QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummary  descStatusProgress
 264 QCAD (main)Feature RequestMedium Support for "Layouts" (paper space, viewport) Closed
100%
25 Task Description

There is one important ACAD feature that I would really like to see supported in QCAD3 and that is “Layouts”

Looking at the block lists, it seems to me that it can’t be too much extra work to support it, since the model space and different paper spaces are already shown there - and one can edit it.

QCAD draws infinitely easier than ACAD and drawing layouts is a primary feature of ACAD. With this in QCAD I can hardly see why anyone that does 2D work would need ACAD at all.

 297 QCAD (main)Feature RequestLow Support drawing linetype scale factor (LTSCALE) Closed
100%
Task Description

Support drawing linetype scale factor (LTSCALE)

2037QCAD (main)Feature RequestLowSupport alternative angle referenceAssigned
0%
Task Description

E.g. 0 degrees at the top, clock-wise for positive direction, alternative angle units.

1886QCAD (main)Feature RequestLowSupport advanced tolerance settings for dimensionsAssigned
0%
2 Task Description

Add support for
- tolerance display (dimtol)
- upper limit (dimtp)
- lower limit (dimtm)
- tolerance precision (dimtdec)
- tolerance text size factor (dimtfac)
- tolerance suppress zeros, etc.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6269

 1048 QCAD (main)Bug ReportLow Support "ByBlock" for block attributes Closed
100%
Task Description

E.g. if a block reference has its color set to ‘red’ and the block reference has an attribute with color=’ByBlock’, the attribute should be displayed in red.

1034QCAD (main)Feature RequestLowSupplementary note added to Application preferences dia...Assigned
0%
Task Description

I think it would be useful to add a note to the Application preferences dialog window, to explain to the user the difference between ‘Application and Drawing’ preferences and how it effects drawings in QCAD.

Please see topic for more details and feedback:

http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2831&p=9724#p9724

1126QCAD (main)Feature RequestLowSuggestion for Dimension Location settingAssigned
0%
3 Task Description

Please seet topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3124

 1782 QCAD (main)Bug ReportLow Successive middle mouse button zoom in/out: delay betwe ...Closed
100%
Task Description

I very much like the new middle mouse button zoom in/out and congratulate Andrew for implementing it so quickly but there’s an annoying delay that is necessary between successive zoom in/out actions. This is easily understood by comparing it to zooming in/out with the +/- keys. With the keyboard you can repeat zooms as quickly as the keyboard repeat rate allows; with the middle mouse button quick zooms are not possible.

 476 QCAD (main)Bug ReportLow Stretching dimension Closed
100%
Task Description

Draw a horizontal dimension. Stretch (S S) it. The label remains in place. It should instead go to the new center. (Unless it was manually positioned perhaps...)

Workaround: Pick one extension and drop it to where it was, label gets centered.

 906 QCAD (main)Bug ReportLow Stretch: not working for hatch entities Closed
100%
Task Description

Stretching hatch entities results in broken hatches.
Regression introduced in QCAD 3.1.5, bug still present in 3.2.2.

 945 QCAD (main)Feature RequestLow Stretch tool for blocks ... Closed
100%
Task Description

It would be nice if we could use the Stretch tool also on blocks.

There are so many possibility’s to build a really good (time-saving) block-list /library with preassembled parts but if I have always to explode / ruin the block to use the stretch tool doesn’t helps the productivity.

 350 QCAD (main)Bug ReportLow Strech function of version 3.0.0 Beta does not work (ha ...Closed
100%
Task Description

The stretch function does not work at all. I tried it in the old version 2.2.2 where it worked.

 808 QCAD (main)Bug ReportLow Strange 'jumpy' behavior when closing drawing windows. Closed
100%
Task Description

Test case:

In Windows, set up say 2 or 3 new blank drawings.Then close them down one by one and notice the behavior when closing these drawing windows down!

2178QCAD (main)Bug ReportLowStored Color of text dimension changesAssigned
0%
Task Description

QCAD Pro 3.25.2.7 Win7 Wininstaller 32bit
Related Topic:
https://www.qcad.org/rsforum/viewtopic.php?&t=7954

Reported is that black is saved as #00004c (dark blue)
Radek (iMac (Retina 5K, 27-inch, 2017), Catalina 10.15.7 (19H114)

My system/installation saves black as #4c000 (dark red)

When using single primary colors these get reduced to #4c, #7f, #99, #cc & #ff.
The threshold for that are #00, #65, #8b, #b2 & #e5
See: DimColorScale (png & dxf)

8 standard CAD colors fail saving correct
Black (something with #4c)
Dark Red, Dark Green, Dark Blue, Dark Cyan, Dark Magenta, Dark Yellow
(#80 turns #7f)
& Gray
(#adadad instead of #a0a0a4)

As with Gray, when mixing the 3 colors it gets rather fuzzy ...
#505050 & #555555 both turn #5b5b5b
&
#464646 turns #4c4226

A snippet of my investigation is included in the topic
(45 files in a ZIP)

CVH

 2152 QCAD (main)Bug ReportLow Status change for Visibility in Viewports fails Closed
100%
Task Description

Status change for Visibility is without any effect on Viewports in Paper_Space.

Case:
Entities drawn on a layer in Model_Space. Visibility on/off works.
Situation covered with a Viewport, placed in Paper_Space, Edit content launched for that Paper_Space, Visibility on/off doesn’t works.

It was properly working in previos QCAD versions ...

 398 QCAD (main)Feature RequestLow status bar: avoid scientific display Closed
100%
Task Description

status bar: avoid scientific display of large float numbers

see also:
http://ribbonsoft.com/rsforum/viewtopic.php?t=1717

 619 QCAD (main)Feature RequestLow Status bar - X,Y etc. input fields  Closed
100%
Task Description

It could be very useful to have in the status bar area - input fields for typing in X and Y position, Distance and Angle etc...

For example these could be used instead of entering absolute/relative coordinates in the command line.

1.Draw line.
2.Start point - enter in X Field.
3.Next point - enter in Y Field.

This method could also be used for specifying positions when placing other entities.

For me I tend to use a combination of the command line/GUI for most work but I think for those who do not wish to use the command line this could be useful.

 1935 QCAD (main)Bug ReportLow Startup preferences Closed
100%
Task Description

Startup preferences

On Mac 10.14.6: QCAD Pro → Preferences... → Startup

Check or uncheck “Enable Splash Screen”

1. Restart of QCAD, the splash screen with Initialising add-ons xx% is identical

2. Apply, Cancel and OK buttons - why have both Apply and OK buttons?

 1947 QCAD (main)Bug ReportLow Startup failure Closed
100%
Task Description

QCAD community, Git ba68e28d3d (current HEAD), fresh clean compile on Ubuntu 18.04/x64 (gcc 7.4.0, Qt 5.9.5)

QCAD version  3.23.0.2
Warning:  QApplication: invalid style override passed, ignoring it.
Warning:  Qt WebEngine seems to be initialized from a plugin. Please set Qt::AA_ShareOpenGLContexts using QCoreApplication::setAttribute before constructing QGuiApplication.
Warning:  action not found: "Scheme"
Warning:  RScriptHandlerEcma::eval: script engine exception:  "TypeError: Result of expression 'RS.getIdealThreadCount' [undefined] is not a function."
Warning:  "<anonymous>(uiFile = 'scripts/Widgets/ViewportWidget/ViewportWidgetQt.ui', graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:172\n<anonymous>(viewports = [object Object], uiFile = undefined, graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:75\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:248\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:796\n<global>() at scripts/autostart.js:834"
Warning:  RScriptHandlerEcma::eval: script engine exception:  "TypeError: Result of expression 'RS.getIdealThreadCount' [undefined] is not a function."
Warning:  "<anonymous>(uiFile = 'scripts/Widgets/ViewportWidget/ViewportWidgetQt.ui', graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:172\n<anonymous>(viewports = [object Object], uiFile = undefined, graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:75\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:248\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:796\n<global>() at scripts/autostart.js:834"
Warning:  At least one uncaught exception:
Warning:  "<anonymous>(uiFile = 'scripts/Widgets/ViewportWidget/ViewportWidgetQt.ui', graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:172\n<anonymous>(viewports = [object Object], uiFile = undefined, graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:75\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:248\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:796\n<global>() at scripts/autostart.js:834"
17:14:39: Debug:    "<global>() at 172"

Then QCAD exits (does not start). As far as I remember, 3.23.0.2 release was fine.

