QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  ascSeveritySummaryStatusProgress
 62 QCAD (main)Feature RequestVery Low Context Menu "Change preferences" Closed
100%
Task Description

Provide context menu that shows “Change preferences”

  1. opens the preference dialog
  2. shows the appropriate page

E.g. for

  • library browser (to set library sources)
  • graphics view (to set colors)
  • ruler (to set drawing unit)
 431 QCAD (main)Feature RequestLow Construction lines Closed
100%
4 Task Description

Construction lines (’infinite’ lines).

1705QCAD (main)Feature RequestLowConnect certain actions and layersAssigned
0%
1 Task Description

When dimensioning my drawings I always want the dimensions to be on the dimensions layer.
When adding text I want the text to be on the text layer.
When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer.
When drawing a line segment it almost always is on my outline layer.

So I propose a new option to bind certain actions to certain layers.
Whenever those actions are selected the layer should automatically be switched.

I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.

670QCAD (main)Feature RequestLowConfigurable rendering options for stacked textAssigned
0%
Task Description

Customer wishes that stacked text used as subscript is rendered differently (i.e. increased text size, lower position for subscript).
This may also apply to superscripts.

 671 QCAD (main)Feature RequestLow Configurable icon size for top toolbars Closed
100%
Task Description

Configurable icon size for top toolbars

684QCAD (main)Feature RequestLowConfigurable behavior for using box selection with Shif...Assigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2180

648QCAD (main)Feature RequestLowConfigurable behavior for line patterns at weight 0.00Assigned
0%
Task Description

A line with linestyle = dots and line weight = 0.00 appears in model space overly spaced, all other lineweights behave as expected.
Suspect other linestyles to behave in a similar fashion.

See attached drawing.

Suggested fix: use the same scaling for lineweight 0.00 as for lineweight 0.05.

 800 QCAD (main)Feature RequestLow Configurable auto snap Closed
100%
1 Task Description

Enable / disable individual snaps for use with auto snap.

 1144 QCAD (main)Feature RequestLow Commands history toolbar Closed
100%
Task Description

A new toolbar that shows the last 5, 10 or so commands buttons used would be useful to do repeated tasks on a lot of drawings.

 207 QCAD (main)Feature RequestLow command line: shortcut for activation Closed
100%
Task Description

Unable to use space bar to focus on command line to type in commands etc as in Version 2. Need to click in the command line first in order to do so - much easier to use press space bar!

 1232 QCAD (main)Feature RequestLow Command Line: ignore leading spaces Closed
100%
Task Description

Many times, after pressing the space bar to access the command line, accidentally an space character is added at the start of the line. It’s very difficult to see it.

The result is an error like this:

Invalid coordinate or distance ' @20,20'.

The request is for the command line parser to just ignore leading spaces.

Thank you.

 527 QCAD (main)Feature RequestLow Command line option to use alternative location for con ...Closed
100%
Task Description

Speziell gedacht für den Mobilen Einsatz wie z.B. auf einen USB-Stick um bei wechselnden PC Einsatzorten immer wieder die einmal gemachten Einstellungen für QCad benutzen zu können.

Siehe auch hier:
http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5888#5888

873QCAD (main)Feature RequestLowcommand line does not accept distance value for funtion...Assigned
0%
Task Description

In the comnmand line, I can sucessfully enter for example the radius of a circle to draw (Space 100 Enter) but the command line does not accept a value for the distance when drawing parallel lines (l p space 100 enter → error).

277QCAD (main)Feature RequestLowcommand line arguments: allow class name after -execAssigned
0%
Task Description

command line arguments: allow class name after -exec

 454 QCAD (main)Feature RequestLow combined move/rotate/scale with two reference points Closed
100%
Task Description

It would be extremely helpful, if marked objects could be moved/rotated/scaled in a single step with two reference points as source and two reference poitns as destination. With a tool like this, “should match”-drawings could be merged easily.

1452QCAD (main)Feature RequestLowColour opacity optionAssigned
0%
1 Task Description

Not sure how difficult this would be to implement but just wondered if it is possible to have an option in QCAD to change the opacity of a colour ?

related to topic: http://www.qcad.org/rsforum/viewtopic.php?f=83&p=15715&sid=45f0f0679e8257f3cf98f91e4f0c4577#p15715

 761 QCAD (main)Feature RequestLow Colour Indicators for Layer List Closed
100%
3 Task Description

Layers are great for organizing a project. For construction lines alone I sometimes use 3 and more layers. And then there are more layers for each part I design. Each with its own colour.

And when a project gets bigger I start wishing for a quick overview in the layer list to the colours I use on them. So I wish for colour indicators on the layer list to quickly identify the membership of a line to a layer.

I have a small image attached to make you see, what I mean.

609QCAD (main)Feature RequestLowClean up toolAssigned
0%
1 Task Description

To have a ‘clean up ' tool to:

- eradicate duplicate lines
- eradicate stray points
- remove empty layers
- remove unused blocks

Perhaps with an initial dialog which allows the user to choose what they want to clean up.

 858 QCAD (main)Feature RequestLow Circle/Arc tangential on entities ... Closed
100%
Task Description

I’m not sure but if this is a duplicate please delete!

Feature Request:
It would be nice to have a tool what will help to draw tangential circles and arcs between other entities.

I imagine this tools with a three entities (circles, lines) selection or two entities plus a radius.

 292 QCAD (main)Feature RequestVery Low Choose number of copies when using 'snap with distance  ...Closed
100%
Task Description

Choose number of copies when using ‘snap with distance to end’.

This might make sense for certain tools only.

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1643

1282QCAD (main)Feature RequestLowChangeable color of the selection bar in layer list. Assigned
0%
1 Task Description

Changeable color of the selection bar in the layer list.
Now the color of the bar is darkblue and the underlaid icons are black and are not readable.

1651QCAD (main)Feature RequestLowChange thickness of arch tick for dimensioningAssigned
0%
Task Description

An option in the drawing preferences to change the line thicknesses for arch ticks would be a huge plus, at the moment I am having to insert ‘arch tick’ blocks for this.

525QCAD (main)Feature RequestLowchange the printed symbol of pointsAssigned
0%
Task Description

Hi,

in QCAD3 RC2 points were printed as crosses, in QCAD3 RC4 they are printed as (very little) points. I think this isn’t a bug but a feature. ;-)

It would be nice if one could change this behaviour / select the symbol of points.

Best regards - Stefan

This is a double post of http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5870#5870 as suggested there.

1810QCAD (main)Feature RequestLowChange icons from black on white to white on black depe...Assigned
0%
1 Task Description

Automatic change of icons in the Library Browser from black on white to white on black or vice versa depending on the background (white or black; light or dark) in QCAD main window.
See also https://www.qcad.org/rsforum/viewtopic.php?f=31&p=21970#p21970

1255QCAD (main)Feature RequestLowChange a quote value modify the drawing + link quotes w...Assigned
0%
Task Description

Change a quote value modify the drawing + link quotes with entities

In other words, makes quotes editable AND linked to entities.

  • Today in the properties, the value is read only. Being able to edit the value would modify the linked entity properties to fit the new quote.
  • Changing a property would change the linked quotes accordingly. Today, if I change a circle diameter which is quoted, the quote remain where it was and is no more relevant.
 259 QCAD (main)Feature RequestMedium Chain dimensions Closed
100%
11 Task Description

Chain dimensions

1838QCAD (main)Feature RequestLowCarbide Create importAssigned
0%
Task Description

Add support for importing Carbide Create files (.c2d).

Format is JSON based, human readable.

 556 QCAD (main)Feature RequestLow Can't change entity's layer by double-click Closed
100%
Task Description

Hi,

One thing not in the v3 (but in the v2) is the ability to assign a layer to an entity by double click on the layer name (in the layers list)

On V 2 :
1 - Select entity
2 - Double click on the layer’s name

> then le entity is in this layer

On V 3 :
1 - Select entity
2 - Double click on the layer’s name

> nothing change

It’s useful to change it by this way, please make it possible in v3.

1901QCAD/CAMFeature RequestLowCAM Traverse ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very common Traverse Toolpath.

Example added as pdf.

Greetings

 1914 QCAD/CAMFeature RequestLow CAM layer On/Off Closed
100%
Task Description

Hallo Andrew

If CAM layer invisible do not 3D Simulate and do not write G-code.

1902QCAD/CAMFeature RequestLowCAM G-Block ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very handy G-code Block Toolpath. This ‘toolpath’ also solves a lot of “editing requests”.

2227QCAD (main)Feature RequestLowCAM > CAM Export: post processor for tangential knife c...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=2&t=8342

1940QCAD/CAMFeature RequestLowCAM > CAM Configuration: Add program descriptionAssigned
0%
1 Task Description

Add a program description to the CAM configuration dialog and export to postprocessors as variable.

See also:
https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649

1402QCAD (main)Feature RequestLowCAD-Toolbar, Toolbar, Menu, Tool Matrix with customized...Assigned
0%
Task Description

Would it be possible to arrange the Menu, CAD-Toolbar, Toolbar, Menu, Tool Matrix with customized keywords, like “simple”, advanced” and “expert” to show only a minimum for user there are begin with CAD, advanced for CAD-User, and expert for construction.

 320 QCAD (main)Feature RequestLow CAD Tool Bar: Back button should go back one menu Closed
100%
Task Description

CAD Tool Bar: Back button should go back one menu. Possibly use two buttons, one to go back to the previous tool bar, one to go back to the main tool bar.

 1611 QCAD (main)Feature RequestLow Cabinet projection at 30 degree also Closed
100%
Task Description

Hi Andrew,

Cabinet projections are usually drawn at 45 or 30 degrees, having drawn up many furniture configurations over the years, would it be possible to add options for 45 and 30 degrees at all?

Regards

Clive

 623 QCAD (main)Feature RequestLow C++ plugin interface Closed
100%
Task Description

C++ plugin interface to add functionality from existing C / C++ libraries to QCAD.

 819 QCAD (main)Feature RequestLow Bring back option to make Hatch patterns in .dxf for QC ...Closed
100%
Task Description

Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2445

 256 QCAD (main)Feature RequestLow Break out segments of ellipses Closed
100%
Task Description

Break out segments of ellipses

396QCAD (main)Feature RequestLowBlocks: moving blocks: show bounding boxAssigned
0%
Task Description

Blocks: moving complex blocks with drag and drop should show bounding box as preview

316QCAD (main)Feature RequestLowBlocks list and selected blockAssigned
0%
1 Task Description

Wouldn’t it be nice, if selecting a block in model view would somehow highlight (just like clicking a block in the list does) the selected block in the “Block List” window?

(Feature request sounds a little harsh, enhancement proposal would seem more apt.)

 748 QCAD (main)Feature RequestLow Blocks ... Closed
100%
Task Description

It would be nice ...

- to be able to use " and / in Block names what is really helpful in the Inch and Fraction world ... ;-)

- the ability to overwrite an existing Block what is often much easier/faster than editing a Block ;-)

- After selecting a Block you get the info of the Block name in the Property Editor (Geometry / Referenced Block).
If I need to edit this Block I have to go to the Block List - have to search for this name because it is not marked .... and of course it is a long long list.
It would be nice to have a “Edit this Block” Button in the Property Editor / Geometry / Referenced Block dialog ... ;-)

614QCAD (main)Feature RequestLowBlocks - overwrite current layer yes/no ...Assigned
0%
Task Description

I would appreciate an option for the library Browser that gives me the possibility to decide by my self to use the current (same name) layer in my drawing or overwrite it with the existing layers in the library item.

Imagine the possibility’s of this feature .... ;-)

 555 QCAD (main)Feature RequestLow Blöcke zählen .... Closed
100%
Task Description

Eine Zählfunktion die erfasst wie oft ein Block in einer Zeichnung vorhanden ist.

Hintergrund ist das es damit eine Unterstützung gäbe die das erstellen von Stücklisten etc. erleichtert würde.

Die Anzahl der Blöcke könnte z.B in der Block List eingeblendet werden wie z.B.: “Schraube M6x40 (17x)” oder auch in einer extra Text Liste.
Zudem könnten so auch nicht (oder nicht mehr) benutze Blöcke ermittelt werden wie z.B. “Schraube M6x20 (0x)” welche dann aus der Zeichnung entfernt werden könnten.

Siehe auch:

http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=1920

 558 QCAD (main)Feature RequestLow Blöcke aus dem Editiermodus direkt in der Library speic ...Closed
100%
Task Description

Blöcke aus dem Editiermodus direkt in der Library speichern zu können wäre eine erheblicher Arbeitsersparnis.

Wenn ich persönlich einen Block in einer Zeichnung erstelle überlege ich mir natürlich gleich ob ich diesen nicht auch in anderen Zeichnungen verwenden könnte. Somit erhalte ich leicht eine Umfangreiche Library die mein Leben leichter macht .... ;-)

 265 QCAD (main)Feature RequestLow Block Attributes Closed
100%
1 Task Description

TODO:

  • Ask user to enter block attribute values when inserting block
  • If attribute definition changes (tag changes), update attributes accordingly (note that other CAD systems don’t do this)
  • Support for multiline attributes
  • Control order of attributes (as shown to user in property editor, when inserting blocks)

DONE:

  • Defining new block attribute definitions (constructing block attribute definition entities)
  • Editing block attribute definitions (property editor)
  • Synchronize attributes based on attribute definitions (position, angle, size, ...)
  • Loading block attribute definitions from DXF / DWG
  • Saving block attribute definitions to DXF / DWG
  • Loading block attributes from DXF / DWG
  • Saving block attributes to DXF / DWG

Related commands: DDATTE, ATTEDIT, ATTDEF

 86 QCAD (main)Feature RequestLow Block arrays Closed
100%
Task Description

Support arrays of block inserts.

1080QCAD (main)Feature RequestLowBitmap export: calculate size based on bounding box inc...Assigned
0%
Task Description

I have created a drawing, where the CENTERS of the most outer lines have a distance of 3.06mm in both X and Y.
The line weight of these outer lines is 0.6mm, so the whole image is 3.06mm + 2* 0.6mm/2 = 3.12mm wide and long (center to center plus half of the line weight on every side).
Additionally in the export there is a frame around the image, making it 3.12 + 2*frame.
The export function however calculates 3.06mm when setting the resolution to 1000Pix/cm, so it does not include the line weights and the outer frame.

1169QCAD (main)Feature RequestLowBitmap clippingAssigned
0%
Task Description

Clipping bitmaps to only show a part of the image.

See:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3263

 359 QCAD (main)Feature RequestLow Bigger lineweights Closed
100%
Task Description

Currently lineweights seem to be available up to 2.11mm,how about extending the range for some bigger lineweights!

Regards

Clive

Showing tasks 2001 - 2050 of 2266 Page 41 of 46<<First - 39 - 40 - 41 - 42 - 43 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing