|
2519 | QCAD (main) | Bug Report | High | Fit point Splines not displaying | Closed | |
|
Task Description
If I draw a ‘control points’ spline, it draws fine. If I draw (or open a file with...) ‘fit points’ spline, then that spline type wont’ display. (see attached video)
* If I ‘select all’, then the fit points will display/highlight; however, the spline itself does not display.
|
|
889 | QCAD (main) | Feature Request | Low | Filter the current selection to only include entities o ... | Closed | |
2 |
Task Description
The property editor should do, if I change Selection: All(xx) by Filtering by Entity Type Selection: Circle(xx) only the selected enteties(in this case the circles) should be selected, so we will be able to copy, delete ... directly
Der Eigenschaften Editor sollte wenn die Auswahl: Alle(xxx) auf z.B. Auswahl: Kreise (xx) geändert wird auch nur diese Selektierung in der Zeichnung auswählen um direct kopieren, löschen ... zu können
|
|
2044 | QCAD (main) | Feature Request | Low | Filter selection entities according to more than one cr ... | Closed | |
|
Task Description
At the moment there is no way to select all entities that match more than one criterion (i.e. layers, colours, object types, ..).
|
|
434 | QCAD (main) | Bug Report | Medium | filling wrong areas | Closed | |
|
Task Description
Hi,
qcad3 shows wrong filling of areas, see attached example in qcad3rc2 (wrong) vs. qcad2 (ok).
Regards - Stefan
|
|
1067 | QCAD (main) | Feature Request | Low | Filling an area with a bitmap | Assigned | |
1 |
Task Description
Being able to fill an area with a bitmap would be a nice addition to the already impressive feature list of QCAD.
|
|
238 | QCAD (main) | Bug Report | Low | Files given on command line don't open | Closed | |
|
Task Description
Files given on command line don’t open if paths are relative (CWD problem)
|
|
2225 | QCAD (main) | Bug Report | Very Low | Filenames containing an ampersand do not render correct ... | Closed | |
|
Task Description
If a file is opened whose filename contains an ampersand, the filename will be rendered correctly in the application titlebar, but the tab bar and the Window menu will not display the ampersand.
If, however, the ‘alt’ key is pressed, the ampersand will result in an underscore appearing beneath the character immediately following it in the filename string. This applies both to the titlebar and the Window menu.
Interestingly, this can be “exploited” by a user to quickly switch between tabs by pressing ‘alt’ and the character which follows the ampersand simultaneously. Likewise, a user can swap between windows using the Window menu in a similar fashion, by first pressing Alt+W, then Alt and the same key as before.
The expected result is that the ampersand is rendered, the underscore is not rendered, and the ‘alt’ key shortcuts don’t work.
It would appear that this is a simple case of failing to properly escape the ampersand in filenames before passing the filename string to various Qt methods.
|
|
2424 | QCAD (main) | Bug Report | Low | File/Folder selection dialogs are broken under KDE | Closed | |
|
Task Description
I run KDE Plasma (KWin window manager) on Gentoo Linux.
I have tested with several different builds of QCAD 3.27.8:
If I use Open, Save As, and anything else that selects a file or a folder, the dialog does not show any contents, and the terminal prints an error:
Warning: couldn't create slave: "Unknown protocol 'file'."
Some of the dialogs behave better by deselecting: Application Prefs > File: Open/Save > File Dialog > Use system file dialog
So, looking through the code, I noticed that there is already KDE-specific handling to avoid using the system dialog, but it has probably been broken since switching to QT5, because Q_WS_X11 (and all other Q_WS_* global macros) no longer exist with QT5+.
I’ve attached a patch that fixes the usage of that macro. With that patch, in my portage-built Community Edition build, I no longer have to deselect “Use system file dialog”.
But, there are at least two places that do not respect the DontUseNativeDialogs setting:
I found the scripts source for the Library Browser PreferencesPage.ui, but I couldn’t find the same for the Templates selection, probably because that is a Pro-only feature (right?).