 1802 QCAD (main)Bug ReportLow Startpoint indication disapears for some entities while ...Closed
100%
Task Description

Having a multi selection and at least one ‘older’ arc the startpoint indication in red of some entities might disappear.

Entities that suffer from this are:
Other arcs
Polyline
Splines

Only the ‘oldest’ arc in selection will have a startpoit indication.
Multi selection of ‘newer’ entities from the list above will not if an ‘older’ arc is part of the selection.
Deselecting de ‘older’ arcs will reveal the startpoints up to the ‘oldest’ arc.

In the file provided entities where drew in order from left to right.
Select all and start deseleting arcs from the left.

The behaviour is affected by changing the draw order property and a save/close/open.
In the second file the rightmost arc was set to draw order 7, the same as the 4th was.
After save/close/open it is renumbered to 8 and the behaviour is different as in the firts file.

Regards

 582 QCAD (main)Bug ReportLow Standard font from QCad2.2 has to be explicitly set bac ...Closed
100%
Task Description

Hi,

If you open an old qcad drawing thats DXF and edit text, the popup window shows “Main Font” as empty.

If you do not set the font and complete the edit, it will change the font from the standard to what looks like an Arial font.

If you set the font as “standard” during the edit, each time in future you open the editor it does at least have standard selected.

Ie if no font is specified in drawing, should it not select “standard”?

James

 530 QCAD (main)Bug ReportMedium sporadic unwanted close of QCad Closed
100%
Task Description

Using the move and scale tools, QCad sometimes (reason unknown so far) crashes in RC4 (never seen that in RC2).

 160 ECMAScriptBug ReportMedium SplitIntoEqualParts.js: Uncaught exception Closed
100%
Task Description
 
Uncaught exception at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:174: Error: :-1:-1: REntity: Argument 0 is not of type REntity *REntity *.
<native>(RLineEntityPointer(0xb73b4c8)) at -1
<anonymous>(op = RAddObjectsOperation(0xb733790), argLine = RLineEntityPointer(0xb73b4c8)) at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:174
<anonymous>(op = RAddObjectsOperation(0xb733790)) at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:111
<anonymous>(true) at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:95
<anonymous>() at /home/martin/workspace/rsframework/scripts/Modify/../EAction.js:1150
<anonymous>() at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:73
<global>() at -1
174	        line.copyAttributesFrom(argLine);

qsdb> argLine
RLineEntityPointer(0xb73b4c8)
 613 QCAD (main)Bug ReportLow Split entities: wrong interpretation of start angle inp ...Closed
100%
Task Description

Split entities: start angle must be entered in degrees * 1rad (converted from degrees to rad twice)

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=1909

 1141 QCAD (main)Feature RequestLow Split command on Ellipse and Spline curve Closed
100%
Task Description

Would it be possible to use the Split command on Ellipse or on Spline curve?

Now it works on lines, arcs and circles only.......

 926 QCAD (main)Feature RequestLow Splines: break up at point Closed
100%
1 Task Description

Break up spline at given point, break out segment, etc.

1407QCAD (main)Feature RequestLowSplines: add support for knot weights, start-, end tang...Assigned
0%
Task Description

Attached DWG/DXF files are incorrectly read by QCAD.
They contain splines drawn using ZWCAD and saved as DWG/DXF version 2000.
Above splines are polylines created with autolisp routine which converts spline to polyline, so you can see how splines should actually be drawn.

First spline is created with fit points: 2,2 4,4 6,2
Then copied and applied weight of 2 on central control point.
Then copied again and applied weight of 0.5 on central control point.

Second spline is created with fit points: 6,2 8,4 10,2 with vertical start and end tangent.
Then copied and applied fit tolerance of 1 for fit points.

