , alignmentPoint: RVector(241, 7, 0), position: RVector(236.639, 7, 0), text: "Кол.уч.", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 47, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  23 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(251.956, 5.9, 0) - RVector(258.044, 8.1, 0)) )  ) , alignmentPoint: RVector(255, 7, 0), position: RVector(251.944, 7, 0), text: "Лист", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RLineEntity(REntity(RObject(id: 48, document: "0xa59ee48", address: "0x9c0dd40", undone: 0), type: 6, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  60 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  24 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(295, 5, 0) - RVector(295, 20, 0)) )  ) , startPoint: RVector(295, 5, 0), endPoint: RVector(295, 20, 0))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 49, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  25 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(260.677, 5.85618, 0) - RVector(269.323, 8.1, 0)) )  ) , alignmentPoint: RVector(265, 7, 0), position: RVector(260.861, 7, 0), text: "№ док.", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 50, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  26 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(272.414, 5.90284, 0) - RVector(282.565, 8.14667, 0)) )  ) , alignmentPoint: RVector(277.49, 7.04667, 0), position: RVector(272.323, 7.04667, 0), text: "Подпись", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 51, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  27 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(286.669, 5.68, 0) - RVector(293.331, 8.1, 0)) )  ) , alignmentPoint: RVector(290, 7, 0), position: RVector(286.556, 7, 0), text: "Дата", textHeight: 2.2, textWidth: 0, drawingDirection: 1))
Debug:    RDxfExporter::writeEntity:  RTextEntity(RTextBasedEntity(REntity(RObject(id: 52, document: "0xa59ee48", address: "0xd37a508", undone: 0), type: 14, layerId: 21, blockId: 23, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  28 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(406.541, 14, 0) - RVector(413.459, 16.5, 0)) )  ) , alignmentPoint: RVector(410, 14, 0), position: RVector(406.944, 14, 0), text: "Лист", textHeight: 2.5, textWidth: 0, drawingDirection: 1))
Debug:    writing block:  "*Model_Space" 
Debug:    writing section ENTITIES... 
Debug:    RDxfExporter::writeEntity:  RBlockReferenceEntity(REntity(RObject(id: 54, document: "0xa59ee48", address: "0x9a02c98", undone: 0), type: 4, layerId: 21, blockId: 22, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  30 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(-182, -97.5, 0) - RVector(238, 199.5, 0)) )  ) , position: RVector(-182, -97.5, 0), scale: RVector(1, 1, 1), rotation: 0, referencedBlockId: 23)
Debug:    RDxfExporter::writeEntity:  RBlockReferenceEntity(REntity(RObject(id: 55, document: "0xa59ee48", address: "0x9a02c98", undone: 0), type: 4, layerId: 21, blockId: 22, parentId: -1, childIds: QSet() , lineweight:  -1 , linetypeId:  0 , color:  RColor(ByLayer) , drawOrder:  31 , selectionStatus:  false , boundingBoxes:  (RBox(RVector(340, -88.5, 0) - RVector(760, 208.5, 0)) )  ) , position: RVector(340, -88.5, 0), scale: RVector(1, 1, 1), rotation: 0, referencedBlockId: 23)
Debug:    writing end of section ENTITIES... 
Debug:    writing section OBJECTS... 
Debug:    writing end of section OBJECTS... 
Debug:    writing EOF... 
Debug:    RDxfExporter::exportFile: close 
Debug:    RDxfExporter::exportFile: delete 
Debug:    RDxfExporter::exportFile: OK 
./qcad-3.4.5-linux-x86_32/qcad: line 18: 12988 segmantation fault                   LD_LIBRARY_PATH="$DIR" "$binary" -style plastique "$@"

Andrew,

Related topic:
https://www.qcad.org/rsforum/viewtopic.php?f=8&t=10562

From the looks of it the cursor image data is read at a wider pace as it is stored.
One can distinguish the double cross positioning QCAD cursor but it is shifted.

Regards,
CVH

Hello
Qcad does not show! DWF-files. it seems, that the File is opened, but thre is nothing displayed on the screen. onl the Rastes is showed, but not the DWf-drawing.

I just downloaded QCAD and bought the doc that goes with it. Lo and behold, I find that I cannot search the doc in Preview (Acrorbat Reader too!)! So I paid extra for doc that might be argued should come with a product (although its hard to complain about the price) and then I cannot even search it electronically? There is just everything wrong with that in the year 2014! Please fix as it is extremely inefficient and time consuming to not have electronic search capability.

Since today, QCAD fails to load my drawings, with the following error message in the console:

Warning: RBlockReferenceData::getBoundingBox: maximum recursion depth reached: block: “Drukknop”

The block in question is the AREI (Belgian standard for symbols in electrical installations) symbol for a “button” light switch.
It’s a small and simple drawing (see attachment).

I’ve added a lot of these buttons in the drawing since the previous version, but there were some already present, and this never caused problems.

QCAD version: QCAD 3.4.4 Pro for Ubuntu Linux 32bit
System output: see attached file

QCAD does not manage to load an DXF file created by itself (presumably, I don’t remember excactly, could be the last 2.x version). When selecting File ⇒ Open on the file in attachment, QCAD shows a pop-up reporting the following error :

Cannot open file
»‘/home/gillonr/Documents/Projects/Familly/Br.../Chambre Parents/Plans/Plan-PaterNoster.dxf’.
» Please check your access rights, the file format and file extension.

The file permissions are OK, there is no issue of disk space on the volume where the file reside or where the QCAD distribution is installed or at any other critical location. The problem does not happen on other files created with QCAD, so it appears to be data dependent.

The file causing trouble in QCAD can be imported in LibreOffice 3.4.2 w/o reporting errors (but that application does not provide the suitable methods / tools to edit this format...).

(1) Is there a way to activate debugging when reading in data from a DXF ?
(2) Is there some tool (ev. 3rd party) allowing to check that the data is clean ?
(3) Can someone identify the cause of the problem (presumably some data construct or maybe corruption) ?
(4) In case it would turn out that the problem is a QCAD bug, is there a work-around (I need these drawings...).

indows10 QCAD3.28.2
I display different fonts in three different CAD software. QCAD displays incorrectly (text display width is incorrect). The attachment is three different CAD display effects. The red mark is where QCAD displays errors.

I have the german Version of QCAD 3.0.0.
After starting QCAD I load my current work file (an architecture one).
After loading I get two working Areas in QCAD and after a while the complete Software QCAD (only QCAD) is hanging. It is not possible to close the QCAD SW with the task Manager of Windows 7. Only to log out helps to Close or remove the running SW. The attachment Shows a Screen copy. The view is when you see through milky glasses to QCAD.

I bought this SW a few days ago and then this happened. I have spend a lot of time to generate my Project and now this.

Is there any one who knows what the Problem is?
Is that a Problem of thw QCAD SW or can be the problem my current work file (generated with QCAD on my Notebook). Note, Problem happens on my work Station. I have started to work on my Notebook, but i found out that the Screen is to small to work with QCAD. So i moved the SW to my work Station. (Both working with Windows 7) This to get more Details abou the handling and whathappens before.

Would be great to get a quick Response or better a working solution for my Problem. When you need more details please let me know.

[Edited by Admin for profanity]

QCAD 3.20.1.3 help link to “FAQ‘s (Online)” is broken and leads to a 404 page.
(Menu → Help → FAQ‘s (Online))

After installing the QCAD version 3 BETA, at QCAD launch, I get a window that pops up, QTScript Debugger, see attached screen shot.

After a while everything goes down and no QCAD apps is running.

What can help this ?

After the first time I have saved a file from QCAD to the USB stick, the USB stick becomes read only.

Highly inconvenient as one then needs to copy over the data and format it again.

Qcad Beta in Ubuntu 11.04 x64

'/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/assistant' 
/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/assistant: error while loading shared libraries: libQtHelp.so.4: cannot open shared object file: No such file or directory
gabriel@gabriel-Studio-1558:~$ '/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/qcad-trial' 
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so

/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so


(<unknown>:4849): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Loading IM context type 'ibus' failed

(<unknown>:4849): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Loading IM context type 'ibus' failed
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so

/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so


(<unknown>:4849): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): Gtk-WARNING **: Loading IM context type 'ibus' failed
application directory:  "/home/gabriel/opt/qcad-3.0.0-beta-trial-linux" 
working path:  "/home/gabriel/opt/qcad-3.0.0-beta-trial-linux" 
library path:  "/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/plugins" 
Debug:    Init script plugins... 
Debug:    TIMER:  26623 ms -  "loading and initializing plugins" 
Warning:  RScriptHandlerEcma::doScript: engine busy: aborting evaluation of script: 

 "scripts/File/NewFile/NewFile.js" 

 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    Creating storage... 
Debug:    Creating spatial index... 
Debug:    Creating document... 
Debug:    Creating MDI child... 
Debug:    Initialize Viewports... 
Debug:    Init graphics view... 
Debug:    Init scrollbars... 
Debug:    Init rulers... 
Debug:    Init idle and default actions... 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Debug:    lock failed:  "EACTION FINISH: scripts/Snap/Auto/Auto.js" 
Debug:    locker:  "NEW" 
Debug:    lock failed:  "EACTION RESUME: scripts/Idle/Reset/Reset.js" 
Debug:    locker:  "NEW" 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Debug:    lock failed:  "EACTION FINISH: scripts/Snap/RestrictOff/RestrictOff.js" 
Debug:    locker:  "NEW" 
Debug:    lock failed:  "EACTION RESUME: scripts/Idle/Reset/Reset.js" 
Debug:    locker:  "NEW" 
Debug:    Show MDI child... 
Debug:    lock failed:  "RMainWindowQt::subWindowActivated" 
Debug:    locker:  "NEW" 
Debug:    Init event handler... 
Debug:    updateScenes... 
Debug:    updateGuiActions... 
Debug:    notifyListenersSlot... 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Debug:    setActiveSubwindow... 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    RDocumentInterface::deleteTerminatedActions: mutex lock failed 
/usr/lib/gio/modules/libgiobamf.so: clase ELF errónea: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgiobamf.so
/usr/lib/gio/modules/libgvfsdbus.so: clase ELF errónea: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so

(<unknown>:4849): Gtk-WARNING **: Error loading theme icon 'window-close' for stock: No se ha podido cargar el módulo de carga de imágenes: /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: clase ELF errónea: ELFCLASS64

(<unknown>:4849): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed

** (<unknown>:4849): CRITICAL **: murrine_style_draw_render_icon: assertion `base_pixbuf != NULL' failed

(<unknown>:4849): Gtk-CRITICAL **: IA__gtk_style_render_icon: assertion `pixbuf != NULL' failed

(<unknown>:4849): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_pixels: assertion `GDK_IS_PIXBUF (pixbuf)' failed

(<unknown>:4849): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_width: assertion `GDK_IS_PIXBUF (pixbuf)' failed

(<unknown>:4849): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_height: assertion `GDK_IS_PIXBUF (pixbuf)' failed
Segmentation fault