For the LibraryBrowser, here is the appropriate sections of code:
So, somehow this line needs to change to use the DontUseNativeDialogs setting, but I’m not sure how to do that (I don’t have much experience with QT development).
var dir = QFileDialog.getExistingDirectory(this, fileDlgTitle);
Assuming that Template Folders preference also uses the DirectoryList widget, fixing this should fix that pref pane as well.
|
|
11 | QCAD (main) | Feature Request | Low | File: SVG Export | Closed | |
|
Task Description
Open
Postponed
Global Preferences:
ExporterPG
Done
|
|
14 | QCAD (main) | Feature Request | Medium | File: Print Preview | Closed | |
|
Task Description
Open
re-enable auto fit
re-enable center
Postponed
Done
-
scale factor
position
paper size
paper orientation
toggle portrait / landscape in toolbar
choose paper format in toolbar
multiple pages with margin and stitch marks
zoom to all pages
color mode (color, gray scale, black white)
scale combo box in drawing preferences empty
|
|
13 | QCAD (main) | Feature Request | High | File: Close | Closed | |
|
Task Description
Ask if document modified
|
|
2351 | QCAD (main) | Feature Request | Low | File Thumbnail Preview | Assigned | |
1 |
Task Description
Could we please implement the ability to display file contents in the file explorer. This would make it easier to decide which files to open.
|
|
586 | QCAD (main) | Feature Request | Low | File open dialog with preview | Assigned | |
1 |
Task Description
Since this is not supported by Qt anymore, this would likely have to be implemented from scratch.
|
|
12 | QCAD (main) | Feature Request | Low | File Export Formats | Closed | |
|
Task Description
Open
Postponed
Not Planned
EMF/WMF (use SVG instead or use SVG to EMF converter)
Done
|
|
1063 | QCAD (main) | Bug Report | Low | File dialogs stopped working | Closed | |
|
Task Description
Git 4738fe, Linux/FreeBSD, Qt 4.8
Start QCAD, File→Open, nothing happens. Draw something, File→Save, nothing happens. File→Save As, nothing happens. File→Quit, it asks if unsaved changes need to be saved, click Save, the following is printed in the console:
Warning: Script Exception:
"ReferenceError: Can't find variable: qcadInitFileDialog"
Warning: "<anonymous>()@[...]/qcad/scripts/File/SaveAs/SaveAs.js:116"
Autosave does work, it creates a seemingly good DXF (only simple case tested).
|
|
234 | QCAD (main) | Bug Report | High | File completely erased/corrupted; then duplicates upon ... | Closed | |
|
Task Description
I have been working with a file in 2.2 which I then opened with beta 3. All seemed to be well for a couple of days. Today the application closed itself. When I restarted and tried to load the file it came up duplicated. One tab showed nothing, the other showed my drawing with blue lines and the tab headers (file name) were identical except that the ‘blue line’ tab had an asterisk after the file name indicating that the file had been changed. Highlighting a ‘blue line’ element showed the properties with colour white.
I’m running 64bit Ubuntu 11.04. ‘Blue line’ file attached. Any quick way to change the blue lines to default white?
|
|
2163 | QCAD (main) | Bug Report | Low | File > SVG Import: parsing path data with implicit sepa ... | Closed | |
|
Task Description
Path data might contain leading zeroes to indicate an implicit separator:
“1 02” should be equivalent with “1 0 2”, not “1 2”.
|
|
1359 | QCAD (main) | Bug Report | Low | File > SVG Import: line, circle, ellipse, rect may omit ... | Closed | |
|
Task Description
Omitted attributes of line, circle, ellipse, rect should default to 0.
|
|
2490 | QCAD (main) | Bug Report | Low | File > SVG Export: wrong line color (Qt 6) | Closed | |
|
Task Description
Some colored lines are exported as black on macOS M1 / Qt 6.
|
|
2406 | QCAD (main) | Bug Report | Low | File > SVG Export: wrong arcs in blocks with negative s ... | Closed | |
1 |
Task Description
When using SVG export on a drawing with a block defined, the export is incorrect. Arcs are drawn incorrectly and parts of the block are missing. If that block is exploded, the SVG export is correct. Attached is a block on the lower left and the same block on the lower right after explode. Also attached is the resulting SVG file. This is not always the case. Some blocks are correctly exported to SVG. The upper row is again a block on the left and the same block exploded on the right. It exports properly.
|
|
1825 | QCAD (main) | Bug Report | Low | File > Svg Export: text exported with wrong height | Closed | |
|
Task Description
If option “Preserve geometry” is activated, texts are exported at a wrong height if the drawing unit is not the same as the SVG output unit.
|
|
1718 | QCAD (main) | Bug Report | Very Low | File > SVG Export: selected entities exported in select ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5429
|
|
1973 | QCAD (main) | Bug Report | Low | File > SVG Export: polylines with large arc segments (> ... | Closed | |
|
Task Description
Create polyline from clockwise arc with total angle > 180°. Export as SVG. SVG path arc data does not export sweep correctly.
|
|
1630 | QCAD (main) | Bug Report | Low | File > SVG Export: polylines with arc segments with lar ... | Closed | |
|
Task Description
Polylines with arc segments with large radii are not exported correctly due to imprecise QPainterPath::addArc.
|
|
2022 | QCAD (main) | Bug Report | Low | File > SVG Export: polyline arc segments and hatches in ... | Closed | |
|
Task Description
Block scales are not applied to the radius of arc segments of polylines and arc boundary segments of hatches.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6854
|
|
1350 | QCAD (main) | Bug Report | Low | File > SVG Export: omitted texts | Closed | |
|
Task Description
Texts and dimension labels not exported to SVG if text rendering is set to “Render text as text”
|
|
1883 | QCAD (main) | Bug Report | Low | File > SVG Export: invalid SVG comments | Closed | |
|
Task Description
SVG / XML output is invalid if text contains “–“.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6254
|
|
1931 | QCAD (main) | Bug Report | Low | File > SVG Export: hatch arc interpolation | Closed | |
|
Task Description
Hatches with arc boundaries are exported as crude polygons.
See also: https://qcad.org/rsforum/viewtopic.php?f=33&t=6494
|
|
1987 | QCAD (main) | Bug Report | Low | File > SVG Export: full circle hatch | Closed | |
|
Task Description
Hatch of full circle (loaded from DXF) does not export to SVG.
|
|
1332 | QCAD (main) | Feature Request | Low | File > SVG Export: export DXF entity handles to SVG | Assigned | |
|
Task Description
Add handle attribute to exported SVG tags to identify exported DXF entities.
|
|
2373 | QCAD (main) | Bug Report | Low | File > SVG Export: ellipse arcs in non-uniformly transf ... | Closed | |
|
Task Description
Ellipse arcs in non-uniformly transformed blocks are exported incorrectly when the “preserve geometry” option is used.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9388
|
|
2101 | QCAD (main) | Bug Report | Low | File > SVG Export: Double hyphen in text leads to inval ... | Closed | |
|
Task Description
Double hyphens in text entities lead to double hyphens in SVG comments which is not valid.
|
|
2207 | QCAD (main) | Bug Report | Low | File > SVG Export: dimension labels invisible with TTF ... | Closed | |
|
Task Description
See also: https://qcad.org/rsforum/viewtopic.php?f=33&t=6493
|
|
2076 | QCAD (main) | Bug Report | Low | File > SVG Export: circles in mirrored blocks | Closed | |
|
Task Description
Circles in mirrored blocks are not exported or exported with negative radius (not shown in SVG).
See also: https://qcad.org/rsforum/viewtopic.php?f=33&t=7232
|
|
1450 | QCAD (main) | Bug Report | High | File > Save: Invalid Symbol Table Name | Closed | |
|
Task Description
Opens an Autocad .dwg file happily (Pro version x64). Allows you to make changes, when you go to save (or save as), you get the “Invalid symbol table name”.
It should figure this out when file is opened and squawk immediately.
Would be extremely useful to get some additional error details that might allow one to diagnose and fix the problem. i.e. “Invalid symbol table name: _” with the name of the offender.
I tried removing unused blocks, no joy.
|
|
1535 | QCAD (main) | Bug Report | Low | File > Save: image references of deleted images remain ... | Closed | |
1 |
Task Description
by inserting and deleting many figures in the drawing the references to these figures are not excluded from the dxf / dwg file structure, if you exclude a figure and include it again, the reference is duplicated, etc .. this causes an increase of the size of the files dwg / dxf.
|
|
2084 | QCAD (main) | Bug Report | Low | File > Save: Fixed extension line length of dimensions ... | Closed | |
|
Task Description
Create dimension with fixed extension line length. Set scale to 2. Save / Load or Reload.
→ Extension line length no longer fixed.
|
|
1529 | QCAD (main) | Bug Report | Low | File > Save: error if dimension text size is zero | Closed | |
|
Task Description
The error shown in the attached figure (print sreen) appears when you try to create a library item from the selection. Versions 3.15.5 and 3.16.4 on Windows 10 and Linux Mint; Sometimes terminates the QCad program.
|
|
1996 | QCAD (main) | Bug Report | Low | File > Save: DXF header variable CECOLOR changed | Closed | |
|
Task Description
- Open a DXF file with CECOLOR (current drawing color) set to 256 (ByLayer). - Save DXF - CECOLOR has changed
|
|
2392 | QCAD (main) | Bug Report | Low | File > Save: Dimension override for linear format not s ... | Closed | |
|
Task Description
Dimension override for linear format not saved to file.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9536
|
|
1600 | QCAD (main) | Bug Report | Low | File > Save As: Only partial information shown for avai ... | Closed | |
|
Task Description
Some Linux distributions only show filter strings up to the first “(” in the file dialog.
|
|
1950 | QCAD (main) | Bug Report | Low | File > Save As: File dialog offers unsupported export f ... | Closed | |
|
Task Description
QCAD Pro fails to write R10, R9, R2.6, R2.5 dwg files. Younger types and dxf work as expected. Tested the issue back to QCAD 3.18 - no version is able to save those file types.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6620&p=24980#p24980
|
|
2121 | QCAD (main) | Bug Report | Low | File > Save As: Export as DXF R15 | Closed | |
|
Task Description
Hi,
I have purchased QCAD Pro (3.25.2), the minimum the software can save is R18 when i set at Application Preferences - File - Open/Save.
When i make my drawing and wanted to save to R15, there is notification,
The file format version you are using is not recommended: “R15 [2000/LT2000] DXF drawing [OpenDesign] (*.dxf)”. Custom properties will not be saved. All black entities and layers will be saved as white. All custom colors will be adjusted to the nearest fixed color. Proceed?
I need to save to R15 as my cutting software can only detect R15 drawing at max.
When i save to R15,
My drawing will have 1 line that become a huge circle, making my machine cannot cut as per drawn by me.
Can you help me in solving this R15 issue on QCAD 3.25.2 so that it can save to R15 properly.
|
|
2114 | QCAD (main) | Bug Report | Low | File > Print: Printout offset under Windows | Closed | |
|
Task Description
See Qt bug 5363: https://bugreports.qt.io/browse/QTBUG-5363
|
|
2345 | QCAD (main) | Bug Report | Low | File > Print: printing multiple copies prints too many ... | Closed | |
|
Task Description
File > Print Set copies to 2 4 sheets are printed.
|
|
1742 | QCAD (main) | Bug Report | Low | File > Print: printed point size depends on zoom level | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5548
|
|
1434 | QCAD (main) | Bug Report | Low | File > Print: print offset | Closed | |
|
Task Description
Prints under Windows are offset by the default printer margins.
This is caused by QTBUG-5363, https://bugreports.qt.io/browse/QTBUG-5363
|
|
2310 | QCAD (main) | Bug Report | Low | File > Print: Number of copies and page range ignored | Closed | |
|
Task Description
When try partly print multipage , all pages will be printed. in my this project i reserved 5*10 =50 pages, but so far have made less than 10 ready, which I wanted print out, it always start print all 50 pages, no matter How i try choose.
|
|
2027 | QCAD (main) | Bug Report | Low | File > Print: Minimum line weight for printing is 0.01 ... | Closed | |
|
Task Description
Create drawing in Meters. Create line with line weight 0.25mm. Line prints as 1cm wide as minimum line weight is forced as 0.01 drawing units (i.e. 0.01m) for printing.
|
|
1686 | QCAD (main) | Bug Report | Low | File > Print: Line scale in Viewport wrong if Model_Spa ... | Closed | |
|
Task Description
Case: Line / Lineweight 2mm Model_Space Print Preview off / previously used scale was 1:1 Viewport 1:10 Paper_Space Print Preview scale 1:1 I’ll use the Paper_Space for a print: Works as expected. A 2 mm Line will be printed in 2 mm
__
Line / Lineweight 2mm Model_Space Print Preview off / previously used scale was 1:10 (closed Preview will keep it in memory), Viewport 1:10 Paper_Space Print Preview scale 1:1 I’ll use the Paper_Space for a print: Works not as expected! The Model_Space Print scale is used for scaling the 2 mm Line in the Paper_Space/Viewport. The Line will be printed with a 20 mm wideness.
|