Third spline is created with fit points: 10,2 12,4 14,2 with horizontal start and end tangent.

Fourth and fifth spline are correctly drawn by QCAD.

Link to bitmap (converted to png) export:
External Link

Versions
QCAD version: 3.13.1.0
Date: Mar 17 2016
Qt version: 4.8.4
Compiler version: gcc 4.4.3
Build Date: Mar 17 2016
Revision:
Architecture: x86_64
OS: Linux
OS version: Unknown

1107QCAD (main)Feature RequestLowSplines: add / remove control points of existing spline...Assigned
0%
Task Description

Tools to add control points to existing splines and remove control points.

 1918 QCAD (main)Bug ReportLow Splines whit control points of order 1 and 4 not select ...Closed
100%
Task Description

Set up a spline with control points let’s say of the order 3.
Clone it 3 times with some offset in x&y.
Edit the degree property and set 1ste to 1, 2nd to 2, aso
Draw select partially from right to left.
Those of the order 1 and 4 aren’t selected.

Regards

 1945 QCAD (main)Bug ReportLow Splines saved incorrectly Closed
100%
Task Description

Closed splines (Control points) are saved as “not closed” with a new knot (when DXF is closed and re-opened).
Is this behavious intended ?

 850 QCAD (main)Bug ReportLow Splines not selectable Closed
100%
Task Description

Imported splines which typically represent lines, circles or arcs (explicit knot vector given) are sometimes wrongly identified as invalid by the OpenNURBS library.
This results in splines that are loaded and displayed correctly but are not selectable.

 2039 QCAD (main)Bug ReportLow splines are not showing when drawn by QCAD Simple API n ...Closed
100%
1 Task Description

Hi guys,

I’m trying to create an spline to a complex library component, but it seems splines are not working properly. I would appreciate some help. These are minimum scripts to demonstrate the problem:

Example 1:

include("scripts/simple.js");

function TesteSpline() {
}

TesteSpline.init = function(formWidget) {
    if (!isNull(formWidget)) {
        TesteSpline.widgets = getWidgets(formWidget);
    }
};

TesteSpline.generate = function(documentInterface, file) {
    return TesteSpline.criarCorpo(documentInterface);
};

TesteSpline.generatePreview = function(documentInterface, iconSize) {
};

TesteSpline.criarCorpo = function(documentInterface) {

    addSpline([[0,0],[20,30],[100,100],[110,120]], false); // it doesn't work :-(
    addLine(0,0, 100,100);  // it works!!!

};

Example 2:

include("scripts/library.js");

function TesteSpline() {
}

TesteSpline.init = function(formWidget) {
    if (!isNull(formWidget)) {
        TesteSpline.widgets = getWidgets(formWidget);
    }
};

TesteSpline.generate = function(documentInterface, file) {
    return TesteSpline.criarCorpo(documentInterface);
};

TesteSpline.generatePreview = function(documentInterface, iconSize) {
};

TesteSpline.criarCorpo = function(documentInterface) {
    var addOperation = new RAddObjectsOperation(false);
    var doc = documentInterface.getDocument()
    // Spline
    var cavaData = new RSplineData();
    cavaData.appendFitPoint(new RVector(0,0));
    cavaData.appendFitPoint(new RVector(10,10));
    cavaData.appendFitPoint(new RVector(30,30));
    cavaData.isClosed = false;
  
    // It doesn't work
    var cava = new RSplineEntity(doc,cavaData);
    addOperation.addObject(cava);

    // it works
    var textData = new RTextData(new RVector(2,10),new RVector(2,10),0.4,0.4,0,0,0,0,1,"Hello","Arial",false,false,0,false);
    addOperation.addObject(new RTextEntity(doc,textData));

    return addOperation;
};



 1014 QCAD (main)Bug ReportLow Spline shape changes in DXF/DWG file when saved after m ...Closed
100%
Task Description
  1. Draw Spline from fit points
  2. Mirror spline
  3. Save as DXF/DWG
  4. Load into 3rd party application
  5. spline shape changed

Reconstructing the mirrored spline from scratch maybe used as a workaround.

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2754

 1289 QCAD (main)Bug ReportLow Spline from fit points: load error for non-periodic but ...Closed
100%
Task Description

After saving an open designed Spline QCad will open it the next time as a closed spline.
Trying to fix this in the Property Manager using “Closed Periodic yes/no” leads to an open but broken spline.

Pic 1 = designed
Pic 2 = saved/opened from HD
Pic 3 = Try to fix this with the Property Manager

 777 QCAD (main)Bug ReportLow Spline display error Closed
100%
Task Description

Splines produced by Illustrator are not correctly imported or displayed.

See:
http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2344

 1086 DocumentationBug ReportLow Spline corner control responding to multiple mouse clic ...Closed
100%
Task Description

I can’t find any documentation (Reference Manual / Book) about the possibility to change the “corner” transition shape for Spline’s (Control Points) with multiple mouse clicks.
1, 2 or 3 clicks = smooth to sharp corner.

 874 QCAD (main)Bug ReportLow Spelling error in 3.2 for 3 Tangents (CT3) Closed
100%
Task Description

In the feedback info for 3 Tangents (CT3) there is a spelling error!

‘tree’ instead of Three is used.

 215 QCAD (main)Bug ReportLow Space to revert to keyboard entry Closed
100%
Task Description

Space bar does not change to keyboard input for coordinates, etc.

 1451 QCAD (main)Bug ReportLow Space doesn't move focus to undocked command line (Linu ...Closed
100%
Task Description

Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4331

 659 QCAD (main)Bug ReportVery Low Some true type fonts may not be supported Closed
100%
Task Description

Customer reports that TTF called “Magneto” is not shown properly.

 1500 QCAD (main)Bug ReportVery Low Some plugins not built right in debug mode Closed
100%
Task Description

Building current HEAD (5468b69) with:

/usr/local/lib/qt5/bin/qmake \
        QMAKE_CXXFLAGS="-g -ggdb3 -I/usr/local/include" \
        QMAKE_LIBS="-lcxxrt -L/usr/local/lib" \
        -r
make debug
tinky:~/w/qcad/qcad$ ../qcad.sh
Launching QCAD debug
QCAD version  3.15.5.7
RPluginLoader.cpp:67, static QStringList RPluginLoader::getPluginFiles():
11:25:06: Debug:    Ignoring release plugin built in debug mode:  "libqcadexample.so"
RPluginLoader.cpp:67, static QStringList RPluginLoader::getPluginFiles():
11:25:06: Debug:    Ignoring release plugin built in debug mode:  "libtransactionlistener.so"
RDxfPlugin.cpp:9, virtual bool RDxfPlugin::init():
11:25:06: Debug:    RDxfPlugin::init
RDebug.cpp:81, static int RDebug::stopTimer(int, const QString &, int):
11:25:15: Debug:    TIMER:  1038000000 ns ( 1038 ms )  -  "loading add-ons"
RDebug.cpp:81, static int RDebug::stopTimer(int, const QString &, int):
11:25:19: Debug:    TIMER:  18446744073365584320 ns ( 18446744073365 ms )  -  "initializing add-ons"
RScriptHandlerEcma.cpp:1468, static QScriptValue RScriptHandlerEcma::ecmaMessageHandler(QScriptContext *, QScriptEngine *, RS::MessageType):

For whatever reason, libqcadexample.so and libtransactionlistener.so don’t get named _debug.so (which seems to be the cause for the message), while libqcaddxf_debug.so seems to be OK.

The following diff sorts this out, with no apparent ill effect:

diff --git a/support/examples/exampleplugin/exampleplugin.pro b/support/examples/exampleplugin/exampleplugin.pro
index 0c58c56..d72a866 100644
--- a/support/examples/exampleplugin/exampleplugin.pro
+++ b/support/examples/exampleplugin/exampleplugin.pro
@@ -1,7 +1,8 @@
-include(../../../shared.pri)
 CONFIG      += plugin
 TARGET      = $${RLIBNAME}example
 
+include(../../../shared.pri)
+
 TEMPLATE    = lib
 HEADERS     = RExamplePlugin.h
 SOURCES     = RExamplePlugin.cpp
diff --git a/support/examples/transactionlistener/transactionlistener.pro b/support/examples/transactionlistener/transactionlistener.pro
index ed6c84d..7ee9bef 100644
--- a/support/examples/transactionlistener/transactionlistener.pro
+++ b/support/examples/transactionlistener/transactionlistener.pro
@@ -1,7 +1,8 @@
-include(../../../shared.pri)
 CONFIG      += plugin
 TARGET      = transactionlistener
 
+include(../../../shared.pri)
+
 TEMPLATE    = lib
 HEADERS     = TransactionListenerPlugin.h
 SOURCES     = TransactionListenerPlugin.cpp
 560 QCAD (main)Bug ReportVery Low Some parameters changes lost after saving and reopening ...Closed
100%
Task Description

Hi,
First of all, thanks for this wonderful product !

My issue : when I modify (at file level) some parameters like the number of decimals in cotations, or the linethikness of a calc, these modifications are lost after saving and reopening the dxf. It comes back to the default values. It is not the case for the colors for instance.

At your disposal for other informations.
Fred

 2071 QCAD (main)Feature RequestLow Solid hatch fade Closed
100%
Task Description

It may be useful to implement the fade function in solid hatches, as present in the image options

 469 QCAD (main)Bug ReportLow Solid entity properties Closed
100%
Task Description

Split from  FS#465  by Stefan:

After more testing, it seems that a solid triangle causes trouble, perhaps correlated to Z-coordinates and the property editor.

Attached you find a dxf example file with only 7 objects. Three noticable cases:
- Selecting all and change Selection in the property editor to “Solid” flips to “No Selection” although objects selected.
- Selecting all and change Selection in the property editor to “Line” shows “Length” and “Angle” in Geometry with “*VARIES*” values although only one line is selected.
- Selecting all but the solid object (6 objects selected now), everything works as expected, in particular Selection “Line” shows valid values (and Z-coordinate 0).

I hope this helps, please give instructions how to help if necessary.

 710 QCAD (main)Bug ReportLow snapshot 3.0.3 - input fields showing ' Expression is e ...Closed
100%
Task Description

Windows 7 -64
snapshot 3.0.3 - tool input fields showing ' Expression is empty ' , even after inputting values.

 1379 QCAD (main)Bug ReportLow Snap: cannot snap to intersection between infinite line ...Closed
100%
Task Description

Intersections between polylines and XLines (infinite lines, contruction lines) cannot be found in some situations.

 1088 QCAD (main)Bug ReportLow Snap: can snap to endpoints of text entities in block r ...Closed
100%
Task Description
  • Create block with text entity in it
  • Insert block reference
  • Snap tools snap to endpoints, centers, etc. of text entity shapes
736QCAD (main)Bug ReportLowsnap tool menu is shown before specifiv tool menuAssigned
0%
Task Description

When creating a new file, selecting the e. g. line tool at first opens the linemenu and the snap tool menu as expected. After clicking on the back button twice (going back to the main menu) and selecting the e. g. circle menu, the snap tool menu is shown instead of the circle menu. Instead the circle menu is shown after pressing the back button again.

This only happens when clicking on the back button, but with any tool menu seleected. Pressing escape to go back does not show this problem.

QCAD is running on Mac OS Mountain Lion.

 126 QCAD (main)Feature RequestLow Snap to reference points of arcs Closed
100%
Task Description

Snap to reference points does not work for arc entities as one would expect.
The four points on the arc at angles 0,90,180,270 should be reference points (like for circles).

 492 QCAD (main)Bug ReportLow Snap to intersection manual in block references Closed
100%
Task Description

Wenn ich versuche einen Block zu verschieben mit dem Ziel “Intersection manual” wird nicht die im Block ausgewählte Linie benutzt sondern alle im Block befindlichen Linien die eine “Intersection manual” ermöglichen würden.

Auch die visuelle Auswahlerleichterung einer Linie (Farbe ändert sich beim drüberfahren mit der Maus) wird im Block nicht unterstützt :(

Showing tasks 301 - 350 of 2179 Page 7 of 44<<First - 5 - 6 - 7 - 8 - 9 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing