QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  ascSeveritySummaryStatusProgress
1888dwg2bmpFeature RequestLowAdd support to disable hatch rendering on "dwg2bmp"Assigned
0%
1 Task Description

Hi!

A friendly request to add an option to disable hatch rendering on “dwg2bmp” conversions.

Depending on the nature of the conversion and the density of the hatch, this may render unintelligible images (see attachments). The option could look like “-t, -nohatch” to indicate hatches should be hidden before rendering. This could potentially become an option too for “dwg2svg” or “dwg2pdf.”

Amazing product, thank you so much!

1890QCAD (main)Feature RequestLowPossibility to address an QCAD extern font folderAssigned
0%
Task Description

Like the Library Browser it would be nice to be able to define a extern font source folder. Especially now after we are able to create our own cxf fonts with QCAD. :-)

The reason is the same why we have it already for the library - without it we have to copy our individual fonts manually every time after a QCAD update to use them uninterrupted for existing and new drawings.

1895QCAD (main)Feature RequestLowAdd support for block transformation matricesAssigned
0%
Task Description

Support transformations by transformation matrix for block references.

See also:
https://www.qcad.org/rsforum/posting.php?mode=reply&f=33&t=6333

1901QCAD/CAMFeature RequestLowCAM Traverse ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very common Traverse Toolpath.

Example added as pdf.

Greetings

1902QCAD/CAMFeature RequestLowCAM G-Block ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very handy G-code Block Toolpath. This ‘toolpath’ also solves a lot of “editing requests”.

1903QCAD (main)Feature RequestLowSaving layer settings, e.g. visibility status, associat...Assigned
0%
Task Description

In a medium complex drawing it may be too much details to have all layers in a drawing visible at once.

Instead a number of views would be created that saves not only zoom level and position but also what layers are visible and not (as appropriate for the purpose of that particular view). This is very cumbersome (to the extent it is not really realistic) to achieve today and requires a lot of duplication of both model and layers.

The advantage of adding this is the ability to have only one model (with multiple views) and avoid duplication of work and the risk of inconsistency inherent with many copies of the model.

As a further (and natural extension to this) would be the ability to used this functionality with view-ports to be able to create (possibly many) paper-spaces from a single model. This would however require view-ports to be aware of what view they are a window into. A single change in the model would then propagate to all defined view-ports and paper-spaces.

1911QCAD/CAMFeature RequestLowDrill ToolpathAssigned
0%
Task Description

Hallo Andrew

It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.

1917QCAD (main)Feature RequestLowAutomatic labels with static information of the drawingAssigned
0%
Task Description

I would like static information of the drawing (like scale, creation-date, modified-date, revision etc) to be available as automatic labels to be placed in the drawing (with selectable style, font etc)

This would greatly simplify the creatin of title sections in the drawing and making sure it is consistent with the actual drawing and not requiring manual “synchronization”.

1920QCAD (main)Feature RequestVery LowEdit > Application Preferences: Add preference to disab...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447

1922dwg2bmpFeature RequestVery LowAdd error message when requesting raster for a non-exis...Assigned
0%
Task Description

It would be nice if QCAD spit some kind of warning message when trying to render a layer with a name that doesn’t exist (and perhaps render nothing), rather than silently rendering an empty image. :D

See https://qcad.org/rsforum/viewtopic.php?f=33&t=6453

1926QCAD (main)Feature RequestLowNo negative coordinate values ? (DO command)Assigned
0%
1 Task Description

Just starting with QCAD, for some hours now - really excellent user interface (compared to other low budget CADs, like DCAD, or BeckerCAD...) !

Surprisingly, point coordinates - entered via the command line, and shown with correct positions on the drawing- are not displayed correctly with the ‘dimordinate’ (DO) command.
There are no negative values, even when the center point (0;0) is right in the middle of the drawing, so points left and below should have !

GW.G

1928QCAD (main)Feature RequestLowOptionnally 'Auto clean up' after generation of NaN / N...Assigned
0%
1 Task Description

Some functions / methods can generate some sort off entity or part with NaN / Null / Null-lenght ... props.
Some explicitly don’t and test their actions with isNull().

As these serve a purpose in some processes, trails of them can be part of the results.
For some users Null / Null-lenght are meaningfull, for other users these produce errors down the line.
In a few cases its a desirable feature eg. controlpoint spline.
(Allthough there are no Null props involved with equal successively controlpoints)

Many problem post on the forum are related to Null - Zero and so on.

In some cases it can’t be undone by re-editing the drawing.
https://qcad.org/bugtracker/index.php?do=details&task_id=1925

If it can’t be undone by Undo/Redo it is a bug.
https://qcad.org/bugtracker/index.php?do=details&task_id=1757

In some cases there is a difference noticed after file save-close-open.

1930QCAD (main)Feature RequestLowOption disable "Auto Zoom on load" for saved "Layout Vi...Assigned
0%
Task Description

Hi,

my setting for “Auto Zoom on load” is checked to on. That works perfect for me for most of my drawings.

But if I save a drawing with Layout Viewports then I have to adjust every Viewport again after loading.

Would it be possible to have an option below Application Preferences / Graphics View / Appearance / Auto Zoom on load / ON which excludes drawings saved with Layout Viewports?

1934QCAD (main)Feature RequestLowDiametric text - overlaidAssigned
0%
Task Description

Diametric text is always placed above a horizontal measurement.

I often want to indicate both the inside and outside diameter of an object e.g. a wheel using diametric text. The text is overlaid and illegible.

To avoid text overlapping, I use Horizontal Aligned because I can control the position of the text to avoid illegible text.

A better method would be to alternate the placement of diametric text (alternatively) above and below a measurement so that in the majority of cases an overlap would be avoided.

Similarly for a vertical measurement, the text is overlaid and illegible.

When the angle is almost vertical, the angle controls the side the text appears however it also reverses the direction of the text (which is logical but not attractive).

Kind regards
Simon

1940QCAD/CAMFeature RequestLowCAM > CAM Configuration: Add program descriptionAssigned
0%
1 Task Description

Add a program description to the CAM configuration dialog and export to postprocessors as variable.

See also:
https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649

1976QCAD (main)Feature RequestLowEnvelope at offset to a poly toolAssigned
0%
Task Description

See:
https://www.qcad.org/rsforum/viewtopic.php?t=6650

1977QCAD (main)Feature RequestLowCorresponding coordinate format Assigned
0%
Task Description

Hi,

It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.

This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.

Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).

1982QCAD (main)Feature RequestLowmeasure DIN 1356Assigned
0%
Task Description

To measure in the format DIN 1356 , Architect
It is hard work to do this manual input with meta characters.

1983QCAD (main)Feature RequestLowTrim All or Bulk Break outAssigned
0%
1 Task Description

This is a trim method I am missing in Qcad.

20 years ago it existed in CadKey.
You had a bunch of lines or segments.
You defined a (new) line or segment as cutter.
‘Trim All’.
You pointed at the side of the cutter entity to trim all intersecting at that side.

Pritty the same as in this topic:
https://qcad.org/rsforum/viewtopic.php?t=5221

Only in rare cases I can use Husky’s workaround as pro.
It all depends on what else is in the clipping rectangle that is needed to trim all intended.
If of no use all single crossing entities have to be chosen one by one.

Regards,
CVH

1999QCAD (main)Feature RequestLowViewport: Add additional properties for controlling dim...Assigned
0%
1 Task Description

When working with multiple Viewports with different scale it could be very useful to have extra properties controlling how dimensions are rendered in the viewport:

1)
E.g an extra “Dimension Scale” under “Scale” in the Viewport selection’s ‘Specific Properties’ section, could allow having the same size when printed.
This Dimension Scale would be multiplied on top of the Scale value, but only for Dimensions rendering.

2)
Toggle button for hiding any dimensions in the Viewport. Maybe this should be controlled by being able to specify a Layer that should be hidden in this Viewport only, then I could select my Dimensions layer here.

The Viewport properties:
https://i.imgur.com/s07JtaB.png

 6 QCAD (main)Performance IssueMedium Auto snap near splines Closed
100%
Task Description

Move cursor near spline, e.g. when drawing line with auto snap active.

 112 QCAD (main)Performance IssueLow Slow startup because of Library Browser Closed
100%
Task Description
  • initial start (no library browser DB present)
  • Linux vostro 2.6.37.6-0.5-desktop #1 SMP PREEMPT 2011-04-25 21:48:33 +0200 i686 i686 i386 GNU/Linux
  • DWG / DXF files: 79
  • SVG files: 684
  • RDF files: 729
real    1m37.298s
user    1m35.101s
sys     0m0.806s
 169 QCAD (main)Performance IssueLow Image preview slow Closed
100%
Task Description

Preview when inserting image slow

 201 QCAD (main)Performance IssueLow unable to move/dock command line Closed
100%
Task Description

Cannot move/dock command line to right hand pane!

Regards

clive

 233 QCAD (main)Performance IssueLow Slower selection / manipulation Closed
100%
Task Description

Slower selection / manipulation compared to QCAD 2.

 244 QCAD (main)Performance IssueLow snap auto Closed
100%
Task Description

Snap defaults to auto. Auto snap gets slow in areas where there are many places it can snap to.

 288 QCAD (main)Performance IssueLow opening dwg file takes very long [improved] Closed
100%
Task Description

Opening a 4 MB dwg file results in no-response for about five minutes. Opening the same file with DraftSight takes less than five seconds.

 360 QCAD (main)Performance IssueLow Application Preferences - Shortcuts (slow) Closed
100%
Task Description

In the “Application Preferences”-menu a click on submenu “Shortcuts and Commands” freeze the application for a view minutes.

 391 QCAD (main)Performance IssueLow Complex blocks: moving with drag and drop shows whole b ...Closed
100%
Task Description

Complex blocks: moving with drag and drop shows whole block as preview (slow)

 673 BookPerformance IssueLow Library - Symbols Closed
100%
Task Description

Library - Architecture is showing only four (4) symbols:
“ffl, north, uparrow and winv”.
Is this correct?

Thanks in advance

Regards

Reinhard(RM)

 914 QCAD (main)Performance IssueLow Invert selection: poor performance Closed
100%
Task Description

Inverting the current selection is significantly slower than select all, deselect all or other selection tools.

 1029 QCAD (main)Performance IssueLow Selecting many entities: poor performance Closed
100%
1 Task Description

Selecting a great number of entities (>10000) can be slow, likely due to updating the property editor.

 1052 QCAD (main)Performance IssueLow (Isometric) projection: poor preview performance Closed
100%
Task Description

Preview performance can be improved by projecting only once and then moving / pasting the projection.

 1115 QCAD (main)Performance IssueLow Windows: slow file dialogs Closed
100%
Task Description

Windows 7 Professional 64bit SP1

File > Open shows empty dialog for 1 minute, then shows dialog contents.

 1123 QCAD (main)Performance IssueMedium Hatch in block causes performance problem Closed
100%
Task Description

Hatches in blocks cause poor performance while (auto-)snapping.
The lines that make up those hatches are included in the search for intersection points which is not desirable.

 1305 dxflibPerformance IssueLow Bottleneck in DL_Dxf::toReal caused by std::locale Closed
100%
Task Description

Loading any larger dxf file takes very long because of this line:
istr.imbue(std::locale(”C”));

The call to std::locale is very slow. File-loading can be speed up by approximately factor 5 times on my system when replacing it. I just removed that line and instead added the following in DL_Dxf::in so it is changed only once per file:

std::locale oldLocale = std::locale::global(std::locale(”C”)); // use dot in numbers
while (readDxfGroups(fp, creationInterface)) {}
std::locale::global(oldLocale);

 1315 QCAD (main)Performance IssueLow Snap > Auto Snap: slow when snapping to complex polylin ...Closed
100%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3838

 1497 QCAD (main)Performance IssueLow Autosnap: hangs with very complex splines Closed
100%
Task Description

Splines with hundreds of control points or fit points can cause hangs when using auto snap near them.

 1606 QCAD (main)Performance IssueLow Selecting 'Draw Order' halts system temporary Closed
100%
Task Description

Merely clicking on ‘Draw Order’, and usualy unintended, halts the system for several seconds up to several tens of seconds.

Intel(R) Core(TM) i7-2600K CPU @ 3.40Ghz
4,00 GB RAM installed 3,49 GB usable
32-bit Operating System
Windows 7 Professional SP1

 1610 QCAD/CAMPerformance IssueLow Switching from one drawing to another slow Closed
100%
Task Description

When switching from one drawing to another, the 3D view is updated which can be slow, especially for drawings with many text entities.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4945

 1662 QCAD (main)Performance IssueLow Select > Select Contour: slow for complex drawings Closed
100%
Task Description

Hi!

when working with files containing many not connected elements (non-poly-line elements) a double click can cause a coffee-break easily. The search for connected entities easily takes over 5 minutes on an up to date machine ([email protected]) with files that are pretty standard in size (2 or 3 MB file size ascii dxf). Adding an interruption-method would be suitable (for example by pressing escape).

attached a file with a polyline of 13000 entities and a second file with just everything duplicated. When exploding the polyline and double clicking an element it takes quite a while until all elements are selected. (this is not an extreme example, I had sometimes 10 minutes of waiting with slightly bigger files, accidently double clicking something).

also an improved algorithm for the search would help to speed up the selection. (e.g. divide the area in smaller parts, do the search there, or an option to search only in the visible view port of the document)

Martin


 1693 QCAD (main)Performance IssueLow Formatted text is not correctly displayed Closed
100%
1 Task Description

Texts justified and/or formatted in dxf or dwg files generated by Autocad not presented correctly when the file is opened by QCad, follow file for verification.

 1970 QCAD/CAMPerformance IssueMedium Drill Toolpath Workaround Closed
100%
Task Description

Hallo Andrew,

Fiddling with the drill-toolpath error, a solution seems to be to add the drill location as a ‘single point’ in the ‘source’ sublayer. I am using this as a Bug Work Around.

 1984 QCAD (main)Performance IssueLow Block > Create Block from Selection: Slow for large num ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6672

728QCAD (main)Performance IssueLowSlow loading of drawing with many block insertsAssigned
0%
1 Task Description

Slow loading of drawing with huge number of block inserts (more than 10000).

1801QCAD (main)Performance IssueLowlow perfomance in paper space and viewportsAssigned
0%
Task Description

Improving the performance of the exceptional use of the processors when switching from the model to the paper space (testing with the attached file) the functionalities of the commands for the viewports are too low in the paper space.

 137 QCAD (main)RefactoringLow SVG Export precision Closed
100%
Task Description

In files exported with the (even PG) exporter I sometimes see values like these: 334.99999999999994 or 570.0000000000001 and very often 12 digits of precision.

To safe on file size, I suggest, that QCAD rounds values on SVG export to eg. three places. When viewed in an ordinary web browser, that will result in a precision of 1 inch / 96dpi / 1000 = 0.00026mm, not? Ends should still meet.

 138 QCAD (main)RefactoringLow SVG Export entity properties "By Layer" and "By Block" Closed
100%
Task Description

If I understand correctly, SVG export uses svg groups to keep QCAD block entities. This in itself is very useful. There is no way to correctly keep layer information, as QCAD blocks can contain elements on different layers, while SVG only knows about groups. That is a deficiency of SVG.

To save on file size, there was some potential to get rid of ever repeating same attributes on entities, eg: style=”stroke:#000000;stroke-width:0.25;stroke-dasharray:2.16,1.08”

To optimize “By Block” is easy: just set the attribute on the SVG group, and omit on below entities styled “By Block”.

To optimize “By Layer” is a little more involved, but might be solved by using css:
- Create a class by the name of the Layer
- add the class attribute to elements styled “By Layer”

Then only individually styled entities would get a style attribute, and filesize of SVG could be halved in most cases.

This just an idea :) Having written this, I now realize, that QCAD can style weight, pattern, color each extra, so the optimazition could only be applied to entities, where everything is “By Layer” or “By Block”. But that should be the case most of the time.

 146 QCAD (main)RefactoringLow cloning entities: optional ID cloning Closed
100%
Task Description

add parameter to REntity::clone to allow cloning without cloning object ID.

 610 QCAD (main)RefactoringLow replace QMdiArea with QTabBar and QWidgetStack Closed
100%
Task Description

QMdiChild widgets in an QMdiArea receive repaint and mouse events even if they are not active which slows down the user interface when having multiple MDI children open.

Long term, QMdiArea might have to be replaced with something else.

Showing tasks 1901 - 1950 of 2011 Page 39 of 41<<First - 37 - 38 - 39 - 40 - 41 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing