QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummary  descStatusProgress
 1144 QCAD (main)Feature RequestLow Commands history toolbar Closed
100%
Task Description

A new toolbar that shows the last 5, 10 or so commands buttons used would be useful to do repeated tasks on a lot of drawings.

 1599 QCAD (main)Bug ReportLow Commandline - Can not insert @ - No relative coordinate ...Closed
100%
1 Task Description

Hello,

since 3.17.1 (also on 3.17.2.0) it’s impossible to insert “@” in commandline, so it’s impossible to work with relative coordinates in all funktions like rectangle, line etc.
Please do a fast Bugfix, I need that functionality for workflow urgently :-)

Regards

Andreas

Linux Mint 64bit
Cinnamon
Kernel 4.11.6

QCAD 3.17.2.0

 207 QCAD (main)Feature RequestLow command line: shortcut for activation Closed
100%
Task Description

Unable to use space bar to focus on command line to type in commands etc as in Version 2. Need to click in the command line first in order to do so - much easier to use press space bar!

 1232 QCAD (main)Feature RequestLow Command Line: ignore leading spaces Closed
100%
Task Description

Many times, after pressing the space bar to access the command line, accidentally an space character is added at the start of the line. It’s very difficult to see it.

The result is an error like this:

Invalid coordinate or distance ' @20,20'.

The request is for the command line parser to just ignore leading spaces.

Thank you.

 1524 QCAD (main)Bug ReportLow Command line: cannot enter @ sign in command line on Ge ...Closed
100%
Task Description

@ sign cannot be entered into command line on German keyboards on which Alt-Q has to be pressed to enter @.

This is a Qt/Linux bug which interprets Alt-Q as part of a shortcut starting with Q.

Workaround: change shortcut of Reset tool from QQ to something else, not starting with Q.

 1059 QCAD (main)Bug ReportLow Command line tools: log file permissions Closed
100%
Task Description

Command line tools may not have permissions to create bat_log. Windows error:

Access is denied.
The system cannot find the file specified.
Could Not Find C:\Program Files (x86)\<tool>\bat_log

 527 QCAD (main)Feature RequestLow Command line option to use alternative location for con ...Closed
100%
Task Description

Speziell gedacht für den Mobilen Einsatz wie z.B. auf einen USB-Stick um bei wechselnden PC Einsatzorten immer wieder die einmal gemachten Einstellungen für QCad benutzen zu können.

Siehe auch hier:
http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5888#5888

 506 QCAD (main)Bug ReportLow Command line option -quit Closed
100%
Task Description

Crash when launching QCAD with -quit option:

./qcad -quit
 934 QCAD (main)Bug ReportLow Command line not staying active Closed
100%
Task Description

When opening or closing QCAD the command line isn’t staying active.

 181 QCAD (main)Bug ReportMedium command line got uncaught exception Closed
100%
Task Description
  1. start QCAD (no arguments → a new blank drawing is shown)
  2. enter “new” into the command line
  3. close both drawings / tabs
  4. click into command line edit field and press “arrow up”
'di'
873QCAD (main)Feature RequestLowcommand line does not accept distance value for funtion...Assigned
0%
Task Description

In the comnmand line, I can sucessfully enter for example the radius of a circle to draw (Space 100 Enter) but the command line does not accept a value for the distance when drawing parallel lines (l p space 100 enter → error).

 1429 QCAD (main)Bug ReportLow Command line calculator: functions containing number fo ...Closed
100%
Task Description

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=89&t=4235&start=15

 1421 QCAD (main)Bug ReportLow Command line calculator: functions containing 'd' broke ...Closed
100%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=89&t=4235&start=15

277QCAD (main)Feature RequestLowcommand line arguments: allow class name after -execAssigned
0%
Task Description

command line arguments: allow class name after -exec

 454 QCAD (main)Feature RequestLow combined move/rotate/scale with two reference points Closed
100%
Task Description

It would be extremely helpful, if marked objects could be moved/rotated/scaled in a single step with two reference points as source and two reference poitns as destination. With a tool like this, “should match”-drawings could be merged easily.

1452QCAD (main)Feature RequestLowColour opacity optionAssigned
0%
1 Task Description

Not sure how difficult this would be to implement but just wondered if it is possible to have an option in QCAD to change the opacity of a colour ?

related to topic: http://www.qcad.org/rsforum/viewtopic.php?f=83&p=15715&sid=45f0f0679e8257f3cf98f91e4f0c4577#p15715

 761 QCAD (main)Feature RequestLow Colour Indicators for Layer List Closed
100%
3 Task Description

Layers are great for organizing a project. For construction lines alone I sometimes use 3 and more layers. And then there are more layers for each part I design. Each with its own colour.

And when a project gets bigger I start wishing for a quick overview in the layer list to the colours I use on them. So I wish for colour indicators on the layer list to quickly identify the membership of a line to a layer.

I have a small image attached to make you see, what I mean.

 537 QCAD (main)Bug ReportLow colors changed for print Closed
100%
Task Description

light grey is printed as black starting with RC5 (was grey in RC4 which was fine)

 427 QCAD (main)Bug ReportLow Color of text subscripts incorrect Closed
100%
Task Description

I have a diagram with text containing subscripts. Trying to color the text other than black (white on screen) leaves only the initial character of the subscript colored:
I am using the Mac OS X RC3 version.

 1055 QCAD/CAMBug ReportLow code page problem Closed
100%
Task Description

After creating the labels in drawing in Russian (Cyrillic), after saving and reopening the drawing file - changing the text encoding (??????????). Need to re-type the text ... How to fix this error?

 1145 QCAD (main)Bug ReportHigh Closing inactive tab of a modified drawing: drawing fil ...Closed
100%
Task Description

Steps to reproduce:

1. Create new drawing and fill it with some contents that’s easy to distinguish, for example text “DRAWING 1”.
2. Save it as dr1.dxf
3. Close it
4. Open dr1.dxf
5. Edit it, for example change text from “DRAWING 1” to “DRAWING 2” 6. Save changed file as dr2.dxf
7. Close it
8. Open dr1.dxf (it should have content “DRAWING 1”)
9. Open dr2.dxf (it should have content “DRAWING 2”)
10. Close tab dr1.dxf
10.1 Qcad will ask you to save changes.
10.2 Press “Yes” –> nothing happens, dialog doesn’t disappear.
10.3 Press “Discard” –> dialog disappears, tab gets closed
10.4 Tab that has content of file dr2.dxf (”DRAWING 2”) remains open but gets title “dr1.dxf” (!)
11. Close tab
12. Press “Yes” in dialog that asks to save changes

Results:
1. Open dr1.dxf
2. Open dr2.dxf
As you can see, both files have equal contents (”DRAWING 2”)

Expected results:

1. Files have their own contents.
2. Dialogs asking to save files disappear when checking “Yes”, “Cancel” or “Discard” 3. Tabs don’t change titles and associated file names when other tabs are closed.

 48 QCAD (main)Bug ReportLow Close drawing from print preview Closed
100%
Task Description

Fails if drawing was modified and user wishes to save drawing.

 146 QCAD (main)RefactoringLow cloning entities: optional ID cloning Closed
100%
Task Description

add parameter to REntity::clone to allow cloning without cloning object ID.

 963 QCAD (main)Bug ReportLow Clip to rectangle / clear area on block references Closed
100%
Task Description

“Clip to rectangle / clear area” in combination with a Block will explode the Block and change all line attributes for the exploded ex-block.

Pics: Before / after using the tool.

609QCAD (main)Feature RequestLowClean up toolAssigned
0%
1 Task Description

To have a ‘clean up ' tool to:

- eradicate duplicate lines
- eradicate stray points
- remove empty layers
- remove unused blocks

Perhaps with an initial dialog which allows the user to choose what they want to clean up.

2041QCAD (main)Bug ReportLowcircletangent2 doesn't solve correctly if the defining ...Assigned
0%
Task Description

In my example I can’t draw a circle with circletangent2 if the defining point is on one of the defining tangents. The tangency is lost when I try to do this.

I attached 4 screenshots: TheExample.png, TryingPoint1.png, TryingPoint2.png and The_Point_Isn’t_On_The_Tangents.png.

 858 QCAD (main)Feature RequestLow Circle/Arc tangential on entities ... Closed
100%
Task Description

I’m not sure but if this is a duplicate please delete!

Feature Request:
It would be nice to have a tool what will help to draw tangential circles and arcs between other entities.

I imagine this tools with a three entities (circles, lines) selection or two entities plus a radius.

 1800 QCAD (main)Bug ReportLow circle/arc intersection bug with line Closed
100%
Task Description

There is a case that qcad do not detect intersection between a circle/arc and a line. Attached is an example.

 898 QCAD (main)Bug ReportLow Circle tool regression in git ec746571 Closed
100%
Task Description

Git ec746571 introduced the following artifact:

  • Start circle tool, center and radius
  • Click on point to select radius
  • Circle appears, along with a line to the coordinate system origin; also circle is not closed at around where this ghost line hits the circle entity
  • Happens with any circle tool, in slightly different manners
  • Doesn’t happen with any other tool, as far as I can tell

100% reproducible, doesn’t happen on git 6171094d.

This ghost line is also added to existing circles; ie. opening a drawing that has circles, a ghost line is attached to each of them. Not always pointing to the origin, but seems kind of random (changes with zoom level etc.)

It doesn’t seem to be a part of the drawing as such, as in ZA will not zoom so that all these ghost lines are fully visible, but the visual artifact remains.

If relevant: Linux/amd64 (Ubuntu 12.04), Qt 4.8.1, GCC 4.6.3, and as said, QCAD git ec746571.

Lines on attached illustration were not actually drawn in any way, shape or form; also they behave as if a particular line and its corresponding circle were a block, except one end of the line is firmly attached to origin.

 1937 QCAD (main)Bug ReportLow Circle shown in QCAD but not in AutoCAD Closed
100%
Task Description

The attached drawing shows two large concentric circles when viewed in QCAD but the inner circle is missing when viewed in other CAD programmes. This cost $50 in rework as my laser cutting was not cut correctly!

 1465 QCAD/CAMBug ReportCritical Circle is drawn as polygon Closed
100%
Task Description

Hi,

I have a circle and circle is not round.
Unit of drawing is in metres and radius is set to 2.38.
The circle displays as a polygon instead.

 852 QCAD (main)Bug ReportLow Circle hatch undo not correctly working .... Closed
100%
Task Description

Task: Selected “all” (Circle + Hatch)
Move / Copy tool,
Reference, move/copy, place, KEEP ORIGINAL, OK,
Undo,
Works!!!

Same scenario but DELETE ORIGINAL,
Undo,
Doesn’t works correctly! :-(

 292 QCAD (main)Feature RequestVery Low Choose number of copies when using 'snap with distance  ...Closed
100%
Task Description

Choose number of copies when using ‘snap with distance to end’.

This might make sense for certain tools only.

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1643

 1828 QCAD (main)Bug ReportLow Chinese language not loading correctly Closed
100%
Task Description

Most of the Chinese items cannot be shown correctly. But when I check the qm files, the translation are there and the contents are correct.

I’m using the Pro version 3.21.3.0

 930 QCAD (main)Bug ReportLow Chinese font type saving problem Closed
100%
Task Description

Dear Sir:
I am an user in Taiwan. I need to use Chinese. While editing, the font appearance can be display in view port, but after saving-closing-re-opening, the font type is missing. For example, while I type Chinese with font type “B” or “C” and save the file, the font all become font type “A” with reopening and the “Main Font” selector inside “Text” dialog window is blank. I need to re-open “Text” dialogue window and re-select font type, then click the working view port, the display of text changes. Its inconvient. In previous version it’s ok. I can’t remember the exact version of well-saving-Chinese-font function because my computer is not in my house. It might be version 3.1.x. I don’t think it’s a major problem, but could you please deal with this problem while having time.

 1932 QCAD (main)Bug ReportVery Low Check for update fails to discover new version Closed
100%
Task Description

“Help→Check for QCAD Pro Updates” fails to discover new version. Tested on OSX and Linux versions.

 182 QCAD (main)Bug ReportLow check for new version Closed
100%
Task Description

Check for new version of QCAD:

  • during start up
  • through menu ‘Help - Check for new version’

Server:

  • URL which contains current version number as plain text

Client:

  • request URL
  • compare versions
  • different version available:
    • minor update: you can download an update... (1st online page)
    • major update: you can purchase an update... (2nd online page)
 1571 QCAD (main)Bug ReportLow character map not showing special characters that have  ...Closed
100%
Task Description

I use a font that changes the characters of latin and greek to technical symbols.
http://www.fontspace.com/micronus/y145m-2009 The font is installed and working okee.
But in the text tool → special characters button → others I expect to see this modified character map but instead I see the standard unicode characters.
When I use a gtk tool gucharmap I can see the character map as expected.
Now it is really combersome to enter the special characters.

 20 QCAD (main)Bug ReportMedium Changing drawing unit makes QCAD hangs Closed
100%
Task Description

Changing the unit of a drawing can make QCAD hangs

  • Mile: QCAD hangs in endless loop
  • Nanometer, Microinch: view turns white, at some levels of zoom, it turns gray
  • Foot, Yard: GraphicsView grid too small meshed
 389 QCAD (main)Bug ReportMedium Changes in "Shortcuts and Commands" are not storable... Closed
100%
Task Description

You can’t save changes in “Application Preferences > Shortcuts and Commands”!
It works only for the current session - after a restart the settings are back on default

1282QCAD (main)Feature RequestLowChangeable color of the selection bar in layer list. Assigned
0%
1 Task Description

Changeable color of the selection bar in the layer list.
Now the color of the bar is darkblue and the underlaid icons are black and are not readable.

1651QCAD (main)Feature RequestLowChange thickness of arch tick for dimensioningAssigned
0%
Task Description

An option in the drawing preferences to change the line thicknesses for arch ticks would be a huge plus, at the moment I am having to insert ‘arch tick’ blocks for this.

525QCAD (main)Feature RequestLowchange the printed symbol of pointsAssigned
0%
Task Description

Hi,

in QCAD3 RC2 points were printed as crosses, in QCAD3 RC4 they are printed as (very little) points. I think this isn’t a bug but a feature. ;-)

It would be nice if one could change this behaviour / select the symbol of points.

Best regards - Stefan

This is a double post of http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5870#5870 as suggested there.

1810QCAD (main)Feature RequestLowChange icons from black on white to white on black depe...Assigned
0%
Task Description

Automatic change of icons in the Library Browser from black on white to white on black or vice versa depending on the background (white or black; light or dark) in QCAD main window.
See also https://www.qcad.org/rsforum/viewtopic.php?f=31&p=21970#p21970

1255QCAD (main)Feature RequestLowChange a quote value modify the drawing + link quotes w...Assigned
0%
Task Description

Change a quote value modify the drawing + link quotes with entities

In other words, makes quotes editable AND linked to entities.

  • Today in the properties, the value is read only. Being able to edit the value would modify the linked entity properties to fit the new quote.
  • Changing a property would change the linked quotes accordingly. Today, if I change a circle diameter which is quoted, the quote remain where it was and is no more relevant.
 259 QCAD (main)Feature RequestMedium Chain dimensions Closed
100%
11 Task Description

Chain dimensions

 1077 QCAD (main)Bug ReportLow Centreline Cross using wrong Coordinate Format Closed
100%
Task Description

My Coordinate Format/Decimal Point is adjusted to Dot’.’ but the “Centreline Cross (C,S)” will only accept Comma for Angel. X/Y works fine!

BTW: Is the spelling correct in the Menu? Should it be spelled “Centerline Cross” instead of “Centreline Cross” ...?

 1377 QCAD (main)Bug ReportVery Low CE - is asking to save an untouched drawing Closed
100%
Task Description

If I launch the CE edition / do nothing with the empty default drawing and then try to terminate QCAD an unexpected warning pops up:

Do you want to save the changes you made in ‘Untitled 1’ ...

Hey - I haven’t change anything and there is nothing what needs to be saved ... ;-)

1469QCAD (main)SuggestionLowCartouche automatiqueAssigned
0%
1 Task Description

Would not it be possible to create a kind of template for printing?
We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).

Original suggestion:

Bonjour,

Ne serait il pas possible de créer une sorte de template lors de l’impression ?
On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).

1838QCAD (main)Feature RequestLowCarbide Create importAssigned
0%
Task Description

Add support for importing Carbide Create files (.c2d).

Format is JSON based, human readable.

Showing tasks 1751 - 1800 of 2103 Page 36 of 43<<First - 34 - 35 - 36 - 37 - 38 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing